No sound when connected to headphones or external speakers

Similar Questions

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• No sound when connecting my new XPS 9530 to my TV with a HDMI cable

  I got my new laptop XPS 9530 for 3 weeks now and can't get any sound when connecting it to my TV with an HDMI cable.  I struggled to find a solution that works so far.  I tried so many solutions for example suggested, I went to SOUND / playback devices and the only option is to Audio speakers (Realtek High Definition) but not option for HDMI. I have re-installed video and audio drivers but still no success.

  The worst is that I sent to Dell Support FOUR times without reply after that initial automated response.

  Hello, I had the same problem on my XPS 9530 but it corectly established after a few moments, fundamentally sound has been activated later than the video.
  In any case, you can still use Windows troubleshooting utility, or what I would sugest is to test it on another TV and give him a few minutes and then also try another HDMI cable, your current version is perhaps too old or something.
  BTW do you have updated the video drivers intel and nvidia? If not, please do so.

  One last thing, if you get no response from email support you can always make a phone call if your problem is urgent.  ;)

• Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page.

  Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page. It started to happen after upgrading to mac osx elcapitan.

  have no idea how to solve this? now I write all my css stylesheet in the head section of my html page.

  Thanks for help

  Best regards

  the problem has been resolved.

  I forgot to write rel = "stylesheet", that was the problem.

• HP Pavilion DV7: No sound on the computer or the external speakers

  Hello

  My computer or external speakers have audio.  While trying to determine what could be the problem, I think

  I deleted by mistake the audio driver.   When I was troubleshooting in Control Panel under the sound

  category I selected the button disable without realizing it would actually delete the driver software.

  Is there a way to retrieve that or I will have to buy new drivers for my computer?  I s there a way of

  get a free download on the sound card drivers or is there any reasonable out there that you know?  I have not a

  warranty on my computer.

  Thank you for any advice or help.

  Hello

  Yes, that's correct.

  Kind regards

  DP - K

• No sound playback after removal of the external speakers.

  My PC (HP Pavalion with media Center TV model m8090n) was good with the sound with external speakers (Creative 3.1). I had now removed these external speakers and intend to use the PC without these elements, but on the internal/built-in speakers. But surprisingly, I find no sound playback in the PC after removing these external speakers. Please suggest some remedies/cause.

  Hi H K Tyagi,.

  Step 1: Run the fixit available in the link below and check if this solves the problem

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  You can follow the other steps mentioned in the link

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• No sound from headphones and external speakers when connected to the laptop HP Pavilion DV6

  Original title: my Hp Pavilion Dv6 Laptop speakers do not work. Also, when I plug in my headphones, it reconiges them, but no sound.

  Basically my laptop speakers or my headphones work. I tried unistalling them and reinstall to no avial. I also tried a few other methods but still no avial. Please help me!

  Hello Arnott190,

  In addition to the response of the appellant, if please relay the exact brand and model of your PC. Please also relay the State after execution of the resolution of the problems of playing the sounds in step 2 in the link below which helps you diagnose and fix common problems playing the sound.  If the problem persists, you can also run the hardware and devices Troubleshooter who diagnose and fix common problems with hardware and peripherals and then check the issue.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  You can also view the link below, provided by the manufacturer of the device:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00833257&LC=en&DLC=en&cc=us&product=3979400&lang=en#n466

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound when connect you external speakers

  original title: external speaker problem

  I have a small speaker set external USB connected to my laptop.  Recently, I disconnected them and change the sound settings to use the laptops speakers.  When I plugged the speakers external back in, I have no sound.  There is no installation CD and my drivers seem to be OK, although I'm not sure.  I search for drivers and everywhere that I go I thought that my audio drivers are up to date.  Help!

  Hi, George,

  I am happy to know that the problem is resolved, the problem related to the system restore, I ask allows you to create a new thread to help you better. You can create a new topic by clicking on the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp

• No sound when connecting the Macbook Pro to ext speakers.

  I have a MacBook Pro (retina, 15 ", mid-2014) running OSx 10.11.6 (El Capitan).

  It has a combined audio port 1/8 "for two speakers and a microphone. The internal speakers work very well and the port works very well with a helmet. What does not work must connect external powered speakers like the computer speakers or the port on a radio. It worked perfectly with all other computers that I have ever owned, and judging from the page linked below it should work for this computer, too, so what's the problem?

  Connect your Mac to a Hi-Fi, iPod, iPad, musical instruments or loudspeakers - Apple Support

  I tried it with a 1/8 "cable this single sound of the door (no tape for micro), and (when it does work), I tried to first insert an adapter that split the audio and microphone, but it does not solve the problem.

  How to make this work?

  I found the problem. When I plugged a cable into the headphone jack, the Mac automatically turned to the low volume - assuming I have connect headset. This is why I couldn't hear it. I open the sound applet in the system area and pushed back the volume of output to the top and voila - fixed.

• Pavilion 27xw & Envy 15 laptop: how to keep sound when connected to the laptop

  Have a laptop 15.6-inch Envy running on Windows 10 and rose just a monitor 27 xw Pavilion, they are connected by a HDMI cable included with monitor
  
  If there is sound broadcast when I connect the HDMI cable it continues to broadcast through the speakers on the laptop, but if it stops then it don't re - start not to broadcast while connected.  If I disconnect the monitor then the sounds spread through the laptop.

  How to work around this problem?

  Jimmy, welcome to the forum.

  You must connect the monitor to the laptop and go to control panel / sound.  You must make sure that the speakers to the monitor are set by default.  If you do not use the monitor all the time, you may need to do this every time you connect it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• No sound when connect you TV to HDMI on my Satellite port has

  When I connect my laptop to my TV I get the display to work but no sound.

  I read where a lot of people with all types of computers have this problem, and most of them just default playback to the SPDIF thing.

  But when I do it still does not work.

  Can someone help me.

  I had problem of thersame, then follwed the indtructions on the link below:

  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm

  This document is written for Qosmio laptop but the principle must be the same, if that doesn't work try FN + F5, you should had video and sound on the LCD screen and a white screen on the laptop.

  Hope the above helps.

• No Satellite A300-1MC no sound when connect you to the LCD

  When I connect by Satellite A300-1MC HDMI port for my Toshiba Regza 37 "AV LCD series 37AV555DB and play a movie the sound comes out the laptop and not from the TV...?

  I have to do something to the settings? I tried other HDMI port and have the same problem...! Please can someone help?

  Do I need an another audio connecting cable? I used a VLC Player on the laptop, if this can be the problem?

  Any suggestion is welcome.

  Thank you

  Hello

  I checked Toshiba basic knowledge about the Toshiba support page and found some interesting documents that can help you:
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm - This document is written for Qosmio laptop but the principle must be the same.
  Is under audio playback are peripheral digital (S/PDIF) or HDMI output?

• X 301 has no sound when connected to the port replicator

  Hello

  We have a x 301 with a port replicator 45 k model 2777-cto 1610.

  We first had the problem with the blue screen and not SA of lenovo or IBM might help. I found the solution here.

  No, I have a new problem. When the port replicator is connected, there is no sound on the computer? Once the port replicator is unplugged, the sound works well?

  Any ideas or advice will be appreciated.

  Eugene

  When you connect to the rep of the port, the audio should be routed to the audio port on the default port rep, not your system. There should be a setting via icon taskbar for rep port driver that returns the audio to make of her.

• Latitude E6440 display blink when connect you to an external monitor via hdmi to VGA Converter

  Hi Dell Community,

  Please help me diagnose what's wrong with my new laptop.

  My laptop is Dell Latitude E6440, but whenever I connect external monitor to my laptop HDMI via HDMI port to the converter VGA, the external monitor still flashes randomly every two seconds. This VGA HDMI converter / works fine when I used it on the other laptop.

  Currently I still have the chance to try my laptop HDMI port to connect directly to a HDMI monitor because I don't.

  Is it that someone has the same problem with me? Thanks for your help.

  Dell currently manufactures replacements of main card to resolve this problem. They will be available at the end of July. Please make sure you have a current subscription and contact support to be eligible for replacement.

• No sound when I plug headphones after that Windows 8 download

  When I play a sound on the speakers, I can hear it perfectly. However, when I plug in my headphones, I hear nothing. What should I do to fix this?

  I had the same problem, I resolved it by disabling the fast start feature in the control panel:

  1. go to Control Panel-> Power Options-> choose what the power buttons do

  2. uncheck the enable quick start

  3 proceed to a complete stop by calling the shutdown /s /t 0 in the console, or create a shortcut with this command and run

  4 turn on the computer, now the headset should work ok :)