Noisy CPU cooler

Similar Questions

• Satellite A200 - stop the CPU cooling fan

  Hello

  I got a Satellite A200-1CK and stop my CPU cooling fan. Not that my CPU is not getting enough cooling. But when I use my laptop to school for use for OS virtualization, it heats up, and the cooler will not turn.

  The CPU cooler is broken or is it just a setting in the bios?

  Greetz,
  Dion

  Hello

  You must understand that nobody does you any kind of diagnostic accuracy and if you want to have the correct answer, your laptop must be checked by a technician.

  Please check the BIOS settings, but on my A200 I can t see anything that can help.

• Satellite 1800-514 - CPU cooling fan

  My Satellite S1800-514 has now more than seven years. I never had any problems with it. But I'm a little worried now the CPU cooling fan. Basically it runs continuously since I bought the laptop.

  I'm a guy of 'maintenance' of a man "fixing after the failure." On the other side, there is truth in "Do not open a market system".

  Should I replace or let you replace the fan (cost?; risk?) after 7 years of non-stop work or wait that the failure?
  Should I open the notebook and clean the fan and air conditioner?

  Anyone here with experience?
  Thank you

  You are absolutely right with him "never touch a running system" ;)
  And if you encounter any problem until now, let it well.

  But what you could do is, clean the fan and cooling of the modules with a sort of a jet of compressed air to get rid of the dust.

  Try this and good luck with your laptop. Seems to be a pretty strong and durable unit.

• HP pavilion c 550-047: How can I remove my stock CPU cooler?

  Im looking to add new thermal paste and replace the old one but don't know how to remove the stock CPU cooler.

  The CPU cooler is called Cooler Master 644724-001.

  Hello @rileyd2,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the matter of the CPU and wanted to help you!  I understand that you are looking for instructions on removing the CPU fan.

  Try to review the following resources and let me know if the information is useful:

  How to remove a computer processor fan

  How to install a new CPU cooler - step by step

  (They are not HP support websites).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HPE - 590t: Suggestions for replacement CPU Cooler & case fan

  Hi all

  I would like to replace the fan in my HPE - 590 t.  Recently, he made loud noises and yesterday it sounded like a car was at my house with the idling of the maximum RPM.

  I know that some have recommended the Coolermaster Hyper 212 EVO in previous threads, however I have some concerns regarding this cooler would fit in my case, as it seems that I have about 1.5 inches of space to the left of the cooler and about 1' of headroom above the stock cooler.

  Here are the specs for my motherboard.

  I have a case of average size, I would be grateful any recommendation for the appropriate CPU cooler.

  Ideally, I'd like something that could last another two years and be as quiet as possible.

  HP DV9310 Windows 7 Professional 4 GB RAM
  
  DV7t-6100 Windows 7 Pro 8 GB RAM
  

  Ruette,

  I wanted to let you know that you were right about the question of the back plate on the motherboard.   I decided to order the aftermarket cooler that I mentioned, and when I went to install it, it appeared to be welded directly on the motherboard.  I was puzzled because I've never seen such a design.

  Because I could not remove the back plate, I couldn't install the new heatsink.

  Being faced with the choice of either ordering a heat sink used as you have suggested to the origin or the HP part since the website claiming to sell the stock heatsink heat, I decided to remove my HP Elite system and build a custom system.

  I built a new system with a motherboard MSI Gaming 5 and 4790 k i7 processor and used the ram, power supply, SSD, GTX 750 ti and other components in my system HP Elite for my new build. All these elements I just mentioned were anyway under a year of age.  Of course, I had to spend money on a Windows 7 operating system at retail, but also a new case, but overall it was worth the money. I also think that in the end I started to the cultivate my HP and it was just time for me to upgrade.  Now, that I'll stay with custom desktops built and stay away with OEM computers due to the unusual limitations that the OEM wants to place on their systems.

  Thanks again for all your help!

• H8-1214: upgrade of the H8-1214 cpu cooler

  I'm trying to upgrade the processor 6100 fx to fx-8150, but I'm having a devil of a time finding a CPU cooler that fits the card mother angelica. what most people don't understand, is that the card mother angelica uses am3 + socket mount Intel cpu cooler. Anyone know or recommend a CPU cooler that will handle 125W cpu, go in the small space, not cause problems with editing? I already have that tower coolers match or working, because of the large part using PINs instead of screws, mount the cpu because is screw in and most of the towers are high.

  I used the same CPU cooler on the fx-8150 and he ran very well because it was not overclocked.

• Pavilion dv6 1370 ev: Pavilion dv6 1370ev CPU cooling fan

  So I have a problem with my CPU cooling fan, I asked in a center of HP cirtified Alexandria-Egypt (Egypt MAS), but they said that HP company no longer produces spare parts for this edition.

  Any idea where I can get a new one from a reliable source?

  Here is the Service Manual:

  Manual

  This is the part you need:

  For use only with the computer models equipped with ATI Mobility Radeon HD4650 graphics subsystems
  518435 001

  eBay Italy; seller of boats in the world of Hong Kong

  http://www.eBay.com/ITM/CPU-cooling-fan-with-heatsink-for-HP-DV6-Intel-fan-518435-001-/120945738710?PT=LH_DefaultDomain_0&hash=item1c28ed83d6#shpCntId

  If it's 'the Answer' please click on 'Accept as Solution' to help others find

• Pavilion P6240F: HP Pavilion p6240f Cpu Cooler

  I have a HP Pavilion P6240F.  The two screws for the broken cpu fan and now when I turn on the computer, it makes a rattling noise.  I need to know what the original CPU cooler with heat sink, or one that matches it.

  What is actually broken?  The plastic guard mounted fan? The fairing plastic? The shroud has also 4 screws.

  Fan attaches to the plastic fairing with 4 screws. The shroud bolts to the bottom of the metal heatsink to the motherboard. Between the radiator and the actual motherboard is the processor.  A thin layer of thermal grease combines the heatsink and processor.

  The set is part # 5187-8413. It may be google.

• Replacement for HP Pavilion DV3 4170ee CPU Cooling Fan

  Hello

  I have a HP Pavilion DV3 4170EE model laptop and in recent days his having problem with the processor cooling fan. And I'm looking for the replacement/compatiable for the same product. I used Partsurfer of HP and the result is nothing demonstrating that product model is wrong and used the serial number and the result is the same.

  Is there someone who can help me find the CPU cooling fan replacement?

  monsoor wrote:
  

  Hello

  I have a HP Pavilion DV3 4170EE model laptop and in recent days his having problem with the processor cooling fan. And I'm looking for the replacement/compatiable for the same product. I used Partsurfer of HP and the result is nothing demonstrating that product model is wrong and used the serial number and the result is the same.

  Is there someone who can help me find the CPU cooling fan replacement?

  Hello

  Through 18, 65 Page in the operating instructions of your laptop

  It's your card

  You want-

  Heat sink (includes the thermal material replacement): 601336-001  

  HP PartSurfer

  EBay

  Concerning

  Visruth

• Compaq Presario model SR5710F hangs / freezes when cpu cooling fan goes into high gear

  Compaq Presario SR5710F with CPU-AMD Athlon X 2 4450e dual core micro - after the Bureau served for a little while, I hear the cpu cooling fan switch into a higher gear. As soon as the fan changes speed, the PC crashes. Power/turn off is only an option to recover. A preliminary inspection did not reveal any significant accumulation of dust or debris around fan or cpu fan. Any suggestions?

  DTCothren,

  Well, I wanted to make sure that leave us nothing out. I think that it is the motherboard.

  Please answer as soon as possible.

  Thank you

• HP Envy Phoenix h9-1333: upgrade CPU Cooler

  Hi all
  So today, I have a problem that drives me crazy. I have a HP Envy Phoenix h9-1333 with a Core i5 3570 processor, 10GB of RAM DDR3, 2 TB Seagate Barracuda (drive C), 16 GB SanDisk SSD caching, and an Asus GeForce GTX 650Ti upgrade. So I went the process of upgrading my CPU cooler to a cooler much more efficient, quieter, then I jumped on the air cooled by the train running and bought a Cooler Master Hyper 212 Evo. The day before, I moved the components of my Phoenix in a NZXT Phantom 410 Mid Tower case. However when I went to install the stand-offs for the cooler I found that the stand offs were too big for the holes in the motherboard. After you create a scene in front of my dogs full of swearing, I put the old ice on and now makes me here. Yes, the Evo of 212 Hyper will fit in the case, I went up to now this question. My problem is that the stand offs do not fit into the holes and another problem that arises is that there is a back plate which is hard at least to my knowledge but I thought I could work but actually I could not. Is that what I can do so that I can't take back the new cooler?

  Hello

  You must have been struck by lightning the issue with your other post.

  HP generally uses screws to the holes in the motherboard to ensure a fit for the heatsink of HP.  Cooler Master may have some suggestions.

  Saw a post here if someone claims that the back plate can be removed. It still leaves you an adjustment problem. I suggest make you a model of the sink top of page area of editing and send to Cooler Master and ask for advice.  The Cooler Master 212 EVO is an industry best rated air cooler.

• AG3-605: CPU cooler for the cpu: which?

  As I am closed for rebuild my AG3-605 with a new motherboard (the same as the damaged), I want to try a new CPU cooler.

  It's not easy to find one. Noctua NH - L12 seems to be one that can fill my reconstruction. But I'm not so geeky that you might believe and confirmation of my choice would be great. It is up to you! And thank you!

  Hi jaclou,

  I am pleased to learn that you have purchased a new MB. Delay was pretty quick.

  I tried to replace my old office by another brand fans.

  Unfortunately, the management of speeds was wrong question so heat. The thermal module or the smart fan is set for fans of the original (speed / voltage / PWM %).

  We have only two options: full or restricted speed.

  For example radiator fan speed: 4200 ~ 4500 rpm and fan speed: 2200 ~ 2500 RPM.

  I tried to manage the different speeds with Speedfan, but after a few days I noticed that the bios was "troubled."

  Well, I ordered original Sunon fans.

  Question:

  You already have a case fan?

• R61i CPU cooling fan

  Where can I find instructions on how to clean or replace the CPU cooling fan. Part #42W2779? Also, if I need to replace where would be the best place to buy from?

  What is the model number R61i? XXXX-xxx?

  The cleaning procedure is very similar to this, use machine oil sewing of WD - 40 and high quality to lubricate the axis of the fan.

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/T60-T61-fan-cleaning-replacement/Ta-p/24...

• With the help of the rocket fish Universal CPU Cooler on a Dell Inspiron 570 motherboard - how do I install it?

  Recently, I upgraded my CPU to x 2, a 4 950 CPU x. The stock of the 4 950 x cooler is not set up.

  The motherboard is a LGA 775, but use and requires screws.

  I bought a rocket fish Universal CPU cooler from bestbuy and the fit is good, but the screws are the problem.

  I want to install this cooler without the use of the replacement of the rear plate of the central unit.

  Then a few names the screws you have to climb?

  Any suggestions?

  Wrong place, my apologies.

• XPS 8700: Upgrade CPU cooler

  Hello

  I have a Dell XPS 8700 and I am facing some problems to find a cooler to replace the original one.

  It came with a modified version in stock intel cooler. Is essentially the same heatsink (not high quality metal) and a 80mm fan (4-pin).

  The problem is that the holes just let me install a chiller that uses screws. I can't put coolers that use this model clip or PIN (as we see in Stock Intel) and I'm afraid to buy new and it cannot install due to the incompatibility of holes in backplate.

  Someone here has already improved the CPU cooler? If someone has already done so, could you please tell me the name of the model of cooler?

  Thank you.

  Here are a few threads.

  This one down a 8700 transplanted in a new folder.

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19587289?pi21953=2

  It is a water cooler on a 8700 with a processor upgrade:

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19648355

  and the other.

  en.Community.Dell.com/.../19625539