H8-1214: upgrade of the H8-1214 cpu cooler

Similar Questions

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• Satellite P100-103: upgrade of the Core 2 Duo processor?

  I bought it is model and I thought to change the processor in a C2D. I just wanted to know if it is possible or not...
  BTW ive seen a P100 with double HD or something I want to know if it is possible with mine or I just read wrong '-_-

  Thanks in advance

  Hi Filipe

  Generally, the upgrade of the CPU is not very easy on laptops and undesirable. In my knowledge Toshiba doesn't supports CPU upgrade and you will lose the warranty if you open Notepad.

  As far as I know the microprocessor used in the Satellite P100 series (Intel Platform) will be different by the model.
  It supports the following processors:

  Intel Core Duo T2300(1.66GHz); T2400(1.83GHz); T2500 (2 GHz); T2600(2.16Gz); T2700(2.33Gz) FSB: 667 MHz

  Intel Core Solo T1400(1.83GHz); T1300(1.66GHz); FSB: 667 MHz

  Intel Celeron-M (Yonah core based) 410; 420; 430; FSB: 533 MHz

  Hope I could bring this matter to light.

  Good bye

• Upgrade of Satellite L30 - 115 CPU

  Hello!

  I want to replace my CPU, but I do not know which processors are supported. I found no information on it.
  Could someone help me?

  Thanks in advance!

  Hello

  Generally, the upgrade of the CPU is not supported. This means that no one can tell if the laptop would be functions properly after the upgrade of CPU.
  The point is that BIOS has not been tested in other processors.
  But I think you could use another CPU, but you must choose one of the same CPU family.

  As far as I know that the laptop was equipped with the Intel CELERON M 380 has CPU
  http://Ark.Intel.com/product.aspx?ID=27146

  In addition it of important what chipset would support the new processor. This means that you should check the chipset and forced to seek support on the Intel page.

• HP Pavilion dv6 6c51ea: upgrade of the dv6 6c51ea ssd and ram wifi card

  Hello
  As of late I thought the upgrade or replace my laptop, but I have a few questions to help me decide.
  First ram cited the speed of the processor is listed as 1066/1333 hz, however I can not check it on the site of hp and the crucial site recommend ddr3 at 1600 hz, the site hp also says is that 8 GB however apparently due to the fact that it was released on Windows 7 However the processor can support 16 GB max memory support and since upgrading to win 10 my system would be doing, is this correct?
  
  What kind of improvements I see by installing an ssd (Samsung evo 850) 500 GB?
  
  And finally the wifi card could be readily available and upgraded to the new ac wifi to use the router to HQ and speeds mon is provides and I pay!
  
  So basically will be the ssd, 2 x 8 GB 1600 mhz sodimm ram, and a wifi amd card equipped for the £300 it cost would he give me the jump in performance for his money as the cpu and gpu are rather dated now (i5 2450 m and radeon 7470 m) when a new system with an i5 4th gen with 1 GB graphics , 500 GB and 16 GB of ram, ssd would cost about £900 what would be the main benefits
  
  Thank you very much
  
  Shott

  I stand well partially corrected. The 8 gig RAM max was on the technical page of HP and the maintenance manual says maximum 16 concerts. As you note, it will run at 1333 mhz, but yes you can install 16 gigs and upgrade to Windows 10 made no difference there. You may installed 16 concerts with all 64-bit operating systems.

  Here is the Manual:

  Your repair manuals

  Page 28 - 29 a the list of supported wireless adapters EXCEPT the

  Module Intel Centrino Advanced-N 6230 WLAN 631956-001

  a mistake is well-documented. The part number is actually a single band card Ralink and other versions of HP of the 6230 Advanced-N used in some business models will not work in your laptop. We beat this horse dead on many posts here.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Envy Phoenix h9-1333: upgrade CPU Cooler

  Hi all
  So today, I have a problem that drives me crazy. I have a HP Envy Phoenix h9-1333 with a Core i5 3570 processor, 10GB of RAM DDR3, 2 TB Seagate Barracuda (drive C), 16 GB SanDisk SSD caching, and an Asus GeForce GTX 650Ti upgrade. So I went the process of upgrading my CPU cooler to a cooler much more efficient, quieter, then I jumped on the air cooled by the train running and bought a Cooler Master Hyper 212 Evo. The day before, I moved the components of my Phoenix in a NZXT Phantom 410 Mid Tower case. However when I went to install the stand-offs for the cooler I found that the stand offs were too big for the holes in the motherboard. After you create a scene in front of my dogs full of swearing, I put the old ice on and now makes me here. Yes, the Evo of 212 Hyper will fit in the case, I went up to now this question. My problem is that the stand offs do not fit into the holes and another problem that arises is that there is a back plate which is hard at least to my knowledge but I thought I could work but actually I could not. Is that what I can do so that I can't take back the new cooler?

  Hello

  You must have been struck by lightning the issue with your other post.

  HP generally uses screws to the holes in the motherboard to ensure a fit for the heatsink of HP.  Cooler Master may have some suggestions.

  Saw a post here if someone claims that the back plate can be removed. It still leaves you an adjustment problem. I suggest make you a model of the sink top of page area of editing and send to Cooler Master and ask for advice.  The Cooler Master 212 EVO is an industry best rated air cooler.

• The upgrade of the graphics cards and processors on the Hp Pavilion dv6-6c35dx

  I was wondering if I can improve the graphics and CPU on my Hp pavilion dv6-6c35dx, or should I buy a new computer in the future?

  Hello:

  You are unable to pass the video to your laptop without having to replace the whole motherboard with one that may have better graphics that could be included in the service manual for your laptop.

  C responsible for costs making a such update is not worth. A new motherboard for your PC would cost almost as much as a new PC.

  You can also see Chapter 1 of the list of supported processors.

  I think with AMD processors, you must also replace the motherboard to upgrade the processor.

  http://h10032.www1.HP.com/CTG/manual/c03099531.PDF

• With the help of the rocket fish Universal CPU Cooler on a Dell Inspiron 570 motherboard - how do I install it?

  Recently, I upgraded my CPU to x 2, a 4 950 CPU x. The stock of the 4 950 x cooler is not set up.

  The motherboard is a LGA 775, but use and requires screws.

  I bought a rocket fish Universal CPU cooler from bestbuy and the fit is good, but the screws are the problem.

  I want to install this cooler without the use of the replacement of the rear plate of the central unit.

  Then a few names the screws you have to climb?

  Any suggestions?

  Wrong place, my apologies.

• Change in the thresholds of CPU temperature

  Hi guys,.

  One of our m3 nodes c220 has a low Max. Warning and Max. The failure for the P2_TEMP_SENS value:

  P2_TEMP_SENS name:
  Sensor State: Normal
  Reading: 42.5
  Units: C
  Min. caveat: n/a
  Max WARNING: 62.0
  Failure of at least: n/a
  Max-failure: 72.0

  I don't know how this value has been set, the other processor on this node has a "maximum caution 'value of 96.0 and one' Max. failure"value of 99.0 as do processors I checked in our other nodes. "  This threshold down is at the origin of many messages be recorded in the journal of CIMC events, that the CPU temperature regularly exceeds those thresholds.  This question is that I don't know how I can reconfigure these thresholds.  These thresholds have been set or can they be set up?

  Hello

  Can you provide a screenshot of it?

  Also I do not think there is anything that you can set these values, it must be set by the system.

  This server is running this firmware?   You're other nodes running the same firmware?

  Try the upgrade of the firmware of your server and look at these values.

  I would like to know if this helps.

• XPS 8700: Upgrade CPU cooler

  Hello

  I have a Dell XPS 8700 and I am facing some problems to find a cooler to replace the original one.

  It came with a modified version in stock intel cooler. Is essentially the same heatsink (not high quality metal) and a 80mm fan (4-pin).

  The problem is that the holes just let me install a chiller that uses screws. I can't put coolers that use this model clip or PIN (as we see in Stock Intel) and I'm afraid to buy new and it cannot install due to the incompatibility of holes in backplate.

  Someone here has already improved the CPU cooler? If someone has already done so, could you please tell me the name of the model of cooler?

  Thank you.

  Here are a few threads.

  This one down a 8700 transplanted in a new folder.

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19587289?pi21953=2

  It is a water cooler on a 8700 with a processor upgrade:

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19648355

  and the other.

  en.Community.Dell.com/.../19625539

• Upgrade of the computer

  I need to update my PC like the motherboard memory has a problem. This will invlove a new drive hard (the old drive is not SATA) motherboard, cpu (old cpu will not be on the new motherboard) and memory. I currently have windows 7 Home premium installed (having the DVD key and produced), it was an upgrade of the OEM windows Vista home premium comes with the PC (have the DVD but no product key) retail. I would like to transfer my current windows on the upgraded computer system. Is this possible and if so, how?

  Windows Vista which has improved to she gave with your computer? If so, any changes to the motherboard will make Windows Vista license which means your upgrade to Windows 7 will no longer have a qualification license when you install the new motherboard.

  Otherwise, you would need to invest in a Windows 7 full version license.

  You can try the following well, he has worked for some people:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Upgrade of the Sierra: where are my pictures!

  Well, I see that a lot of people have this problem but have yet to find an answer to the problem anywhere.  My patience is lost, I despise the fact that I have * money on shit Apple but I need to find my photos.  Stupidly, I'm fallen for Apple BS again and "upgraded" in the Sierra.  Now all my photos and the Organization, that I spent a year are no longer accessible by something else as well as the new 'Photos '.  I never had iPhoto first, never used.  Each thread simple discussion I can find guard speaks of iPhoto and animated for the Photos news images.  I can see the picture files, but all my organization has disappeared; and I can't access my photos of any other application EXCEPT Photos!  If I could find an Apple exec I would slam their face until they cried!

  Someone has a REAL solution to get my photos and the Organization in the way it was before this stupid OS Sierra update?

  < re-titled by host >

  I think you should be able to find your photos here ~/Pictures/Photos Library.photoslibrary.

  Presumably, you could also restore your library and its organization of your backup so that you can continue to use any photo library program you usually use.

• Can't change language after OS upgrade of the Sierra

  Hello world

  After the upgrade of the Sierra, my MacBook Pro has decided to return to the French.

  Now, I am unable to change the language on the menus and dialog boxes.

  I tried to put the English in language and text preferences, same problem.

  I also tried to run sudo languagesetup, same problem.

  Thanks for any help you can provide.

  See you soon!

  Language changes are not applied immediately to the running applications, but they should be applied to the applications that you start after the change is made. Changes to the Finder will apply if you raise, or to do it easily, just log out and back in.

  Log out and back in? Or restart your mac? If you didn't do it and let us know.

• Difficulties with all versions of html files since the upgrade of the Sierra

  I have problems opening and dealing with htm, html, html5 files since the upgrade of the Sierra.  Someone else?

  Please provide details. What problems are you having? HTML files open in a web browser, the browser you are using?

• I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  It is impossible to tell from this information. Choose about this Mac from the Apple menu, click more information and search the model identifier.

  If it's MacBook1, 1, 10.6.8.

  If it is MacBook2, 1-MacBook4, 1, 10.7.5.

  If it's MacBook5, 1 or MacBook5, 2, 10.11.6.

  If it's MacBook6, 1 or greater, 10.12.

  (144865)