Root folder does not exist

Similar Questions

• Error when changing the name of the folders-"file or folder does not exist.

  Original title: I can't rename my files
  I can't rename my folder in windows vista. "It gives me this error" the file or folder does not exist "and I can't cut/past this files.

  I do not use any unillgel characters such as. and / and...

  Hello

  Run the diagnostic tool for the article mentioned below to resolve this issue:

  "The file or folder does not exist" error in Windows Vista:
  http://support.Microsoft.com/kb/949109

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Cannot run the script at line 1. File or folder does not exist. »

  Whenever I have start AfterEffects, I get an error as he is looking to find my recent projects.  The error is as follows: "unable to run the script at line 1. File or folder does not exist. "I haven't changed the location in one of my project files.  It's the same external drives that I use for months.  When I click on OK the same window opens several times and then finally the historic window opens completely blank and empty.  I am able to reopen projects however since the RECENT PROJECTS drop in the top bar.  It is a very strange and disturbing behavior.  In addition, I always use 13.7.2 because when I go to update it is impossible to connect and gives me this error.  I sat with Adobe support for an hour today, and we couldn't understand.  As I am in the middle of major projects, I decided to not update, but this error at startup is very worrying.  Someone has an idea of what could go wrong or how I can fix this?

  Thank you very much for your time.

  -Fredo

  

  Ok!  Just got a response and an Adobe technical support solution.  The problem is that there is a problem with these versions of sequels (and I found the same problem in first to my horror this morning as well!) and the last couple Mac OSs.  The solution is to close the window "library".  It is then normally.  Apparently they fixed in the last update, but I found the same problem on my second computer, which has been updated.  Anyway, if anyone has this problem, close your cc library window.  Voila.

• ExtendScript: Could not perform the Action, because the destination folder does not exist

  "Adobe Photoshop (CS 6 on mac): use Extendscript (below) to convert in a .png .psd file size.

  "Save for web error: could not perform the Action, because the destination folder does not exist. Can anyone help?

  I am trying to convert the image size of a record of entry into an output folder:

  #target 'photoshop '.

  var outputWidth = 1024;

  var inputFolder = Folder.selectDialog ("input file");

  var outputFolder = Folder.selectDialog ("output folder");

  If (inputFolder! = null & & outputFolder! = null) {}

  var file = inputFolder.getFiles ("*.psd");

  for (var i = 0; i < files.length; i ++) {}

  var file = files [i];

  var doc = app.open (leader);

  If (doc.width > outputWidth) {}

  var height = (doc.height / doc.width) * outputWidth;

  doc.resizeImage (outputWidth + "px", size + "px");

  }

  var options = new ExportOptionsSaveForWeb();

  options.format = SaveDocumentType.PNG;

  Options. PNG8 = false;

  doc.exportDocument (outputFolder, ExportType.SAVEFORWEB, options);

  doc. Close (SaveOptions.DONOTSAVECHANGES);

  $.writeln('File ' + (i + 1) + "" + files.length + "transformed");

  }

  }

  I added a few comments, I hope this helps...

  #target "photoshop"
  var outputWidth = 1024;
  var inputFolder = Folder.selectDialog("Input folder");
  var outputFolder = Folder.selectDialog("Output folder");
  var startRulerUnits = preferences.rulerUnits;
  //make sure you are working with pixels
  preferences.rulerUnits = Units.PIXELS;
  if (inputFolder != null && outputFolder != null) {
      var files = inputFolder.getFiles("*.psd");
      for (var i = 0; i < files.length; i++) {
          var file = files[i];
          var doc = app.open(file);
          if (doc.width > outputWidth) {
              var height = (doc.height / doc.width) * outputWidth;
             /*  doc.resizeImage(outputWidth + "px", height + "px"); */
             //only one value is required
              doc.resizeImage(outputWidth, undefined, undefined, ResampleMethod.BICUBICSHARPER);
          }
          var options = new ExportOptionsSaveForWeb();
          options.format = SaveDocumentType.PNG;
          options.PNG8 = false;
          //get the filename without the extension
          var Name = app.activeDocument.name.replace(/\.[^\.]+$/, '');
          //build up the output file name and path
          var saveFile = File(outputFolder + "/" + Name + ".png");
          //you need to have a full filepath not a folder
          doc.exportDocument(/*outputFolder */saveFile, ExportType.SAVEFORWEB, options);
      doc.close(SaveOptions.DONOTSAVECHANGES);
          $.writeln('File ' + (i + 1) + ' of ' + files.length + ' processed');
      }
  //restore ruler units
  app.preferences.rulerUnits = startRulerUnits;
  }
  

• I get (this dose of file does not exist) when you name a new folder, why?

  Whenever I have add a new folder and try to name it, it's for me a sign that says, this dose of folder does not exist.
  On most of my files already on my computer I can rename them. I can not just quote new.
  I went to my registry with the help of Microsoft information, but nothing helped.

  See these if they could help:

  ""The file or folder does not exist"error in Windows Vista:
  http://support.Microsoft.com/kb/949109

  Cannot rename or move a file or folder in Vista Fix
  http://www.Vistax64.com/tutorials/130137-cannot-rename-move-file-folder-Vista-fix.html

• backup completed, but files were ignored: file does not exist

  When I run the Backup on my Win7Pro/64, I always get a warning at the end, saying:
  'Backup has not completed successfully', and when I click on the button options, I get the following:
  "The backup completed, but some files were ignored.
  And when I click on view the ignored files, I get:
  "Backup has encountered a problem during backup of the C:\Users\MyAccount\Desktop file. Error: (the system cannot find the specified file. (0 x 80070002)) »

  And indeed, this folder does not exist, as my profile files have all been transferred to another drive. So why always backup tries to back up this folder that does not exist?
  I would like to get rid of this error, b/c I always fear that these strange symptoms could hide a more serious problem (like my records real user not be backed up correctly...)

  Hello

  Follow the steps from the article below to solve the problem.

  
  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Unable to display the remote folder: the remote folder F:/wamp/www / "MYWEBSITENAME" / is not accessible or does not exist.

  In CS4, all of a sudden, I get the error "unable to display the remote folder: the remote folder F:/wamp/www /"MYWEBSITENAME"/ is not accessible or does not exist.»

  I'm in Manage Sites and test the file in the remote folder and it says "Dreamweaver connected to your web service successfully.

  I have not changed anything.  I had this once before a few years ago and just copied on the site of a new name and that fixed it, but it does not for the moment.

  Help.   Any ideas?  Thank you

  When you click the expand button in your files window, whose icon is selected in the upper part?

  

  The middle one is the test server (list of lightning bolt), if you try to download, you will need to switch to the remote server (standard search bullet list icon).

  If you do not have a local server running on a drive of F, and you try to put it on the test server, you will get an error saying: there is no. Is it happening?

  If you do not have a local server running on your F drive, remove the test server info, it is not necessary.

• The WCChromeExtn file does not exist in the Acrobat folder, so that I can't use the extension of the conversion of PDF in Chrome.

  I installed Acrobat Pro 11.0.10. The WCChromeExtn file does not exist in the Acrobat folder, so that I can't use the extension of the conversion of PDF in Chrome.

  I do not know how to find this file, but it worked after the repair! Thank you.

• create new folder, but the path does not exist.  That's why I need to create!

  I want to take their existing case files, wallpapers and move them into a new catalog LR, jpg_edits.  In the import window, I left click on the parent, my photos and get 'create a new folder '. After which a new folder creation box opens to display the ms mode my file Explorer and the parent.  But he says to Select a folder, so when I try to type the new name, they tell me the path does not exist.  Which may be the reason I'm trying to create the new folder.  Everything seems to be able to do is to slect the existing folders.  Where is the creation of a new part of catalogue record?

  If I understand the question, you want to create a new destination folder in an existing parent folder. Fix? Once you click the folder parent in the Destination panel (left side of the screen to import), expect the top of the Destination table. You will find two elements here. The first, in the subfolder, allows you to enter the name of the new subfolder to create but it must ensure that the box is checked. Select the check box and enter the name of the file in the text field. Then, select the option in a single folder drop-down organizing. With these options, you will see a new subfolder in the tree under your (grey) selected parent folder. Even once all this is done on the right side of the screen to import.

• Error 1327.Invalid Drive: G:\ mapped to a user folder. The drive does not exist or could not be conn

  Error 1327.Invalid Drive: G:\ mapped to a user folder. The drive does not exist or could not be connected. You can disconnect the drive or reassign the drive letter. For details see http://kb2.adobe.com/cps/404/kb404946.html

  Hi jamal d w,.

  Please see the KB Doc to install error 1327. "Invalid drive" | CS4, CS5, Acrobat Reader | Windows - ive.html http://helpx.adobe.com/creative-suite/kb/install-error-1327-invalid-dr which explains how to solve your current problem.

• The root of the oracle/jpub/runtime/dbws/DbwsProxy class does not exist

  Hello
  
  I am using UTL_DBWS to call a Web service and get an error "ORA-29540: oracle/jpub/runtime/dbws/DbwsProxy of class does not exist"
  
  his back and forth between me and operations, I have aske to load the package, but still the script fails. Is it possible to confirm if the package is loaded, as the script below
  
  as sys:
  Select the State of the object where
  dbms_java.longname (parameter) = "oracle/jpub/runtime/dbws/DbwsProxy";
  
  Please help to find the root cause

  Please check if you have subsidies on UTL_DBWS.

• After the upgrade from my bookmarks list shows the entries less than before; the indications you have search a Profiles folder that does not exist.

  After Update Firefox on all November 9, I lost the list of bookmarks that I had before and it could access it from my homepage. Now it does not appear there. When I followed the instructions on your mozillazine.org help page, it says to find a profile file that does not exist with this version.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file
  • http://KB.mozillazine.org/Lost_bookmarks

• P1 (or FOLDER #) in v$ session_wait does not exist

  I question the V$ SESSION_WAIT to the event "buffer expects busy", but the parameter P1, which is the FILE # does not exist when he is interviewed in DBA_DATA_FILES or DBA_TEMP_FILES. Why is it so? Am I missing something? Help, please.

  Note: I'm not fall nor did I drop any tablespace.

  Our Oracle version is 11 GR 2.

  "" SQL > select event, p1 "file #", p2 "Block #", p3 "reason Code", wait_class of v$ session_wait

  where event = "buffer expects busy."

  EVENT file # block # WAIT_CLASS reason Code

  ------------------------------ ---------- ---------- ----------- ------------------------------

  buffer busy waits 1033 2 13 Concurrency

  buffer busy waits 1033 2 13 Concurrency

  buffer busy waits 1033 2 13 Concurrency

  SQL > select * from dba_data_files

  2 where file_id = 1033;

  no selected line

  SQL > select * from dba_temp_files

  2 where file_id = 1033;

  no selected line

  For temporary files, you will need to subtract the value of the parameter db_files since the reported file # to obtain the file_id reported in dba_temp_files.

  Concerning

  Jonathan Lewis

• Unable to join the domain "DNS name does not exist."

  Working on this computer remotely in my company, it has more a problem but at this moment, that we focus on trying to reach the area. We removed everything first to see if it would fix the trust relationship issues she felt the long side not being able to browse the files all computer network or servers.
  When trying to join the field, that's what we get in the dcdiag.txt in the debug folder.
  The domain name 'xxxxx' can be a NetBIOS domain name.  If this is the case, check that the domain name is properly registered with WINS.
  If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
  The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for the domain "xxxxx":
  The error was: "the DNS name does not exist."
  (0x0000232B RCODE_NAME_ERROR error code)
  The query was for the SRV record for _ldap._tcp.dc._msdcs.xxxxx
  Common causes of this error are:
  -The DNS SRV records to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
  198.6.1.5
  198.6.100.38
  -One or more of the following areas do not include delegation to its child zone:
  XXXXX
  . (the root zone)
  XXXXX = domain
  Also the listed IP addresses have been changed.
  
  
  I worked on this computer for about 2 days, and then the user is able to work remotely with a server terminal server, they will need access to the server later.

  Reset the network device - completely.  Uninstall the network driver and have someone there install the latest manufacturer.

  Manually enter the DNS information for the DNS servers of your company on the computer - even if it uses DHCP.

  Make sure that its time/time zone is the same as your DNS server.

  Reset all default HOSTS file.

  Ping the DNS server.

  When you join - use the FQDN (mycompany.local, etc..)

• Please help about the FRM-47023 - parameter does not exist in form

  Dear all,
  
  Best wishes...
  
  I'm currently doing some additions to existing forms.
  
  in fact, I have two forms, form and b. (form A) based on the tables and B form based on table B
  
  Existing scenario.
  
  Formula A-> table A contains the columns as
  
  A1Col1 - Primary key
  A1Col2 - Primary key
  A1Col3 - Primary key
  A1Col4 - Primay key
  A1Col5
  A1Col6
  
  Form B-> table B
  
  B1Col1 = A1Col1
  B1Col2 = A1Col2
  B1Col3 = A1Col3
  B1Col4 = B1Col4 (this is newly added column in TableB and form present I do not have this relationship, so I
  Add an element of text in form B and made it point to databases and give the coloumn name)
  B1Col5
  B1Col6
  
  
  Existing features:
  
  Form A is the main form and there is a button pressed, it will pass (A1Col1 parameters
  A1Col2, A1Col3 to the B shape based on what form B will ask details.
  
  Existing for this push in FormA button code is:
  

  DECLARE
  
    pl_id   ParamList;
  
    pl_name VARCHAR2(15) := 'ls_parm_list';
  
  BEGIN
  
    if :TableA.A1Col1 > ' ' and
  
       :TableA.A1Col2 > ' '   and
  
       :TableA.A1Col3 > ' '    and
  
       :TableA.A1Col4 > ' '     then (-- (newly added line for current requirement)
  
  
  
        pl_id := Get_Parameter_List(pl_name);
  
   
  
        if NOT Id_Null(pl_id) then 
  
            Destroy_Parameter_List(pl_id);
  
        end if;
  
  
  
        pl_id := Create_Parameter_List(pl_name);
  
  
  
        Add_Parameter(pl_id,'A1Col1',TEXT_PARAMETER,:TableA.A1Col1);
  
        Add_Parameter(pl_id,'A1Col2',TEXT_PARAMETER,:TableA.A1Col2);
  
        Add_Parameter(pl_id,'A1Col3',TEXT_PARAMETER,:TableA.A1Col4);
  
        Add_Parameter(pl_id,'A1Col4',TEXT_PARAMETER,:TableA.A1Col3); -- (newly added line for current requirement)
  
        Add_Parameter(pl_id,'A1Col5',TEXT_PARAMETER,:PARAMETER.UID);
  
  
  
        NEW_FORM('FormB',TO_SAVEPOINT,NO_QUERY_ONLY,pl_id);
  
    end if;
  
  END;

  Code for the new instance of the form to FormB:
  

  DECLARE
  
    W_WHERE VARCHAR2(100);
  
  BEGIN
  
    if :PARAMETER.Param1 > ' ' then 
  
        W_WHERE := 'B1col1=''' || :PARAMETER.param1 || ''' AND B1col2=''' || :PARAMETER.param3 || ''' AND B1col3 =''' || :PARAMETER.param4 || ''' AND B1col4=''' || :PARAMETER.Param4 || '''';
  
  
  
        Set_Block_Property('TableB',DEFAULT_WHERE,W_WHERE);
  
  
  
        execute_query;
  
  
  
        Set_Block_Property('TableB',DEFAULT_WHERE,'');
  
    end if;
  
  
  
    :SYSTEM.MESSAGE_LEVEL := 25;
  
  END;

  So now,.
  
  New features:
  
  I need to spend an additional column in TableA (A1Col4) also a parameter to form B so that it will be in the where clause of the form B.
  
  To achieve this requirment,
  
  Step 1:
  
  Step 1: I added B1Col4 to TableB because it did not exist before.
  
  Step 2: I added a text element in FormB, named as "A1Col4" and set its property to iterm Yes to Database and columname to A1Col4.
  
  And then I created a setting called "' A1Col4" to FormB (this iis since I added a new setting FormA pressed button code above)... ".
  
  Now, the real problem I am facing:
  
  I have compiled the forms, and it went well... I ran the FormA... Here are the scenarios:
  
  1. formA is running and when I run the query, it performs gets data, when press the button go form B (to all 4 parameters to formb, I get error. FRM 47023 No. such parameter named A1col4 exists in FormB. even though I have the parameter b form created recently with this name.
  
  2. so I just kept the existing code button pressed (commented on newly added lines, keeping the 3 parameters instead of 4) and removed "' AND B1col4 =" ' | : PARAMETER. Param4 | "' from the whennewform code instance formb, the result is: FormA call FormsB successfully, FormB is to be opened, BUT VERY STRANGE, THAT NEWLY ADDED POINT (COLUMN TABLEB THAT I wanted TO PASS ADDITIONAL PARAMETER FROM FORM 'A') IS MISSING. This text element appears not.
  
  
  3. If I run FormB alone, then it is querying data, the newly added text element is also displayed but if if I have the same call FormA, error FRM-47023.
  
  I sat for hours and hours to find out what exactly the problem... but no clue...
  
  Sorry for the long post... but in hope and who seek the help of our friends from the OTN network...
  
  Hope that I have explained clearly the problem... By the way that the version is 10G forms.
  
  Thanks for the help in advance for everyone...
  
  Kind regards
  Prasanth

  they are in the same folder

  If you're on 10G, being in the same folder does not mean automatically that the forms be made on this issue. In your EPS file, there is a parameter named FORMS_PATH, forms are searched for in directories listed there. To verify your env file. also, you could search the entire disk by issuing a

  dir formb.fmx /s
  

  from the root directory of your disks.