No sound, probably due to IDT Audio Codec

Similar Questions

• IDT Audio Codec time Sound speakers but not with headphones on ENVY DV7 series laptop

  I bought my laptop not more than two months ago. Its perfectly played through my helmet literally the day before yesterday.

  Only two changes have occurred since then, first of all I accidentally plugged my headphones into the external microphone jack, then I updated the 'Music' for Windows 8 PC application.

  After my sound stopped working. I restored my PC to a restore point dated before its no longer works in my helmet, however resonates once again that in my speakers (when my headphones are disconnected). When I plug my headphones, sound no longer plays in my speakers but no sound from my headphones either.

  How can I get audio to play through my headphones?

  Product name and number: Envy of HP dv7 Notebook PC C2h74UAR #ABA

  Operating system: 64-bit Windows 8

  Error message: None

  Changes: 1) update "music" app for Windows 8

  (2) accidentally plugged in headphones and external microphone jack

  Hello

  Try the following.

  First of all, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 8

  When reinstalling, restart the laptop.

  When windows has reloaded, download IDT Audio Installer on the link below and save it in your downloads folder.

  IDT Audio Installer - Windows 8.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio with headphones.

  Kind regards

  DP - K

• IDT Audio CODEC came installed on the Windows 7 laptop... now I have no sound.

  Windows troubleshooting indicates that the audio service is not running. What have I done? And how to fix it?

  Hello

  (1) what exactly happens when you try to play sounds on the computer?

  (2) what is the brand and model of the computer?

  (3) have there been recent changes to the computer before the show?

  Method 1: I suggest that you follow the given steps and check if it helps:

  (a) go to start and type services.msc in the search box.

  (b) search for audio services.

  (c) right click on the service.

  (d) select Properties.

  (e) go to the general tab.

  (f) to start a service, select start.

   

  Method 2: No sound: http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is useful.

• NO SOUND, PROBABLY DUE TO AVG

  I lost all sound.  Headphones, speakers, YouTube, CD and computer beeps.  Nothing.  It happened when I installed AVG to take care of a problem of viruses and malware.  I have since uninstalled AVG.   I have a restore point to return AVG forwards, but that was lost in the debacle to get rid of AVG.   I now have SmartPCFixer, but it blocks when I ask him to solve sound problems.  SmartPCFixer had no solution.  I have installed new drivers, run all the tests recommended, installed the RealTek Codec pak, tried a different media player.  Tests on my sound card say that it works very well.  I used Mr. Fixit and all services troubleshooting.   The convenience store said that they have no solution for the problem.   Anyone else have any ideas?

  Utility of third parties who claim to optimize and rarely heart problems to perform no useful function, and in the worst cases can cause system failure

  If a PC off brand start by reinstalling the chipset and audio drivers for this PC manufacturers welcome

  May also run the system, sfc file Checker

  http://http :// www.thewindowsclub.com/how-to-run-system-file-checker-analyze-its-logs-in-windows-7-vista

• No sound, probably due to the update of windows

  Just a windows update last night, no sound at all on my computer now. Equipped with Vista.

  Just a windows update last night, no sound at all on my computer now. Equipped with Vista.

  =======================================
  Perhaps the following goods range offers a few ideas:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

  Windows Vista-
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  (948481) how to troubleshoot sound
  problems that you experience after having
  install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• HP Pavilion 2320tx g6: IDT HD Audio CODEC for HP Pavilion 2320tx g6

  Hello! I used the IDT Audio CODEC for Windows 7/8 for a while, but a few days ago I accidentally uninstalled the Audio driver. I searched the internet for the suitable driver for my laptop, but the audio driver listed here package seems to be broken. After downloading the package and extraction, she seems to contain the Realtek Ethernet Controller Driver (must be contained in a sp61713) instead of the Driver Audio IDT. I can't find the original content of sp61716and so impossible to install the correct driver IDT. Anyway, the size of the file of the current binary file listed is 5.77 MB, too small for the IDT audio driver in my opinion.

  I looked almost everywhere and downloaded dozens of pilots under 'IDT HD Audio 6.10.6417.0 A', but none of the .exe, I tried it, works.

  I'll be happy if someone can link me the content of sp61716 (no, the ftp://15.193.112.22/ftp1/pub/softpaq/sp61501-62000/sp61716.exe package contains the Realtek Ethernet Controller Driver after extraction), or correct the original in the Support page link, so I can return my headphones to life.

  Thanks in advance.

  EDIT: I tried system restore already, but it did not work. He showed that the restore was successful, but the pilot has the same default Microsoft, which does not help my helmet. At this point, I guess reinstall the appropriate driver is the only option I can think.

  EDIT2: It is certainly not the problem of my helmet; they work very well on other devices. In addition, previously I had downloaded and installed the driver from the HP itself support page, and the old version of sp61716 was indeed the (good) driver to work.

  Hi there @Potla
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I appreciate that you try to reinstall the audio drivers. I'm happy to help you.

  A method, you can try is to recover the pilot of the original image. See the following for how to do this:

  Computers HP - using Recovery Manager to restore the software and drivers (Windows 7)

  Let me know if it works for you.

• IDT Audio stops working on Latitude E6230

  Hello, in our society we use much Latitudes E5430/E5530/E6430/E6530/E6440/E6230 and most of them running Windows 8/8.1 x 64 with no problems.

  One of our colleague with strted Latitude E6230 of problems with its IDT recently. However, there is no audio output to speakers or headphones. Even in the docking station. Drivers are correctly installed, Windows don't you just play the sounds.

  The first solution was to uninstall the IDT sound card, reboot, reinstall, reboot and it worked. Now, this no longer works. I booted Linux Mint Xfce 16, sound works fine under linux, so it should not be hardware problem.

  BIOS is the last, so are pilots IDT directly from Dell. IDT is give any supported, so its place at Dell or MS.

  Anyone has stumbled across it? Im a little unable to solve this problem. Realtek USB sound card works fine.

  Reinstalling Windows is not an option, which would take much more time, everything else works fine. Motherboard has been replaced in the past due to problems with docking connector. I think that is not however make the motherboard.

  Here are a few screenshots, sorry, they are in our Czech tongue. Drivers are correctly installed several times, depending on the device Windows is running fine. Windows Media Player cannot read mp3 or anything like that with her because he walked into the problems with the audio device.

  Speaker configuration does not play the sound test, absically "couldn't play test sound.

  Thanks in advance for reading and tips!

  

  

  

  

  Jimco

  
  It doesn't seem to be a problem with the IDT driver, so probably something to do with Windows. But if you want, you can try the native audio driver for Windows. If the E6230 still has the same symptoms with the native driver then certainly not the fault of the IDT pilot.
  1. open Device Manager (type devmgmt.msc in the start search box and press ENTER).
  2. develop the 'audio controllers, video & game' and right click on "IDT High Definition Audio Codec".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart

  Good, it helped actually, because there were two audio controllers. Was IDT Audio Codec and second was generic 'audio device High Definition Audio' so I installed the Windows driver generic Audio Codec IDT Audio Codec. After the reboot, there are two features high-definition Audio and sound works! Jack detection works also greatly.

  Thank you wery much for this entry!

  

• Lost sound laptop-ATI and IDT files deleted, restored, but still no sound

  Hello

  By mistake I deleted files ATI high definition Audio Device and IDT Audio Codec.

  When I realized that these were system files I restored them and reloaded the drivers, but I have still no sound and YouTube videos crash after about 10 seconds.

  I checked the drivers in the Device Manager and for the IDT Codec, I get:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)  "

  Ideas everyone.

  Thank you

  Success!

  In 'Control Panel' came in "Troubleshooting" and then "hardware and sound" and then under "Sound" automatically reloaded the drivers and it works again.

  In "Setup/sound Panel" under 'Record and playback' IDT HD Audio CODEC drivers have reinstalled for speakers and headphones etc..

  Have all the sounds back

• IDT High Definition Audio CODEC (NO SOUND PROBLEM)

  My PC Info is:

  Manufacturing: Hewlett-Packard

  Model: HP EliteBook 8460p

  Rating: 5.3 Windows Experience Index

  Processor: Intel (r) CPU of Core i5 - 2520M 2.50 GHz 2.50 GHz

  Installation of memory (RAM): 4.00 GB (2.98 GB usable)

  System type: 32-bit operating system

  Pen and touch: no pen or press enter is available for this view

  Windows 7 Professional

  Product ID: 00371-OEM-8992671-00008

  Problem: I was watching a movie one night before I cut and I forgot to turn on my laptop, today I discovered that the sound does not work, then I tried to restart and still without hope, I tried to disable and don't allow the IDT High Definition Audio CODEC and still no hope, windows says that this device is working properly , but oviously it's not I really need help, I don't know what it is advanced technology, so im helpless.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59291.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Only start the laptop and let Windows load completely - it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Loss of sound after IDT High Definition Audio Codec update.

  HP Support Assistant says that a new driver IDT HI Def Codec is available, so I downloaded and installed 6.10.6417.0, after which I have no audio output. I don't know which driver version was installed before the upgrade, but I have since downloaded and installed 6.10.6330.0 and rebooted but still have no sound. The device is activated and if Windows says that it works correctly (which isn't, but then it is Windoz).

  I'm now totally at a loss as to how to proceed otherwise that a clean installation of Windows that, for obvious reasons, I'd rather not do.

  System details:

  HP Envy 14-2002ea Beats Edition runing Windows 7 Ultimate 64 bit SP1.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53281.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, stop the laptop.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• No sound. Assistant support said HP idt high definition audio codec ERROR 52

  Laptop HP Pavilion G7-1273NR

  Windows 7 64 bit

  Error of IDT High Definition Audio CODEC 52

  Windows says "No. Audio Output Device is Found.

  Everything worked fine last night.  This morning he has no sound.

  I guess I have an audio driver damaged (corrupted how? I don't know.)

  Just reply with a link to a replacement driver, & and/or advise.

  Thank you.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  If you have still no sound, open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• IDT High Definition Audio CODEC works only (no sound)

  So I have a HP Envy 17 t-j100 jump movement and it's been a bit dodgy so far (I got to send twice for repairs of equipment), but now it's ruin on audio.

  IDT high definition Audio CODEC

  At random, it has stopped working, I checked my cell phone yesterday and the sound does not work, it says that the driver may be corrupted or missing. When I checked the Device Manager, the driver came with the same message, so I uninstalled and reinstalled the same. Now, he says that it meets the requirements of min to download/install the driver completely. It worked when I put on the headphones, but now it does not work with anything.

  It would be a great great help if someone could give me any suggestions, I tried a few and nothing worked.

  Here are a few screenshots of gyazo messages it gives me:

  http://gyazo.com/f14c9eb496e993c684a0d037201ff1a5

  http://gyazo.com/5cd02af7db448a782f29c951a42ec5b0

  http://gyazo.com/890c6ff98a3db223a6d21da5edd18306

  http://gyazo.com/c5eaac74d49189c1483e4a7d5ac2b5e9

  To answer your question, Yes, I have Windows 8.1. I actually managed to get it fixed; I installed the driver of windows 7, updated (which does not immediately), and then restarted the computer and managed to make it work when you have completed the update. Thank you for taking the time to troubleshoot well!

• No sound. Problem of audio codec IDT high definition.

  Hello.
  my system is DIMENSION 9200/XPS 410
  I just installed windows xp sp3 and noticed that there is no sound. I went to the Device Manager and saw this:
  
  uninstalled the driver, rebooted the pc. start a "found new hardware wizard" popped up and I used automatic settings recommended for her to find the required driver. This was the case, the installation went, saw a back of screen with 'enabling' peripheral audio... written and then it crashed with an error:
  

  

  then I tried to do the same thing several times. is went to the dell website, downloaded the driver chipset for my system, installed, did a reboot, installed the audio drivers for my system in the dell Web site. Restart PC - nothing. Still no sound, the same problem with the audio codec IDT high definition remains.

  Any suggestions?

  Message edited by Frizeris on 09/20/2008 04:24
  
  

• IDT High Definition Audio CODEC - sound problem

  Hello. I am owner of a ultrabook - SpectreXT 13-2106TU HP. No sound on my laptop for a few days now. I tried troubleshooting - it says: IDT High Definition Audio CODEC has a driver problem. Then, someone help me please?

  Hello

  Take a look at this thread & follow what HP Expert DavidPK said in the other thread inside & see if it works for you:
  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/lost-sound/m-p/4231472

  Thank you

• No sound from computer troubleshooting returns the message: "device driver IDT high definition audio CODEC driver problem.

  I can't get any sound from the computer.  Worked, but quit when I tried to watch a UTube video several hours
  After leaving the computer.  While troubleshooting, AutoCorrect could not solve the problem of the message
  has received "device driver IDT high definition audio CODEC driver problem.   I have the Windows 7 operating system.

  Hello Sharon,

  When you say "AutoCorrect" do you mean this:

  http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 ?

  If not, or you are looking for a driver try, here's one from Sony. Note that you may need to run in compatibility mode (with the right button on the file (or its icon on the desktop), select Properties, select the compatibility of the top row): http://download.cnet.com/AR5-Drivers-zip/3000-2108_4-180025.html .

  Let me know if one of them fixes the problem for you.

  Kind regards

  BearPup