Not allowed to connect to the virtual machine after archive / installation of the Tiger

Similar Questions

• Avoiding PC not allowed to connect to the wireless network

  AA: For wireless in our establishment, we have access Points on all floors that are in turn connected to the main server PC.
  When I opened the "wireless network connection state", click 'Wireless properties', then select 'Security', it shows the following:
  Security type: no authentication (Open)
  Encryption type: WEP
  Network security key *.
  When the "Show characters" checkbox is selected, it shows the "network security key.
  Is it possible that this security key can be hidden and therefore not visible at all. This avoids computers are not allowed to connect to the network.
  All PCs are loaded with windows 7.
  BB: All PC's are connected WIFI and their IP 192.168.1.100 to 120 with the subnet mask 255.255.255.0 range
  I need to connect some of the connected WLAN PC also by a connection to the local network for networking with a Satellite Communicator for internet connection.
  Setting regarding address LAN IP for the PC, I can give them the same IP from 192.168.1.121 to XXX or if IP address
  address be 192.168.0.xxx
  Adv. kindly

  Change in WPA2.
  Put a password on that isn't easy to guess and is greater than 8 characters.
   
  The security key you are watching is on your computer - you have entered it or allowed him to be registered.  Except if you give someone access to that computer (or a similar) they will not be able to get to this part of the system to see what you see.  If you give people access to the use of these systems, do not give them administrative access - they must only use computers as * users *.

• Studio of Financial Reporting does not allow to connect to the Essbase Server

  Hi all

  I installed 11.1.2.2 studio HFR (32 bit installed via the workspace) on my machine, and then you be connected in the Studio.

  When I try to create the Essbase inside connection, it throws me following error:

  "Unable to connect to the server.

  "Connection to the database connection login error: error: error getting CSS support for driver [com.hyperion.ap.aps.Driver] information".

  An idea to solve this problem.

  I tried following, but it's also not helping:

  -Run the command HRRunAnt.cmd script in the directory "D:\Oracle\Middleware\EPMSystem11R1\products\FinancialReportingStudio\products\financialreporting\install\bin".

  After installation

  Best regards,

  Amit Porwal

  Check these https://support.oracle.com/epmos/faces/DocumentDisplay?id=1504806.1&displayIndex=1

  https://support.Oracle.com/epmos/faces/DocumentDisplay?ID=1300530.1&DisplayIndex=2

  We first applies if EN is on 64 bit OS that you can ignore.

  Secondly, we are talking about a corrupted file admaps.jar, see if you can get one from a working environment.

  Concerning

  Celvin

• Not able to connect to APEX Administration Services after new installation

  Hello

  I installed oracle database 11g (11.2) and apex 4.2.3 in my laptop.  I did all the steps and now I'm at the stage

  "Create a workspace and add users of the Oracle Application Express".

  When I'm starting to apex, I get just blank page.  Don't know what the problem is.  If anyone can help.

  http:// localhost : 8080 apex_admin/apex/apex_admin

  There's no problem in logging into Oracle.  I faced a problem when setting up "Embedded PL/SQL gateway.  Not sure if this causing issues while opening apex.

  . Loading images directory: C:\Anand\APEX\apex_423\apex\images

  Created directory.

  declare

  *

  ERROR on line 1:

  ORA-22288: file or LOB FILEOPEN operation failed

  The system does not have the specified path.

  ORA-06512: at "SYS." XMLTYPE", line 296

  ORA-06512: at line 16 level

  PL/SQL procedure successfully completed

  Thank you and best regards,

  -Anand

  Hi Jariola,

  Don't know why my my configuration of the embedded PL/SQL gateway failed after repeated tests.

  I uninstalled APEX completely and then kept my "apex" installation folder under "c:\temp".  Then run under-

  @apex_epg_config.sql C:\temp

  This time he succeeded without any problem.  I am now able to connect to the apex

  The only change is the folder when I kept my installation of apex.  Earlier, it was "C:\Anand\APEX\apex_423" and now "c:\temp\apex".

  Platform

  APEX version: 4.2.3.00.08

  DB version: 11g Release 11.2.0.1.0

  Web server: EPG

  System operating system: Business Windows 7 64 bit

  Browser (s) / version (s): Google Chrome: version 31.0.1650.57 m

  Thanks to all who tried to help.

  Kind regards

  -Anand

• Unable to connect to MKS: virtual machine configuration file does not exist

  Guys,

  Need a little help I'm running the following

  vCenter Server 4.0.0 (build 208111)

  ESX Server 4.0.0 (build 208167)

  I have a computer virtual running WIndows 2000 Advanced and when I try and open the console I get a black screen and the error message following

  "" Unable to connect to MKS: virtual machine configuration file does not exist '. "

  I scoured the data store and all the files of the virtual machine appear to be in place, I thought deletin the virtual machine from the inventory and add the vmdk file, it would be a good idea?

  Thank you.

  Remove and add new inventory won't hurt (you could lose data historial for virtual machine), it probably won't solve the problem.

  I doubt, it is a problem with the .vmx file, but you can try:

  -Remove the VM of the inventory

  -To create the new virtual machine (with the same characteristics as the virtual machine that you removed), name it differently and do not add hard drives that it

  -Change the new VM settings and add the existing VMDK virtual machine that you deleted

  -Power on VM and try

  • You should always have your complete file to the virtual machine original intact, in case you need, you will always have your original vmx file to add it to the inventory.

  By doing these steps you re-create the vmx file.

  f this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• The host CPU is not able to run 64-bit virtual machines

  I am running VMWare Server Console on a Windows 2003 64 bit OS 1.0.3 and prepare to create a 64-bit VM server to test a new application on.  This forum server works on is a SuperMicro SuperServer 6025 B - TR +.  I entered the bios and activated the virtual bios in the CPU settings.  However, when I start my VM, I get the following error:

  «You have configured the virtual machine as an operationg system 64-bit client.»  However, this host processor is not able to run 64-bit virtual machines or this virtual machine has 64-bit support disabled.

  I looked online and saw some references to allow an EM64T which was to be activated but I do not see this option in my BIOS.  Someone at - it any other suggestions as to what I have to do to get the virtual machine to use the 64-bit compatibility.

  Unfortunately, the 1.x server logs are a little sparse in this regard.  However, it seems that you have mixed steppings of physical processors.  In this range of models, Intel changed the VMCS review between the Bx steppings and Gx steppings ID, making it incompatible for the execution of VT - x.  Realizing their mistake, Intel has provided to OEMS for a microcode patch that makes the revision ID the Gx stepping VMCS matches that of the Bx stepping.  OEMs distribute this patch of microcode as a BIOS update.

  In short, an update of the BIOS of your system provider should solve the problem.

• Cannot RDP into virtual machine after the reboot

  Hi all

  I use VMware ESXi4.0

  I'm having a problem where if I reboot a virtual machine, once it restarts I try to use the Remote Desktop Connection Manager to access and receive this error:

  "The connection cannot be completed because the remote computer that has been reached is not the one that you specified.  This could be caused by an outdated entry in the DNS cache.  Try using the IP address of the computer instead of the name. »

  The current machine I noticed the error is Windows 7 but also for me Server 2008.  not sure if this relevant.  I can still access the machine through vSphere, but not Remote Desktop.  When I ping the name of the machine as well as IP address, they both similar deadlines.

  I checked my DC for dns entries, and they are there for this computer as well as in the reverse lookup zones.  I tried to do a/flushdns and / registerdns on the virtual machine.

  I would usually have for this problem to connect to vSphere virtual machine, then RDCM is there to connect.

  I saw another post on this topic in the forum, but he had a solution. This post is here > http://communities.vmware.com/message/1304004

  I tried the recommendations here and they did not help.

  Any ideas on what I can try?

  Thanks in advance,

  John

  Here's the update to which I was referring... He had to be reissued in June because of the problems that it caused on some systems.

  http://support.Microsoft.com/kb/2667402

  But, if you are able to connect via IP, then the RDP patch will probably not help.

• How to connect to a virtual machine remotely.

  How to connect from my PC (windows xp) homepage to my PC(windows xp) desktop with a virtual machine.

  I want to connect to this virtual machine from home. How to do this? What are the steps?

  Thank you.

  Hello

  When you configure the virtual computing, r put his network card to use the host adapter.

  In this way, the virtual machine will get the IP address of the router and will basically act as if the Chickadee is an independent computer in the network.

  As long as the host computer and the virtual computer on and don't go to sleep, you can connect to each on its own through the network.

  or on the Internet.

  http://www.Microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Not able to connect to the essbase server: error 10061 NW

  Hi all

  I am currently working on Hyperion 11.1.2.3 and have installed Hyperion essbase and planning for the same thing. Until a few days back I was able to connect to my server essbase in environmental assessments, but now it gives me error that says: error: 1042006: Network error [10061]: unable to connect to [WIN - 1K6GBOF63C0:1423], where WIN-1K6GBOF63C0 is my machine name.

  Here is an excerpt of what I got from the newspapers essbase

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051283)

  Recovery of license information, please wait...

  [Sun Jul 12 00:26:50 2015] Local/ESSBASE0 / / / 4800/Info (1051286)

  The license retrieved information.

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1051227)

  No JVM location specified in essbase.cfg. Will attempt to load the library path

  [Sun Jul 12 00:26:51 2015] Local/ESSBASE0 / / / 4800/Info (1311019)

  During the initialization of the JVM classpath: [; C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar; C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051223)

  Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: getInstance: impossible to get the instance of CSSSystem, please visit SharedServices_Security_Client.log for more information]

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051198)

  Single Sign-On initialization failed!

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1056815)

  Essbase 64-bit - version 11.1.2 (ESB11.1.2.3.000B4412)

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Info (1051232)

  Using English_UnitedStates.Latin1@Binary as the locale Essbase

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051683)

  Try to recover the login information from the registry failed. Please check the reg.properties file, and then try again.

  [Sun Jul 12 00:26:53 2015] Local/ESSBASE0 / / / 4800/Error (1051527)

  Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.

  I am able to open the workspace's shared services, but see the following in the Sharedservices_securityclient log

  [2015 07-12 T 00: 26:41.418 - 07:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A6jgDwW05zzWByW1LcXQY000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] failed to initialize the instance security EMP of Shared Services. Component marchandises9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is set to null in the EMP system registry. Check the configuration of the EMP system registry.

  [2015 07-12 T 00: 28:51.332 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:51.403 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20002] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.EPMSystem] [SRC_METHOD: getInstance] instance of security during the initialization of the SSP using the EMP system registry. It is a status messages. No action required.

  [2015 07-12 T 00: 28:52.340 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.184 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20001] [oracle. EPMCSS. CSS] [tid: 10] [ecid: 0000Ku1A ^ KEDwW05zzWByW1LcXSR000000, 0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] access to the EPM system registry has been initialized properly. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.606 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20005] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] started asynchronous user directory cache building user native Directory directory. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20007] [oracle. EPMCSS. CSS] [tid: 12] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0:3] [SRC_CLASS: com.hyperion.css.cache.ProviderCacheThread] [SRC_METHOD: run] group cache filled to the user native Directory directory and the size of the cache of the group is 1. Status message. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20331] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] building Cache is for providers, has now begun to unify the cache. It is a status messages. No action required.

  [2015 07-12 T 00: 28:53.723 - 07:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20332] [oracle. EPMCSS. CSS] [tid: 11] [ecid: 0000Ku1AeZlDwW05zzWByW1LcXSR000002, 0] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] unify done cache and the object is set to the cached cache manager. It is a status messages. No action required.

  Any help is appreciated here.

  Thank you

  Dev

  The error being generated using relates to Essbase is not able to connect to the registry of SSP database, or the database is corrupt.

  Are a set of services to automatic, maybe that the database has not increased and running prior to Essbase trying to boot against the register of Shared Services.

  Confirm the relational database is finally up and running and you can connect, then clear the Essbase logs, start Essbase, and post again the same newspapers.

  See you soon

  John

• "Save as" box pop up does not allow me to save the document.

  Hello

  "Save as" box pop up does not allow me to save the document. Displays a white screen. No idea what would cause this? I bought acrobat pro dc.

  Thank you!

  Found this solution:

  The default "Save as" dialog Acrobat DC is different from the dialogue box you had in earlier versions of Acrobat, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

• Application is not able to connect using the Oracle SCAN chain

  Dear Oracle gurus
  
  We have 11g r2 11.2.0.3.0 2 cluster nodes
  
  We have configured the scanning using scan-vip single using/etc/hosts file resolution
  
  Our app to work correctly using the string of double local Vip (10g method)
  
  Scan works very well in the database server when we check using sqlplus
  
  Works very well in the database server Oracle SCAN
  
  Sqlplus DB - 1 test bench / testbed@my-db-scan:1521 / orcl
  
  When we use it below URL JDBC in Tomcat Version-6 then "doesn't allow not to connect even if there will connect a while but connectivity isn't stable when we reboot the tomcat"
  
  Hibernate.Connection.URL=jdbc:Oracle:Thin:@My-DB-Scan:1521/ORCL
  
  Application is not able to connect using the Oracle SCAN chain
  
  [May 13, 2013 12:48:24] [INFO] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: init() Called.
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: adding the data manager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 1: com.cmp.mysm.hibernate.core.system.staff.HStaffDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 2: com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 3: com.cmp.mysm.hibernate.core.system.profilemanagement.HProfileDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 4: com.cmp.mysm.hibernate.core.system.accessgroup.HAccessGroupDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 5: com.cmp.mysm.hibernate.systemaudit.HSystemAuditDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 6: com.cmp.mysm.hibernate.datasource.database.HDatabaseDSDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 7: com.cmp.mysm.hibernate.datasource.ldap.HLDAPDatasourceDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 8: com.cmp.mysm.hibernate.sessionmanager.HSessionManagerDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 9: com.cmp.mysm.hibernate.sessionmanager.HASMDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 10: com.cmp.mysm.hibernate.digestconf.HDigestConfDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 11: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 12: com.cmp.mysm.hibernate.externalsystem.HExternalSystemInterfaceDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 13: com.cmp.mysm.hibernate.servermgr.drivers.HDriverDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 14: com.cmp.mysm.hibernate.servermgr.drivers.subscriberprofile.database.HDatabaseSubscriberProfileDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 15: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 16: com.cmp.mysm.hibernate.servicepolicy.auth.HAuthServicePoilcyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 17: com.cmp.mysm.hibernate.servicepolicy.acct.HAcctServicePoilcyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 18: com.cmp.mysm.hibernate.servicepolicy.dynauth.HDynAuthServicePoilcyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 19: com.cmp.mysm.hibernate.servermgr.server.HServerDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 20: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 21: com.cmp.mysm.hibernate.servermgr.plugin.HPluginDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 22: com.cmp.mysm.hibernate.rm.ippool.HIPPoolDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 23: com.cmp.mysm.hibernate.servermgr.eap.HEAPConfigDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 24: com.cmp.mysm.hibernate.servermgr.alert.HAlertListenerDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 25: com.cmp.mysm.hibernate.servermgr.gracepolicy.HGracePolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 26: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 27: com.cmp.mysm.hibernate.radius.dictionary.HDictionaryDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 28: com.cmp.mysm.hibernate.radius.policies.accesspolicy.HAccessPolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 29: com.cmp.mysm.hibernate.radius.policies.radiuspolicy.HRadiusPolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 30: com.cmp.mysm.hibernate.radius.radtest.HRadiusTestDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 31: com.cmp.mysm.hibernate.radius.bwlist.HBWListBLManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 32: com.cmp.mysm.hibernate.rm.concurrentloginpolicy.HConcurrentLoginPolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 33: com.cmp.mysm.hibernate.wsconfig.HWebServiceConfigDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 34: com.cmp.mysm.hibernate.diameter.dictionary.HDictionaryDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 35: com.cmp.mysm.hibernate.servicepolicy.diameter.naspolicy.HDiameterNASPolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 36: com.cmp.mysm.hibernate.servicepolicy.diameter.creditcontrolpolicy.HCreditControlPolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 37: com.cmp.mysm.hibernate.servicepolicy.diameter.eappolicy.HEAPPolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 38: com.cmp.mysm.hibernate.servermgr.drivers.HDiameterDriverDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 39: com.cmp.mysm.hibernate.servermgr.transmapconf.HTranslationMappingConfDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 40: com.cmp.mysm.hibernate.diameter.diameterpolicy.HDiameterPolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 41: com.cmp.mysm.hibernate.servicepolicy.rm.cgpolicy.HCGPolicyDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 42: com.cmp.mysm.hibernate.reports.userstat.HUserStatisticsDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 43: com.cmp.mysm.hibernate.diameter.routingconf.HDiameterRoutingConfDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 44: com.cmp.mysm.hibernate.diameter.diameterpeerprofile.HDiameterPeerProfileDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 45: com.cmp.mysm.hibernate.diameter.diameterpeer.HDiameterPeerDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 46: com.cmp.mysm.hibernate.core.base.HGenericDataManager
  [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
  [May 13, 2013 12:48:24] [INFO] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: Data Manager was initialized successfully.
  [May 13, 2013 12:48:29] [ERROR] [0.0.0.0] - unknown [CONFIG MANAGER]: error during the Configuration Manager operation, reason: failed to open the connection
  [May 13, 2013 12:48:29] [TRACE] [0.0.0.0] - unknown [CONFIG MANAGER] com.cmp.mysm.datamanager.DataManagerException: failed to open the connection
  at com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager.getList (HSystemParameterDataManager.java:45)
  at com.cmp.mysm.blmanager.core.system.systemparameter.SystemParameterBLManager.getList (SystemParameterBLManager.java:71)
  at com.cmp.mysm.web.core.system.cache.ConfigManager.init (ConfigManager.java:47)
  at com.cmp.mysm.web.core.system.servlet.myServlet.init (myServlet.java:27)
  at javax.servlet.GenericServlet.init(GenericServlet.java:212)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1206)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1026)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4421)
  at org.apache.catalina.core.StandardContext.start(StandardContext.java:4734)
  at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
  at org.apache.catalina.core.StandardHost.start(StandardHost.java:840)
  at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
  at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463)
  at org.apache.catalina.core.StandardService.start(StandardService.java:525)
  at org.apache.catalina.core.StandardServer.start(StandardServer.java:754)
  at org.apache.catalina.startup.Catalina.start(Catalina.java:595)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289)
  at org.apache.catalina.startup.Bootstrap.main (Bootstrap.java:414)
  Caused by: org.hibernate.exception.GenericJDBCException: failed to open the connection
  at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:140)
  at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:128)
  at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
  at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:52)
  at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:449)
  at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:167)
  at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
  at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1596)
  at org.hibernate.loader.Loader.doQuery(Loader.java:717)
  at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:270)
  at org.hibernate.loader.Loader.doList(Loader.java:2294)
  at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2172)
  at org.hibernate.loader.Loader.list(Loader.java:2167)
  at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:119)
  at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1706)
  at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:347)
  at com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager.getList (HSystemParameterDataManager.java:43)
  ... 21 more
  Caused by: java.sql.SQLException: an attempt by a client to fund a connection has expired.
  at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:106)
  at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:65)
  at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:527)
  at com.mchange.v2.c3p0.impl.AbstractPoolBackedDataSource.getConnection(AbstractPoolBackedDataSource.java:128)
  at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:78)
  at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:446)
  ... more than 33
  Caused by: com.mchange.v2.resourcepool.TimeoutException: a client has expired while waiting to acquire a resource of com.mchange.v2.resourcepool.BasicResourcePool@47503458--timeout to awaitAvailable()
  at com.mchange.v2.resourcepool.BasicResourcePool.awaitAvailable(BasicResourcePool.java:1317)
  at com.mchange.v2.resourcepool.BasicResourcePool.prelimCheckoutResource(BasicResourcePool.java:557)
  at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:477)
  at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525)
  ... 36 more
  
  May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDescriptor
  NEWS: Deployment descriptor configuration host - manager .xml
  May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDescriptor
  NEWS: Deployment configuration descriptor manager.xml
  May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
  NEWS: Deployment of the directory docs web application
  May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
  INFO: Examples of Directory deployment web application
  May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
  INFO: Deploy the web application ROOT directory
  May 13, 2013 org.apache.coyote.http11.Http11Protocol start 12:48:29 AM
  INFO: From Coyote HTTP/1.1 on http-8080
  May 13, 2013 12:48:30 AM org.apache.jk.common.ChannelSocket init
  INFO: JK: ajp13 listening on /0.0.0.0:8009
  May 13, 2013 12:48:30 hours departure from org.apache.jk.server.JkMain
  INFO: Jk running ID = time 0 = 0/15 config = null
  May 13, 2013 12:48:30 hours departure from org.apache.catalina.startup.Catalina
  INFO: Starting the server in 16222 ms
  
  Some time Tomcat to connect to the database*.
  [May 13, 2013 10:02:29] [INFO] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: init() Called.
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: adding the data manager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 1: com.cmp.mysm.hibernate.core.system.staff.HStaffDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 2: com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 3: com.cmp.mysm.hibernate.core.system.profilemanagement.HProfileDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 4: com.cmp.mysm.hibernate.core.system.accessgroup.HAccessGroupDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 5: com.cmp.mysm.hibernate.systemaudit.HSystemAuditDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 6: com.cmp.mysm.hibernate.datasource.database.HDatabaseDSDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 7: com.cmp.mysm.hibernate.datasource.ldap.HLDAPDatasourceDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 8: com.cmp.mysm.hibernate.sessionmanager.HSessionManagerDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 9: com.cmp.mysm.hibernate.sessionmanager.HASMDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 10: com.cmp.mysm.hibernate.digestconf.HDigestConfDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 11: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 12: com.cmp.mysm.hibernate.externalsystem.HExternalSystemInterfaceDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 13: com.cmp.mysm.hibernate.servermgr.drivers.HDriverDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 14: com.cmp.mysm.hibernate.servermgr.drivers.subscriberprofile.database.HDatabaseSubscriberProfileDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 15: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 16: com.cmp.mysm.hibernate.servicepolicy.auth.HAuthServicePoilcyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 17: com.cmp.mysm.hibernate.servicepolicy.acct.HAcctServicePoilcyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 18: com.cmp.mysm.hibernate.servicepolicy.dynauth.HDynAuthServicePoilcyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 19: com.cmp.mysm.hibernate.servermgr.server.HServerDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 20: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 21: com.cmp.mysm.hibernate.servermgr.plugin.HPluginDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 22: com.cmp.mysm.hibernate.rm.ippool.HIPPoolDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 23: com.cmp.mysm.hibernate.servermgr.eap.HEAPConfigDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 24: com.cmp.mysm.hibernate.servermgr.alert.HAlertListenerDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 25: com.cmp.mysm.hibernate.servermgr.gracepolicy.HGracePolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 26: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 27: com.cmp.mysm.hibernate.radius.dictionary.HDictionaryDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 28: com.cmp.mysm.hibernate.radius.policies.accesspolicy.HAccessPolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 29: com.cmp.mysm.hibernate.radius.policies.radiuspolicy.HRadiusPolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 30: com.cmp.mysm.hibernate.radius.radtest.HRadiusTestDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 31: com.cmp.mysm.hibernate.radius.bwlist.HBWListBLManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 32: com.cmp.mysm.hibernate.rm.concurrentloginpolicy.HConcurrentLoginPolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 33: com.cmp.mysm.hibernate.wsconfig.HWebServiceConfigDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 34: com.cmp.mysm.hibernate.diameter.dictionary.HDictionaryDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 35: com.cmp.mysm.hibernate.servicepolicy.diameter.naspolicy.HDiameterNASPolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 36: com.cmp.mysm.hibernate.servicepolicy.diameter.creditcontrolpolicy.HCreditControlPolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 37: com.cmp.mysm.hibernate.servicepolicy.diameter.eappolicy.HEAPPolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 38: com.cmp.mysm.hibernate.servermgr.drivers.HDiameterDriverDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 39: com.cmp.mysm.hibernate.servermgr.transmapconf.HTranslationMappingConfDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 40: com.cmp.mysm.hibernate.diameter.diameterpolicy.HDiameterPolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 41: com.cmp.mysm.hibernate.servicepolicy.rm.cgpolicy.HCGPolicyDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 42: com.cmp.mysm.hibernate.reports.userstat.HUserStatisticsDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 43: com.cmp.mysm.hibernate.diameter.routingconf.HDiameterRoutingConfDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 44: com.cmp.mysm.hibernate.diameter.diameterpeerprofile.HDiameterPeerProfileDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 45: com.cmp.mysm.hibernate.diameter.diameterpeer.HDiameterPeerDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 46: com.cmp.mysm.hibernate.core.base.HGenericDataManager
  [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
  [May 13, 2013 10:02:29] [INFO] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: Data Manager was initialized successfully.
  In data manager: 1
  In data manager: 2
  In data manager: 19
  In data manager: 20
  In data manager: 21
  In data manager: 22
  In data manager: 23
  In data manager: 24
  In data manager: 3
  In data manager: 4
  May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDescriptor
  NEWS: Deployment configuration descriptor manager.xml
  May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDescriptor
  NEWS: Deployment descriptor configuration host - manager .xml
  May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
  NEWS: Deployment of the directory docs web application
  May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
  INFO: Deploy the web application ROOT directory
  May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
  INFO: Examples of Directory deployment web application
  10:02:30 org.apache.coyote.http11.Http11Protocol start may 13, 2013
  INFO: From Coyote HTTP/1.1 on http-8080
  May 13, 2013 10:02:30 org.apache.jk.common.ChannelSocket init
  INFO: JK: ajp13 listening on /0.0.0.0:8009
  Org.apache.jk.server.JkMain 10:02:30 starting May 13, 2013
  INFO: Jk running ID = time 0 = 0/14 config = null
  Org.apache.catalina.startup.Catalina 10:02:30 starting May 13, 2013
  INFO: 6176 SP server startup
  
  
  But even once, when we try to stop and start then same problem occurred that we are not able to connect to the database
  
  Thanks in advanace

  We had solved the problem of our self
  to disable the setting of listener_network

  We also increase the connection timeout on the demand side

• ORA-20009: you are not allowed to connect to this database

  Hello
  
  We have the 11.2.0.1.0 Oracle database.
  
  The DB automatically stops as well as the service stops.
  
  Verification of the alert log, here are the errors... These are continually producing the newspaper and new .trc and .trm files are created every minute.
  
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_j000_7424.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  Fri Jul 01 13:14:32 2011
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_ora_8672.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  Fri Jul 01 13:15:19 2011
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_j000_4916.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  Fri Jul 01 13:15:41 2011
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_ora_3952.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  Fri Jul 01 13:16:19 2011
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_j000_832.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  Fri Jul 01 13:17:16 2011
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_ora_3988.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  Fri Jul 01 13:17:19 2011
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_j000_4352.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  Fri Jul 01 13:18:19 2011
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_j000_2892.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  Fri Jul 01 13:19:19 2011
  Errors in the d:\oracle\admin\fw4dev\bdump\diag\rdbms\fw4dev\fw4dev\trace\fw4dev_j000_2416.trc file:
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-20009: you are not allowed to connect to this database
  ORA-06512: at line 4 level
  ......
  ..
  .
  
  Please go back, in case anyone has the solution for the same thing.
  
  Kind regards
  Jinisha

  Hello
  It is a 'feature' really annoying a logon trigger event is 'CONNECTION' not 'LOGON' that is to say there is a space after the opening of SESSION

  Change your query to

  Select * from dba_triggers, where triggering_event like 'LOGON '.

  And you will find it.

  See you soon,.
  Harry

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• not able to connect to the game of google on mobile data store

  I bought gold x 2 lenovo 32 GB vibe.

  in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

  Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

  and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

  Please give the solution.

  
  

• I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download

  original title: installation FIXIT

  I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download?

  Hello

  1. What operating system do you work?
  2. What Fix - it you are trying to install?
  3. What version of internet explore do you use?

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  http://support.Microsoft.com/kb/555375

  You can try the following:

  Remove temporary internet files

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Also try to save the file on your computer, then run it.