ProBook 6470b has separate video?

Similar Questions

• HP probook 6470b - no display

  I'm looking for confirmation on the following problem:

  I have a HP probook 6470b that suddenly, the screen works on.   The backlight turns on, but no picture does not, not the start of Post for the HP logo or windows from the screens.  I suspect a bad LCD so I replaced it and I unfortunately have the same results with this screen (which I know to be a display of work).  The computer boots in fact facing upwards, and if I connect a monitor the output VGA port I work display.  Also, if I mount the unit on the docking station I get display on the connected monitors.

  If at this point, my suspicion is that the port that the LCD connects to the motherboard is damaged/bad, or the motherboard itself has somehow missed or malfunctioned.  In this case, I'll have to replace the entire motherbaord, I suspect.

  I tried the flush power / hard reset that I've seen suggested in all directions for almost every problem and this has no effect.  I also tried the recovery/reset Reset BIOS and had no change in symptoms.

  Does anyone have any thoughts or suggestions before I look at the replacement of the motherboard?

  Hello

  Very good diagnosis already done by you.

  1. you have connected an external monitor to the unit via the VGA and images are very well about this, which means that the rest of the functions are working properly.

  2. you have already replaced the display board, and the question is always the same. Thus, it is not a problem with the Panel.

  If the graphics drivers are all updated and works very well, we have the display cable (which is a separate part) that connects the display to the ZIF connector Panel (insertion force zero) or the ZIF connector on the motherboard itself.

  I work for HP.

• 3 displays with my HP ProBook 6470b 230W Advanced Docking Station

  Hi all

  I recently got a new HP ZR2440w monitor that I would like to joing my whole upward.

  Here is my current set up:

  HP ProBook 6470b 230W Advanced Docking Station + an HP L1950 monitor.

  My office is extended from the laptop to the Monitor HP L1950, giving double me poster.

  I would like to extend my desktop to the new monitor HP ZR2440w giving me 3 displays (laptop display + HP L1950 monitor HP ZR2440w monitor)

  For example, my question is: when I extend laptop to ZR2440w so that already granted to L1950 the ZR2440w does not connect.

  Note: I the ZR2440w connected to the docking via Display Port and speak it L1950 via DVI.

  I also tried both monitors on DVI.

  I tried the software graphics intel installed on my laptop but when the laptop lid is opened it will only connect to one of the external monitors.

  What I read I can only support 2 screens at the same time, but I feel like it rather kill to have so many display on the docking station ports and cannot use a while the laptop lid is open.

  Any help is greatly appericated.

  Thank you

  Steve.

  Yes, this was a limitation for awhile. The video controller in the laptop is the pull-out to the dock and it is capable of only configuration "dual head" If you get the screen of the laptop and the screen more.

• I have separate video memory or a separate in my laptop video card?

  I have the pavilion dv7-6135dx.

  When I look to the top of my model number on the HP site, it says: ATI Mobility Radeon HD 6490 m

  When I go in my display settings, it says: Mobile Intel HD graphics 3000

  5093 MB total available graphics memory

  Dedicated to 1280 MB of video memory

  System video memory 0 MB

  3813 MB shared system memory

  What does all this mean?

  Can I have a separate video card or is it separate mounted to the motherboard video card?

  Best Buy said I could go 6 MB video memory to 8 or 12 MB I think. How can I know for sure.

  HP says nothing about the site on max video memory.

  Thank you

  Hello

  That just means your machine has TWO video 'maps' one is called Intel equipped with a video card and another called dedicated video card.

  Please read more about this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02731962&JumpID=reg_R1002_USEN

  Kind regards.

• Can I need separate videos to allow a user to 'Play All' (from the beginning to the end) and select certain sequences (ceremony, reception which the sequence chosen start and end at the rest of the video and not the sequence, speech etc.)?

  Hi - I'm obviously new to yet, but that's what I want to do.

  In a wedding video, I want them to be able to:

  1 play the movie from start to finish.

  2. Select a sequence (say speech) who plays since the beginning of the sequence to the END of the whole video.

  So do I need 1 video for the room, as well as 4 sequences - reception, cake, speech, dance?

  Colin

  You can use separate videos or a single video. The only video is easier for your desired navigation. You will find more people asking how to get the 'chapter' or the video scene at the rear to a menu when it ends and also have a game all. So ignore the advice on those.

  Simple video:

  Your single video goes on a timeline. 'Play all' is a button in the timeline, and the timeline has an end action of "last menu."

  Menu of chapter has 4 buttons (plus a fifth to return to the main menu), going to each respective chapter marker. There is no action to end on chapter markers, so when a new chapter is reached, he continues to play as the piece all the.

  Several videos:

  Each video goes on his own script. The end of video action a timeline is timeline two video etc. Play all is a button that goes to the timeline one. The chapter menu also has a button go to chapter one, and it works identical to the play all. Each of the chapter buttons go to their respective chapter deadlines.

  Still may have some problems with a certain time lag, but I do not think that they affect either of these workflows. Don't rely on the preview again; burn a test disc and play on a DVD player.

• start page for Firefox has undesirable video - how can I remove it?

  I installed Firefox yesterday. Everything is OK except the splash screen (home page) has a video on it. I played and I now want to remove it.

  If you do not want to see excerpts on the topic: home page or if there are problems with a snippet, you can set the browser.aboutHomeSnippets.updateUrl pref an empty string on the topic: config page.
  Delete the storage\persistent\moz-safe-about + House in the closed Firefox with Firefox profile folder (Firefox '3-bar' menu button > exit/Quit) remove code snippets stored in IndexedDB and make Firefox to use a default extract value.
  You can reset the pref browser.aboutHomeSnippets.updateUrl through the context menu on the default to reactivate the code snippets and make Firefox recreate the moz-trunk-fort-about + folder.
  Close and restart Firefox after changing the value of the preference of browser.aboutHomeSnippets.updateUrl.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• ProBook 6470b: mSATA SSD in a Probook 6470 b

  Hey

  I just want to tell you is possble to install an mSATA SSD in a HP Probook 6470b. While I don't see a present pci slot which can be adapted for an mSATA ssd, I don't want to face any questions that he might not be guilty or bios regonise the reader, etc.. My idea is to have the mSATA SDS which will serve as my boot device and have a 1 TB or 2 TB 2.5' HDD for data. Right now I use a samsung 840 EVO SSD 2.5' as my boot drive.

  Kind regards

  Nick

  Here's what it says in the Manual:

  Flash module 24 GB of cache mSATA Intel (Intel Smart Response Technology (SRT), not available on computer models equipped with WWAN or SSD)

  So yes, you can insert a disc of the WSSD in the pci-e slot you see. However, it is designed only to be used as cache acceleration and not as a main boot drive. This means that it will be bootable, but only as long as a regular SATA HDD or SSD is not present. It is the oldest mSATA material used with the Intel Core processors 3rd generation on business models and processors of gen 4th on consumption patterns. Later models can use the slot of the WSSD to boot, but not yours without significant configuration involving a bootloader installed on the SATA drive.

  Your repair manuals

  It is complex so feel free to post back with further questions

• Windows 8 RT has good video reccording software avalible?

  Well the title already has my question made windows 8 RT has good video reccording software avalible? for editing and recording videos on the Surface.

  You can record video using the built-in camera application or some other applications.  But the video recording of a Tablet is a little difficult without getting fragile.

• Any Ae model has no video in first

  I am currently faced with a new problem.

  When you import a model of EI in the Pr, it has no video.

  The comp is ok, when I right click on it and choose "Edit Original", it shows the video perfectly.

  I'm on a PC.

  I tried to restart two programs,

  by dragging the model of EI to Pr,

  import of the model within the Pr,

  using a different model.

  Everything worked fine a few weeks ago when I finally used the dynamic link feature. Any ideas?

  Thank you

  Problem solved, had to highlight the track "V1".

• HP probook 6470b pci simple communication driver

  Have a computer laptop hp probook 6470b. Had to reinstall the operating system and can not find the driver of communication simple pci PCI VEN_8086 & Dev_1E3A & subsys_179C103C & Rev_04

  Also unknown device

  USB\Vid_138A & PID_003D & Rev_0104

  USB\Vid_138A & PID_003D

  Hope someone can point to where I can download the drivers

  Install the Intel MEI driver software for the PCI VEN_8086 & DEV_1E3A & SUBSYS_072D1025 & REV_04

  Install the software Chipset driver

  Install the software HP3DDriveGuard

  The drivers are here

  Kind regards

  ERICO

• ProBook 6470b | SSD is not on the F9 boot menu (SanDisk Ext. 128 GB SDSSDX - 120G - G25)

  Hi, I plan to upgrade my 6470bs HDD Probook by adding an SSD: SanDisk Extreme SSD 128 GB with drive caddy.
  I inserted DPS as well, seen and main factors installed on Win7 64-bit, but immediately after I restarted my laptop and has hold down the button ESC > F9 and then I do not see my SSD as a BOOT option.

  Any idea to solve this problem?
  Should what drivers, patches or programs I install to get to zero for the installation of OS Win7 64 bit on my new SSD?

  Thnx.

  Change the image 3

  UEFI boot

  UEFI boot order

  update of the bay at first boot specifications

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)

• is there a way to create a single video file of two separate video and have their output to two separate projectors?

  I started using the first less than two months ago and my tech video background is rather limited . I'm doing an art project where I am projecting two different projections on a large wall that are designed to be in harmony and interact with each other.   I intend to use two laptops, one for each projector.  This is a possible problem.  The docents Gallery in this gallery of the University will have to turn everything on every morning, having to click on both computers at the same time to synchronize the images play together perfectly.  That simple I'd like to think, I know year 19 former students who are the docents sometimes fail to grasp what is obvious.  Is there a way to take two project files and create a single file that could play for two projectors from a laptop outside?  As a split screen monitors?  That way they click on a button. I don't know if it's possible, it can't be.  I just thought to deal with this problem as possible before that happens.   

  Has ny advice would be greatly appreciated.

  You can create a sequence on the front which is double width. For example, 1280 x 720 (720 p) becomes 2560 x 720, which is TWO 720 p side by side videos in a clip. For reading, you may be able to implement the graphics card settings to do it for you, or - get a Matrox DualHead2Go box. You must set the graphics card in your computer to the display size double width, such as 2560 x 720, and the single output of the computer goes in the DH2G unit, which separates the entry into two outputs independent of 1280 x 720.

  There are many models available, depending on whether you are working analog or digital graphics card. There is a ton of information available, including tools for configuration and testers to run on your system. It is important to seek and choose carefully, to make sure that the connections are compatible and that map display of your computer (and Matrox unit) will support both the specific resolution you are looking for.

  Matrox DualHead2Go Digital SE | Multiple monitors for laptop computers

  Thank you

  Jeff Pulera

  Safe Harbor computers

  www.sharbor.com

• mSata update for HP ProBook 6470b

  Hello, I've read here on similar problems, but did not get the clear answer :-(

  Question:

  I have a HP ProBook 6470 b,

  I noticed that there is a slot mSATA and the module cache flash 24 GB of support if WWAN card is not installed (as in this case)

  can I do the following:

  -install a 60 GB mSATA SMS200S3 / 60G

  -change the boot sequence in the bios to boot from mSata first, second HDD

  -install Windows 8 on my mSATA,

  Basically, I want to use windows 8 on my mSATA and leave the HARD drive as a data disc.

  I'm very apprechiate your oppinions!

  or other improvements of the boost to the HARD drive.

  Thank you in advance,

  Here is the Service Manual:

  Manual

  Availability of WSSD player 24 concert for your specific model is not mentioned, but there is no instructions as to where he is or how to access it.

  The WWAN slot will not accept a WSSD. It's a unique calling used only for WWAN. If you've seen specific information that says otherwise let us know but I remember answering a question, there is no if long of someone who has this exact model, wondering why its WSSD disc inserted in this slot didn't work. In other models similar where her WSSD is available but not shown in the manual, the slot is on the motherboard, you must remove the card to access.

  If you install a WSSD you can not use as boot drive without using a bootloader installed on the main drive. The BIOS are written in such a way that the SATA drive will replace an mSATA and the latter cannot be started if a SATA drive is present. Your best bet to speed it up is to get an old regular 2.5-inch SATA SSD, or open it completely and add a 24 concert disk cache and then use Intel quick to start up as an accelerator. This is a major improvement in performance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Probook 6470b BIOS password

  Hi all

  I want to access Bios from Probook 6470 b but do not have password. Could you please tell how to remove it or what is the default password?

  Thank you

  LAAM.

  There is no main password for ProBooks or EliteBook generators.

  You will need to contact HP.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html?JumpID=reg_r1002_usen_c-001_title_r0003

  Or look at this link.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility

  Or replace the BIOS chip.

  http://www.eBay.com/ITM/unlock-HP-ProBook-BIOS-password-chip-4340s-4440s-4540s-4740s-4710s-6470b-6570b-/171016291233?PT=LH_DefaultDomain_0&hash=item27d15d83a1#ht_2500wt_1312

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.