Node Manager warning - need help

Similar Questions

• DISK MANAGMENT I NEED HELP

  I wanted to delete some files to my sd card. Deletion was not available because the files have been write protected. This is what I found and need help; This sd card in my computer as drive H: properties show that the - STORAGE THAWED and the FILE SYSTEM - TYPE FAT32. First of all, I tried to restore the site, it did not work because the disk is write protected. I have unlocked next to sd Card reader and tried again. This did not help. I then looked at disk management and removable disk 1 3.6 GB read-only (h :)) Primary Partition.)

  I don't know how it happened and I want to be able to use the sd card, so I need help please.

  The card SD gives the same error if inserted in another computer? The manufacturer of the card provides a utility to try to wipe/format cards capricious?  The type of error that you describe usually happens when a card is defective or failed and usually nothing you can do will remedy the situation.

  writing in the new message: * e-mail address is removed from the privacy... *

  I wanted to delete some files to my sd card. Deletion was not available because the files have been write protected. This is what I found and need help; This sd card in my computer as drive H: properties show that the - STORAGE THAWED and the FILE SYSTEM - TYPE FAT32. First of all, I tried to restore the site, it did not work because the disk is write protected. I have unlocked next to sd Card reader and tried again. This did not help. I then looked at disk management and removable disk 1 3.6 GB read-only (h :)) Primary Partition.)

  I don't know how it happened and I want to be able to use the sd card, so I need help please.

• Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, he

  Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy ecc ecc. Tried all that but I'm stuck. any help, please? Thank you.

  Hello

  Please try following steps depending on your operating system

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old and delete the folder Adobe application manager

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

  (MAC)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

• Need help with my Y40-80? power management

  I get message to the center of the Action as follows:

  Compatibility problem between your power management system and Windows

  Your power management system is not compatible with this version of Windows.

  The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

  Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

  Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon

• Can manage Windows XP Home Edition of Windows 8? Get the error codes for the security updates (0 x 643). ALL through Microsoft Tech INFECTED with the virus and Trojans tried. I need help BADLY. Thank you.

  I tried every thing blessed with technology microsoft... always hanging in limbo here.  Tired of doing constant comprehensive analyses, etc. in order to remove the constant threats.  Apparently my McAfee can't stay with her either.  Need help with the download/repair these seeds as soon as possible.  Thanks to all those who wish to help me - it would be that popular, for sure!

  The question makes no sense.

  "Can manage Windows XP Home Edition of Windows 8?"

  Two problems: there is no Windows 8 and even if there were, Windows XP Home Edition would not not 'manage '.  ;-)

  I drop McAfee for a few different freeware products.  Or better yet I'd get two products 'cost' (~ 25 and 60 dollars) and install them and use them in the future - but WHEN you are trying to clean up.

  You seem like you maybe sincerely - at a time when a format/install of Windows XP/patching/installation of applications/patch/restore backups of your data is the best course of action.

  However, if you are willing to work - maybe we can at least get things cleaned up to a certain point where you can get a good backup before doing this (otherwise avoid doing all together.)

  In the order shown, do not jump (no matter what you do, what you have done in the past, etc.) ...

  First of all - download, install, operate and put to update and then run a full system scan with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Search online with eSet Online Scanner.

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now try usig the Fixit (Yes - try to use it again) to reset your Windows Components Update (you'll do the aggressive version, not the other):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Now, open Internet Explorer, visit http://windowsupdate.microsoft.com/ and do a CUSTOM search for updates.  Install any critical/high-priority ones and - for now - to ignore all those in option (always do this for material updates optional here.)

  Restart if necessary and continue to visit this web page until you have not yet updated to high priority.

  Now - if your problem is with the facilities of the .NET Framework...  You can end up with something like:
  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  to uninstall a few versions of the .NET Framework, then you can try to install again - but you should not do this until the machine is supposed to be cleaned.

• Warning for Vista: Diagnosis, event id #407 and Vista error: Diagnostics, event #402, need help to solve

  I need help to solve the following issues:

  Warning in the event log: Source diagnosis, event id #407, error #407, 402 # and #408.

  Thank you!

  Julie

  Hello

  1 have had any changes made on the computer before the show?

  2. what exactly is the problem that you are facing on the computer?

  3. What is the full and exact error message?

  4. do you have problems of performance on the computer?

  Method 1:

  Check the link and see if it helps:

  "Error, warning, or critical" events are recorded in the computer a Windows Vista-based Diagnostic Performance/Operational event log

  http://support.Microsoft.com/kb/942910

  See also:

  http://TechNet.Microsoft.com/en-us/library/cc733455 (WS.10) .aspx

  Method 2:

  Check out the links and check if that helps:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Hello, I need help.  in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Hello, I need help. in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Policies automatically goes to "off" If you have your screen as working RGB profile - what is something that you should never do. Always have a standard space like RGB work.

  And Yes, "preserve embedded profiles" is the only sensitive parameter. Others are best for special purposes where you really know what you are doing - at worst they will transform your archive in a unrecoverable mess.

  

• Hello. I warned to creative cloud, but not what I was looking for. I want to cancel, but I can't find where I can do.  I need help please. Thank you

  Hello. I warned to creative cloud, but not what I was looking for. I want to cancel, but I can't find where I can do. I need help please. Thank you

  Hello

  Please see: -.

  In order to cancel the order, please contact customer service

  You can check: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• Need help with NetImageTracker/Manager

  Hi all

  I need help to understand how NetImageTracker works. What I want to achieve is to download the images into listview, but I'm trying to use it directly from C++. What I have right now is declaring a new ImageTracker Net and then I use the function imageSource, but for some reason I can't pass my url in there.

  So I have

  NetImageTracker* nit = new NetImageTracker();
  
  nit->setImageSource(QUrl(feed.value("url")));
  

  but I don't think that the way it was suppose to work. the feed.value ("url") is a json file I upload to the web

  Thank you for the help

  You will need create a NetImageManager instance which will use all the NetImageTrackers:

  To all:

  NetImageManager * manager_;

  In the constructor:

  manager_ = new NetImageManager (this);

  When to create ImageTrackers also put their parents so they will be automatically destroyed as well as parent:

  NetImageTracker * nit = new NetImageTracker (this);
  or
  NetImageTracker * nit = new NetImageTracker (manager_); If you want to define manager_ as parent

  Configure ImageTrackers with instance of NetImageManager:

  nit-> setManager (manager_);

  Set the URL of the image to load: (use setSource, not setImageSource because it contains the result)

  nit-> setSource (QUrl (urlString));

  Connect to the imageSourceChanged signal and when it starts to get the URL of the uploaded image.

  In the signal handler:

  NetImageTracker * Tracker = (NetImageTracker *) sender();

  QString urlStr = Tracker-> getImageSource();

  QUrl url = QUrl (urlStr);

  This url can be used in ImageView

  Tracker-> deleteLater(); possibly destroy NewImageTracker because it is no longer necessary

• Need help to customize the correspondence management

  Hello

  Could someone provide me with some documents or reference links that will be useful to customize the management of correspondence in the ES4?

  Thank you very much!!

  Hello

  CM Developer's Guide may be designated for the customization of the correspondence management

  http://help.Adobe.com/en_US/LiveCycle/11.0/CorrespondenceManagementDeveloper/WS3ad6fd7a5b4 1dea4-3be0a31d1309f787f4e - 8000.2.html

  Santosh-

• I have 2 problems-how can I activate my Add ons and how to uninstall Windows Anti Virus. I need help, please.

  I have Windows XP 32-bit with IE8 Add ons.  I mainly use Firefox Mozilla for my browser and Yahoo as my home page.  Anyway, I have tried all the support and help guide and technicians told me to do to get add ons to open and activate but in vain.  This computer was given to me as a profession, and it was used in a Bank, so I think that the system administrator has disabled the add ons.  I myself as an administrator and use the tips and tricks given windows and Microsoft, but I always run up a wall.  I need help, please.
  I also need to know how to uninstall Windows antivirus software.  I can't find anywhere on my computer.  I feel really stupid and he is probably right in front of my face, but I can't find it to uninstall.  I have McAfee that I paid dearly for if I want to use it until it expires.

  This "Microsoft antivirus' witness (AKA Trojan W32/FakeAlert) hijackware infection!

  If you manage to somehow move to Win7, you will always have an infected computer.

  The ONLY way to solve the problem is by formatting the current hard drive and do a clean installation of Windows, whether it is WinXP or Win7.

  The ONLY way you can do a clean install of Windows XP if you have disks that came with the computer or if by chance, there is a hidden partition restore (not to be confused with the system restore).

  If your kids er - well & their spouses are going to spend money on a new HARD drive, they'be be better spend on a low-end Windows 7 computer and brand-new (for example, a netbook or a mini).

  NB: Any data on your Windows XP computer must be considered 100% reliable! (This includes all of your usernames and passwords, for example, those used for online banking, etc.) You do NOT want to put ALL the data from Windows XP to a new computer or HARD disk.

  Good luck, Grandma. Hope that your grandchildren will treat you better than their parents.

  PS: Time wounds all heels.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• need help with windows vista

  I need help, 1 there is an error code 10 on Teredo Tunneling Pseudo-Interface, it indicates that the driver is unable to start. I click on find the solutions button but nothing happens. When I click on the button to update the driver it says it is already up to date. It cannot roll back the driver while he was working properly.

  2nd, Windows Firewall cannot be turned there an error 0x6D9 code and it tells me still the firewall of windows with Security Advanced snap-in failed to load. It allows me to change anything.

  3rd my computer cannot access the internet, it says it cannot detect a connection even if it is connected directly to the modem, in addition, a message indicates the dependency service or group was able to start.

  When I run a diagnostic and repair the check it tells me that the DHCP is not running on my computer. I unplugged my modem and plugged back there and still no Internet. This is a result of the issue of Teredo Tunneling pseudo-interface or it is a separate issue

  Hello

  Question: Error code 10 on Teredo Tunneling pseudo-interface.

  Teredo is a tunneling protocol designed independent platform to provide IPv6 (Internet Protocol version 6) connectivity to nodes that are in IPv4 networks. Compared to other similar protocols its particularity is that it is able to fulfil its function even behind network address translation (NAT) devices.

  The Code 10 error code is generated when the Device Manager does not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Check the steps from the link below and see if the error code 10 disappears.

  http://support.Microsoft.com/kb/943104

  Question: Error 0x6D9 when it turns on the Windows Firewall

  Run the Fixit from the link below and see if Windows Firewall can be started or not.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic

  Question: Cannot access the Internet

  What browser do you use to access the Internet?

  Perform the steps from the link below and see if you can access the Internet.

  http://support.Microsoft.com/kb/937151

  Answer please if you have any questions.

• My computer says ACCESS DENIED when you try to put the values by defect of security + Itunes glitch thing? I need help?

  My computer is says ACCESS DENIED

  When I tried to do: http://support.microsoft.com/kb/313222/en-us

  This is the error I got! : (Sorry, really long).
  Monday, September 6, 2010 11:45:33
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-1141220282-763679081-1401190266-501.
  Configure S-1-5-32-555.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.

  Group membership configuration was completed successfully.

  -Configure the 64-bit registry keys...
  Configure users\.default.
  Configure machine\software.
  Configure machine\software\classes.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aa of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aax of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\ of construction. AMR.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.bwf of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.cel of construction.
  achine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied. (says this error ABOUT 1 000 times, I had to delete if it is not published on long!)
  Error setting security on machine\software\classes.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\classes\Wow6432Node.

  Configuration of registry keys was completed by one or more errors.

  -Configure the 32-bit registry keys...
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\wbem\mof.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.
  Configure c:\windows\syswow64\export.
  WARNING 2: The system cannot find the specified file.
  Error setting security on c:\windows\syswow64\export.
  Configure c:\windows\syswow64\ias.
  Configure c:\windows\syswow64\wbem.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\cachedlogonscount machine.
  Set up the nt\currentversion\winlogon\forceunlocklogon machine.
  Set up the nt\currentversion\winlogon\passwordexpirywarning machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\limitblankpassworduse.
  Configure machine\system\currentcontrolset\control\lsa\lmcompatibilitylevel.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminclientsec.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminserversec.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionpipes.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\disablepasswordchange.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\maximumpasswordage.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requiresignorseal.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requirestrongkey.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\sealsecurechannel.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\signsecurechannel.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  When I tried to solve this problem: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/9d71a399-d168-43ec-8083-673f5258d09c?ppud=4

  I can't back up my files anywhere that it says access denied :(
  

  Also, WHENEVER I open itunes windows must reconfigure and change all my default settings but my music is still there! It says itunes reconfiguration and it still load and say that is is to install itunes?

  I really need help please

  Hi mewlar101,

  You run the computer as an administrator?

  Step 1: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Now, check if you can back up your files

  Step 2: Check with another profile for the Admin user

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  On your problem of ITunes, you can post your query on the discussion group by Apple for more specialized help

  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Node Manager command 'CALL' failed done Oracle 12 c

  Hi all

  I started the servers like this

  (1) node manager started. Running successfully

  (2) logical web Admin Server started. Running successfully

  (3) Wls_forms server started. Running successfully

  (4) Wls_Reports server started. Running successfully

  (5) http Server. ohs1 running successfully

  After I began namingservice.bat 14021-> the appointment service has started successfully.

  But when I start the server reports-> startComponent.cmd rep_wls_reports <-my name of report server started successfully.

  Status is displayed in the Console of Node Manager rep_wls_reports now works.

  But after awhile, he launched the warning

  < WARNING > < order Node Manager 'INVOCATION' unexpected failure due to: [Plugin not found for the 'ReportsServerComponent' system component type, type of plugin "METRICS"].

  Please check Node Manager log or journal of the server for detailed information. >

  Please provide the solution? How do I solve this problem

  Thanks to everyone who helped me.

  My problem has been resolved I have reinstall java, weblogic, and forms 12 c my problem has been resolved.