noob needing help! How to rotate a triangle?

Similar Questions

• the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  Hello

  It seems that you want to restore the files removed from the memory card.

  I will definitely help you with this.

  I would say you can search the Internet for data recovery software by using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but did need help how to get rid of the pre-selection, so he's going to defau

  All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but need help how to get rid of the preset then all photos of goes to Default or in the shot. Thank you

  Go to the develop module and highlight all the images in the film at the bottom of the screen. Enable automatic synchronization, and then click the reset button. To reset all the images in your camera default settings.

• Need help: how to remove a partial black framing of end of video? 1/8 end frame is black

  Need help: how to remove a partial black framing of end of video? 1/8 end frame is black. I inserted the last clip on the timeline and it ends with this last scene with vertical black bar of 1/8th. I just need to know how extend this image to get rid of black then the image is there without messing up the audio file. I'm still learning, so please have mercy. I looked for answers online and friends, but have not yet been answered. I'm almost ready to download so hopefully get response as soon as possible. Thank you. JR

  What is the problem you are having?

  http://forums.Adobe.com/message/5814212#5814212

• Need help how to do a job of puzzle game

  Hey guys,.

  In case anyone is interested... I need help to get the last elements of my memory game of brainstorming on (flip two cards to see if they match) to work properly. I have it all set up so that when the two cards are turned over, it can be checked for accuracy and user can continue on with the game. I'm working on two other things that I don't know how I could do.

  (A) I need to make sure only two cards can be returned at the same time. At first I tried to do this by assigning a value to the expression (say 1, for each round) and whenever you click on a map, it checks for what the current value is. If the value was two, showing two cards had already been selected, all cards would be disabled. This eventually led to either never be able to re - activate, or only the first game and then not work again. Any ideas on how to prevent a user from flipping over 2 cards at the same time, then after checking the accuracy once again flipping of cards with a limit of two-card again?

  (B) related to the last question is the need to be able to have a card back (let me clarify by back flip, I hear a "card cover" or button essentially custom, I made that looks like a playing card.. ish would be re-shown having been hidden when selected), if after checking for a match, it is not really a game , or others if it is a mistake. Any ideas on how to do this?  Thank you very much in advance.

  I'll be sure to the credit of those in the project for your help.

  -Evan

  Did you look at the games that I have on my blog?

  http://lilybiri.posterous.com/concentration-game-created-exclusively-with-c

  http://lilybiri.posterous.com/gaming-in-Las-Vegas-DevLearn-2011

  Having a version for COP6 as well, unpublished, but talk about the changes in this film:

  http://www.YouTube.com/watch?v=Sy09xPoP69A

  The deactivation is possible as well...

  Lilybiri

• How can I change this pdf file? Noob needing help pro

  I have to translate this pdf file to Spanish. I tried the following "Advanced-> editing change the text" did not work... maybe they analyzed the file? judge: "document-> ocr text recognition"... does not work either.

  I have Adobe Acrobat Professional. I have attached a page of the file I want to edit. Please help me!

  Have you tried TOOLS > advanced editing > text editing tool? You will need the fonts on your system to do the editing. You may be able to change the font to something on your system if necessary. The file is the text (in boxes) and the text editor tool should do the job. I managed to change the Arial fonts (not all of them, there are some who are still in the old police who are numbers). I posted the result on http://wadavis.ece.vt.edu/CO2 ophir lenses.pdf. (you may need to replace the spaces with % 20)

• Complete noob needing help on the website portfolio online.

  Hello world!

  So I'm a 3D artist seeking to make a Web site that appears in most browsers, I currently use a flash model that is not so good that it does not work on my iphone (which is also something I need).
  I followed some tutorials and have a basis for my site but do you have a problem. Currently I use tables and an iframe to have all my pages open under my header/navigation bar which seemed to work until when I want a different size page to open in the iframe.

  
  I have a portfolio/gallery with many miniatures section which should link to another page with pics and info of this particular piece of superior resolution, the problem is that I get this horrible scroll bar if I put scrolling iframe on but if I don't have the full Web page after clicking on a thumbnail gets cut. Also I really don't want a scroll anyway I want to click on a thumbnail and then page down extend when the new page is loaded.

  
  I don't really know other ways to do what I'm a noob at coding etc so any suggestions on how to get this to work or links to tutorials would be great.

  Here is the test www.benoldfield.com/Website_test Web site, please click on the first thumbnail/image to see what I mean, the others are not configured and excuse long time loading and general design, not been worrisome in this regard.

  Thanks for any help!

  In a Word, start your project with a development shaped predefined CSS (preferably one that has been tested to run on all browsers).

  http://ALT-Web.com/templates/basic-1-Col-fixed.html

  Add content wide header and footer of the site.  Save it as a template (.dwt file) DW.  Add editable regions to the content model that will change the page.  Save again.  Close.

  File > new Page > model.  Insert thumbnail images.  Save as page index.html (your home page).

  File > new Page > model.  Insert images in real size and text descriptions. Save as Page2.html (or anything that is appropriate). Repeat for other pages of the site until you are finished.

  Open index.html page.  Each thumbnail link to its corresponding page of the site. Site Preview in browsers.  When you're happy, upload to your web server.

  Create your first website DW CS5-
  http://www.Adobe.com/devnet/Dreamweaver/articles/first_website_pt1.html

  
  

  Advice on when to use DW templates, library and SSIs-
  http://www.Adobe.com/devnet/Dreamweaver/articles/ssi_lbi_template.html

  DWT model - Basics
  http://forums.Adobe.com/message/2926278#2926278

  More information on DWTemplates-
  http://forums.Adobe.com/message/2032104#2032104

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• I need help, how to configure virtual machines with PowerCLI IP addresses

  Hi all

  I open this topic because I really need your help.

  I wrote a script that can automatically create 10 VMs on my ESX Server.

  I run the script with PowerCLI.

  I want now to help script, give the ip on the 10 machines created settings.

  I don't know how, can you enlighten me on this subject?

  Is there a script that can do this?

  Thank you very much.

  Isn't the "0.2 | ForEach-Object {"a loop for? IMHO, it is a loop in the PowerShell way.

• I forgot the password to connect to my computer. need help how to reset

  I have a windows xp 6.0 desk top 5000 series and not for the life of me, I remember my password to connect to my computer. is there a way to reset it with out having to pay $99 to consider in the store?

  Hello

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Need help how to extract files from laptop which has a damaged keyboard

  I have an old laptop with a damaged keyboard that is running the same os as my new, Windows Vista and im trying to figure out how I can download files and media that I want to record as I am not keen to repair the old Toshiba satellite pro that the new is a HP pavilion any help would be appreciated

  Hello

  Using the keyboard on the screen.

  Control Panel - easy access

  Or WIN Key + U (Win Hold key and tap U)

  How do I change the keyboard to the screen on or off in Vista
  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  Toggle the on-screen keyboard
  http://www.technipages.com/EnableDisable-on-screen-keyboard.html

  I hope this helps and happy holidays!
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Noob needs help

  I don't have a background in development, I just introduce my self and do with webworks. I have a few questions and I was wondering if someone would be kind enough to help me with them.

  1. the most crucial is the debugging token. When I try to pack my application with the debugging token I created I get an error: "the path token debugging provided points not to a file. Believe me, I checked and double checked the name of path and it is written correctly, the debugging token was created successfully. The path is also correct. BTW I'm using a mac.

  2. can I use the api of advertising with the playbook?

  3. can the api announcements and bbm api added to our applications using a mac? (examples only show a system based on windows)

  4. How can I keep the footer at the bottom of the page regardless of the amount of content that has the page? (bypassing it fixed)

  Any help will be appreciated, thx in advance.

  Try

  /Users/luiscalderon/documents/DebugToken/debug_token.bar

  I don't have a Mac, but the path must be a full path, and I don't think that it can withstand the ~ shortcut.

• Need help - how to open the 2007wfp cover? Monitor has intermittent problem with vertical sync.

  To open the lid of my 2007wfp monitor I removed the 4 screws located on the site where the monitor gets attached to the bar, but the cover will come off the coast. There must be some tighten hidden somewhere, which I couldn't find.

  Does anyone know how to open the box?

  Is there a manual to repair available somewhere?

  Any help is greatly appreciated!

  Message edited by HEW399 on 03/28/2008 19:42
  
  

• I need help how can I sign a paper visa pdf

  How DO I SIGN a VISA DOCUMENT

  Hi rositaf96250536,

  Please see the steps in this KB for help doc: sign a PDF file in Adobe Acrobat Reader.

  Let us know if you encounter any problem.

  Kind regards

  Meenakshi

• Need help how to group information using bi publisher of learning.

  I'm new to bi publisher and I'm lost.  I want to have a group and display the program once type at the top of this group.
  So, I want to display each role information that correspond to this group located below.

  My program_type group of the top poster and curls.
  The rest of the prints some information, but not with the appropriate group.    I have my sql, I got my information and sorted but I do not group the information into my sql.

  I don't know if that should happen in my sql before I exported the information in xml format.

  I'd appreciate any help or tutorial that will lead me in the right direction.

  MY MARKUP

  <? for-each-group: ROWSET1_ROW; / PROGRAM_TYPE? > <? type: PROGRAM_TYPE? > <? PROGRAM_TYPE? >
  <? for-each: ROWSET1_ROW? > <? PROGRAM_CODE? >
  <? Program name? >
  <? PROGRAM_DESCRIPTION? >
  <? FINANCIAL_PROG_NAME? > <? end foreach? >
  <? the end for the Group? >

  How IT DISPLAYS

  
  Theatre
  TV
  Activity |  ACTD |
  code |             |
  03. SHOW | Good Times |  TEST1
  03. SHOW | Jeffersons |   TEST1
  04. MOVIE | Transformers |   TEST1
  04. MOVIE | SpiderMan |   TEST1
  04. MOVIE | The planet of the apes | TEST1

  MY XML

  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < DATA >
  < ROWSET1 >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 03 < / PROGRAM_CODE >
  See THE < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  the good times < program name > < / program name >
  TV < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 03 < / PROGRAM_CODE >
  See THE < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  < Program name > Jeffesons < / program name >
  TV < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 04 < / PROGRAM_CODE >
  FILM of < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  Processors of < program name > < / program name >
  Theatre of < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 04 < / PROGRAM_CODE >
  FILM of < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  SpiderMan < program name > < / program name >
  Theatre of < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < ROWSET1_ROW >
  < PROGRAM_CODE > 04 < / PROGRAM_CODE >
  FILM of < PROGRAM_DESCRIPTION > < / PROGRAM_DESCRIPTION >
  planet of the apes < program name > < / program name >
  Theatre of < PROGRAM_TYPE > < / PROGRAM_TYPE >
  Test1 < FINANCIAL_PROG_NAME > < / FINANCIAL_PROG_NAME >
  < EFFECTIVE_START_DATE > 10/01/2000 < / EFFECTIVE_START_DATE >
  < EFFECTIVE_END_DATE > < / EFFECTIVE_END_DATE >
  < / ROWSET1_ROW >
  < / ROWSET1 >
  < / DATA >

  Howard

  Found the answer in the next post

  How you group themes

  answer:

  Yes, you can achieve this by using the data model. Read the 5.6.2 XML Editor User Guide (Chapter 9) for more details.

  Link to the document

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/documentation/xmlpenterprise562userguide-130839.PDF

  sample

  
  

  
  
  
  
  

  Thank you

• Need help | How to clear the filter of af values: table on table linen

  Hello

  JDeveloper version 11.1.1.7

  I have af:table inside a taskflow to which has been added to several pages as a region.

  The problem I'm facing is if I enter any value in current input for the data in the column filtering and if I navigate to another page that has even added taskflow as a region filter values is still visible.

  How can I clear the values entered in the input of the filter text.

  code fragment:

  < af:table value = "#{bindings." BulletinDataVO21.collectionModel}.

  Binding = "#{pageFlowScope.bulletinArchieveBean.bulletinTable} '"

  var = "row".

  lines = ' #{bindings. " BulletinDataVO21.rangeSize}.

  emptyText = "#{bindings." BulletinDataVO21.viewable? "{customtaskflowsBundle ['table.no.data.to.display']: customtaskflowsBundle ['table.access.denied']}."

  fetchSize = "#{bindings." BulletinDataVO21.rangeSize}.

  filterModel = "#{bindings." BulletinDataVO21Query.queryDescriptor}.

  queryListener = "#{pageFlowScope.bulletinArchieveBean.onQuery} '"

  filterVisible = "true" varStatus = "vs."

  rowBandingInterval = "0" id = "t1".

  styleClass = "datatable_inside_wrapper."

  autoHeightRows = "25" width = "700" >

  the queryListener at the bean code:

  {} public void onQuery (QueryEvent queryEvent)

  QPF FilterableQueryDescriptor =

  (FilterableQueryDescriptor) queryEvent.getDescriptor ();

  Map map < String, Object > = fqd.getFilterCriteria ();

  If (log.isDebugEnabled ()) {}

  {for (String key: {map.keySet ())}

  log. Debug ("touch of filter criteria:" + key + ", value:" +)

  Map.get('zoom') (Key));

  }

  }

  final String publishingFromKey = "Publishingfromdate";

  final String publishingToKey = "Publishingtodate";

  Object publishingFrom = map.get('zoom') (publishingFromKey);

  Object publicationdans = map.get('zoom') (publishingToKey);

  String titleValue = (String) map.get('zoom') ("Value");

  If (StringUtils.isNotEmpty (titleValue)) {}

  Map.put ("Value", "%" + titleValue + '%');

  }

  String targetDepts = (String) map.get('zoom') ("Targetdepts");

  If (StringUtils.isNotEmpty (targetDepts)) {}

  Map.put ("Targetdepts", '%' + targetDepts + '%');

  }

  Category String = (String) map.get('zoom') ("Category");

  If (StringUtils.isNotEmpty (category)) {}

  Map.put ("Category", "%" + category + '%');

  }

  DCBindingContainer links =

  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  OperationBinding = setPublishingFromDateStartOperationBinding

  bindings.getOperationBinding ("setPublishingFromDateStart");

  OperationBinding = setPublishingToDateEndOperationBinding

  bindings.getOperationBinding ("setPublishingToDateEnd");

  setPublishingFromDateStartOperationBinding.getParamsMap () .put ("value",

  publishingFrom);

  setPublishingToDateEndOperationBinding.getParamsMap () .put ("value",

  Publicationdans);

  Map.Remove (publishingFromKey);

  Map.Remove (publishingToKey);

  setPublishingFromDateStartOperationBinding.execute ();

  setPublishingToDateEndOperationBinding.execute ();

  DcIteratorBinding = DCIteratorBinding

  bindings.findIteratorBinding ("BulletinDataVO2Iterator");

  ViewObjectImpl = bulletinVO

  (ViewObjectImpl) dcIteratorBinding.getViewObject ();

  final String publishingFromCriteria = "QueryByPublishingFromDate";

  final String publishingToCriteria = "QueryByPublishingToDate";

  If (publishingFrom! = null) {}

  bulletinVO.setApplyViewCriteriaName (publishingFromCriteria, true);

  } else {}

  bulletinVO.removeApplyViewCriteriaName (publishingFromCriteria);

  }

  If (publicationdans! = null) {}

  bulletinVO.setApplyViewCriteriaName (publishingToCriteria, true);

  } else {}

  bulletinVO.removeApplyViewCriteriaName (publishingToCriteria);

  }

  JSFUtils.invokeMethodExpression ("#{bindings.") BulletinDataVO21Query.processQuery} «»

  Object.Class, QueryEvent.class,

  queryEvent);

  Map.put ("Value", titleValue);

  Map.put ("Targetdepts", targetDepts);

  Map.put ("Category", category);

  Map.put (publishingFromKey, publishingFrom);

  Map.put (publishingToKey, publicationdans);

  }

  Please let me know we can clear the values entered in input boxes of text for filtering on whenever the load table.

  Thank you

  Madhukar

  Hi all

  I could solve the problem.

  Clear the fault and implicit criteria VO display!

  Here's the code to do the same.

  Hope it will be useful for others as well, also let me know if this can be done in the best way.

  Bean code:

  DCBindingContainer links =

  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding data binding =.

  bindings.findIteratorBinding ("TestDataView1Iterator");

  If (dataBinding! = null) {}

  ViewObjectImpl = testDataVO

  (ViewObjectImpl) dataBinding.getViewObject ();

  testDataVO.reset ();

  The below two lines code clears the default and display implicit criteris

  which gets set in ViewCriteriaManager when we filter the data in the table to help

  This table filter text box in the column af:table headings

  NOTE: It will not erase the other criteria of which are defined by users in VO

  testDataVO.getViewCriteriaManager () .removeViewCriteria (ViewCriteriaManager.DFLT_VIEW_CRITERIA_NAME);

  testDataVO.getViewCriteriaManager () .removeViewCriteria (ViewCriteriaManager.IMPLICIT_VIEW_CRITERIA_NAME);

  If (param.equalsIgnoreCase ("home")) {}

  testDataVO.setWhereClause ("attachment = 'Y'");

  } else {}

  testDataVO.setWhereClause ("attachment = ' n '");

  }

  testDataVO.executeQuery ();

  }

  Thank you all for the suggestions.

  Thank you

  Madhukar