NOR-IMAQ: The transmitted session or the interface is not valid, why?

Similar Questions

• NOR-IMAQ: The interface passed or the session is invalid

  Hello

  I try to use a USB (thorlabs DCC1240c) camera with the "Grab and save in AVI.vi ' example.

  When I run the file that I had ' NOR-IMAQ: the session or the interface passed is not valid.

  I checked NEITHER MAX and the name of the interface of the camera is cam0 and that's what I entered in the 'Name of the Interface' box in the front panel.

  What is the problem?

  Thanks in advance,

  Gabriel

  -Replace all screws by screws IMAQ IMAQdx.

• Œuvres of VPn on the inside of the interface, but not outside

  I have a PIX-525 with UR license.  I tried to get my VPN to work since my iphone over the weekend, but nothing helped.  Then, I changed the interface inside to see if my iMac could connect and bingo!  It worked.  I then tried to log in via the inside of the interface with my iphone and it worked.

  I have connected a PIX-515e and, using the same settings, can connect to the external interface via my iPhone.

  Strange.

  Now, to answer the pressing questions, yes I changed the IP address of the server in my client IPSEC settings to reflect the external and internal interfaces I was testing each of them.  I was using a pré-partagées secret.  Yes, the secret has been entered correctly and they have all matched... Yes, the name of the tunnel has been entered correctly.  I used the database local user for authentication with username/password name (i.e. no certificate of authorization to make things simpler for debugging).  I changed the syslog to debugging and I see absolutely no error when you try to connect my iphone to the external interface (i.e. turn off wifi so I'm on my 3G data network).  The only thing I see is where my iphone hits the external interface and it's disassembly (or whatever his name is) but that's all.

  Why this work like a charm with my PIX-515e and not my PIX-525?  VPN accelerator card in the 525 can be at fault?  The 515e doesn't have the aecellerator card.  No idea why can't I several a VPN connection inside the interface but not outside?

  Hi Tim,.

  Well it's not so much the DNS rewrite that is the problem (if you delete just the keyword dns VPN will still fail) but using the external interface for NAT. So all traffic intended for your address of the external interface is passed to the "gcbrouter", including vpn traffic.

  I'm thinking about a way to solve this problem, but I really can't find anythign right now. Using a different interface will not work because you can have only a single default route.

  I wonder if this would work:

  remove the NAT interface:

  not static (DMZ, external) gcbrouter netmask 255.255.255.255 dns interface

  Replace with PAT interface, i.e. add such a line for each port that you want to be contactable on the DMZ server:

  static interface tcp 80 gcbrouter 80 netmask 255.255.255.255 (DMZ, outside) dns

  static (DMZ, outside) of the 25 gcbrouter 25 netmask 255.255.255.255 tcp interface dns

  etc.

  In all honesty, I have never seen rewriting dns used with PAT so not quite sure if it will work.

  HTH

  Herbert

• VISA (Hex 0xBFFF001E) error the specified state, the attribute is not valid or is not supported as defined by the resource.

  Hello

  First of all that I must say I just starting with control of the instrument using Labview. For this reason, it is possible that the problem I have is easy to solve. However, I am looking for any solution for the forum, but unfortunately I can't fint anything.

  While the situation is this: I'm looking to plug a power Analyzer (Yokogawa WT1800) with the PC through GPIB. To achieve this, I use the USB/GPIB Interface of Agilent 82357 B. The connection is done correctly because I can see and communicate with him through the Explorer NI MAX.

  In order to achieve control of the instrument using Labview, I downloaded and installed the driver of Yokogawa WT1800 (Driver instruments ykt1800) using the NI Instrument Driver Finder tool. The problem I have is that when I run the examples, I find the following error message:

  Error 1073807330 has occurred to the property (arg1) node in Yokogawa WT1800 Series.lvlib: Initialize.vi-> Yokogawa WT1800 series continuous measurement Normal.vi

  Possible reasons:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not taken in charge as defined by the resource.

  I tried to change the input of the open Visa arguments vi because I think that this is where is the problem, but I can't reach any solution. The following image is attached to the block diagram of the initialize.vi:

  

  Any help is appreciated.

  Thank you.

  I suspect the redirect property. Try to remove it.

• I opened a new tab, but the boxes disappeared and comes with "the address is not valid.

  I opened a new tab and it used to show my recent history in about 12 boxes but now I get this:

  "The address is not valid

  The URL is not valid and cannot be loaded.

  Oh dear.

  Unfortunetly, you'll have to do a clean reinstall of firefox.

  https://www.Mozilla.org/en-GB/Firefox/new/

  Don't forget to restart your PC inbetween facilities

  Good luck

• When I click on my icon of firefox homepage says "the address is not a valid URL. The URL is not valid and cannot be loaded. How can I fix it?

  When I downloaded Mozilla Firefox and clicked on the Firefox icon I get this message on the Firefox homepage "the address is not valid.

  The URL is not valid and cannot be loaded. "I can always access the internet but what do I do to get rid of this message. The home page does not display the icon of firefox.

  You can check the setting of the homepage:

  • Tools > Options > general > startup: Homepage

  Firefox supports several home pages separated by ' |' symbol (pipe).

  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I received a signed email (signed by IdenTrust) Thunderbird said the signature is not valid. It says that I do not trust the CERT authority. Help please.

  I sent an email signed by my work at home (which uses Thunderbird). I can read the email ok but get the following certificate error message:

  This message contains a digital signature, but the signature is not valid. The certificate used to sign the message was issued by a CA that you do not trust to issue this type of certificate.

  The issuing authority is: IdenTrust ECA 3

  How can I alleviate this problem? I need send emails encrypted back, but without this work, it is impossible.

  Thanks in advance.

  You must have the root CA cert in the store of certificates of Thunderbird on the References tab.
  The error message indicates that the cert is, but you need to change the trust.

• The address is not valid problem when opening new tab

  opening of firefox (I crash usually close under Task Manager), it reloads all tabs as it should.
  But when you open a new tab, I get "the address is not valid.
  I tried all the parameters of the start of the blank home page and latest opening option.
  I have tried all suggestions in other markets, reset... Subject: config
  I wish it had a document giving detailed information for all parameters
  When on the topic: config and search newtab, the only user adjustment (not default) is
  browser.newtabpage.storageVersion; 1 and I tried 0,1,2,3,4,5 restart no change even between the two.
  Have been re-intall, reset, safe mode, nothing works
  the tab works normally after the error, which means that I can start typing in the address bar and even complete works of auto... I restarted just fz and he did a 27.0.1 update
  that did not fix it either... I'm bored of the default page of fx that has recent photos.

  
  

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• Recently downloaded version 9.0.1 and the url is not valid for the default home page. The default home page is still supported?

  I currently have www.google.com set as my homepage, but Firefox says that the url is not valid for the default home page.

  The problem is now solved with the current version of Firefox 10.0. Thanks for the help ccbrunt and SafeBrowser.

• ThinkPad Tablet 2 - error 2201: UUID of the Machine is not valid

  I just unboxed my "nine" Thinkpad Tablet 2 and got an Error Message 2201: UUID of the Machine is not valid.

  Network card, sound card, USB camera don't work at all. They said that I have not installed drivers for these devices. Because I can not connect to the Tablet, I'm unable to install a driver for them.

  Can someone guide me to solve this problem?

  TKS you all!

  Yes, you will need to send the machine back for the service.

• VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  I try to open a com port Seraglio in LabVIEW get this error:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  It occurs in ISA set up a Serial Port (Instr) .vi and seems to be related to the speed of transmission. If I use anything else than 9600, I get this warning. I need to use 115200. I can open successfully to other com ports at 115200.

  I am able to talk to this device using other Terminal programs to 115200 without problem. It is only through LabVIEW and NI MAX.

  The Unit presents itself as "Stellaris Virtual Serial Port (COM12)" in deveice Manager.

  Is there a way to get around this?

  Thanks in advance!

  
  

• Outlook 2002/Windows error message 7: can't open this item. The object is not valid.

  I recently bought a new computer (eMachine ET1831-05) with Windows 7 installed at the factory.  I installed Outlook 2002.  My old computer died & I have been unable to export my calendar, contacts, etc., so I'll have to enter everything manually in my new.

  When I save a calendar appointment is periodic (for example a birthday) I'm unable to open the appointment.  When I try, I get a message - cannot open this item.  The object is not valid. If I set an appointment that recurs not , everything works fine.

  Any suggestions?

  Thanks in advance!

  Windows Update has nothing to do with your questions.

  Please post here instead: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/threads

  THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impossible to download the certificate is not valid

  Original title: files

  When I try to download a new program it asks me to register and then download the program, but microsoft then comes up and know the certificate is not valid

  When I try to download a new program it asks me to register and then download the program, but microsoft then comes up and know the certificate is not valid

  Go to the ms Update site and run CERT prog custom updates may be updated.

• I had itunes on my computer, but now it is said that the program is not valid, it is possible it has been deleted by accident, and if so do I need to reinstall it and how?

  I had itunes on my computer, but now it is said that the program is not valid, it is possible it has been deleted by accident, and if so do I need to reinstall it and how?

  Hi bnmayala,

  Thanks for posting. Please contact Itunes support for this issue. I have included a link to the site below.

  http://www.Apple.com/support/iTunes/

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think