No sound after Windows updates - don't Please Help!

Similar Questions

• NO SOUND AFTER WINDOWS UPDATE 8

  Hello

  Please help me, lost after installing important updates for Windows Mobile 8, all audio sounds. I don't know what happened. Bearly need an audio. Thanks in advance.

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT HD Audio Installer - Windows 8.1

  IDT HD Audio Installer - Windows 8

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Disconnect the power adapter and remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click "Speakers/HP" once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• No Logitech G35 headset sound after Windows updates

  Original title: last updated

  Twenty minutes earlier on 11/08/2011 my self out of the windows updated. After the update has been installed and restarted my computer, my logitech g35 headset is not working properly. If I turn them off in the control panel and reactivate as default device, I get 1-3 seconds of the sound before they be cut again. So two questions. 1 What is this happened to someone else. 2. how to fix it.

  Hi Hexter23,

  1. what application you are trying to use the headset?

  2 update did you recently installed on the system?

  3. are you able to hear the music / sound through normal speakers?

  Method 1:

  You can consult the following link and run the troubleshooter of audio playback, if it helps.

  Tips for solving common audio problems

  Method 2:

  If the previous step fails, then manually, download and install the latest audio drivers for the card its installed on the computer by visiting the sound card manufacturer or computer manufacturer's website and check if that helps.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• No sound after Windows update

  Automatically updating Windows and now I have no sound. If I play something about winamp output volume meter shows that it plays but no sound, I checked the speaker system on another computer and it is also ok. It seems that a few other people have the same problem.

  Hello

  There are 2 ways to solve this problem:

  Go to your computer, or your sound card, the manufacturer Web site > looking for drivers and downloads Section > put in your computer or sound card (if you installed it yourself) model number > find your operating system > download and install drivers etc you will find Audio.

  __________________________________________

  Microsoft gives sometimes you updates for the 3rd party hardware: Audio, graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Cannot connect to internet after Windows update. With the help of windows 7 on a brand new computer

  Just got a new laptop last week... The internet worked right out of the box... Now last night I let windows do a big update, and now my internet does not work...  It says something about "connects to the DNS servers.

  So I did a system restore to an earlier time, and the internet works fine...

  which ____ should I do?

  Hi 31aboy,
   
  Welcome to the Microsoft Answers community.
   
  Try to install the update to windows in clean boot mode.

  To enter the mode of clean boot on your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. now run windows update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
   
  If you are facing the same problem even after installing the update in clean boot mode, then check the update in windows update history and send me the update name.
   
  Steps to view the windows update history:
   
  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• No sound in flash player don't please help = S

  title and summary says it all, please help me :)
  < edit >
  fixed, it don't you worry
  < / Change >

  title and summary says it all, please help me :)
  
  fixed, it don't you worry
  

• Vista Home Premium no Internet after Windows updates don't Help please!

  
  

  Have you tried the following?

  Windows Vista

  To start the Wireless Auto Configuration in Windows Vista, you must log on as an administrator.

  • Click Start and Control Panel
  • Select Administrative Tools , then Services
  • In the Services box scroll down the list of Services (Local) until you find one marked Wired AutoConfig and double click it.
  • In the Wired AutoConfig properties (Local computer) box, change the Startup type to Automatic
  • Click Start and once the service has started, click OK
  • Now find the marked service WLAN AutoConfig and double click it.
  • In the service of autoconfiguration WLAN (Local computer) properties box, change the Startup type to Automatic
  • Click Start and once the service has started, click OK
  • Navigate to the file and Exit to close the Services window

• Tecra 9100 - loss of sound after Windows Update.

  I just got my hands on a 9100 second hand and have been re - install XP Pro. I was going well and had everything except the card SD not working after downloading all the drivers concerned off Toshiba site.

  Micorsofts update the site decided to download new drivers for the card his Yamaha, and now it says NO device.

  I reinstalled the drivers from the toshiba site, but despite everything I do, it still shows no device.

  Ive tried reinstalling the software Synth as well, but having said that I need to run the re-installation of synth program. But there is no directory on the drive for what Yamaha and no entry in the Add/Remove for yamaha synth window or in the start menu.

  I'm at a loss where to go then, short from once again and re-installing the OS to the top, and it's a good day's work.

  Is a cleanup utility exists then I can just redo the part of sound card?

  Help please. :-(

  Hello

  It seems that there is a problem with his Yamaha card driver after the installation of the Microsoft Windows XP SP2.

  Seems that you need to update the audio driver of Yamaha!

  After a short investigation, I found this site:

  [Do not install SP2 if you have a card his Yamaha AC - XG | http://www.housing.hawaii.edu/resources/support/yamahaac-xg.htm]

  Best regards

• spectrum 360: no sound after windows update

  Hello

  As a result of an update to windows 10 for the anniversary edition, I had problems with the sound.

  It says the audio device not detected.  I uninstalled the audio drivers and reinstalled them and it will work, but after restarting the computer, it gives the same error.  Sometimes a reboot it will work again, otherwise have to reinstall again.

  I couldn't run constantly, so I restored windows on the previous generation and it works well again.

  Anyone had this problem or could fix?

  Thank you

  Thank you.

  I ended up doing something like that.  I uninstalled the program conexant himself and installed an older driver (9.0.57.0), and so far it has worked.  I got the driver from the hp support page.

  The new driver worked until a reboot, then had to be reinstalled again.

  I thank once again.

• Have no sound after Windows update in Windows Vista.

  I have windows vista and just did an update, now I have no sound...  I have a Toshiba laptop.  I tried to do a restore point for two different days, but it keeps giving me an error.  I have no sound, so now what?

  Try to download and run this troubleshooting:

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/AudioPlayback/

• HP - Beats special edition Mo: key USB not working do not after Windows 7 installation. Please help.

  HP - Beats special edition
  Model: 15-p030nr REF: 7018105

  Problem: 3 USB ports do not work. Does not recognize devices plugged into one of the PORTS.

  I installed Windows 7. I have install all drivers listed on http://support.hp.com/us-en/product/HP-Beats-Special-Edition-15-p000-Notebook-PC/6936229/model/71742...

  I noticed that there are not any folder driver CHIPSET.

  Already tried CHOKE START/MANAGER/upgrade to driver UPDATES. None could be found.

  Please notify.

  Hello:

  See if downloading it and installing the drivers from the chipset amd works for you.  Restart after the installation.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• In input/out live telephone calls have "broken" sound only after updating to iOS 9.3 update on 6, please help...

  All entry/out live telephone calls have 'broken' sound only & unable to play the music on my phone after update to iOS 9.3 update on 6, please help...

  Hi there dmaclatchy,

  It sounds slipped you can not use the app phone on your phone, because the sound is uneven or inaudible and something is happening with your music do not let play. I want to quit all applications running on the phone:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Let us know how it goes! Thank you for using communities of Apple Support.

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• After windows update, I tried to reinstall acrobat adobe XI that installed fine, but when I opened it, the language had changed into a kind of Cyrrilic alphabet. Weird! During installation I choose English as my tongue so have no idea what's going on

  After windows update, I tried to reinstall acrobat adobe XI that installed fine, but when I opened it, the language had changed into a kind of Cyrrilic alphabet. Weird! During installation, I choose English as my tongue so have no idea what's going on here. Any experience with this? I used the same dvd that when I initially installed so should have come out as done original installation in ' English.

  Hi rebrad999,

  Please see the following KB doc on this topic: error 'incompatibility of language between the entered serial number and language of launch Acrobat | Windows

  If the problem persists, I recommend you to uninstall acrobat and reinstall it after you download it from the following link: download Acrobat products | Standard, Pro | DC, XI, X

  Kind regards

  Rahul

• Laptop Presario CG56: CG56 crashed after Windows Update

  After Windows update, set during the race, woke to find a "scree Orange" with the logo of Compaq.  Press F11 to enter in recovery mode has organized the restoration of the system for each restore point.  Finished with 0x8000ffff.  A ran the recovery system completely at the end.  Finished with the Orange screen.  Minimized ran impage recovery all the way to the end.  Repeat screen Orange.

  I find that the BIOS is corrupted in Windows Update, somehow.  I can get to the line of command in recovery mode, but I don't know what to do.

  Help!

  Me am HP Advanced System Diagnostics V3.0.3.0 by pressing f2 until the screen has finally come.  Do you have the System Diagnostics.

  Have you hard reboot by removing the battery, press the button for 15 seconds, extra power, hit start and the start up like a new PC was started and Windows.