To access the servers non - VMFS volumes ESX (i)
Suppose I have a FC LUN with a VMFS volume. It is not accessed by a host ESX (i). However, there are old VMDK on the logic unit number I want to recover. If the LUN is delivered to a physical Linux server, and this physical server is zoned / correctly mapped to the FC LUNS, can I access the VMFS LUNS for the vmdk off of it?
Thank you
Yes.
http://digfor.blogspot.com/2011/04/accessing-VMFS-partitions.html
Tags: VMware
Similar Questions
-
A procedure to follow to change the block of VMFS Volume size?
We use a VMFS volume with size of 1 MB blocks. As the virtual HD size must be greater than 256 GB, to change the size of the block to 2 MB.
We would like to confirm that the following is correct:
(1) to migrate all VM this VMFS volume
(2) delete this VMFS of ESX Cluster
Add 3) as storage again
4) format with the 2 MB block size
Is it Miss?
Thank you
There is not another possible procedure
But as already shown reflect the selection of block size.
---
MCSA, MCTS, VCP, VMware vExpert 2009
-
To access the servers in the DMZ
People:
I have a PIX 515E and I need to access a SQL Server that is inside the network... I don't know if I should activate NAT on the demilitarized zone to be able to 'see' the servers inside...
I tried a
> static (dmz, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0
to activate servers on the DMZ for access within the network without translation... but I can't create a static to a low security to a high security interface...
I wonder if anyone has the same configuration problem?
should I try to activate NAT on the DMZ also?
It's my current setup!
Thank you very much!
Luis
-------------------------------------------
PIX Version 6.1 (2)
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif dmz security10 ethernet2
access-list 100 permit tcp any host 200.200.200.37 eq smtp
access-list 100 permit tcp any host 200.200.200.37 eq pop3
access list 100 permit tcp any host 200.200.200.37 EQ field
access-list 100 permit udp any host 200.200.200.37 EQ field
access-list 100 permit tcp any host 200.200.200.35 eq www
access-list 100 permit tcp any host 200.200.200.35 eq 443
access-list 100 permit tcp any host 200.200.200.36 eq www
access-list 100 permit tcp any host 200.200.200.36 eq 443
access-list 100 permit icmp any one
access-list 100 permit tcp any host 200.200.200.35 eq ftp
access-list 100 permit tcp any host 200.200.200.36 eq ftp
access-list 100 permit tcp any host 200.200.200.36 eq 3389
access-list 100 permit tcp any host 200.200.200.35 eq 3389
access list 100 permit tcp any host 200.200.200.36 EQ field
access-list 100 permit udp any host 200.200.200.36 EQ field
access-list 100 permit tcp any host 200.200.200.38 eq www
access-list 100 permit tcp any host 200.200.200.38 eq 443
access-list 100 permit tcp any host 200.200.200.38 eq 3389
access-list 100 permit tcp any host 200.200.200.37 eq www
access-list 100 permit tcp any host 200.200.200.38 eq 1547
access-list 100 permit tcp any host 200.200.200.39 eq 3389
access-list 100 permit tcp any host 200.200.200.39 eq ftp
access-list 100 permit tcp any host 200.200.200.39 eq 1433
IP outdoor 200.200.200.34 255.255.255.224
IP address inside 192.168.1.1 255.255.255.0
IP dmz 192.168.2.1 255.255.255.0
Global (outside) 1 200.200.200.45 - 200.200.200.61 netmask 255.255.255.224
Global (outside) 1 200.200.200.62 netmask 255.255.255.224
NAT (inside) 1 192.168.1.0 255.255.255.0 0 0
alias (inside) 192.168.1.2 200.200.200.38 255.255.255.255
alias (inside) 200.200.200.36 192.168.2.11 255.255.255.255
alias (inside) 200.200.200.35 192.168.2.10 255.255.255.255
alias (inside) 200.200.200.37 192.168.2.12 255.255.255.255
static (dmz, external) 200.200.200.36 192.168.2.11 netmask 255.255.255.255 0 0
static (dmz, external) 200.200.200.35 192.168.2.10 netmask 255.255.255.255 0 0
public static 200.200.200.38 (inside, outside) 192.168.1.2 mask subnet 255.255.255.255 0 0
public static 200.200.200.39 (Interior, exterior) 192.168.1.186 netmask 255.255.255.255 0 0
static (inside, dmz) 192.168.1.0 192.168.1.0 netmask 255.255.255.0 0 0
static (dmz, external) 200.200.200.37 192.168.2.12 netmask 255.255.255.255 0 0
Access-group 100 in external interface
Route outside 0.0.0.0 0.0.0.0 200.200.200.33 1
Did you apply an access list to allow traffic from the dmz to the inside interface?
Also, try to be specific with the server you are trying to provide access to the.
static (inside, dmz) xx.xx.xx.xx xx.xx.xx.xx 255.255.255.255 netmask (where two groups of xx.xx.xx.xx represent your address of sql server)
Then add the following list of access
access-list 101 permit tcp any host xx.xx.xx.xx eq sql (again, xx.xx.xx.xx is sql server)
Access-group 101 in the dmz interface
(test you can do initially access list permit all traffic instead of just sql, then tighten it to the top when you are sure that the static command works)
Hope that helps. Allowing less than an interface on a security interface traffic higher security is carried out with controls static and ACL (or ducts), so you seem to be on the right track.
~ rls
-
Error 13: Can not access the servers of Microsoft Website
Original title: why I can't access this website?
http://EPG.tvdownload.Microsoft.com/
In an effort to resolve an error code 13 epg download problem in Windows Vista Media Center I would like to go on this Web site. I'm becoming more convinced that the problem may be with the server providing the news. on my Media Center guide. If I understand correctly the original info. just Zap2It .com and is sent to a server that is operated and maintained by Microsoft which then sends the info. Media Center Guide. iI have obtained some information that seems to say that the server or the information on it can be on this Web site.
Hello DAYORK57,
Have you downloaded the updated Cumulative in Media Center? It is dated from 21/06/2010
This can help with the problem you are experiencing.Check the following:
For x 86:
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a85e9433-50d2-4AF4-ab08-3e75be1dc9d6For 64-bit:
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=91d08f81-70a3-4c4f-91e4-ad4d0a8d1f3fPlease answer back with an update on your question.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
A procedure to remove a VMFS Volume?
Hello
We use EMC CLARiiON CX4 SAN
We have created 5 VMFS volume and am migrated VMs.
We will remove the VMFS-3 volume. We would like to ask for your opinion if the next step is correct?
(1) remove the Volume VMFS VI client
(2) remove the VI Client VMFS Volume
(3) delete the storage group logical unit number in EMC Enterprise Manager
(4) destroy the LUNS in EMC Enterprise Manager.
Thank you
Looks fine measures, more take a look at this article
-
No write access to vmfs volumes
Hi people,
first my setup:
SAN storage to a DataCore SANMelody Server (HP DL380 G5)
2 2.5.4 ESX servers accessing the (VMFS 2.52) vmfs2 volumes via FC HBA (HP DL585 G2)
ESX 3i (3.5.0, 123629 (1) to access the vmfs2 volumes via iSCSI (HP DL585 G2)
In Configuration\Storage the volumes that all are listed (readonly or protected against writing).
The server SANMelody says I have read/write access to the storage.
What could be the problem? ESXi is not able to write to vmfs2?
TIA
Kelsey
ESX 2.5 will not identify VMFS3. Using virtualcenter?
-
VMware 5.5 Upgrade breaks access the VMFS data store (kind of)
Now, before I get off, I will say that I am sure that the host I'm doing this on IS NOT on the HCL.
(why I'm running old hardware?-c' is a community organization that I volunteer for which relies on hardware dontated)
However, please read on.
Updated an IBM x 3500 and a x 3650 (same generation - they are basically Tower and rack mount versions of the same kit) to esxi 5.1 to 5.5.
(Exactly the same problem on both)
Local storage - IBM Serveraid (aacraid)
I was a bit confused as the controllers of disk and LUN show always also visible (just no VMFS didn't recognize any time how I rescan).
(normally the LUNS do not appear due to a driver does not)
I found that I was able to get future LUNS by practice
'Add a storage '.
"Disk/LUN.
(30-60 seconds then shows the LUNS)
It shows the drive bays, I click Next and select "mount disc and keep the signature '...
The lun then comes fine and everything works.
However rebooting it gets lost again and I have to repeat the process to get the VMFS volumes to come back.
Possible entries for the vmkernel.log
(2014 04-22 T 19: 56:42.265Z cpu2:33418) vmklnx_aacraid bunch of module: creation succeeded. ID = 0x410a640c1000
(2014 04-22 T 19: 56:42.265Z cpu2:33418) < 6 > Adaptec aacraid driver 1.2.1.30300
(2014 04-22 T 19: 56:42.265Z cpu2:33418) PCI: driver aacraid seeks devices
(2014 04-22 T 19: 56:42.265Z cpu2:33418) DMA: 612: DMA engine ' vmklnxpci - 0:3:0.0' created using the Mapper "DMANull."
(2014 04-22 T 19: 56:42.265Z cpu2:33418) DMA: 612: DMA engine ' vmklnxpci - 0:3:0.0' created using the Mapper "DMANull."
(2014 04-22 T 19: 56:42.308Z cpu2:33418) IRQ: 540: 0x2b < aacraid > shareable, flags 0x10
(2014 04-22 T 19: 56:42.308Z cpu2:33418) VMK_VECTOR: 218: Manager registered for 0xff2b, 0x10 shared interrupt flags
(2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: kernel 5.2 - 0 [17003] July 25, 2011
(2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: monitor 5.2 - 0 [17003]
(2014 04-22 T 19: 56:43.984Z cpu2:33418) aacraid0 < 6 >: bios 5.2 - 0 [17003]
aacraid0 < 6 >: serial
(2014 04-22 T 19: 56:44.000Z cpu2:33418) VMK_PCI: 395: 0000:03:00.0 device name: vmhba1
(2014 04-22 T 19: 56:44.000Z cpu2:33418) DMA: 612: DMA "vmhba1" engine, created using the Mapper "DMANull."
(2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C0:T0:L0': seller: 'SERVERA' model: Rev "DIS1": "V1.0".
(2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 979: path "vmhba1:C0:T0:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)
(2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiUid: 273: "vmhba1:C0:T0:L0" path does not support VPD device Id page.
(2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 1105: path 'vmhba1:C0:T0:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»
(2014 04-22 T 19: 56:44.000Z cpu2:33418) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0
0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20
(2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 1503: Add the path: vmhba1:C0:T0:L0
(2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C0:T1:L0': seller: 'SERVERA' model: Rev "SATA1": "V1.0".
(2014 04-22 T 19: 56:44.000Z cpu2:33418) ScsiScan: 979: path "vmhba1:C0:T1:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)
(2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiUid: 273: "vmhba1:C0:T1:L0" path does not support VPD device Id page.
(2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiScan: 1105: path 'vmhba1:C0:T1:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»
(2014 04-22 T 19: 56:44.001Z cpu2:33418) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0
0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20
(2014 04-22 T 19: 56:44.001Z cpu2:33418) ScsiScan: 1503: Add the path: vmhba1:C0:T1:L0
(2014 04-22 T 19: 56:44.018Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T0:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.
(2014 04-22 T 19: 56:44.018Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.020Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T0:L0: not found
(2014 04-22 T 19: 56:44.021Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T1:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.
(2014 04-22 T 19: 56:44.021Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T1:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.023Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T1:L0: not found
(2014 04-22 T 19: 56:44.025Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T2:L0': seller: "IBM-ESXS" model: Rev 'ST3300655SS': 'BA2D '.
(2014 04-22 T 19: 56:44.025Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T2:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.027Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T2:L0: not found
(2014 04-22 T 19: 56:44.029Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T3:L0': seller: model "IBM-ESXS": "N VPBA300C3ETS11' Rev:"A496.
(2014 04-22 T 19: 56:44.029Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T3:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.032Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T3:L0: not found
(2014 04-22 T 19: 56:44.034Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T4:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.
(2014 04-22 T 19: 56:44.034Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T4:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.039Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T4:L0: not found
(2014 04-22 T 19: 56:44.041Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T5:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.
(2014 04-22 T 19: 56:44.041Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T5:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.047Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T5:L0: not found
(2014 04-22 T 19: 56:44.049Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T6:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A34H '.
(2014 04-22 T 19: 56:44.049Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T6:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.054Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T6:L0: not found
(2014 04-22 T 19: 56:44.056Z cpu2:33418) ScsiScan: 976: path 'vmhba1:C1:T7:L0': seller: 'HUA72202' model: Rev '0ALA330': 'A3GA '.
(2014 04-22 T 19: 56:44.056Z cpu2:33418) ScsiScan: 979: path "vmhba1:C1:T7:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.061Z cpu2:33418) WARNING: ScsiScan: 1408: cannot add the path vmhba1:C1:T7:L0: not found
(2014 04-22 T 19: 56:44.844Z cpu3:33418) ScsiScan: 976: path 'vmhba1:C3:T0:L0': seller: "IBM" model: "SAS SES-2 DEVICE" Rev: "1.11'."
(2014 04-22 T 19: 56:44.844Z cpu3:33418) ScsiScan: 979: path "vmhba1:C3:T0:L0": Type: 0xd, ANSI rev: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.845Z cpu3:33418) ScsiScan: 1503: Add the path: vmhba1:C3:T0:L0
(2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 976: path 'vmhba1:C3:T1:L0': seller: "IBM" model: "SAS SES-2 DEVICE" Rev: "1.11'."
(2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 979: path "vmhba1:C3:T1:L0": Type: 0xd, ANSI rev: 5, TPGS: 0 (none)
(2014 04-22 T 19: 56:44.874Z cpu3:33418) ScsiScan: 1503: Add the path: vmhba1:C3:T1:L0
(2014 04-22 T 19: 56:44.903Z cpu3:33418) PCI: driver claimed aacraid device 0000:03:00.0
(2014 04-22 T 19: 56:44.903Z cpu3:33418) PCI: driver claimed aacraid 1 device
(2014 04-22 T 19: 56:44.903Z cpu3:33418) ScsiNpiv: 1510: GetInfo for adapter vmhba1, [0x4108991c4400], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020
(2014 04-22 T 19: 56:44.903Z cpu3:33418) Mod: 4780: aacraid initialization succeeded with module ID 4174.
(2014 04-22 T 19: 56:44.903Z cpu3:33418) aacraid loaded successfully.
(2014 04-22 T 19: 57:07.090Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba32:C0:T0:L0 '.
(2014 04-22 T 19: 57:07.090Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba0:C0:T0:L0 '.
(2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C3:T1:L0 '.
(2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C3:T0:L0 '.
(2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C0:T1:L0 '.
(2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba1:C0:T0:L0 '.
(2014 04-22 T 19: 57:07.091Z cpu6:33204) ScsiUid: 273: "vmhba1:C0:T0:L0" path does not support VPD device Id page.
(2014 04-22 T 19: 57:07.092Z cpu6:33204) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0
0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20
(2014 04-22 T 19: 57:07.092Z cpu6:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C0:T0:L0 for the device "unregistered".
(2014 04-22 T 19: 57:07.092Z cpu6:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]
(2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiEvents: 501: events subsystem: device, created events!
(2014 04-22 T 19: 57:07.092Z cpu6:33204) VMWARE SCSI Id: Id for vmhba1:C0:T0:L0
0 x 39 0 x 62 0 x 34 0 x 63 0x61 0 x 30 0x61 0 x 63 x 0 53 0 x 41 0 x 53 0 x 31 0x20 0x20
(2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba1:C0:T0:L0" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.092Z cpu6:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba1:C0:T0:L0" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.092Z cpu7:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba1:C0:T0:L0 unit could not detect. Failure of the error.
(2014 04-22 T 19: 57:07.114Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba1:C0:T0:L0:1': not supported
(2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba1:C0:T0:L0" from plugin "NMP" of type 0
(2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiUid: 273: "vmhba1:C0:T1:L0" path does not support VPD device Id page.
(2014 04-22 T 19: 57:07.114Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0
0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20
(2014 04-22 T 19: 57:07.114Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C0:T1:L0 for the device "unregistered".
(2014 04-22 T 19: 57:07.114Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]
(2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!
(2014 04-22 T 19: 57:07.114Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C0:T1:L0
0 x 39 0 x 37 x 0 39 0 x 38 0x61 0 x 30 0x61 0 x 63 0 x 53 0 x 41 0 x 54 0x41 0 x 31 0x20
(2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba1:C0:T1:L0" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.114Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba1:C0:T1:L0" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.115Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba1:C0:T1:L0 of the unit could not detect. Failure of the error.
(2014 04-22 T 19: 57:07.154Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba1:C0:T1:L0:1': not supported
(2014 04-22 T 19: 57:07.154Z cpu2:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba1:C0:T1:L0" from plugin "NMP" of type 0
(2014 04-22 T 19: 57:07.156Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C3:T0:L0 for the device "unregistered".
(2014 04-22 T 19: 57:07.156Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]
(2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!
(2014 04-22 T 19: 57:07.156Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C3:T0:L0
0 x 50 0x05 0 x 07 0x6c 0 x 07 0xbf 0xe2 0 x 79 0 x 53 x 0 41 0 x 53 0x20 0 x 53 0 x 45
(2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "naa.5005076c07bfe279" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.156Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "naa.5005076c07bfe279" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.166Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL
(2014 04-22 T 19: 57:07.166Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe279' of device NMP doubt; asked the State of the fast path update...
(2014 04-22 T 19: 57:07.166Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 24 world 0-dev 'naa.5005076c07bfe279' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.
(2014 04-22 T 19: 57:07.187Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL
(2014 04-22 T 19: 57:07.207Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for naa.5005076c07bfe279 of the unit could not detect. Initiator error of storage.
(2014 04-22 T 19: 57:07.217Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 25 world 0-dev 'naa.5005076c07bfe279' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.
(2014 04-22 T 19: 57:07.253Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 26 0-dev 'naa.5005076c07bfe279' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.
(2014 04-22 T 19: 57:07.289Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x27 0-dev 'naa.5005076c07bfe279' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.
(2014 04-22 T 19: 57:07.317Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe279' the path 'vmhba1:C3:T0:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL
(2014 04-22 T 19: 57:07.317Z cpu2:33204) ScsiDevice: 3443: device successfully registered "naa.5005076c07bfe279" from plugin "NMP" of type 13
(2014 04-22 T 19: 57:07.318Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba1:C3:T1:L0 for the device "unregistered".
(2014 04-22 T 19: 57:07.318Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]
(2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!
(2014 04-22 T 19: 57:07.318Z cpu2:33204) VMWARE SCSI Id: Id for vmhba1:C3:T1:L0
0 x 50 0x05 0 x 07 0x6c 0 x 07 0xbf 0xe2 0x7b 0 x 53 x 0 41 0 x 53 0x20 0 x 53 0 x 45
(2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "naa.5005076c07bfe27b" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.318Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "naa.5005076c07bfe27b" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.328Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL
(2014 04-22 T 19: 57:07.328Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe27b' of device NMP doubt; asked the State of the fast path update...
(2014 04-22 T 19: 57:07.328Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 28 World 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.
(2014 04-22 T 19: 57:07.350Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL
(2014 04-22 T 19: 57:07.371Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for naa.5005076c07bfe27b of the unit could not detect. Initiator error of storage.
(2014 04-22 T 19: 57:07.381Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0 x 29 World 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.
(2014 04-22 T 19: 57:07.417Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x2a 0-dev 'naa.5005076c07bfe27b' world has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.
(2014 04-22 T 19: 57:07.453Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e808916c0) 0x1a, CmdSN 0x2b world 0-dev 'naa.5005076c07bfe27b' has no sense H:0 x 7 D:0 x 0 x 0 possible P:0-data: 0 x 0 0 x 0 0 x 0.
(2014 04-22 T 19: 57:07.479Z cpu3:32792) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412e808916c0, 0) dev 'naa.5005076c07bfe27b' the path 'vmhba1:C3:T1:L0' Failed: H:0 x 7 D:0 x 0 P:0 x 0 Possible sense data: 0 x 0 0 x 0 0 x 0. Law: EVAL
(2014 04-22 T 19: 57:07.479Z cpu2:33204) ScsiDevice: 3443: device successfully registered "naa.5005076c07bfe27b" from plugin "NMP" of type 13
(2014 04-22 T 19: 57:07.501Z cpu2:33204) ScsiUid: 273: "vmhba0:C0:T0:L0" path does not support VPD device Id page.
(2014 04-22 T 19: 57:07.510Z cpu2:33204) VMWARE SCSI Id: could not get the disc for vmhba0:C0:T0:L0 id
(2014 04-22 T 19: 57:07.510Z cpu2:33204) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba0:C0:T0:L0 for the device "unregistered".
(2014 04-22 T 19: 57:07.511Z cpu2:33204) StorageApdHandler: 698: APD handle created with lock [StorageApd0x410899]
(2014 04-22 T 19: 57:07.511Z cpu2:33204) ScsiEvents: 501: events subsystem: device, created events!
(2014 04-22 T 19: 57:07.520Z cpu2:33204) VMWARE SCSI Id: could not get the disc for vmhba0:C0:T0:L0 id
(2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7409: get VPD 80 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7419: get VPD 83 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 7455: get VPD 86 inquiry for device "mpx.vmhba0:C0:T0:L0" from Plugin "NMP" failed. Not supported
(2014 04-22 T 19: 57:07.520Z cpu2:33204) ScsiDeviceIO: 6169: QErr setting for mpx.vmhba0:C0:T0:L0 unit could not detect. Way to not found error.
(2014 04-22 T 19: 57:07.520Z cpu3:33204) ScsiDevice: 3443: device successfully registered "mpx.vmhba0:C0:T0:L0" from plugin "NMP" of type 5
(2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: detected SCSI revision number 6 on vmhba32
(2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: correction of the survey data to change the revision number of the SCSI 6 to 2 on vmhba32
(2014 04-22 T 19: 57:07.521Z cpu4:33366) usb-storage: correction of the survey data to change removable media, bit of 'stop' on 'on' on vmhba32
(2014 04-22 T 19: 57:13.043Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe279' of device NMP doubt; asked the State of the fast path update...
(2014 04-22 T 19: 57:13.043Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e80898f40) 0x1a, CmdSN 0xd0 world 0-dev 'naa.5005076c07bfe279' has no data of sense H:0 x 7 D:0 x 0 x 0 possible P:0: 0x5 0x20 0x0.
(2014 04-22 T 19: 57:13.081Z cpu3:32792) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237: State of 'naa.5005076c07bfe27b' of device NMP doubt; asked the State of the fast path update...
(2014 04-22 T 19: 57:13.081Z cpu3:32792) ScsiDeviceIO: 2337: Cmd (0x412e80898f40) 0x1a, CmdSN 0xd1 world 0-dev 'naa.5005076c07bfe27b' has no data of sense H:0 x 7 D:0 x 0 x 0 possible P:0: 0x5 0x20 0x0.
(2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8355: mpx.vmhba1:C0:T1:L0:1 detected device can be a snapshot:
(2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8362: questioned disc ID: type 1, len 14, lun 0, devType 0, scsi 0, h (id) 16746273972281211240 >
(2014 04-22 T 19: 57:13.123Z cpu2:33204) LVM: 8369: ID of the disk drive: type 0, len 10, lun 0, devType 0, scsi 0, h (id) 1308713170419776745 >
(2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8355: mpx.vmhba1:C0:T0:L0:1 detected device can be a snapshot:
(2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8362: questioned disc ID: type 1, len 14, lun 0, devType 0, scsi 0, h (id) 15010766293529110797 >
(2014 04-22 T 19: 57:13.124Z cpu2:33204) LVM: 8369: ID of the disk drive: type 0, len 10, lun 0, devType 0, scsi 0, h (id) 13427631733060988540 >
(2014 04-22 T 19: 57:13.131Z cpu2:33204) SFS: 5092: pilot no. FS claimed device 'mpx.vmhba0:C0:T0:L0': unsupported
(2014 04-22 T 19: 57:13.155Z cpu2:33204) Vol3: 714: could not read the header of control volume: unsupported
(2014 04-22 T 19: 57:13.155Z cpu2:33204) Vol3: 714: could not read the header of control volume: unsupported
(2014 04-22 T 19: 57:13.155Z cpu2:33204) SFS: 5092: pilot no. FS claimed "on the remote control": unsupported
(2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2059: device rescan time 101 msec (total number of 5 devices)
(2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2062: Filesystem probe time 70 msec (devices surveyed 5 on 5)
(2014 04-22 T 19: 57:13.202Z cpu2:33204) VC: 2064: refresh the open volume time 0 msec
(2014 04-22 T 19: 57:14.826Z cpu3:32851) LVM: 13089: one or more LVM devices have been discovered.
Commissioning services2014-04 - 22 T 19: 57:16.014Z cpu0:32895) Tcpip_Vmk: 123: nd6_rs_timer: no router on 'vmk0 '. Waive
(2014 04-22 T 19: 57:16.531Z cpu1:33651) VisorFSRam: 634: vsantraces with (0,300,0,0,755)
(2014 04-22 T 19: 57:16.531Z cpu1:33651) SFS: 6895: mounting fs visorfs (4108aa584010) with o 0,300,0,0,1,0755, vsantraces on 4108af971220 file descriptor
Possible the syslog.log entries
2014 04-15 T 04: 50:20Z jumpstart: storage Info: unable to volume VMFS Mount with the UUID 522a475e-80e96251-5f62-00215e4e123e. SysInfo error on return operation State: County of parameter not valid. See the VMkernel detailed error information log
2014 04-15 T 04: 50:20Z jumpstart: storage Info: unable to volume VMFS Mount with the UUID 522 a 4783-5bbdaecf-9237-00215e4e123e. SysInfo error on return operation State: County of parameter not valid. See the VMkernel detailed error information log
Someone at - it useful ideas?
Thank you!
Either you have to will the volumes - or clean all paths dead in your esx.conf
-
Can access virtual servers, but not the server host after vpn
When on the network, I can access the host server and all other virtual servers (virtualized with virtualbox). But when I connect with VPN I have no access to the main server, but I have access to any of the host servers - and I can get access to the main server of one of the host servers.
Where do I start looking?
using of 5505 and asa version 8.4 is (2).
The nat setup is like this:
3 (inside) (outside) static source any any static destination NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 non-proxy-arp-search to itinerary
translate_hits = 0, untranslate_hits = 0
4 (inside) (outside) static source any any static destination NETWORK_OBJ_192.168.1.128_27 NETWORK_OBJ_192.168.1.128_27 non-proxy-arp-search to itinerary
translate_hits = 0, untranslate_hits = 0
5 (inside) (outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.254.0_28 NETWORK_OBJ_192.168.254.0_28 non-proxy-arp-search of route static destination
translate_hits = 37, untranslate_hits = 63771
6 (on the outside) to dynamic interface of the NET-VPNPOOL source (outdoor)
translate_hits = 0, untranslate_hits = 0
On the host, I see that you have 2 default gateways configured. It can have 1 default gateway, and to the other interface, you must configure static routes for specific access.
The interface that needs to connect to the Internet should have the configured default gateway. The traffic that pass through the interface of the SAA should also go in and out the same set of interface, IE: If the host server connects to the interface via dmz out to the external interface, the return traffic must also go through this path, apart from the interface and return to the dmz interface.
-
My newly created vmfs volume is the only version 3.46?
Hello, just trying to understand what is happening. I just created a new VMFS volume on my 5.0 (build 914586) and when I look at the version in vCenter it says that his version 3.46? When I look to the top of versioning it states my new volume should be 5.54. None of these hosts have been upgraded on the spot they are all fresh versions of ESXi 5.0 914586. How can I create a volume and ensure his 5.54 early?Thank you
Don
When you create a data store, you can create a VMFS5 or VFS3 data store. Can you confirm that vmfs5 is selected in the wizard?
André
-
Should the hosts to access the same VMFS * always * be grouped?
Hi all
As stated above, given a config where there are several ESX / I host & multiple VMFS volumes, you should set up clusters, then present the storage shared for clusters, etc.
However, I see a config for the moment where there are a number of 'independent' hosts (managed by the same VCenter) that are * not * in a cluster, but each host is running VMs to the same shared storage.
Is this a reasonable config? It is not me! I'm looking into why they have not grouped (they have business licenses), but I wanted to check if it is an acceptable (i.e. supported) config because it seems a little strange to me!
(If I could be pointed toward a document covering so it would be ideal to support my argument).
Kind regards
Paul
Hi Paul,.
You are right, there is no such requirement as incase of Windows Cluster.
Concerning
-
Clone the virtual machine between two ESX 3.5.0 servers (low connection)
Hi all!
I have two ESX 3.5.0 servers that are managed by a vCenter servers one have just the connection of 32 KB.
I need to clone one of my virtual machines from one to the other ESX is W2k8 created with 40 GB HARD drive. I tried to start it clone trough my low connection, but the task is about 86% for 4 days :|
Is it possible to clone virtualmachine on one of my ESX for its local storage and after that, get it by vCenter for example an external HARD drive and then copy them all to my second ESX? How to run copied virtual machine on my second ESX? Maybe I can do it with another way - ideas?
Two ESX are the same versions and machines, only the names and the ip addresses are different.
Thanks for the tips
Kris
I don't think it is possible since the virtual disk will be 40 GB in size - I was suggesting using a laptop as a server NFS ESX sees and access the virtual machine for this storage clone - it take the first vessel of ESX host it to secondary site attach NFS datastore on the second ESX Server and using the browser of data store you navigate to the cloned VMX of VM file and to him the second ESX host - you can cold migrate leaving the second host and then move the cursor above for the storage you want.
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
SAN access to VMFS volume snapshot
So here's the deal. I have a Compellent SAN can I take replays (snapshots) of the volume. I spun this VMFS volume and tried to attach it to an ESX Server. The problem is that ESX server does not see anything on the volume even if it is indeed a VMFS volume. My guess - there is something on the volume as a GUID or something that the VMFS volume snapshot matches the orginial and forces him not not to be recognized.
Any thoughts on how to pull this off? There are a couple of VMDK files on this shot I have to take out of it.
Thank you
Richard
Hi Richard, you are right. The host is detect it as a snapshot so it won't be installed because it would have the same UUID as a volume already mounted (you will see a message to that effect in the vmkernel journal). To work around this problem, go to advanced-> LVM-> and the value of LVM. EnableResignature = 1 and LVM. DisallowSnapshotLun = 0. And then perform a new analysis. The LUN should get mounted as a data store named "snap - 0000001 - < datastore_name >" or something similar. Be sure to change the settings advanced to LVM. EnableResignature = 0 and LVM. DisallowSnapshotLun = 1 after seeing the snapshot data store appear just to be sure. Hope that helps!
Please, help me by awarding points for a 'useful' or 'proper' response if you think it is useful!
-Amit
-
I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.
* original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*
The application-specific permission settings do not authorization for the application server COM with the CLSID{DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.In the opposite case
http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html
http://TechNet.Microsoft.com/en-us/network/bb545879
http://www.blackviper.com/wiki/Network_Access_Protection_Agent
-
No volume on the toolbar icon and cannot access the volume level
When the computer stops unexpectedly, I lose volume icon. I can't accdd the volume icon in the control panel check to include the icon on the toolbar. I have sound but I can not access the volume level and have no volume on the toolbar icon
Hello
1. don't you make changes to the computer until the problem occurred?
2 when was the last time it was working fine?
I suggest you try the steps below and check if it helps
Method 1: Try to run fix it from the link below:
System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
http://support.Microsoft.com/kb/945011
Method 2: Try the following steps to add the volume icon in the taskbar
i. right click on the Start button and then click Properties.
II. click the Notification area.
III. put a check mark on the volume icon.
IV. click apply & OK. Check if you see the volume icon in the taskbar.
Method 3: If the problem persists, try the steps from the link below http://windows7themes.net/volume-icon-missing-in-windows-7-restore-it.html
Hope this information is useful.
-
Lack of access to the balance of audio volume control
The balance function is 'available', but now hidden in Windows 7. Is it possible to use a script or macro to quickly access the balance control? W7 the access sequence for me is 1) Windows task bar (click to view)--> Start (button)--> Control Panel (list)--> material & audio (hyperlink)--> system (hyperlink) change sounds--> reading (tab)--> helmet (icon)--> properties (button)--> levels (tab)--> Balance (button)--> press '1' (scroll bar) and the key '2' (scroll bar)!
A previous post, "can not balance sound in Windows 7", addressed to this situation with a label that showed more frustration a question. The response was useless for recommended action reduces the string above: click right volume (icon)--> (list) of sounds--> reading (tab)--> helmet (icon)--> properties (button)--> levels (tab)--> Balance (button)--> press '1' (scroll bar) and the key '2' (scroll bar)!
My comments are: 1) I could not designed access more complicated if I had a degree in software development. 2) what's up with "Key 1" and "key 2"? People have a left ear and right ear. (3) I read that more than 10% of the American population live with hearing loss. The loss is not symmetrical. A balance of ready-access control is an important element.
Please consider to improve this feature.
Hello
Can you tell us if there is a volume icon in the system tray, if not then please follow these steps below to activate the volume icon in the system tray.
1 right click in the taskbar near the time display and you'll get a context menu.
2. click on properties.
3. under the system always icons display, check the volume.
4. click on apply.
Also note the way the quickest way to change the volume of your computer speakers is to click the speakers button in the notification area of the taskbar
Right-click on the "speaker" icon and select the open volume mixer.1. on the speaker, once you get the properties of speaker.
2. Select the levels tab.
3. here, depending on the output device, you can goahead and balance the left and right output device.
4. it's only the easiest to access the balance of volume.
If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...
https://connect.Microsoft.com/dashboard/Info/Thank you, and in what concerns:
I. Suuresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forumand let us know what you think.
Maybe you are looking for
-
How can I retrieve my calendar entries?
Yesterday, I finally upgraded from Cougar to El Capitan. All goes well and more easily than expected. This morning, when I opened my diary, there is no entries! How can I retrieve my calendar entries? I have two backups on external hard drives.
-
I have trouble to install three updates. It comes up with an error code 646. How can I fix.
Windows Update does not install the updates since 10/18/09. Error code 646
-
Error reading disc after reinstalling xp
I've seen similar positions but with no solution to this. Hope you can help. I updated my laptop drive and installed XP using the recovery disk. Formatted in NTFS ok. The installation was flawless. After restarting, I got a message "disc error". Rebo
-
HelloI have a gateway MT6460, Windows Vista 32-bit model. I got this update for my sound card on the site of the bridge, it has downloaded to my desktop and double clicked on it when it was all the download and it came with this error message. It is
-
HP G71-340US: USB 2.0 adapter USB 3.0 for HP G71-340US
I would like to get USB 2.0 to USB 3.0 adapter for HP G71-340US. If there is. Is this possible?