Warning for Vista: Diagnosis, event id #407 and Vista error: Diagnostics, event #402, need help to solve

Similar Questions

• I have no product key for my windows vista... I need help... pleaze!

  
  

  I have no product key for my windows vista... I need help... pleaze!

  If Windows Vista is already installed on your system and your system still works (even if only in safe mode) so you can be lucky.  There is a product called Belarc Advisor: http://www.belarc.com/free_download.html which can be installed on your system and can retrieve the product key in the system files (only Vista does not provide this feature).

  If you can not enter your system, it has already been formatted or something like that, there is very little that can be done.  There is no place that keeps a record of the product keys related to individuals (or computers) that can be checked and Microsoft will not give without proof of purchase product keys (which IS the key product - the sales receipt or even the disc itself is not enough).  You can't even borrow a disk from someone else because you need your product key to activate the program.  The only choice is to buy another product (you'll probably need a commercial full version as an upgrade will not work on a non-production system or one where you cannot install a product allowing to level).

  You can TRY to get Microsoft to activate your system without a product key if you have the disk (there are codes on the disc, which mean it is valid or not), but I doubt it will work but may be worth a try.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain that you have lost your product key, but the disc and it's the same PC.  They can give you a code to enter on this screen to activate Vista (or they have very probably you will say you are out of luck and they can not help you).

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem. __

  I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem.

  Hello jabeena, welcome.

  This section would apply in fact to the Windows Live programs, but we'll see what we can do to help out you.

  I recommend to try this first:

  1. disable any antivirus software or security, you have running on your computer. Looking for software to disable that contains a firewall.

  2. click on START
  3. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  4 type the following and press enter

  Regsvr32 softpub.dll wintrust.dll initpki.dll

  5. then type the following command and press enter

  netsh winsock reset

  6. restart your computer and see what happens.

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Unable to get security updates and a critical update for Vista (KB2541763), to support for Vista. (error 80070005)

  original title: failed to get the security updates and critical update for Vista (KB2541763), to load for Vista

  All the other updates, including security, for other Microsoft software will open (WIndows Explorer, Microsoft Office, etc.).
  This seems to have started after downloading and installing McAfee on 6/17. Updates have been well before that date.
  Service Pack 3 is installed.
  All updates important/critical loading fine up until this date.  I have 11 updates essential and important to load.
  I totally removed McAfee from the PC, including the stage you purchase from McAfee for cleaning the system. Now run the ESET security suite.

  Hi Dan,.

  Thanks for posting your question in the Microsoft answers Forum. Follow the troubleshooting steps in this thread for your problem with the 80070005 error. Alternatively, you can try to install the update in small groups to see if that fixes the problem.

• Try to install SP2 for Vista: error 8024200B.

  Code 8024200B

  Try to install sp2 more than once now.  I get the error 'Code 8024200 B '.  I can't find a solution for this anywhere.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Trying to create the recovery for Vista, error message disk on scriptlibrary.dat

  try to create a recovery disc for vista, cannot that a window pops up with the following.

  ScriptLibrary.dat

  cannot be varified for digital certificates, automation server can't create object

  Help, please

  Hi Michael,

  You're talking about recovery disk from the manufacturer created from the computer recovery partitiion or are you talking about a generic recovery for repairs disk (making it impossible to reinstall the operating system)?

  If the recovery disk from the manufacturer, please contact technical support from the manufacturer for assistance that the process of creating a disk of the partition recovery is their process and not Microsoft and varies by manufacturer and sometimes even my computer within this manufacturer model.  We do not know how to deal with each type or how to handle a problem such as you experience with this process - even if we knew that the manufacturer make and model specific to computer which you did not (but with which we might be able to provide specific links to the manufacturer).

  If you mean a recovery for the repair disk, then try using the following to do an and see if it works any better than any method that you use: http://www.vistax64.com/tutorials/141820-create-recovery-disc.html.

  I hope this helps.

  Good luck!

• When I insert my apple ID for FaceTime then show these words (and n error occurred during results. Try again)

  Dear I have a problem in my FaceTime for the e-mail address, of FaceTime also work on cell phone, when I insert my apple for FaceTime ID then show these words (and n error occurred during results. (Try again). Please help me and tell me what is a problem. Thank you

  < re-titled by host >

  See if it might help - If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Process of recovery and verification with hotmail - account desperately need help!

  I tried for days to get my work without response email address.  What can I do?  I'm desperate to have my restored account!  I use this account for my work and will lose my job if I can't meet my clients!

  I just didn't know my caps lock was on and has been locked.  The verification message had ceased to exist (is no longer in use), so I had to complete a series of questions to someone to check my authenticity on the account.  But no one is answering my questions forum and nobody has solved my two climbs of pine (I have two numbers).

  What can I do to up?  I really need help!

  E-mail * address email is removed from the privacy * and PIN # 86882209 and PIN # 33804480

  Thanks for any help!

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• cannot pair look on the phone was very good and makes everything I don't need help

  my Apple Watch re - will pair not to my iPhone 5 c was fine and just went off I tried everything I know manual I tried but only to give me 5 digits and he needs 6

  I've been trying since 08:00 this morning no chance need help, my watch is 7months old exploded b4 but matched ok.

  Hi, Dorothy

  When pairing manually, you need to tap your iPhone when it shows the name of the device (which includes a five-digit code) on your watch:

  

  Your watch then displays a six-digit code, you will then enter on your iPhone:

  

  More information:

  Set up your Apple Watch - Apple Support

• Vista - cannot install updates for Vista, error codes: 66A and 80070645

  I tried to download and install the update to Windows Update (KB979906), (KB959209) x 86 (KB963707), but I get these Error Messages 66A and 80070645.

  I tried to download them and install them individually.

  Hi Ajay

  THX.

  Not quite right, but use a fixer of framework and re-installed the frame individually. Now, the automatic update works again.

  Ergjam.

• Adobe error 1635 installs on vista laptop I tried Defender pro 15 need help im not that computer and adobe installs always ewrror 1635 need help

  any solution easy errror 1635 vista will not download adobe

  Hello
  
  I found this error on the adobe Web site, so I suggest to try the steps in the link below and check if it helps.
  
  http://kb2.Adobe.com/CPS/400/kb400924.html
  
  I also see that there are some registry settings, you must run on the computer.
  
  Registry warning:
   
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  How to back up and restore the registry in Windows:
  
  http://support.Microsoft.com/kb/322756
   

• Error installing SP2 for Vista (error 80070026)

  Hello

  I can't install the Vista SP2 in my dell. Whenever I try, I get the error 80070026 (on the Windows Update site); same problem when I download KB948465 directly.
  I already install Windows Cleanup Tool: no improvement.

  Information:
  Dell XPS 630i
  Vista Home Premium SP1

  Hello garavato,

  Thank you for using the Microsoft Windows Vista Forums.

  Have you tried to temporarily disable the real-time protection of your applications, anti-virus and anti-spyware (for example, CounterSpy, Spysweeper, Tea Timer of Spybot, AVG Anti-Spyware) and/or any third-party firewall (e.g., ZA) before installing the updates. If you disable the third-party firewall, make sure that you enable the Windows Firewall?

  I added a link to another Forum Microsoft where to get the same error using Windows Update code.  Please let us know status.  Thank you!

  Help with Windows Update error 80070026
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c00f0ccc-4214-4249-9efa-f5e07aae9e04
  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• FAILURE TO INSTALL UPDATES FOR VISTA ERROR - MS SERVICE PACK 4 - 663

  I'M USING THE VISTA OPERATING SYSTEM - CAN NOT INSTALL MICROSOFT SUITE SERVICE PACK4 - ONLY GIVE 663 ERROR MESSAGE - THE PROBLEM WAS APPEARING FOR ABOUT A MONTH NOW AND HAS DETERIATED THE COMPUTER PERFORMANCE - A TI BOTHERS ME A LOT

  Hi Helen,

  Your question that about installing SQL Service Pack 4 would be best handled by experts in the Forums Pro Windows Vista IT please post your question here .

• Cannot install Service Pack 1 for Vista - error 0 x 80073712

  Hello

  I don't know what im do please understand me if you can.

  OK I'm dave and tried to download Windiws Vista SP1, because it is not in my Windows updates.
  When I tried to do I have so many things, but after the download, then when he goes to confirm, the number 0 80073712 x.

  I've got intouch with Microsoft and they took my cell phone and tried to do what they can, but in the end told me to get intouch with Toshiba that I have corrupted files.

  So if anyone can help me I would be very gratefull thanks.

  Hello

  Microsoft said that your files are corrupt? Well, bad news. I think that you need to reinstall Windows Vista again and then will be updated to SP1

  By the way; Why you n t want to automatically do the update to Vista?
  It s much saver and I think that much easier and you are always up to date.

  Good bye