No video AMD pilot plant

Similar Questions

• Help please... Unit hardware video AMD radion ceased to operate the property.

  Using windows 7, 64 bit. Impossible to post videos, etc., to other social networks:)

  Hello Susieo,

  You need to see more details on what you can and can't do. Does your video at all? You can make videos but do not share? What happens when you try to do and / or share a video? Please post some specific error messages. If you could answer these questions, I am able to help you.

  In addition, your question says it's a hardware problem... this site deals with software problems. If its an AMD Radeon hardware issue, you might be better to post on this site: http://forums.amd.com/game/ . I know that the link says 'game', but it is the only forum user with AMD Radeon! The other option would be to post on the site of the manufacturer of your computer, for example, hp.com, Compaq.com, etc...

  Kind regards

  BearPup

• Can I install video driver AMD and Control Panel on HP ProBook 4540 s?

  Hello

  I want to install driver video AMD and control panel alongside Intel video driverand Control Panel.

  Here's my computer laptop Information System:

  Name of the Microsoft Windows 8.1 operating system company

  Version 6.3.9600 Build 9600

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  ROGUE system name

  System manufacturer Hewlett-Packard

  HP ProBook s 4540 model system

  System Type x 64-based PC

  SKU C1B74PA #UUF system

  Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors

  BIOS Version/Date Hewlett-Packard 68IRR worm. F.50, 04/08/2014

  SMBIOS Version 2.7

  Embedded Controller Version 88.33

  BIOS Legacy Mode

  Baseboard manufacturer Hewlett-Packard

  Model baseboard is not available

  Name of plinth base

  Role Mobile platform

  State of secure boot not supported

  PCR7 Configuration binding is not Possible

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  The local United States

  Hardware Abstraction Layer Version = "6.3.9600.17196".

  User name TuHiN\T u H i N

  Bangladesh time zone standard time

  Physical memory (RAM) installed 4.00 GB

  3.88 GB total physical memory

  Available physical memory 1.95 GB

  7.88 GB total virtual memory

  5.59 GB available virtual memory

  Page file space 4.00 GB

  Paging file C:\pagefile.sys

  Hyper-V - VM monitor Mode Extensions Yes

  Hyper-V - second level address translation Extensions Yes

  Hyper-V - virtualization enabled in Firmware No.

  Hyper-V - data execution Protection Yes

  Hello:

  From what I can find on the product number you posted, it only comes with the integrated graphics Intel HD 4000 which means that you can not install the AMD software because it won't do a thing.

  That only works for laptops with AMD/Intel switchable graphics.

  HP Probook s 4540 C1B74PA Core i5 - 3210M Ram 4 GB HDD 750 GB 15.6 inch

  * ProcesseurIntel Core i5 - 3210M (2.50 Ghz, 3 MB L3 Cache)
  * RAM 4 GB DDR3 BUSS 1333 Mhz
  * 750 GB HARD drive -5400 RPM (SATA)
  * Display 15.6 "LED
  * Graphics Graphics Intel HD 4000
  * Wireless 802.11 b/g/n
  * External ports3.0/VGA/HDMI/RJ-45/ Headphone Out/Lan10/100/1000/bluetooth usb...
  * Pin 6-cell
  * Camera 1.3Mpx
  * Weight 2.5 Kg
  * OPERATING SYSTEM PC BACK

• HP Pavilion DV6 video drivers problem

  Hello world

  I bought a HP Pavlion DV6-6C52EL, last year, with Windows 7 pre-installed. After two months I have upgraded to Windows 8 and now to Windows 8.1 (I did a new install of Windows 8 and an upgrade from 8 to 8.1).

  But I have some problems with the video drivers. In particular, each time I get an error message about 'Application of the load MMDriver. First of all, I must say that my VGA is an AMD Radeon 7470 M + the built-in Intel HD 3000 (my processor is an Intel Core i5).

  So I uninstalled the video drivers (the AMD and Intel VGA drivers) and reinstalled the new on the HP Support site, but they are for Windows 8 (not for the 8.1) and not updated. in fact, I always get the error message, and I see that the AMD Radeon 7470 does not work. Only the Intel HD 3000 jobs. In Device Manager, I get the error Code 43 on the Radeon. Suggestions? I've already updated the BIOS to the latest version, without success. Should I downgrade to Windows 8 or 7?

  HP, please update your drivers for Windows 8.1.

  Thanks in advance for your help.
  

  12/15 PATCH: Finally, I have completely solved the problem. Now, both the VGA and the brightness adjustment work perfectly.

  After numerous tests, the pilot plants and the facilities (and a lot of patience ), I would like to share my solution for users with my same problem.

  Before you begin, please check the HP support Site if Windows 8.1 drivers are now available.

  • If Yes, you will get your graphics card works only by installing the proper drivers.
  • If No, please go to read this post.

  ==========================================================================================

  -If you plan to make an own 8.1 Windows Installer, just download the Windows 8 drivers for Intel HD integrated graphics card and the dedicated graphics AMD Radeon on the HP's Support Site and install them. They must work immediately.

  -If you have updated your system to Windows 8 Windows 8.1, as in my case, you may have some graphic problems. I'll show you how to solve these problems step by step.

   

       1. update your BIOS to the latest version available. Download from the Official Site of HP Support.

        2 uninstall the driver of Intel's integrated graphics and the dedicated Control Panel AMD graphics card driver. Do not restart your PC.

        3 using the free tool Display Driver Uninstaller (search on Google for the latest version), clean the registry keys and system files to completely remove drivers AMD. Restart your PC now.

  4. download the HD Graphics of Intel and AMD Radeon drivers for Windows 8 on the HP Support Site, but only install drivers from Intel.

        5 enter the BIOS Setup and change the mode of "Switchable Graphics"on"fixed".

   

        6 now install previously downloaded AMD Radeon drivers and reboot your PC.

  When you restart Windows 8.1, you should get the fully functional Radeon; check in the Device Manager to see if it's ok. If this isn't the case, please follow my guide illustrated in the 'Update 12/08' above post and try with that.

  You have now (finally!) the Intel and AMD Radeon graphics working with the brightness setting.

  Thanks anyway for users who have tried to help me.

  * NOTE: Those not worked for me, for my setup (Intel Core processor i5 2450 M with Intel HD 3000 and AMD Radeon 7470 M) so use these guides at your own risk. I decline all responsibility in case of problems or malfunction of your system. *

• HP Pavilion 2238TX g6: AMD Radeon HD 7600 M windows 7 64 bit driver

  Hello

  I have a problem to install a driver for the graphics card, AMD Radeon HD 7600 M.

  • HP Pavilion g6-2238TX
  • AMD Radeon HD 7600M series
  • Windows 7 64 bit

  I tried the catalyst drivers:

  • AMD-Catalyst-Omega-14.12-with-dotnet45-Win7-64bit
  • AMD-Catalyst-15.4beta-64bit-Win7-apr9

  Dirver nothing helps.

  I also tried these drivers of HP too:

  • Graphics of AMD driver high definition (HD) 8.933.3.4000 [sp58894] .exe
  • AMD high definition (HD) Graphics Driver 8.933.3.4000 Rev [sp61715] .exe
  • Graphics of AMD driver high definition (HD) 8.941.1.0 [sp56458] .exe
  • Driver video AMD and Panel 8.951.6 - 120329 B - 137790C Rev [sp57199] .exe

  I get the error message:

  Windows has stopped this device because it has reported problems. (Code 43)
  

  Hardware ID:

  PCI\VEN_1002&DEV_6840&SUBSYS_183E103C&REV_00
  PCI\VEN_1002&DEV_6840&SUBSYS_183E103C
  PCI\VEN_1002&DEV_6840&CC_030000
  PCI\VEN_1002&DEV_6840&CC_0300
  

  I just can't get the Radeon 7600 M video peripheral works in windows 7.

  It works fine under Ubuntu.

  It helps someone work?

  Is it possible to get this to work in windows 7?

  Is there somewhere else I should ask [I thought because my laptop is HP may the right forum]?

  Any help on this would be greatly appreciated.

  Also I would like to know if I can provide more information.

  Thanks in advance.

  Thank you.

  Yes, I had to completely remove the drivers installed previously.

  Reset.

  Then install the appropriate driver.

  I had to use this link:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5348593#Z7_3054ICK0K8UDA0AQC11TA930O2

  as I could not the first pilots.

• How to make a Windows Media video file .wmv in FireFox? What is the name of extension or add-on required?

  I have Windows 7 and FireFox 24.0

  I'm doing a standard Microsoft Media Video file. MWV run. When I click on the video link to plant video, I get a message saying that I need a plugin to run the file.

  I already ran into Setup on the link below. This installer named wmpfirefoxplugin.exe does not install anything in my FireFox plugins list or the list of Extensions.

  https://support.Mozilla.org/en-us/KB/play-Windows-Media-files-in-Firefox?ESAB=a & As = AAQ

  Where else can I try make FireFox run a. File MWV?

  Hello, please try this: enter Subject: config in the bar firefox address (confirm the message information where it appears) & search for the preference named plugins.load_appdir_plugins. Double-click it and change its value to true (a restart of the browser may be needed later for the change to take effect).

  some information on the issue are explained in http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/

• Mac Mini 2011 - AMD Radeon GPU failure

  Hi all

  I meet my mini 2011 (AMD video card) the same problem as the MacBook and iMac to the same generation.
  Apple launched an extended warranty for Imac:

  iMac (27-inch): AMD Radeon 6970 M video card replacement - Apple Support program

  MacBook:

  http://www.MacRumors.com/2015/02/19/2011-MacBook-Pro-repair-program-Apple/

  But nothing for the mini which has exactly the same problem.
  There are other minis users who have had problems:

  https://discussions.Apple.com/thread/7436149?SearchText=2011%20AMD

  Mac mini mid-2011 show AMD radeon 6630 m

  And many others I'm sure.

  I know that it sells less mini but that does not excuse either.
  I just got back from GeniusBar which tells me that this has nothing to do. And present me a motherboard change quote the price of a new mini.

  I concede to Apple supports this remedy for MacBook and iMac to the same generation with a video AMD processor?

  I take advice and opinions.

  Thank you for your help.

  Yes, some other users have posted the same problem and Apple does not have a recall/repair of the Mini program.

  You can try cooking

  https://www.iFixit.com/answers/view/105623/no+power+Mac+mini+2011.+suspect+logic + Council + someone tried + oven + cooking

  Mac mini mid-2011 does not start

• HP pavilion n203tx 15: Amd driver has stopped working and has recovered

  Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

  my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

  Thanks in advance

  Hello

  Try this

  install the following in the same order

  Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

  Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

  BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

  Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

• Architecture for chemical plant DCS + SIS boards

  Hello

  I'm designing a control system for a small pilot plant.

  I have it set on the use of State diagrams to encode the actuator low level i/o (input sensor readings and instructions, output control signals). However, I am puzzled about how to architect the system as a whole in LabVIEW. I need to support sequences of quite complex locking, which allows the security system to do its thing without blocking unrelated parts of the plant.

  for example if high-high fires, open the valve B close valve c. condition D wait to fill out, then close the B valve and open valve C. In the meantime, valve X is planned to open for 5 seconds every 10 minutes under normal operations - it should continue its pattern, without taking into account the high-high alarm A. High-high alarm is valve however, X must be immediately opened until Z condition is met.

  Anyone with experience have any advice or resources to share?

  Thanks in advance!

  Consider placing the parts of the code that deal with non related (more correctly: independent) parts of your plant in parallel loops. These loops can run without interference from each other. Transmit messages between the loops as needed through queues.

  Watch the producer/consumer architecture and examples of Message Queuing as ideas to help you get started.  Probably none of these is entirely adapted to your needs in the basic shapes, but the concepts are useful.  The State machines for different parts of the plant can be implemented within these forms.

  A lot of planning before writing code is paid in terms of necessity reduced to go back and start over.

  Lynn

• ProBook 6470b has separate video?

  I see conflicting reports. All models of 6470b have the AMD Radeon and Intell GPU? I just bought a 6470 refurb HP division b. A very nice unit; No one can confirm the GPU. I do not see an AMD in Device Manager; support suggested to install the AMD driver, but still, it does not show in DM. There is nothing that I see in the related graphics of switching BIOS.

  I can update BIOS, but will not if my unit is not required (i.e. only has 4000 Intel).

  My camera is an i5 CPU (not HD +) NVS, if no aid.

  Thank you.

  Yes, that would be nice.

  Enter the serial # on a Dell PC will give you all kinds of info.

  However, you may be able to find your specific configuration by doing a google search of your product number, which is the other number found on the tile as well as S/N.

  It is fairly new you can find a link to HP for the exact specifications or another place that sold it.

  If your video card is do what you do, it's good.

  I think that video AMD would add a lot of heat to the laptop.

• PC shut down when the video in the browser if Adobe Flash is used...

  Hello.

  My PC can turn off randomly when using adobe flash video in the browser.

  Topic close:
  http://forums.Adobe.com/thread/1258555

  (a) the temperatures in the system are OK.

  (b) system has survived several stress tests. Some wore on the PSU, some on the CPU, another on memory and other graphics.

  (c) tested on:

  Opera 12 and 20

  Browsers have been either Flash game, you will be able to. When uninstalled Opera requested Adobe Plugin automatically on Youtube.

  Internet Explore 11

  If Adobe ActiveX absent, YouTube videos were played through HTML 5 without a problem. During the installation of ActiveX was not difficult, but since I have the graphics card AMD, IT requested to activate "AMD steady video plugin. Once activated, there are still some chances to turn the PC off.

  Catalyst settings:
  When constant video AMD is not installed or is disabled the chance for this problem is still there.

  If installed and enabled, the system has not crushed this.

  I tried the last Adobe Flash 12 and 11 previous are the cause. I tried older Catalyst (13.12), and behavior is repeated.

  Event log:
  Empty. literally, it seems that when someone comes out the plug.

  Behavior of GPU:
  Last usually observed is that GPU clocks to frequency full for a while, then "video frequency" 501 Mhz.

  
  Other behaviors:

  This behavior is more like to occur when the PC is "freshly started." The longest is running, more it took power.

  ----------------------------------------------------------------------------

  The symptoms are confusing to me. The question is probably at least partially HW related, but related only to Adobe Flash. No other HW accelerated video codec is initially similar behavior (at least so far).

  
  On the other hand, its clearly related to Adobe Flash 12 or 11 past and some parameters of catalyst.

  ----------------------------------------------------------------------------

  
  Can you recommend Adobe Flash version that uses any Amd video Steady?

  Thank you.

  Thanks for the reply.

  (a) system passed all stress test, graphic power supply, memory or CPU MENTIONED.

  (b) its extinction only when you use Adobe Flash player in the browser.

  -----------------------------

  I confirmed that only Adobe Flash in any browser I've tested will result in failure, but I again rethink the components that are included in all of the chain. It was happenning even on stock frequencies and voltages, but...

  (Data stream coming from NIC, is transferred to the RAM, then CPU picks up, send it to GPU to decompresson (HW accelerated), then back to CPU when browser starts to manage data, then back to GPU for display)

  ----------------------------

  (a) core CPU failure could cause a BSOD, because I have 5 other CPU to handle the event in this way.

  (b) failure GPU, NIC or the sound card will also BSOD - processors will remain active...

  (c) memory failure will also cause BSOD...

  It is only my PC, which can cause the Instant Power-Off symptoms. His Northbridge/L3 cache.

  --------------

  Even when the Stock settings were originally exactly same symptom, I focused on the manual settings of the Bios. Last night (rather early this morning) I found the Setup when the Flash has remained stable.

  Its not overheating, rather than overloading of the Northbridge/L3 cache. The amount of the transactions between all devices must be huge... So I had to customize the settings, CPU/NB in order to maintain stable Adobe Flash. (slightly increase tension CPU + 0, 02v on CPU 0, 05v on NB compared to the stock).

  At the moment I have to re - test these settings for a few hours with Flash and later with stability tests.

• urgent: YouTube videos crash Muse - part 2

  I apologize for starting a new thread on an existing topic, but I really think that its more urgent acknowledged.

  Videos YouTube will plant busy Muse on computer screen Lightbox. Its not enough load one or two videos in the light therapy device. It will take several videos before Muse crashes. Once Muse broke down, he will break more regularly until it is difficult to put a video in the lightbox. It seems like Muse cannot digest the embed code, because after it has crashed and re-launched it will attempt to complete the loading of the video, sometimes it can, sometimes, it can not and sometimes it falls right down again once the effort.

  Vimeo is not a problem. I can load 10 videos vimeo one after another and they all play perfectly.

  In the two tests I used new sites and fresh pages. I downloaded (tried) YT to 480 x 360 and 640 x 360 by checking only the privacy box and adding autoplay (& autoplay = 1). I downloaded Vimeo videos to their sizes by default and only checked autoplay. I care incorporates it by subject/insert HTML.

  I'm on WIN 8 and 7, i7s. With the help of Muse CC v7.2 Build 232, CL 779928. Duration of air: 4.0.0.1390. My default browser is Chrome. However, same problem with ie10.

  It's certainly specific YouTube, as I thought!

  It seems that on some machines, Muse crashes trying to create a poster a snippet of video from YouTube, due to incompatibility between a recent change in YouTube and Muse of AIR base engine Overview HTML WebKit.

  As a temporary workaround, I created a new YouTube widget. It's just like the old, except that it displays a picture of 'YouTube' standard when Muse rendering, then you will get a nice overview of the video, but also, it should not crash.

  If you encounter difficulties to embed a YouTube video, please try and see if it works for you.

  http://lancetest01.BusinessCatalyst.com/assets/YouTube---no-poster.mulib

• The program Monitor stops the video play list

  Hello

  I lose the composite image of video playback in the program monitor and the Source monitor after a few minutes. Audio is not yet.

  While the video plays, a random video color video screens near bar overall top 10 lines of pixels from the left edge to the right edge, then the video freezes on video, but you can still listen to. After awhile, an error message appears and the first to be forced closed. "NVIDIA OpenGL driver detected a problem with the display driver and can not continue." Error code: 3'

  It happens on all projects ranging from different resolutions and sizs from 30 seconds to 40 minutes. I suspect it has something to do with this error of the video and pilots communicate do not, but something causes of creation to arrive after the clip, played some time to display. I tried a few online solutions, others have had success with, but it doesn't have a lot of solutions fully documented for Windows users.

  This put all my projects on hold. Any ideas on how to solve this problem?

  Other clues:

  able to see reading through the other display modes such as waveform, vectorscope or rc

  be able to see the video images to change if manually move the playhead to blue

  Windows Media Player plays video files very well

  Closing the first to reopen the first time very well for a few minutes

  -----

  APPLICATION SETTINGS-

  Adobe Premiere Pro CS 5.5 (5.5.2)

  "Scratch disks": using separate SATA HDD

  Player settings: default player - adobe reader

  playback settings-

  The TV format conversion: software

  play and pause resolution: 1/2

  Displays the first field

  Project example settings-

  sequence parameters: pixel square AVCHD 1080i, 1920 x 1080 16:9 30 fps offset

  Video: I-Frame only MPEG

  Codec: MPEG I-Frame

  Frame rate: 29.97

  DETAILS OF THE SYSTEM-

  OS: Windows 7 Pro 64-bit

  RAM: 12.0 GB

  Memory RAM used (Task Manager): 3.8 GB/12

  Desktop theme: classic Windows (disabled aero)

  Intel Core i7 920 2.67GHz

  NVidia Quadro FX 3800, 1 GB GDDR3, pilot: 9.18.13.697

  3D disabled, allow material dealing with disabled, software to manage color settings, 60 Hz

  Screen: Asus VG278 native 1920 x 1080, using 60 Hz

  Display driver: generic PnP monitor (there is no real drivers for this monitor from the MFG)

  Card motherboard BIOS: no integrated graphics chip

  UPDATE:

  A day later, Nvidia released a new driver updated 03/05/2013.

  I now get a success rate of 100% of the program monitor reading, even on projects that had a few preliminary questions.

  Clean the pilot installation option / default settings

  Version of the driver (from NVidia Control Panel): 320,00 (03/05/2013)

  Version of the driver (from maps Windows display properties): 9.18.13.2000 4/18/2013

  That will do it!

• ProBook page drivers 4540 s

  I just bought 4540 s ProBook (I7-3632QM)

  Product number: H5L54ES #ABV

  I installed windows 7 ultimate, but most of the drivers are not installed

  I can't find the appropriate page dirvers

  1 can someone please give me the link to the page drivers appropriate on the HP support

  2 - NIC is fixed on this model

  Thanks in advance

  OK, so the two controllers VGA (HD Graphics from Intel or AMD Radeon HD 7650 M) have been installed using the pilot video AMD and Panel, correct?

  HP 3D DriveGuard 5pilots should solve your unknown device "ACPI/HPQ6000.

  Your 'Bluetooth controller' driver has also been installed?

  Ignore the HP support assistant because several times it cause more trouble than it heals.

  Thanks for posting a screenshot of the final Device Manager screen and "Hardware ID" for any remaining missing or unknown devices.

  Please send BRAVO

• Pavilion dv7-6130ew, windows update broke my grafics

  After you install the update 8.1 Windows for x 64 systems (KB2919355) , there was an error after startup saying that MMdriver load application stopped working or something.

  This causes him my Firefox browser after start up and my video games also plant a few errors of d3d.

  I can't find all the windows drivers AMD 8.1 updates to my product page, the site lists HP Pavilion dv7-6130ew laptop, but then proceeds to let me know we were unable to verify your product

  
  Should what drivers I install?

  Hi KnoStro,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion dv7-6130ew Notebook and not being able to find the graphics drivers for Windows 8.1. Click on the Windows button and type Device Manager. You must click with the right button in Device Manager and update drivers for graphics that are listed.

  I hope this helps.

  Thank you.