Northrop Grumman root certificate does not not trust?

Similar Questions

• Update of root certificate does not (error CAPI2 event ID 60)

  Hello

  I recently did a clean install of Windows 7 SP1 on a new system.
  I noticed that there are sites including https / SSL certificates do not seem valid where I don't expect it (for example BBC laboratories), using the two Chrome and IE.
  After some searching on the forum of other messages, I followed it down to a problem with Windows 7, do not automatically update root certificates installed. Specifically, using MMC event logging, CAPI2 event ID 60 (store) returns 5 "access denied." This causes then event ID 11 and 30 to not like the certificate chain fails to build and check.
  Other points to note:
  • Normal Windows updates work fine
  • Most of the sites using https / SSL works fine (i.e. a root certificates are installed with success - if those provided with Windows or have been updated since the installation I don't know)
  • I tried to disable all my firewall / antivirus programs where they prevented updates, no effect
  Anyone know a fix for this - I don't really want to having to perform a complete reinstallation :(
  Thank you!

  Thanks sirot,.

  Unfortunately, this does not work.
  In the end I just did a re-complete installation of Windows which seems to have solved the problem.

• Firefox does not trust, a particular secure Web site I know is course trust but other secure Web sites

  Firefox does not trust, a specific secure Web site I know is safe, but there is no trust other Web sites secure. In addition, Internet Explorer trusted this website and Firefox on another computer trusts of the same site. When I try to connect Firefox tells me it doesn't have a valid certificate (even though I know there is one) and I have to make an exception for you connect. Is it possible that I can fix this and get the appropriate in this particular program of Firefox certificate?

  Be sure to select "All Files" and not "text files" type when you save the file in Notepad (text files add a hidden .txt file extension).

• The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  That's what I have I am trying to download adobe programs

  which is not a download error unless you use some sort of download manager/assistant that is also trying to install.  do you have a download manager/assistant?

  or is it an error of installation and, if so, what type of program (name and version) are you trying to install?

• Could not open install Assistant.  I get this error message: cannot install the application due to a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not

  How do I download a trial of 12 items, Adobe?

  I followed the instructions to download assistant... but get this message: the application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the author of the application.

  Hi alposer,

  Please delete the copy of Adobe Download Assistant you have installed, and then reinstall Adobe Download Assistant.

  Kind regards

  Rave

• Firefox does not trust any connections/security certificates

  I've just updated to the latest version of firefox and now whenever I visit a secure website, I tells me that it is an unreliable connection and need to add an exception to visit. When you view the certificate shows he cannot be verified for reasons unknown.

  What is happening with all Web sites, including sites such as Google or Facebook.

  I've tried a few things I found on the web, but the positions were quite old and does not solve the problem so would appreciate any help I can get

  Also, it seems that the ESET AV is intercept the secure traffic. If ESET has an option to install the certificate root in Firefox, you can try that. You can also temporarily check trying to disable HTTPS scanning in ESET. The ESET support would also be useful.

• Failed Anyconnect corresponding certificate does not deny the user

  Hello

  I'm trying to implement matcing certificate when you use Anyconnect.

  I want ASA to check the issuer CN to a value.

  I have it configured, and it works.

  But when the corresponding defective certificate, the user still have access. It connects to the GRP_policy 'GroupPolicy_solbakken-any-test', but it should have failed.

  The log looks like this

  09:28:04 | 716001 | Group user IP <62.148.39.161>WebVPN session began.
  09:28:04 | 734001 | DAP: User Øystein solbakken, 62.148.39.161, connection AnyConnect Addr: following DAP records were selected for this connection: DfltAccessPolicy
  09:28:04 | 716038 | Group user IP <62.148.39.161>authentication: success, Session type: WebVPN.
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 113009 | AAA recovered in group policy by default (GroupPolicy_solbakken-any-test) for user = Øystein solbakken
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 717037 | Research Group of the tunnel using certificate cards failed for the peer certificate: serial number: 2266234 A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = dc = local, lund, issuer_name: cn=lund-S-TRD-AD-01-CA,dc=lund,dc=local.
  09:28:04 | 725002 | 62.148.39.161 | 65223 | Complete appliance SSL negotiation with customer Internet:62.148.39.161/65223
  09:28:04 | 717028 | The certificate chain has been validated successfully with the warning, revocation status has not been verified.
  09:28:04 | 717022 | Certificate has been validated successfully. Serial number: 2266234A 000000000035, the name of the object: cn = Øystein solbakken, or = Brukere, OU = LUND, dc = lund, dc = local.
  09:28:04 | 302014 | 62.148.39.161 | 6875. 89.248.2.6 | 443. Connection TCP disassembly 2213 for Internet:62.148.39.161/6875 to identity:89.248.2.6/443 duration 0: 00:00 4448 TCP Reset bytes - I
  09:28:04 | 725001 | 62.148.39.161 | 65223 | Count of negotiating SSL client Internet:62.148.39.161/65223 TLSv1 session.
  09:28:04 | 725007 | 62.148.39.161 | 6875. SSL session with client Internet:62.148.39.161/6875 is complete.
  09:28:04 | 302013 | 62.148.39.161 | 65223 | 89.248.2.6 | 443. Built of TCP incoming connections 2214 for Internet:62.148.39.161/65223 (62.148.39.161/65223) at identity:89.248.2.6/443 (89.248.2.6/443)
  09:28:04 | 725002 | 62.148.39.161 | 6875. Complete appliance SSL negotiation with customer Internet:62.148.39.161/6875

  Can someone help me with this? I only want users successfully matching certificate to connect, all others should be rejected.

  Concerning

  Øystein

  Hi Øystein

  You can by mapping all users to a group that does not have a connection, for example:

  internal DenyAccess group strategy

  Group Policy attributes DenyAccess

  VPN - concurrent connections 0

  tunnel-group NoAccess type remote access

  tunnel-group NoAccess General attributes

  Group Policy - by default-DenyAccess

  crypto ca certificate map mymap 65535
  
  subject-name ne ""
  
  webvpn
  
  certificate-group-map mymap 65535 NoAccess
  hth
  
  Herbert
  

• Error - certificate does not match the profile: the default keychain is not a corresponding identity

  Hello

  Building our iOS app, but make that mistake every time.

  I have regenerated all the CERT signing request, all the way to the p12 file, but still get the same error.

  The "You can fix this link here" goes to https://docs.build.phonegap.com/en_US/support_failed-builds.md.html#cert_profile_mismatch , which never loads.

  I really need to get this built, so would appreciate any help available.

  Thank you.

  -Evan

  You also regenerate your provisioning profile? This sounds like the configuration profile does not contain the certificate that you downloaded.

• vRA: certificate does not appear to extend to the port 5480

  So it is perhaps yet another silly question but I can't find a good answer, so I'll just ask.

  vRA 6.2, certificate of our company CA, cert SAN with all of the individual (short and FULL domain name) DNS names, IP addresses and the name of VIP and IP. 443 regular cert appears fine. When you go to: 5480 the self-signed is shown. Thus, when the installation of IaaS starting on the first page of "Connection device information" certificate, he wants me to accept is the self signed (host device name shows as the < FQDN of the VIP >: 5480).

  Y at - it something I need to fix somewhere or the VAMI uses simply not cert?

  Hi Rebecca,.

  I promise a post on this sorry... did not actually.

  The short version... VAMI currently works to lighttpd. As such it does not use the same certificate as the vRA Web application store.

  Instructions to replace the VAMI cert are here:

  http://pubs.VMware.com/vCAC-61/index.jsp?topic=%2Fcom.VMware.Vcac.install.doc%2FGUID-E6515C12-61DA-4F67-8F44-C740B778743B.html

  Grant

• root.nextFrame does not

  Is anyone know why the code

  on (release) {}

  root.nextFrame (5);

  }

  would not work? It's a button and for some reason it does not work on an image?

  Thanks for your help!

  In AS2, it's "_root" and nextFrame() accepts no arguments, there is no that it is said, goes to the next section in the timeline panel.  If you want to go to the framework 5 and frame 5 is not the next image, then you must use gotoAndStop (5).

• Root folder does not exist

  After not doing any kind of work on my site for several months, that I'm now an error message telling me that my file root does not exist, but there is no... Oh on my desk where I left him... I'm looking right at it.

  What's up with that and how to fix it?

  I would start by going to the management of your site, change the entry for this site and then navigate to the folder that currently keep you in the site. For sites that I store on a network drive Dreamweaver sometimes "forget" where the folder is - maybe this happened to your site kind of definition.

• Regeneration of vCenter device certificate does not

  I'll put up a new vCenter Server Appliance and for some reason that the function of regeneration of certificate is not up-to-date certificate with the new host name and of the period of INVESTIGATION.

  I toggle regeneration of certificate of 'Yes' to reboot the device, I can see during startup until a line specifies that 'hostname has changed... regenerating SSL certificate', no errors I see appear.

  However, after that, I connect to the web console to https://x.x.x.x:5480 and verify the certificate and there always localhost.localdom the original DHCP assigned IP so the cert address has not changed!

  How can I get a new cert to regenerate?

  Thank you

  OK, so I just found this discussion here: http://communities.vmware.com/thread/447770 about 5.1 update 1 has suspended to regenerate the certificate after the reboot.  The user could get past the issue of hanging of manually generating the certificate from the command line.

  While I wasn't the problem with the suspension he had, I was able to follow the procedure for manually generating certificates.  It worked great and my cert now matches the host name.

  Not sure what is causing my problem, but this seems to have done the trick.

• root password does not work after upgrade to ESX4.0

  Dear all,

  I have a very strange problem, when I upgraded one of my host of U2 3.5 ESX to vSphere 4.0. After the upgrade when it has restarted, the root password has not worked at all. I used hot update utility to upgrade from this host.

  I even reset the password in single user mode, but it still won't take the password. Everyone has faced this thing before, is it possible this?

  Thank you.

  Nick

  Hello

  I have experienced this problem, IIRC it was the subsystem of PAM pointing to Active Directory first in the sequence auth process.

  Other user passwords work?

  Kind regards

  Mike

  http://blog.laspina.ca/

• How to configure root level does not

  iMac OS X Yosemite v.10.10.5

  I have heard many of disk grinding noises lately when I do almost nothing on my iMac. I just checked CPU usage via the activity monitor, and nothing jumps, except that a process of root level called the Setup program is "not responding"-, but it uses only 0.1% of CPU. Questions...

  Should I leave this process? I really don't like to leave a process when I don't know what he does, especially when it is owned by root.

  This could be responsible for grinding noise hard drive? If this is not the case, what should I look for? And I would be concerned that no matter the noise? Recently, it seems almost always present.

  TIA,

  Beth

  Not a reboot fixes the process "not responding"?

  The constant disk access could be Spotlight. See this thread disable spotlight super slow indexing after update to Lion?

• How can I set up email when the field on the SSL certificate does not match?

  I am a customer of Dreamhost and don't know if our situation is unique or not, but both smtp and imap are "mail.example.com" even if the SSL certificate belongs to ' *. DreamHost.com'.

  I was not able to set up the email on my flame app because I get the following error:

  > Could not establish a connection with "mail.example.com". There may be a problem with your network or server.

  I think the problem is the lag of domain name, but I can't find a way to accept the certificate.

  Hello!

  According to the official DreamHost wiki site , you can try this (cut-and-pasted from the page). If it doesn't work, there are still other options available on the page.

  To connect to the mail server using the name of the server dreamhost.com instead of messagerie.votre_domaine.fr.

  Use the following steps to determine the name of the server to use:

     In the DreamHost Control Panel
     Click "Account Status" in the upper right hand corner
     Look for the "Your Email Culster:" at the bottom of the list.
     Find your cluster in the table below.
     Use the server name for the incoming server in your mail program.
  

  Name of Server Cluster e-mail
  homiemail-sub3 sub3.mail.dreamhost.com
  homiemail-sub4 sub4.mail.dreamhost.com
  homiemail-sub5 sub5.mail.dreamhost.com
  homiemail-master homie.mail.dreamhost.com