No update sites to search

I had to uninstall and reinstall Flash Builder due to several crash.  After I re-installed I wanted to make sure that Flex was to date, went to the help > software update.  Now, I get the prompt

"There no update sites to search - no updates found. You want to open the preferences of "available software Sites? »

See http://blogs.adobe.com/jasonsj/2010/03/installing_plug-ins.html. Assuming you are using 4 FB or 4.0.1 using http://download.eclipse.org/releases/galileo/. If you use the preview version of FB Burrito, use http://download.eclipse.org/releases/helios.

Jason San Jose

Software engineer, Flex Mobile

Tags: Flash Builder

Similar Questions

  • When you search for available updates on the update site, I receive the 0x800A0046 error.

    HELP 0X800A0046

    How to ask a question
    http://support.Microsoft.com/kb/555375 >

    It helps those answering questions if you provide:

    What is your full version of windows (32-bit or 64-bit) and service pack level. (Right-click on my computer and select properties: Windows version which is displayed on the general tab that results (for example, Windows XP Professional Service Pack 1;)) Windows Vista Edition SP2 family)?

    You use what browser (exact version).

    What application anti-virus or security suite is installed and your current subscription?

    A 3rd party firewall is used instead the native Windows Firewall?

    What other software products anti-malware are installed and running?

    What updates you trying to install? (Number of KB)

    Please do it in your next reply.

    Information you provide will help someone to provide you with a relevant solution

    What are the causes of error 0x800a0046

    0x800a0046.html http://www.updatexp.com/>

    -

    December 16, 2005 when looking for updates available on the update site, you receive the 0x800A0046 error.

    http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=20&LN=EN>

    - -- ---

    February 7, 2006 error message when you visit the Windows Update Web site or the Microsoft Update Web site:

    "0x800A0046".

    http://support.Microsoft.com/kb/910338/en-us>

    --

    July 2, 2010, you may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site

    http://support.Microsoft.com/?kbid=883821>

    In most situations where the automatic updates and the system restore does not work, the usual causes are installed antivirus\security suite or malware.

    run a CHKDSK followed by a defrag after anti-malware analysis good or two.

    I recommend to download and install MalwareBytes' anti-malware (MBAM) and SUPERAntiSpyware (SAS).

    Do a FULL scan with MalwareBytes' and SUPERAntiSpyware.

    <>>

    http://www.Malwarebytes.org/MBAM.php

    Reset

    <>>

    http://www.SUPERAntiSpyware.com/

    Reset

    UTC/GMT is 02:23 on Saturday, February 25, 2012

  • Access to the Windows Update site 0x8024402C error code failed?

    Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

    Resolution: 0x8024402C error Code

    Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.

      Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

    3. Click the Connections tab and click LAN settings, and then click Advanced.
    4. Remove all the entries in the Exceptions section, and then click OK.
    5. Close Internet Explorer.
    6. Click Start, run, type cmd, and then click OK.
    7. Type the following commands. Press ENTER after each command.
      • proxycfg d
      • net stop wuauserv
      • net start wuauserv
    8. Try again to install updates.

    Windows Vista and Windows Server 2008

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.

      Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

    3. On the Connections tab, click LAN settings, and then click Advanced.
    4. Remove all the entries in the Exceptions section, and then click OK.
    5. Close Internet Explorer.
    6. Click Start
      The collapse of this image enlarge this image

      , and then type cmd in the box start the search.

    7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
      The collapse of this image enlarge this image

      If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    8. Type the following commands. Press ENTER after each command.
      • netsh winhttp reset proxy
      • net stop wuauserv
      • net start wuauserv
    9. Try again to install updates.
     

    Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.

      Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

    3. On the Connections tab, click LAN settings.
    4. Click to select her automatically detect settings check box, and then click OK.
    5. Try to install updates again.

    Kind regards
    Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

  • Unable to get access to the Windows Update Site. IE says "Internet Explorer cannot display the webpage"

    I am not able to access the MS Update site and receive page cannot be displayed error when I browse them directly or search results. I am able to navigate without problems to other web sites. Any ideas? I see all kinds of references to this in all directions, but the solutions that have been suggested do not work for me. I use McAfee anti-virus following personal firewall installed - version 10.15. I tried to disable the firewall (some messages indicate that this is what keeps me to access the update site), but still cannot access the MS. Update site

    Any ideas?

    Ian Robertson

    Repost:

    Cleaning a compromised system
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Cannot access the Microsoft Update Site

    I get the following error message when you try to access the update site:

    Microsoft Update could not be installed on your computer

    Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.

    More troubleshooting options

    • If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy.
    • If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer.

    Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in control Panel.

    [Error number: 0x800A01AE]

    I AM logged on as administrator (it's actually the only account on the system other than the guest account: I have renamed the main administrator account and use it as my account {I know this isn't the best practice, but I always did like it and it makes things easier being the administrator, especially since I changed the name for security reasons}).  I have a small home network wireless, but have no defined group policy (no server - just-to-peer).  The Windows Update Service is launched and running (but I stopped and restarted it just to be safe).

    I don't quite know what to do next.  I would like to be able to access this site for updates that cancelled or failed during the update process automatic (and who seem not to be re - that appear as options when I check the updates).

    Any help you can give would be greatly appreciated...

    BTW, I use a Dell Inspiron E1705 with 32-bit Windows Vista Business SP2.

    Thank you!
    Lorien - a - MCSE/MCSA/network + / A +.

    Hello

    You try to go actually on here Windows Updates site?

    http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

    This site does not work for Vista. You must use the Windows built-in to Vista updates or download them
    sites I posted for you last time.

    Absolutely do not use the default Administrator account. Just make a new Admin account to
    use and leave the other to test and difficulty. In fact, make an Admin NOW account to use to test and fix
    According to the needs. If your sole administrator corrupts you will have a big headache.

    -------------------------------------

    Run the Windows updates to reset and

    Do the two of them:

    How to reset the Windows Update components? a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
    Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
    http://support.Microsoft.com/kb/947821

    ------------------------------------

    If you have issues with your updates, please describe what you see and all the error codes or the KB/QB
    problem updates.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Suddenly have messy with the Microsoft Updates site?

    I ALWAYS successfully used the update site that both Express automatically and personalized for items of hardware or software. Maybe I made a few changes to my Win XP Tablet settings or my settings of IE 8?

    So, if I do a custom rather than formal, the site detects some updates to install. It is the first time 6. I checked 5 & countered the Bing Office thing since I use Google Search.

    Downloaded all 5, he took to always install 1. After a long period of time (15 minutes?), I canceled with the Task Manager. The results were so only got 1 installed and does not have 4.

    So, I started on after support in Internet Explorer.

    Now, Custom found 4. Yet once, I checked all, but Bing. This time, he quickly crossed download since those were probably already in a certain place of temporary files on my tablet. Then, once more, it took to install always the 1st and I finally had to force my way with the Task Manager.

    Now, the site says:

    * Summary of the installation

    Success: 0

    Failed: 4

    Remaining: 0

    The following updates were not installed:

    Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2600217)

    Root certificates update for Windows XP [may 2013] (KB931125)

    Office of Bing v1.3

    Update definition for Microsoft Security Essentials - KB2310138 (definition of 1.153.994.0)

    Thus,.

    #1 how to install these updates?

    #2 what is going wrong here which caused all this too happen?

    I ALWAYS successfully used the update site that both Express automatically and personalized for the pieces of software or material [without encountering any problems]...

    Your history of validation [and you the know I am familiar with your history to post here] suggests that this is not always the case, Jeff; for example, http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/cannot-update-new-windows-xp-rtm/23923237-5708-451f-8c38-4fdd206bc359 (October 29, 2012)

    That being said...

    Desktop KB2600217 & Bing v1.3 are both updates optionalnot security (Yes, even if they are offered as Important updates). Be sure to hide them & move on with your life.

    As long as your current definitions of MSE (by the MSE Update tab) has no more than 72 hours old, don't hesitate to hide optional MSE definitions updates (KB2310138) also offered. [1]

    Now, another CUSTOM scanner, uncheck the box & hide ("do not show me these updates ') optional updates, I quoted above then see if you can install the updated root certificates (KB931125) as a standalone update; Follow all the instructions.

    Tip: with the exception of the updates for Office, do not install any other optional updates or any optional hardware updates .

    Reply to this post with a status report.

    =====================================================

    [1] see this FAQ updates of definitions of MSE-online http://answers.microsoft.com/thread/74e507b8-f6da-4eca-8ce7-d1aca7d3f1ba

  • I switch to internet explore when using search engines because when I use firefox I get these very irritating pop ups on the web site, I searched.

    How to stop the irritating pop ups on the web sites, I searched using Fire Fox? My simple solution is to switch to Internet Explorer, it does not occur when I use for example

    This looks like a problem possibly caused by malicious software on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

    Remove a toolbar that has supported your Firefox or the homepage search
    Fix Firefox problems caused by malicious software

  • How can I renew my web site? I update my site to go to confirm the changes... but firefox does not allow me to see my updated site - no button renew? !!!

    How can I renew my web site? I update my site to go to confirm the changes... but firefox does not allow me to see my updated site - no button renew? !!! Firefox becomes slow!

    Reload Web pages, and ignore the cache.

    • Hold SHIFT and click reload.
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Cmd + Shift + R' (MAC)

    See also:

  • HP Update site is not available!

    Hello! I'm new to the forum!

    I have seen problems reciving and connection to the HP drivers Update site. I am from Croatia, Zagreb and I checked with several of my friends and co-workers who have the problem of sam! When I select my laptop HP Probook 470 G2 in the product range I revice this error:

    Could not open page

    The service or the information requested is not available at this time.
    Please try again later.

    (Error: system-websrv_unavail)

    I use Windows 8.1 x 64 and the last Crome and IE 11. Somethimes the site allows me to go further but its plain text all just without images or animations.

    Chrome gets this error:

    ERR_CONNECTION_RESET

    And IE11:

    Windows received an HTTP error message: 403 (refused) of "h20180.www2.hp.com".

    Hi, it's fixed now, the page with the pilots is available. Have fun with your HP laptop

  • I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

    I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

    What is your operating system and Service Pack?

    What is your anti-malware?

  • Error code: 0x800A0046 while windows update sites access & installation of updates... ?

    Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

    "Resolution of the error code: 0x800A0046".

    To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

    1. Click Start and run, type Dcomcnfg, and then click OK.
    2. Expand Component Services and then expand computers.
    3. Do right click my computer and then click Properties.
    4. Click the COM Security tab
    5. Under access permissions, click on change by default.
    6. Check that the following accounts are listed:

      On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

      The collapse of this Expand table this table
      Account name Permission type Permission
      Gites, administrators or a user who belongs to the Administrators group Local access Allow
      System Local access Allow

      On clients based on Microsoft Windows 2000

      The collapse of this Expand table this table
      Account name Permission type Permission
      Directors Local access Allow
      System Local access Allow
    7. If either of these accounts is missing in the access permission box, follow these steps:
      1. Click Add, click Advanced and then click locations.
      2. In the location box, click the Local_Computer_Name and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK twice.
      5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
      6. Repeat step 7 for all accounts that you just added, and then click OK.
    Step 2: Check the DCOM default properties
    1. Click the default properties tab.
    2. Make sure that the following configuration:
      • The Enable Distributed COM on this computer check box is selected.
      • In the default authentication level box, the connection is selected.
      • In the default impersonation level box, the identification is selected.
    3. Make the necessary changes and then click OK.
    4. Restart the computer.

    Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

    1. Click Start, click settings, and then click Control Panel.
    2. Double-click Administrative Tools.
    3. Expand computer management, and then expand local users and groups.
    4. Click users.
    5. In the right pane, double-click the account that you used to log on the computer.
    6. Click on the Member tab of.
    7. Click guests, click on remove and then click OK.

    Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

    1. Click Start, run, type cmd, and then click OK.
    2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
      SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

      Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

    Windows 2000-based clients

    1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:

      http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
    2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
      C:\Program Files\Windows Resource Kits\Tools
    3. Click Start, run, type cmd, and then click OK.
    4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
    5. Type the following command and press ENTER:
      Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
    1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
    Step 5: Check the local security policy

    Notes

    • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
    • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
      810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
    1. Click Start and run, type gpedit.msc, and then click OK.
    2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
    3. Click user rights assignment.
    4. In the right pane, double-click on impersonate a client after authentication.
    5. Verify that the Service accounts and directors are included.
    6. If the Service account or the Administrators account is missing, follow these steps to add the account:
      1. Click on add a user or group, click Advanced, and then click locations.
      2. In the location box, click Local_Computer_Name, and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK three times.
    7. Restart the computer.

    Step 6: Enable the persistence of user data in Microsoft Internet Explorer

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Click the Security tab, and then click Internet.
    4. Click on custom level.
    5. In the settings dialog box, scroll down to the Miscellaneous section.
    6. Under the Userdata persistence, click Activate.
    7. Click OK two times.

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

  • Windows Update could not search for new updates error code 80092026

    Note that Windows fails to return information to update and ends, so no access to the update site is possible by this means.  What relief is available?

    From journal Windows Update:

    2010-05-03 01:05:20:325 1076 128 c putting featured update notifications.  fIncludeDismissed = true
    2010-05-03 01:05:20:325 1076 128 c no. feature updates available.
    2010-05-03 01:05:25:106 1076 1434 report REPORT EVENT: {56DA38C3-AB55-476E-8D3C-D4950D386816} 01:05:20:091 2010-05-03-0400 1 148 101 {00000000-0000-0000-0000-000000000000} 80092026 0 AutomaticUpdates failure software synchronization Client Windows Update not found with error 0 x 80092026.
    2010-05-03 01:05:25:294 1076 1434 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
    2010-05-03 01:05:25:294 1076 1434 WER sent report: 7.4.7600.226 00000000-0000-0000-0000-000000000000 0 x 80092026 Scan 101 unmanaged
    2010-05-03 01:05:25:294 1076 1434 CWERReporter finish event management report. (00000000)

    What information to post in the windows update forum.

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

    incorrect tag value 0 x 80092026 Crypt_E_Security_Settings ASN1 met

    the cryptographic operation failed due to a local security option setting.

    Windows 2000, windows xp & windows 2003 ONLY *.

    Start/run

    Type "gpedit.msc" ENTER

    Click + configuration of the computer

    Click + Windows settings

    Click + security settings

    Click on + Software Restriction policies

    Click + by trusted publishers

    To "allow the following users select trusted publishers", the default value is "users".

    If you do not have it at all, this does not apply.

    This is usually the activeX error or the 0x800b0004

    ==================================

    the log file contains "error 0 x 80092026: failure of the cryptographic operation due to a local security option setting ', error. This occurs due to local security settings, to solve the checking number of 'safer' registry key and delete it.

    Find the following key

    Start/run

    Typr "regedit" ENTER

    HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\

    SystemCertificates\TrustedPublisher

    Under "TrustedPublisher" look for "Safer" key.

    Delete the "Safer" key if it is there.

  • Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

    Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
    ~ Jenifer

    It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

    You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

    Let me know how it goes,

    Barbara

  • Win XP laptop: Update site offers ONLY SP3 update base - why

    HI -.
    I have an old Toshiba Techra M1 XP Pro SP2 machine running. When I try to update, the only proposed update is the update of the SP3 base.  Why the update site will not provide other updates?

    Let me answer your question with a few questions of my own:

    Automatic updates is enabled?

    Why SP3 has not been installed now? [Computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates will stop working, and the Windows Update Web site will not be available after July 10, 2010, until that SP3 is installed.]

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    HOW to get a computer running WinXP SP2 fully patched
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Why my computer Windows XP keep appearing as a MacIntosh or other OS on the Microsoft Update site?

    Lately, whenever I try to connect using IE8 to Microsoft update to check the updates for my Windows XP system, I get a message saying that since I was a MAC OS, I should go the MAC Update site.
    I tried already to not launch the no version of IE8 add-on found in system tools and got the same results.

    This article should explain the problem-

    Windows Update page says "thank you for your interest to get updates of our site."
    http://www.Winhelponline.com/articles/35/1/
    TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for