No XML code generated when you create the POJO data control

Similar Questions

• I am still getting error code 8004ff83 when you perform the update

  I am still getting error code 8004ff83 when you perform the update

  I read that in safe mode, it would be possible to do the update. What is safe mode?

  Hello

  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• Impact on performance when you use the LONG data type

  Hi all
  
  
  Only I have a doubt about the use of LONG data type
  
  I use the data type LONG for some columns in a table and I created indexes on the columns separately, but these column values can be easily fit into the varchar data type.
  
  (Just to see the performance on this issue)
  
  Suppose that a common select query with WHERE condition on any of the column which has LONG data type will affect the performance of the query?
  
  Please explain.
  
  Thank you

  (1) the LONG (and LONG RAW) data types have been depricated for quite a while. Oracle has been strongly recommends that you move to 8.1.5 CLOB and BLOB data types. Why you use the LONG data type? You're still on Oracle 7?

  (2) have you tried to write a query that has a WHERE condition that refers to a LONG column? In general, you can not because it does not support the type of data LONG. For example

  SQL> ed
  Wrote file afiedt.buf
  
    1  create table a (
    2    col1 varchar2(30),
    3    col2 long
    4* )
  SQL> /
  
  Table created.
  
  SQL> select * from a where col2='abc';
  select * from a where col2='abc'
                        *
  ERROR at line 1:
  ORA-00997: illegal use of LONG datatype
  

  LONG data types are a royal pain to work with. They also have implications on the performance of wicked on the client.

  Justin

• Filtering problem date to the table QBE filter when it is supported by the POJO data control

  @Timo Hahn ADFfan 11.1.1.4 or 11.1.1.7

  I have exactly the same problem as described in the discussion archived here unanswered

  Definiton vc_temp_1 not found error for the filter of the columns date

  I used the sample downloaded 37 here as a model

  037. how to build the pagination in the POJO ADF data control

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

  It is easy to replicate, just to run this sample and try to filter on the date of hire.  It takes about 2 minutes to download and run.

  sample image 37 running on 11.1.1.7

  

  Here is the stacktrace.   Don't know why it's using java.sql.Timestamp.   My POJO returns a java.lang.Date

  java.lang.IllegalArgumentException: timestamp format must be yyyy-mm-dd hh: mm: [.fffffffff]

  at java.sql.Timestamp.valueOf(Timestamp.java:194)

  to oracle.jbo.common.JboTypeMapEntries$ 3.convert(JboTypeMapEntries.java:149)

  at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:855)

  at oracle.jbo.domain.TypeFactory.getInstance(TypeFactory.java:102)

  at oracle.jbo.common.JboTypeMapEntries.convertValue(JboTypeMapEntries.java:382)

  at oracle.jbo.common.OracleTypeMapEntries.convertValue(OracleTypeMapEntries.java:162)

  at oracle.jbo.common.JboTypeMap.convertValue(JboTypeMap.java:869)

  at oracle.jbo.domain.TypeConvMapEntry.convert(TypeConvMapEntry.java:120)

  at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:855)

  at oracle.jbo.domain.TypeFactory.getInstance(TypeFactory.java:102)

  at oracle.jbo.RowComparator.compareEquals(RowComparator.java:34)

  at oracle.jbo.RowValueSupplier.compareValues(RowValueSupplier.java:253)

  at oracle.jbo.expr.JIParserNode.evaluate(JIParserNode.java:1274)

  at oracle.jbo.ExprEval.doEvaluate(ExprEval.java:1099)

  at oracle.jbo.ExprEval.evaluateForRow(ExprEval.java:911)

  at oracle.jbo.RowMatch.rowQualifies(RowMatch.java:187)

  at oracle.jbo.server.ViewObjectImpl.rowQualifies(ViewObjectImpl.java:2811)

  at oracle.jbo.server.QueryCollection.rowQualifies(QueryCollection.java:3705)

  at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:3590)

  at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:3387)

  at oracle.jbo.server.QueryCollection.sortRows(QueryCollection.java:994)

  at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1184)

  at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:1338)

  at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:1256)

  at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:1250)

  at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:6809)

  at oracle.adf.model.bean.DCBeanDataControl.executeIteratorBinding(DCBeanDataControl.java:948)

  at oracle.adf.model.binding.DCIteratorBinding.doExecuteQuery(DCIteratorBinding.java:2177)

  at oracle.jbo.uicli.binding.MyIteratorBinding.executeQuery(JUAccessorIteratorDef.java:721)

  at oracle.jbo.uicli.binding.JUSearchBindingCustomizer.applyAndExecuteViewCriteria(JUSearchBindingCustomizer.java:607)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.processQuery(FacesCtrlSearchBinding.java:442)

  application example will reproduce the problem with no changes

  Post edited by: Don Kleppinger confirmed it happens on 11.1.1.7 as well (see image)

  Frank Nimphius-Oracle

  I have a work around for this bug to Oracle.  I have a version in 037 sample that actually works and that will sort the field date.  I'm ready to download a copy to replace the download version that is there if Oracle is listening.  The sample was there 5 years ago so it is regrettable that this bug still exists.

  That's what I did

  create beans with custom queryListener

  On the table

  change

  queryListener = "#{bindings.allEmployeesQuery.processQuery} '"

  TO

  queryListener = "#{queryListenerBean.processQuery} '"

  Add an additional field to the line which is a long value of the Date column.   In the queryListener I change the input filter on the value of long type instead of the date value.

  I do not display the column containing the value of long (time) in the table, but she must appear in the binding of the tree. (shuttles to the right)

  In the listener query

  • Read the filter value Date and read the value of time full, clear the value of the filter date
  • long time set in the filter
  • Run the query by call of the listener of the original request #{bindings.allEmployeesQuery.processQuery}
  • Set the date value to the value entered by the user
  • erase the value of long type

  Here is the code

  {} private void processQuery (QueryEvent queryEvent)

  Table richeTableau = (RichTable) queryEvent.getComponent ();

  FilterableQueryDescriptor filterQD = (FilterableQueryDescriptor) table.getFilterModel ();

  Card filterCriteria = filterQD.getFilterCriteria ();

  Date dt = (Date) filterCriteria.get ("hireDate");

  time of to of subject Date and filter on hireDateLong instead of column hireDate column

  containing the value of long type of date instead of the Date

  If (dt! = null) {}

  TM long = dt.getTime ();

  filterCriteria.put ("hireDateLong", tm);

  filterCriteria.put ("hireDate", null); This must be null or will not work

  }

  DCBindingContainer bc = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  Object execBinding = bc.findExecutableBinding ("allEmployeesQuery");

  does not perform a cast of the class internal oracle but another technique guided under

  does not work with POJO data control

  run the filter

  (ExecBinding) .processQuery (queryEvent) (FacesCtrlSearchBinding);

  This will fail

  invokeQueryEventMethodExpression ("#{bindings.allEmployeeesQuery.processQuery}",)

  restore the value of the filter if he continues to display in the QBE bar

  filterCriteria.put ("hireDate", dt);

  filterCriteria.put ("hireDateLong", null);

  }

• Error importing metadata when you create the import profile

  Hi guys,.

  I am creating an interface to metadata (out-of-the-box) to Fusion (source) to a HFM application. I have successfully completed the following activities:

  -Registry system source

  -Configure entities accounting source

  -Initialize the source system

  -Target registry system

  -Create the import format (Fusion of application HTP) that corresponds to the account dimension in the target application the COA account segment from the source system.

  -Create the location, connected to the high import format

  -Create the metadata rule

  When I try to run the rule of metadata, it triggers the following error in the step "design EPMA import profile for dimension ERPI system profile 5:

  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  See below the FDM application log:

  2015-03-09 13:04:25, 716 [AIF] DEBUG: CommDim.getRuleInfo - END
  2015-03-09 13:04:25, 717 DEBUG [AIF]: AIFUtil.callOdiServlet - START
  2015-03-09 13:04:25, 941 [AIF] DEBUG: the registry has been found!
  2015-03-09 13:04:26, 006 INFO [AIF]: Services of EPMA Web URL: http://EPM11124V2:19000 / hyperion-bpma-Server
  2015-03-09 13:04:26, 007 [AIF] DEBUG: establishing a session now...
  2015-03-09 13:04:29, 523 INFO [AIF]: the session Id is: fa0ecc96-m-e2ee-f7be-8b8b6d0112d8
  2015-03-09 13:04:31, 305 [AIF] INFO: creation of profile import:
  2015-03-09 13:04:32, ERROR 451 [AIF]: error encountered
  2015-03-09 13:04:32, ERROR 453 [AIF]: error encountered
  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  ---End of inner exception stack trace---)
  2015-03-09 13:04:32, 489 [AIF] DEBUG: AIFUtil.callOdiServlet - END
  2015-03-09 13:04:32, 498 FATAL [AIF]: error in CommDim.loadMetadata
  Traceback (most recent call changed):
  Folder "< string >", line 4185 in loadMetadata
  RuntimeError: java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server could not process the request. ---> System.FormatException: input string is not in the correct format.

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  -End of the exception stack trace internal-

  2015-03-09 13:04:32, 568 FATAL [AIF]: error in the load metadata
  2015-03-09 13:04:32, 641 [AIF] INFO: end process FDMEE, process ID: 201

  I'm new type of debugging using FDMEE, but I am not mistaken, he finds a string where I shouldn't be finding a string somewhere in the metadata? I looked in the source system metadata, but I see not all metadata 'string. ' Could someone maybe advise and point me in the right direction on how to handle this error (which causes the error, where to look, etc.). Any help would be appreciated kindly!

  Kind regards

  Gerard

  Hello

  Looks like you might need to work on ensuring that FDMEE can talk to EPMA.

  Also take a look at the following doc:

  FDMEE: Export of metadata for EPMA fails (Doc ID 1633771.1)

• Additional code added when you paste the table from Word in Dreamweaver

  Hello world

  I stuck in a table from Word in Dreamweaver and even if all the table code was written, Dreamweaver put < p > tags around all the content of the data cell and he also added valign = "top".

  Is it possible to get just Dreamweaver to create the base table code and do not add any extra markup?

  Appreciate any advice.

  I just tested this and had the same results, regardless of the option I used when using 'paste special '.

  Outside the coding table yourself and adding data, it didn't there has anything you can do on the entry formatting of MS Word.

  If you insert the code in the table in a new document, maybe run a search and replace to remove the valign = top of all cells.  Regarding the

  Tags, you could do the same, find and replace each of the tags separately (but this should be done in a new document that has this particular table), otherwise I don't worry too much about those, maybe just set padding and margin on the

  elements to 0 or all that is appropriate, within this particular table.

  Once you have the code as you like, then copy and paste into your web page document.

  Just an idea anyway

• I get the error code 80070005 when you click the Windows Automatic Update button.

  Basically, the title says it all. When you click on the button to auto update error code 80070005 arrives. What should I do?

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

• The XML parser error when you set the NTP in UCS Server

  When you try to configure NTP servers (using IP addresses) when http would be in UCS C220 servers, received an XML parser error and NTP server configuration did not.  Ideas?

  Hey John,

  You can set the NTP CLI/SSH servers to host?

  -Wes

• Setting internal ID when you create the master/working repository

  I came across a large number of documents requesting to set the different internal id for each repository, while creating. But during installation / creating repository time ODI client didn't ask me to create an identifier internal. It automatically assigns him.

  To change the internal id after the creation of repository, you can renumber it. But it is also a risky process. SO, please tell me if there is a way to create IDs internal during the installation of the ODI client or when the repository was created.

  Hi HS,.

  Thanks for your reply. I wanted to know why it does not define an internal id when creating the repository for the first time. If it's not us to put in place the internal id first and ask to put in place after the creation of the repository, which seems to carry some risks, do yo think that it is a bug in the application.

  Thank you

  Sayed

• Database objects is EMPTY when you create the Entity object

  Hello!

  I am very new to JDeveloper/OAF, I'm an online example how to create an entity object. When I right click, new entity object, the objects of database is EMPTY, I expect that my tables will be listed here. I have already created a database connection and tested it successfully. When creating the new workspace, I defined the DBC file, my name of user and password, the abbreviated name of the application and the keys, I also defined a new package. What else is that I'm missing? I saw when the definition of a new package, it suggests a format particular as name.oracle.apps.component.subcomponent.webui, it has something to do with my problem? Is this format that is posted somewhere? Why do I get a blank list?

  Thank you.

  Jon

  Solved. I just replaced with the version you originally downloaded .dbc files. I remember that I took off the APPS_JDBC_URL line (following a statement online for a problem I encountered earlier). No doubt this has solved the problem.

• InDesign CC closes unexpectedly when you create the new document

  Hi, my CC Indesign closes unexpectedly whenever I try to create a new document.

  Also, it closes when I use the plugin Blurb Indesign, to create the new document or for download from my books - during the pre-flight, she leaves.
  

  I've updated to CC2015. I also re-installed the plugin blurb. These two measures do not seem to work.

  • The InDesign file in the cache folder, delete.
  • In the preferences/Adobe InDesign / Version 11.0/en_US (or any language folder you see there), locate the InDesign Defaults file and place it on your desktop (this way you can always copy it back if necessary). If there is a file, InDesign SavedData offers also the office.
  • Restart InDesign after doing that, fingers crossed it will launch.
  • If you are satisfied with the result and don't need your InDesign preferences previous folder (InDesign Defaults), then delete the two files to the desktop computer. I usually keep a copy of them just in case ;-) But 99% of the time that I do not put them back, as clearing caches and prefs seems very often cure the problems.

• CS6 Illiustrator crashes when you create the new file

  Hello.

  I'm using windows 7 x 64. And I installed the two Illiustrators x 64 and x 32. I open the Illiustrator but when I try to create the new file Illiustrator stop working.

  Windows 7 Hompe premium x 64

  processor i3 4x2.93

  RAM: 4 GB

  network with printers

  

  error reaport

  

  Hi Philippe,.

  We are really sorry for all the inconveniences that made you.

  Try the following steps to check the issue.

  1 try resetting preferences

  Press Ctrl-Alt-Shift on PC as soon as you click on the Illustratir icon to reset the preferences to the default settings.

  2. If this help not try to remove all printers from the system one & check.

  3. in addition, you can try to set the boot system & check if still HAVE plant if you try to create a file.

  At the same time if these steps does not resolve your problems you can contact Adobe support by following the link below:

  http://helpx.Adobe.com/contact/

  Thank you

  Florian

• Is there anyway to customize the screen to "play" when you create the project responsive for Tablet and mobile?

  Hello

  I was wondering if there is an easy way to customize the screen button "play". Currently, when the project is considered on the mobile, it displays the button on the large central room with the gesture icon in the upper right. Essentially my client do not like this, and although they don't have a landing page before moving in the course, they would prefer the page to be better integrated in the style of running. Basically, I want to put this page in a title page that shows a picture of background rather than having a white background all.

  I had a glance through the preferences and settings and have failed to find anything, so I thought I'd come and ask here see if someone else has done something similar before you start messing around with the release of HTML5.

  Any ideas or solutions would be very welcome!

  Thank you

  K

  Publish fewer setting/start and end, if you deselect the AutoPlay option, you can navigate to a picture that you want to use.

• Error during communication with the remote host when you create the new virtual machine

  I'm under 7 ESX servers on IBM Blade H22 there is a mistake to invite while I create a new virtual machine

  on the vcenter Server

  At the end of 30-35 minutes, it gives an error

  "Error during communication with the remote host"

  The existing machines are working well... I tried to create virtual machines to other ESX servers as well

  but the same question. I also tried to make the clone of existing machines, but without success

  Can anyone help?

  You rescan the LUNS once?

  You've restarted the management agent?

  You've restarted the vpxa?

  If this isn't the case, please perform the step above and check out them.

• With JNDI error when you create a new data source

  Hello:
  
  This weekend, when adding new applications in the production environment, we had a problem where the new managed servers JNDI tree was inaccessible.
  
  We have seen the error message was:
  
  ####
  < 1364066840022 > < BEA-149231 > < cannot create the activation state to true for the application "EOI".
  weblogic.application.ModuleException:
  at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:349)
  at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.next(DeploymentCallbackFlow.java:411)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:635)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
  at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doPrepare(DeploymentAdapter.java:42)
  at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
  to weblogic.management.deploy.internal.AppTransition$ 1.transitionApp(AppTransition.java:21)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
  at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  weblogic.common.ResourceException: is already bound
  at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:387)
  at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
  at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
  at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:346)
  at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.next(DeploymentCallbackFlow.java:411)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:635)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
  at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doPrepare(DeploymentAdapter.java:42)
  at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
  to weblogic.management.deploy.internal.AppTransition$ 1.transitionApp(AppTransition.java:21)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
  at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  
  We traced the issue to a new data source that has been added were we found that along with the entry of jndi name expected in the jdbc xml file, there were two empty entries:
  
  < jndi name - > weblogic.jdbc.DataSource.EOI < / jndi-name >
  < jndi name - > < / jndi-name >
  < jndi name - > < / jndi-name >
  
  
  The data source has been removed, consoles restarted, the re-created data source and the problem happened again. To get through the issue, had to manually remove empty tags in the xml file.
  
  We have created 2 new sources of data, and it happened only on the spot. The same data source each time. In addition, this question moved not when these changes have been made in our regions of bass (development, qa).
  
  The version is the same in all three regions.
  
  WebLogic Version:
  WebLogic Server temporary fix for 9324911 Wed Feb 03 22:38:01 PST 2010
  WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
  
  
  Is this a known issue? And if so, is there a way to avoid it, other than to start checking the newly created XML files permanently?
  
  Thank you
  
  Ted

  Yes, it's a common problem documented in the Oracle documentation:
  WebLogic Server: Get ' weblogic.common.ResourceException: is already bound ' exception with name JDBC JNDI (Doc ID 1154250.1)

  The only solution is to remove the empty value entries.

  Bravo!
  AJ