NO SOUND, PROBABLY DUE TO AVG

Similar Questions

• No sound, probably due to IDT Audio Codec

  There I s no sound on my laptop. The speakers are on, Windows said that they are working correctly. All volumes are high, the sound is not muted etc. But I have no sound anywhere. I uninstalled the drivers on IDT Audio Codec, reset values in my bios to their originals (if they are not first). I've been running the windows audioplayback diagnostic. Moved back to the old version of my registry but nothing seems to work.

  I've been through this forum and did what some of the recommended people, but still it does not work. Although windows shows that IDT Audio Codec works fine, I get an errormessage is not able to play the test tone (or is the translation from Dutch). Also, Windows Media player does not work and falls to me on the page with the error C00D11B1. Playback of a DVD does not work. And when you try to update the driver IDT Audio Codec, it says it's updated. Also put all the settings of the sound (as sound to the standard settings).

  I think I deleted the driver when clean with CCleaner if that is probably the reason. Also after checking with this forum, I launched two driverpackages SP59291 and SP6355, but unfortunately they did not work, and they probably have not the right version for my installation. Alhtough the letter of the two has brought back windows system signals to start etc.  The current version of the driver is 6.10.6329.0. I checked the site to find the specific version for my HP laptop, but couldn't find it, no matter who any idea what I could do? Thank you very much!

  HI @HenriBlommers

  Thank you for your request, I will do my best to help you!

  Be sure to include your exact model on laptop during validation to allow us to help you more efficiently.

  I understand that you have no sound on your laptop. Device manage States it is enabled and working.

  As I don't know your exact model laptop that I can not find the driver, however you can restore the original driver by using the Recovery Manager.

  Here is a link to the HP notebook computers - fix no sound or Audio problems in Windows 7. There is a section on restore the original drivers to help you.

  Have you ran the Windows troubleshooting tool to help you?

  Here is a link to MSFix it which can also help.

  Have you checked for virus or malware?   Microsoft Malware removal tool

  Did you run HP Support Assistant using the HP updates?

  To search manually HP updates please enter your exact model and follow prompts to view your drivers and updates for your system.

  Heres is the link for HP drivers & downloads.

  Good luck!

• No sound, probably due to the update of windows

  Just a windows update last night, no sound at all on my computer now. Equipped with Vista.

  Just a windows update last night, no sound at all on my computer now. Equipped with Vista.

  =======================================
  Perhaps the following goods range offers a few ideas:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

  Windows Vista-
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  (948481) how to troubleshoot sound
  problems that you experience after having
  install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Blue screen: Plug and Play detected an error, probably due to a bad driver?

  Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver?

  I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death appeared saying that "Plug-and-Play detected an error, probably due to a faulty driver. She also asked me to 'Disable the BIOS memory options such as caching or shadowing the' but I don't know how to do this, because it does not appear on my BIOS settings. In addition, the message suggested that I go on safe mode, but whenever I try to go on Safe Mode, the Blue Screen of Death keeps re-appearance, so I can not go on Safe Mode or the other. And one other weird thing is that when I press F8 (press the key to early startup options) I get to select an operating system to start: Microsoft Windows XP Embedded which is weird, because as I said, my OS is Windows Vista and I don't have any other OS installed in my laptop. How can I solve this problem?

  Hi,                                                      Part 1 of 3
  (There is a 4 part added)

  These methods as well as those in the next 2 posts to troubleshoot BlueScreens. You
  can also post information that you store in a message in these forums.

  You can solve this a bit on yours with these little free programs.

  1. use BlueScreenView read minidumps and note the BCCode or stop codes, the Cause and
  the time.

  2. run MyEventViewer and search the entries at the time or a second (or) more before the BCCode
  or stop the BlueScreenView Codes.

  3. look for the code on FaultWire - ago usually excellent solutions.

  0x00000000 to 0x00000003F
  http://www.faultwire.com/solutions_index/fatal_error-1.html#IssueList

  0 x 00000040 to 0x0000007F
  http://www.faultwire.com/solutions_index/fatal_error-2.html#IssueList

  0 x to 0x000000BF 00000080
  http://www.faultwire.com/solutions_index/fatal_error-3.html#IssueList

  0x000000C0 to 0x000000FF

  0x00000100 or higher
  http://www.faultwire.com/solutions_index/fatal_error-5.html#IssueList

  4. position the BCCode or stop Codes, settings, the Cause and related information in a message
  detailed in this forum for assistance.

  ---------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =============================================

  Here is the example of the usefulness of BlueScreenView - it is small and automatic so very easy to use.
  With time MyEventViewer TRICK is very simple to check when the BSOD.

  Partial screenshot of BlueScreenView (first 1/2 page)

  

  ============================================
  
  Partial Screen Shot of BlueScreenView (second 1/2 page)

  

  =======================================================

  Double-click the line to dump high component file or file - properties with it highlighted.

  

  =======================================================

  Double click on the bottom panel line of file name or file - properties with it highlighted.

  

  Right-click on a line - report HTML Selected Items.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Number of processors	Major version	Minor version
  041110-22218 - 01.dmp	2010-04-11 22:42:11	NTFS_FILE_SYSTEM	0 x 00000024	00000000' 001904fb	fffff880'065a7bd8	fffff880'065 has 7430	fffff800'02c7c0c4	NTFS.sys	NTFS.sys + 213d8	NT file system driver	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6000.16386 (vista_rtm.061101 - 2205)	x 64		2	15	7600

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have improved my 5 LR to LR CC 2015. I realized that the LR Catalog backup file (which accumulates during the exit process) fell 2.8 GB (LR 5) to 270 MB, probably due to compression. Can I be sure that the shrunk backup file contains everything what he

  I have improved my 5 LR to LR CC 2015. I realized that the LR Catalog backup file (which accumulates during the exit process) fell 2.8 GB (LR 5) to 270 MB, probably due to compression. Can I be confident that the shrunken backup file contains everything it should?

  Lightroom CC 2015 to zip the backup catalog file, it should be much smaller. So, based on what you said, I see no evidence that something has gone wrong.

• No noise in web browsers, probably due to the update of windows

  Background-

  A week ago, my browser (firefox) has stopped playing all sounds. Spotify, Winamp, etc. were all still works fine, so I assume that it was not pregnant-related, but rather something to do with the browser. I checked the updates of the plugin, flash etc, everything was up to date. I tried another web browser (Google Chrome), same problem. I then tried the things usually offered on the internet such as checking msacm32.drv is present, check that nothing is cut in the mixer volume, also attempted to execute a file that fixed my registry, but I received an error. I also ran a codec tweak tool & who said everything was fine.

  I ran out of ideas so don't have a restored system about a week ago (about when I thought that the problem started), and voila, my sound was back.

  However, windows this morning updated itself (I'm on windows vista), and now my sound disappeared again. As I am quite computer illiterate, I am struggling to understand what is causing the problem.

  The installed updates today were:

  http://img.Photobucket.com/albums/v19/Magdalena/windowsupdate.jpg

  Hey SarahMagdalena,

  Step 1:

  Try resetting Firefox and Mozilla browsers.

  Step 2:

  You can see the below article to check sound issues in Firefox.

  http://support.Mozilla.com/en-us/KB/no+sound+in+Firefox

  Kind regards

  Savan - Microsoft technical support.

• Why my "Downloads" folder lasts more than five minutes to load? (Probably due by MSE)

  I have a very big downloads folder:
  5 419 files
  759 files
  30.0 GB

  I prefer to keep both as - is; However, recently it has started to take several minutes to load in Windows Explorer. Basically whenever I select the folder (either directly under my account user, either by a "Favorites" link), this green progress bar appears in the path box at the top... He continued slowly for a few minutes until what he finished. The real problem that is boring is that, while it is loading, I can't find (indexed), sort, or do anything. (The cursor shows that it is 'work'). In addition, it happens everytime I go in this directory!

  I'm pretty sure that the problem is with Microsoft Security Essentials. Under the resource monitor, subheading 'disc', dozens, or even hundreds of lines appear with the image of MsMpEng.exe (engine of Microsoft Security Essentials), probably one for each file in my downloads folder. In addition, I have confirmed that the problem disappears if I exclude this directory in MSE. However, I of course want to keep the downloads folder (which is probably the most important record to analyze new elements that I upload them!)

  Finally, I must point out that the column 'Date of access' is updated to the current date/time for about 1/3 of the files and all subfolders. I can't find a pattern for which files have their set "consulted" to date; However, none of these values are more than a month (although I certainly do not have access to many of these files for years.) (I.e. all my files are 'accessible' either immediately or in the past month.)

  Most likely, something to mark these files as 'dirty' every time - I access this folder, so pull up the re antivirus engine - check everything. Anyone know what could be the cause? Is that what I can do besides excluding this MSE folder?

  Thank you very much in advance for your help!
  MikeY

  So, how does it work if you uninstall MSE?

  You can allways then reinstall it

  UPDATE (29/07/2012) (SEE BELOW, NOT QUITE RESOLVED.  :()
  As expected, since excluding the 'downloads' folder of the MSE has worked, uninstall MSE also worked. However, I like MSE and want to analyze my downloads folder ;)
  UPDATE: I think I thought of her! In this case, I was running "Process Explorer" (Sysinternals) on Windows startup and pretty much all the time. Thinking that MSE could be analysis all programs that are running, I moved procexp.exe to another folder and set it at the start of this version.
  Once I did, MSE now allows me to open the file downloads without re - check everything.
  My life-lesson from this: If you run an executable file, make sure it is in a different directory other random files, otherwise MSE will constantly check their.
  Thanks for all your help!
  I will update this as "resolved" in a few days when I am sure that it really worked and it is not a chance.
  MikeY
  UPDATE (29/07/2012) :(
  Unfortunately, I see a few problems. First off, while moving ProcessExplorer for this directory he stopped the analysis of each file, each time, I opened the file, it always scans the first time I open the directory each tile. Only after waiting five minutes the first time I can then move freely in this directory. Of course, this is not ideal.
  
  
  I did some follow-up work on this:
  
  
  • I completely uninstalled MSE. Obviously, it worked. However, I then installed the antivirus NOD32. Guess what? It still freezes when opening the downloads folder! This time, instead of the hundreds of lines of "MsMpEng.exe" - billing in the resource monitor, I see hundreds of lines "ekrn.exe! (I.e., it does the same thing!)
  • I actually just moved into a new downloads folder. I found that can be summed up these kinds of folder names. (I.e., I was able to have a new folder that is displayed when I select "[UserName] / downloads.") In other words, when you download things, it appears exactly the same thing, I'm just getting started with a new directory. However, even if the library and the user subpath now point to the new folder, I change not the absolute path to my old files directory. This way I can keep the countless maps/executable shortcuts, etc. in this mega-file.
  
  
  I still think I've hit on something fundamental here. I hope I've learned why I'm causing AV systems across this large number of files, hay son as he shouldn't be testing of thousands of files that haven't changed.
  
  
  Thanks again!
  MikeY

• Web page does not; probably due to some button / combination mouse click

  If we had a coffee spill on our laptop, which now causes some keys to support every now and then by themselves (quite often in fact), most often it is the Enter key that gets stuck. I believe that this 'feature' combined adequately with the mouse left/right clicks caused some glitch a Web page where the appropriate combination happened, empty load now.

  Today, it happened to my gmail account: through the mails, I noticed something happening on the screen (has been too quick to see what it was, but of course, at least the entry key was stuck) but after that, I can only load gmail with basic HTML, not in the standard display. The other affected page is www.w126-forum.de, empty plain charges. With explore, the German page loads very well.

  No other pages are affected (yet)...

  Hello

  If you have not clicked accidentally specific site dialog box settings - for example. Gmail has an option to switch to the HTML version, simplified - you could try the feature reset Firefox via help (Alt + H) > troubleshooting information.

  (To return to the previous mode, you were using, close the new profile (i.e. Quit Firefox), start Firefox and choose the default user profile.) Alors_que Profile Manager is open, you can also remove the reset your profile (the one containing the random numbers) or the old profile, as appropriate). If the reset is correct, it would be a good idea to delete the old profile as otherwise it would be left intact with the previous data before deletion.

  Profile management

  Profiles Howto

• E540 - crash of Applications probably due to Intel Graphics Driver (Win 8.1 64 bit)

  In Skype when you try to make a call, the program stops working, I googled the question and it seems that others have had similar problems and it was resolved by updating the Intel Graphics driver.

  "Intel® HD Graphics Control Panel" program also does not open, it crashes instantly.

  'Features video ThinkPad' driver fails to install

  I have the latest driver for the Intel graphics card, I got from support.lenovo.com

  OS is Win 8.1 64bits

  Any ideas?

  A Microsoft solution for a different question suggested that uninstall the driver and let windows reinstall it, which I did and now it works.

• Cannot read Blu Rays with software HP DVD play BD and HD DVD

  I have a Pavilion m9060n Vista desktop computer. Running HDMI on a monitor Samsung. It is used to play Blu Rays on the rare times where I tried it, now, it won't. I went through the procedure of updating through Cyberlink and now I'm stuck with this:

  "Do you want to activate your reader now" flashes on the display and the program stops. This happens on multiple disks.

  I reinstalled the DVD playback software, run the Cyberlink BD & 3D Advisor and it passes. I tried to read a comic that I ripped to my hard drive, video playback, but there is no sound, probably due to the fact that he is no longer a healthy option HMDI in DVD playback menu.

  For testing purposes, I have download the Cyberlink PowerDVD 10 trial and everything works fine which must exclude a hardware problem.

  Who did the trick. Everything I threw at it worked well. I tried to do an update, the police is unreadable on my screen and it gave me the opportunity to close this window. Impossible to tell what version it is.

• Does he know that "why can not play Mp3 sound using html5 in BB Simulator Playbook and Smartphone?

  Dear developer,

  I really nead help, so far I can not play mp3 sound after I developed application but in android her beautiful work.

  in the bb Simulator cannot play mp3 and wav its woking, any body know why? and I have prolem "I can't hear an echo of the sound API in the Simulator also mp3, but in android it works well, please give me solution bro, thank you to hear me."

  respect,

  Fery

  This is probably due to a missing codec.  Simulators have not the same level of multimedia support direct devices do.

• Acute left of the touchpad Pro S - sound satellite

  This portable (less than 3 hours out of the box) emits a high-pitched noise very low but boring.

  A google search suggests is not uncommon in the range of Toshiba laptops, but I found no "patches".

  Any ideas? Thanks for any help.

  Hello!

  What laptop Satellite you have exactly?

  It's not easy to say what the reason is for this, but sometimes the sounds are due from the HARD drive. Then maybe you should check the drive using the Drive Fitness Test or you start the laptop without HARD drive and go into the BIOS. You hear the sound without HARD drive too?

  Good bye

• Qosmio X 870: noise hissing sound when you use it with adapter

  Hello

  my laptop makes strange noises when _the battery is fully charged and the power adapter is plugged_ (which is in fact the standard most of the time).

  Someone else has already registered that noise in a different thread:
  [https://soundcloud.com/sergo88/whistle-sound]

  First of all, I think it's the Geforce graphics adapter since the sound changes whenever I scroll upwards or downwards. But he disappers when I unplug the power cord.

  Is no doubt has something to do with the energy of the oder CPU management any component?

  You have an idea?

  > But it disappears when I unplug the power cord.

  I think you should first check if the same noise would be always available with a different AC adapter.
  It is possible that this sound appears due to the defective power adapter

• How to disable the clicking sound on the Satellite touchpad

  I have a problem with the volume of mouse - whenever I hit the key it's like I'm clicking on the mouse and its very noisey.

  How do I turn it off?

  Thank you

  Hello

  Usually, the touchpad does not all sounds.
  I guess you have a USB mouse and sound appears due to the use of this mouse.

  I have no idea what mouse software, it is, but I think you should check the settings within this tool.
  Otherwise, you will need to check the control panel-> mouse
  There are a few options that are available for the mouse and touchpad.

  See you soon

• If you have a valid Windows Vista license, why are there not support which includes downloads of the files we can need to overwrite your file should are corrupted due to a virus or malware?

  I am an unlucky recipient of a laptop with Windows Vista. It came preloaded with Vista... no backup disks or manuals, etc. The restore feature was not turned on, so a restore point has not been set. My WMP will not play wmv or any wmp files. I also have problems with my automatic updates in Windows. I have 10 updates that were not successful, but there are probably pages of the attempts of many times where the updates failed. My Trend Micro Titanium Internet tells me I have a problem in my directory root, which is probably due to an update of Windows that was supposed to protect me from a weakness in Vista, but again once with my updates failed to download successfully, its possible the fix I need is still sitting there... I think it's a shame that MicroSoft is allowed to 'SELL' a product without disk... just a license # and NO manuals. AND not a lot of support for your money... or the other. I spent hours and hours trying to fix myself... using all the resources I can find... look like a dummy, I'm sure, but if I had the software I probably would have deleted from my hard drive and more. It would certainly have saved me MONTHS of frustration. Trend Micro and real human support downloaded the plus version of their software for me and recent, plus a few extras to eradicate certain other pests. To get a human being to help you at MicroSoft? It will be $60, please... Sorry, if I look a little tired, but you guys are supposed to be the best and I feel fuzzy. I have been in sales for a long time. long time AND sold the BEST AMERICAN made cars... CADILLACS, but you know if I take care of my clients after the sale... they would have felt like I do, today... disappointed. If every time they came into the dealership I have loaded the $$ to take care of them, they don't come back to me when the NEW models came out... I made sure they got their cars back washed... and they sent their friends to buy from me. And ILS never thought to buy from anyone else, actually when I left the company, I had a nice little legacy of clients in order to let my protégé.

  Thanks (again) Darin - especially for such a detailed response.

  Looks like you're in the clear, Phyllis :)