No write access to vmfs volumes

Similar Questions

• SAN access to VMFS volume snapshot

  So here's the deal.  I have a Compellent SAN can I take replays (snapshots) of the volume.  I spun this VMFS volume and tried to attach it to an ESX Server.  The problem is that ESX server does not see anything on the volume even if it is indeed a VMFS volume.  My guess - there is something on the volume as a GUID or something that the VMFS volume snapshot matches the orginial and forces him not not to be recognized.

  Any thoughts on how to pull this off?  There are a couple of VMDK files on this shot I have to take out of it.

  Thank you

  Richard

  Hi Richard, you are right. The host is detect it as a snapshot so it won't be installed because it would have the same UUID as a volume already mounted (you will see a message to that effect in the vmkernel journal). To work around this problem, go to advanced-> LVM-> and the value of LVM. EnableResignature = 1 and LVM. DisallowSnapshotLun = 0. And then perform a new analysis. The LUN should get mounted as a data store named "snap - 0000001 - < datastore_name >" or something similar. Be sure to change the settings advanced to LVM. EnableResignature = 0 and LVM. DisallowSnapshotLun = 1 after seeing the snapshot data store appear just to be sure. Hope that helps!

  Please, help me by awarding points for a 'useful' or 'proper' response if you think it is useful!

  -Amit

• I want to save a file in photoshop to one but external backup, get pop ups saying write access is not granted or Volume misread me only folder to another volume?  Not understand.

  I want to save a file in photoshop on an external backup however, I keep getting pop ups read... not granted write access... .and read only the file volume to another volume.   Not understand.

  No one can tell you anything without the proper system or other technical details info. If there are questions of security and permissions, so anything that adobe can fix it for you. Start by reading this.

  Preparations for installation. Error postal codes of Mylenium

  Mylenium

• To access the servers non - VMFS volumes ESX (i)

  Suppose I have a FC LUN with a VMFS volume.  It is not accessed by a host ESX (i).  However, there are old VMDK on the logic unit number I want to recover.  If the LUN is delivered to a physical Linux server, and this physical server is zoned / correctly mapped to the FC LUNS, can I access the VMFS LUNS for the vmdk off of it?

  Thank you

  Yes.

  http://digfor.blogspot.com/2011/04/accessing-VMFS-partitions.html

• "Access to the volume, batch" on a daily basis

  Hi all

  In the hope of a few tips see where to look because we know so many questions.

  The environment is:

  ESX 5.5 (last version update of this week)

  HP ProLiant BL460c Gen8 blade

  Brocade FC switches

  VNX5400 storage

  Everything is current patch level (HP Feb SSP, latest drivers etc from the latest edition of VMWare/HP Cookbook)

  On a daily basis, we see the messages of the following:

  Lost access to the volume 52e00703 - 7702b 882 - d845 - a 0017, 4779402 (data store) because of connectivity issues. Recovery attempt is underway and results will be communicated shortly.

  05/07/2014-07:50:16

  Access to the volume 52e0072b-0adb69f0-f97b - a 0017, 4779402 (DataStore) connectivity issues.info successfully restored the suite

  Of the vmkernal.log, I see these messages:

  (2014 05-07 T 02: 44:14.860Z cpu0:33743) lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0: (0): 3271: FCP cmd x2a failed < 2/4 > sid x0d0505, did x0d0100, oxid xd4 Abort requested host Abort Req

  (2014 05-07 T 02: 44:14.860Z cpu0:32813) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x2a (0x412e80450900, 32805) dev 'naa.60060160fd503600ea66bd8acb82e311' the path 'vmhba0:C0:T2:L4' Failed: H:0 x 5 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL

  (2014 05-07 T 02: 44:14.860Z cpu0:32813) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.60060160fd503600ea66bd8acb82e311' of device NMP doubt; asked the State of the fast path update...

  (2014 05-07 T 02: 44:14.860Z cpu0:32813) ScsiDeviceIO: 2337: Cmd (0x412e80450900) 0x2a, CmdSN 0 x 299 worldwide 32805 to dev 'naa.60060160fd503600ea66bd8acb82e311' has no sense H:0 x 5 D:0 x P:0 x 0 possible 0-data: 0 x 0 0 x 0 0 x 0.

  (2014 05-07 T 02: 44:15.859Z cpu0:32881) lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0: (0): 3271: FCP cmd x2a failed < 2/4 > sid x0d0505, did x0d0100, oxid xe7 Abort requested host Abort Req

  (2014 05-07 T 02: 44:15.860Z cpu0:32813) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.60060160fd503600ea66bd8acb82e311' of device NMP doubt; asked the State of the fast path update...

  (2014 05-07 T 02: 44:15.860Z cpu0:32813) ScsiDeviceIO: 2337: Cmd (0x413682f6e580) 0x2a, CmdSN 0x29a worldwide 32805 to dev 'naa.60060160fd503600ea66bd8acb82e311' has no sense H:0 x 5 D:0 x P:0 x 0 possible 0-data: 0 x 0 0 x 0 0 x 0.

  (2014 05-07 T 02: 44:20.025Z cpu4:36428) World: 14296: VC opID 4CAEF736-0000009 D-0-fb maps to vmkernel opID 4f50e1ac

  (2014 05-07 T 02: 44:20.397Z cpu1:34426) capability3: 15408: Max (10) attempts exceeded for appellant Fil3_FileIO (status "IO has been abandoned by VMFS via virt-reset of the unit")

  (2014 05-07 T 02: 44:20.397Z cpu1:34426) BC: 2288: cannot write (couriers) object '. iormstats.SF': level core exceeded Maximum attempts

  (2014 05-07 T 02: 44:23.013Z cpu8:34236) HBX: 2692: waiting for [HB State offset abcdef02 4161536 gen 179 stampUS 1629072438 uuid 536997 d 8-04a1ea9d-6c9a - 0017 has 4779402 jrnl < 2656233 FB > drv 14.60] expired on flight 'uk1 - san01:Production data store 3'

  (2014 05-07 T 02: 44:29.645Z cpu4:33106) lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0: (0): 3271: FCP cmd xa3 failed < 3/4 > sid x0d0505, did x0d0000, oxid xeb Abort requested host Abort Req

  (2014 05-07 T 02: 44:29.645Z cpu20:33044) VMW_SATP_ALUA: satp_alua_issueCommandOnPath:651: path 'vmhba0:C0:T3:L4' (UP) command 0xa3 failed with status Timeout. H:0 x 5 D:0 x 0 P:0 x 0 Possible sense data: 0 x 5 20 x 0 0 x 0.

  (2014 05-07 T 02: 44:29.755Z cpu7:32857) HBX: 255: recovered for volume 52e0072b-0adb69f0-f97b - 0017 has 4779402 heart rate (uk1 - san01:Production 3 DataStore): Offset [Timeout] 4161536

  (2014 05-07 T 02: 44:29.755Z cpu7:32857) [HB State offset abcdef02 4161536 gen 179 stampUS 1632947371 uuid 536997 d 8-04a1ea9d-6c9a - 0017 has 4779402 jrnl < 2656233 FB > drv 14.60]

  (2014 05-07 T 02: 44:31.808Z cpu0:32807) lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0: (0): 3271: FCP cmd x2a failed < 2/4 > sid x0d0505, x0d0100, x 112 requested Abort Abort Req host oxid fact

  (2014 05-07 T 02: 44:31.808Z cpu0:32813) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.60060160fd503600ea66bd8acb82e311' of device NMP doubt; asked the State of the fast path update...

  (2014 05-07 T 02: 44:31.808Z cpu0:32813) ScsiDeviceIO: 2337: Cmd (0x412e8349b000) 0x2a, CmdSN 32805 to dev 'naa.60060160fd503600ea66bd8acb82e311' world 0x2ab has no sense H:0 x 5 D:0 x P:0 x 0 possible 0-data: 0 x 0 0 x 0 0 x 0.

  (2014 05-07 T 02: 44:32.407Z cpu1:34426) capability3: 15408: Max (10) attempts exceeded for appellant Fil3_FileIO (status "IO has been abandoned by VMFS via virt-reset of the unit")

  (2014 05-07 T 02: 44:32.407Z cpu1:34426) BC: 2288: cannot write (couriers) object '. iormstats.SF': level core exceeded Maximum attempts

  (2014 05-07 T 02: 44:33.541Z cpu16:32855) HBX: 255: recovered for volume 52e0072b-0adb69f0-f97b - 0017 has 4779402 heart rate (uk1 - san01:Production 3 DataStore): Offset [Timeout] 4161536

  (2014 05-07 T 02: 44:33.541Z cpu16:32855) [HB State offset abcdef02 4161536 gen 179 stampUS 1646119268 uuid 536997 d 8-04a1ea9d-6c9a - 0017 has 4779402 jrnl < 2656233 FB > drv 14.60]

  Any help much appreciated.

  Thank you

  The problem was a combination of factors.  Specifically, THIN LUNS on EMC VNX with Windows 2012 R2.  It's to do with how 2012R2 TRIM questions and cancel orders MAPPING in the table.  Basically, he blows on MS and has a knock on effect on all LUNS.

  The thing in our case is that we have a chassis package HP blades, for the most part running ESX, Windows R2 2012... and we essentially had a single physical machine 2012R2 out the table in its entirety...

  Defrag on 2012R2 exasperated this issue and was a way to find the number of logic (light IO) massive unit on the Page file for example, LUN during the defragmentation operation

• Discs of ESXi supports local (UFS) as a Volume/vmfs/volumes - didn't want not!

  Hi all

  Updated from 5.5U2 to 6.0

  A race of NAS VM using two disks using RDM (virtual) to get direct access to disks and smart State - created with the flag - z.

  After the upgrade to 6.0, ESXi now mounted (s?) drive - which are SoftRAID(4) 1 and have a file system UFS - to/vmfs/volumes/sink. This happened only after the second start, but now there is no way back for me.

  After the first reboot after upgrade, I was able to assign the disks to a virtual computer and restart it. On the next reboot, the problem above has occurred.

  Perhaps interesting to note that the volume is not mounted as a VMFS storage (at least it seems), but directly in the folder/vmfs volumes - and it is not a symbolic link like usual data warehouses.

  Tried Altready:

  / recreate the files with vmkfstools RDM

  Unmount the volume/vmfs/volumes/disassemble sink via esxcli file storage system (using all the u/n/p options, but ESXi said he "can not find the nas drive", which is not really sense)

  There is a thread on serverfault (not mine) with the same problem and similar details.

  VMware - 6.0 ESXi RDM mounting as local volume - Super user

  For the moment, I went down to 5.5u2 to access the virtual machine to work.

  Any help is appreciated.

  See you soon

  IAM

  It is possible to blacklist the ufs module with the following command to esxcli, and won't automount in volumes of ufs. the host reboot is required

  $ esxcli system module set m eggs e fake

• Access to VMFS existing via iSCSI storage

  Hi all

  In a test environment, I'm trying to access a VMFS existing via iSCSI data store.

  In the storage adapters, I clicked on Rescan. The SCSI target is displayed correctly. However, it is not in the storage, even after clicking on refresh.

  If I click on add storage and select disk/LUN, I can see the storage device, clicking on watch then the primary Partition as VMFS. Of course if I click Next again this reformatted it as a new data store, something I don't want to do.

  How can I get this existing VMFS volume is displayed in the storage?

  TYIA,

  Eric

  www.mymanagedbackup.com

  Have you tried to define enableresignature on 1 in the advanced settings (see attached) and then a new analysis.

• Labview that is running on a computer without write access to the installation directory?

  Hello

  A client of ours wondered if we can run our Labview executable and runtime on their computer without having no write access to the installation directory?

  It is quite easy to change so that our program writes its log files to another drive on the network, but what the runtime engine and updates Live trying to download programs OR?

  Grateful for any comments.

  As far as I know the terms of access rights for the updates are the same for the basic facilities.

  However, given that your program is running on a factory floor, I recommend disabling updates. I don't think you want to come down because a computer does not have an assembly line update.

• Error - "Launcher requires the write permission for World of Warcraft key to locate and launch the game successfully. Please turn on write access to the registry key with the help of an administrator account"

  Original title - edit registry of the world of Warcraft Launcher to write

  I downloaded the patch more recent game in my computer, I did a cleanup of the system and tried to log in again, but now the States window it "(Launcher requires permission in writing for World of Warcraft key to locate and launch the game successfully." Please allow write access to the registry key by using an administrator account)", how can I access the registry to resolve this problem? Help please

  Hello DaTurtle !

  I had exactly the same problem, I have not found the sollution here...

  But I found how to fix very easy !

  You do a right click on the WOW icon at the office-
  then browse to the location of the file -
  It will appear a lot of files-
  Click on the WoW program file instead of the pitcher-
  will start your wow game-
  Log in as normal-
  then he will come to the top to update...

  After the update your wow will work as usual!

  It worked on my computer, please respond!

  Hans_Craft

• Wow Launcher must write access to patch the game

  I try to run WOW and coming pitcher id the message "Launcher requires the permission of writ for the 'file' sucessfully patch the game directory.  Please allow write access to the directory by using the administrator account. "My account is Administrator and XP does not allow me to take the reading single tag out of the directory I did several things, including going into safe mode and in taking possession of the file.  Nothing works.  Is there and another way to get the file to be able to have write access to it at all! Nothing in this Ant is for Windows 7, I did not and do not care for the moment I am on XP.

  you have probably had this problem, because yesterday way patch day and everyone wants to see the new content.

  But check first that this.
  http://support.Microsoft.com/kb/308419

  If you are not joined to a domain and want to view the Security tab, "" discover the game, view, change, or remove special permissions for files and folders "" section in this article.
   
  should fix you up. MCP. MCDST. LVL 80

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Budget write access

  Hello

  I had a request that some users need a write access to budget not on actual expenses (they should read only access real who already have). Is there anyway to give that.

  Thanks in advance

  Hello. Yes, on each of the scenarios, there is a class of security called attribute. Assign different classes to the true and budget scenarios, with users with read access to the attributed to real class and all (Edit) access to the class assigned to budget.

  Eric

• Went to save my photo in PS and received the following message, "write access was not granted."

  Just bought an iMac and PS charged thereon.  Had a photo retouched I wanted to save and received this message, "... write access has been failed."  Called Apple, thinking it was a problem with the admin and discovered that all the parameter were correct on the side of Apple.  Any recommendations?

  papaK

  Salute to Colorado,

  It seems that the location where you want to save this document in Photoshop.

  Ensure that the save location is correct and has full permissions.

  You can try to save the document and check if it works.

  Kind regards

  Claes

• Write access is necessary GL_TRACK_DELTA_BALANCES?

  Hello, I'm under FDM/ERPi version 11.1.2.2 extracting data from Oracle R12.  Our Oracle R12 GL_TRACK_DELTA_BALANCES table has only read permissions.  The data seem to shoot and charge in FDM very well, but I wonder if this will create a long-term problem.  Can someone comment on why we should change to write permissions?  Thank you much for the help!

  Write access is required to allow EBS GL keep track of shipments of additional data that have been performed by ERPI. This allows only the differences between the last load for a period and a new charge for a period to be charged, rather than load the full set of data each time. If you plan to use incremental data loads then write access would be necessary.

• After integrated error of VMFS volumes

  Hello

  I have a 5.5 installed on Dell PowerEdge T110 2 ESXi which worked well. I decided to migrate to 6.0, but in case of a problem, I made a clone of my records. During the clone, I had a built-in long and the UPS has been unable to support, and now I cannot start the system and cannot be updated.

  If I try to boot ESXi 5.5 I got an error:

  Error loading misc_dri.v00

  If I start the update with the ISO burned, I got:

  The selected disk has a VMFS volume, which can not be scanned. It may be damaged or disconnected. Please select another disk or fix the problem.

  So I thought I'd start with 5.5 ESXi ISO to fix the system, but I got this error:

  The system has found a problem on your machine and cannot continue.

  Cannot load multiboot module: invalid parameter.

  
  I also tried to burn 2 times each ISO for you ensure that they are not broken but doesn't change anything.

  I don't see anything on the forum to help me, maybe I missed something?

  Also, I've migrated front of 5.1 to 5.5 and worked well. If I restore the 5.1 system, do I loss my VMs?

  Thanks for help

  I would try a new installation of a key to 16 GB + USB or SD card, first of all and then try to add the data store. Follow this KB: VMware KB: installing ESXi 5.x on a USB flash drive or SD flash card support looks like your least partner/OEM support (DELL) storage controller, and you need the drivers for it.

  If the data store is mounted with this temporary system first of all, I would like to make a backup of all your virtual machines, otherwise you can try to fix it.