Not available in the configuration of the adapter VMNet8 virtual network

Hi all

I have HAD the following config:

Virtual Server 2 on a machine with a physical NIC XP

Two comments machines two Ent W2K3 running.

IP address 192.168.1.1 and 2.1 default gateway of 192.168.1.5

Both machines network cards configured to use VMNET8. VMNET 8 configured through the virtual network with IP 192.168.1.5 Editor

The virtual card configured VMNET8 with 192.168.1.5 address in the host network configuration and the default gateway set as 192.168.0.254, that is the address of the gateway for my network home.

With this config, I have had my two virtual on the same network and "Native" computers to the internet via my home network.

Problem now is that somehow my journey becomes stripped on the host. The NIC VMNET8 achieved somehow a metric is lower than the physical host adapter. No problem when accessing the net from virtual methods, but when you try to access the net from the host machine, it attempts to route the internet traffic on the virtual interface on VMNET8 and of course fails.

In addition, the possibility to connect the virtual machines to VMNET8 is not an option in NIC on each virtual machine settings more. I only have NAT, connected by a bridge and host-only.

I spent some time on the issue without success so I uninstalled VMware and removed two virtual machines. After you have reinstalled, I am always presented with the same two questions.

Does anyone have an suggestions?

Kind regards

Hamish.

Welcome to the forums!

I would say to keep the values by default as long as you have a good reason to change.

Configure:

I guess 192.168.1.0/24 is your address for VMnet8 network!

The adapter VMnet8 host to:

no gateway 192.168.1.1 by default, it is not necessary here.

Comments:

Either DHCP (served by the DHCP of VMware Server) or fixed IP 192.168.1. < starting="" with="" 10=""> , DNS, default gateway: 192.168.1.2
If you use the VMware DHCP server control if 192.168.1.0/24 is configured as network VMnet8 address.

Do not connect to the vNIC to VMnet8, choose 'NAT', which is VMnet8.

If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

AWo

VCP / vEXPERT 2009

Tags: VMware

Similar Questions

  • How to restore the new tab button in the navigation menu when it is not available in the Customize?

    The new tab button disappeared from my navigation menu. None of the changes or upgrades have been made. While all subjects of support suggest going to customize the toolbar, the new tab button is gone either. There in the morning, disappeared in the evening without apparent reason. The + is at the end of the series of tabs, but not in the navigation toolbar and tab add + is NOT anywhere on a page it there is that a single label. I HIDE TAB BAR WITH ONE TAB 1.1 but have had for weeks, and the new tab button was always there. How to restore the button tab on the Navigation bar if it is not available in the choice to customize the toolbar?

    Don't you see the new tab button on the tab bar if you open the window customize?

    If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

    You can check the problems caused by a corrupt localstore.rdf file and try to delete this file.

  • iCloud library is not available if the system library is located on a network file server

    I moved my library on an external hard drive, that drive is directly connected to my router via the USB port.

    I can make pictures to my library of photos and pictures of charge very well. I've set the library to serve the library system:

    But, by selecting the option of using iCloud library gives me this error message "iCloud library is not available if the system library is located on a network file server.":

    I have the ability to connect this external hard drive to an iMac which is used as a server, I just prefer not, but if it's the only option I want.

    So in short, can I use this configuration? If so, why the error message and how to cope.

    Thanks in advance to all.

    That's right - the library needs (for iCLoud, use of the library and for the safe operation) to be on a local wired connection - may not be on a network connection

    LN

  • NLB - the RPC server is not available on the specified computer. To connect to the &#60; Server &#62;

    Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

    Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

    Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
    "The RPC server is not available on the specified computer. "otherNode.com" connection error"

    I disabled the back loop check - it makes no difference.

    Any help please?

    I think I solved the problem...

    As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
    HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

    Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
    Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

    This solved the RPC error in my environment of NLB.

    Hope this helps those who have the same symptoms.

    Samuel.

  • Driver Bluetooth not available on the Dell Support suite

    Hello to everyone in the community,

    I have this Dell Inspiron 15R N5110 for the last year and I am generally satisfied with his performance. I got Windows 7 Ultimate edition provided by my dealer and it worked well all round. I joined Dell Community a few months ago and downloaded and installed DELL QUICKSET from Dell Support site as an update. Before installing Quickset suite Bluetooth to my laptop would work fine, but after installing quick adjustment, it has stopped working. Without doubt, I disturbed the sequence

    Recently, I installed a new copy of Windows 7 and follow the order appropriate for the installation of the driver. I couldn't find a driver Bluetooth of independent outside the BHS + WLAN driver on the dell support Web page. The laptop recognize the Bluetooth and Wireless LAN adapter but cannot start the two. I found the wireless LAN driver, but the driver now Bluetooth is not available on the official Dell support site. I tried online diagnostics and research on the Dell Support programs but could not find.

    Can someone please give me the link on Bluetooth driver in the Dell Support Web site?

    Concerning

    Junaid Shah

    Pakistan

    Hi Junaid Shah,

    Inspiron 15R N5110 goes hand in hand with a combo (Wi - Fi and Bluetooth) card and the drivers are not provided separately. You will need to download the driver of combo on the Dell site.

    The drivers are downloadable at the link below.

    http://Dell.to/QtFK85

  • After Effects are not available in the list of apps

    After Effects is not available in the list of apps on creative cloud that I just downloaded.

    I tried to download it from the site, but would be automatically launche creative cloud that, even once, includes no AfterEffects!

    What should I do?

    This is probably because your computer does not meet the configuration system requirements - for example, is not a 64-bit computer.

    See the following page:

    http://www.Adobe.com/products/AfterEffects/tech-specs.html

  • DPS Web Viewer - we're sorry, this content is not available in the browser.

    We're sorry, this content is not available in the browser.

    Please visit our website or download our app on the App Store.

    This message when trying to view the folio in a Web Viewer. The URL was built, based on the article http://www.adobe.com/devnet/digitalpublishingsuite/articles/embedded-web-viewer.html

    I have configured the folio to be Public and free, inside the folio, Article access of the artcile earch attribute are defined in the aerosol.

    What else am I missing?

    It's working now. There is a time lag between completing producer Folio edition and be available in Web Viewer. Usually a few minutes or more.

    Seems that the ISSE could be that he was 'Private', very easy to miss this when you publish.

    http://ContentViewer.Adobe.com/s/com.ensemble.customstorefront/ddc2a5e52a4840bfbf741edcf30 87c65/May/PDF%20WORD.html

  • Error: OPatch component is not available in the software Center to patch

    Hello

    I've got OEM 10.2.0.5 and try to apply the patch to database. On the step 2 'List of targets' when you press 'Next' get this error message:

    Upgrade OPatch. -OPatch component is not available in the software library to the xxx of the target patch. Please run the OPatch tab jobs update task to get the OPatch version required for this target. See the FAQ #6 production grid Automation with deployment procedures (www.oracle.com/technology/products/oem/pdf/grid-automation-deployment-procedures.pdf) for download OPatch at the library of software in online and offline mode.

    I see the #6 FAQ and downloaded OPatch manually, upload succeeded according to the answer.

    In deployments OEM-> Configuration-> components, I see that the p6880880_10.2.0.3_38 correction, status is "ready". But still get this error.

    What should I check? How do I ensure that 6880880 has been installed or not installed?

    Maybe I should make a configuration of rights for target xxx those who?

    Really need help
    Best regards
    Nikolajus

    Hello Nikolajus,
    assuming that you're using "Oracle Database Patch".
    The first page of this procedure includes a 'Upgrade OPatch' checkbox, this check box selected?
    Concerning
    Rob

  • iCloud backup after iOS 10 - some files were not available during the last backup

    HI - we are a company with about 350 users of iPhone and iPad.  I put this in the iCloud in the community section, but I've seen other users have the same problem in this section, so I thought I would add here.

    In order to stop users add their own e-mail accounts on the iPhone that lock us the device through restrictions - deactivation of the accounts section.  It stops and then access the iTunes settings.  In the test of iOS 10.0.1, we have one of the devices (a 16 GB 5 s, who had been a backup at 7:20 that morning), improved 9.3.2 that went well with no obvious problems, then, after a few days to leave the handset to the function, we have lifted the restriction and the backup on iCloud to find any backup not occurred since the upgrade and a message 'some files were not available during the last. backup"in its place.

    If all our staff upgrade their phones (we gave says not yet) then the backups look like they stop.  It is easy to fix, as a manual backup, will complete the process, but you have to remove the restriction to do this.

    We tested on iPhone 5, 5 s, air iPad iOS 8 to 9.3.5 and all have this problem.

    I have exactly the same problem, 16 GB iPhone 5s as well. I plan on raising at my Genius Bar appointment today.

  • I tried to backup my iPhone several times. I get a message indicating that some files were not available at the time of the backup. How can I solve this problem?

    I attempt to backup my iPhone several times and it does not backup. I received a message stating "several files were not available at the time of the backup. How can I solve this problem?

    Hello Lope8725,

    Looks like you are trying to backup either iCloud or iTunes, but you have found an error on files being unavailable. Can reply you with the exact wording or a screenshot of the message you are getting?

    In the meantime, you can solve the problem with either of those two sections depending on whether or not it's iTunes or iCloud:

    If iCloud backup could not be completed or if you can not restore

    or

    If your iTunes backup could not be completed or you cannot restore from a backup

    See you soon!

  • Why is not available in the US store loose Office mac app?

    Why is not available in the US store loose Office mac app? Are their outstanding issues with the app?

    You must apply to the developer. Apple reserves the right to remove an element if it does not perform to his expectations or a developer may not able to promote and sell a product around the world due to specific restrictions

  • An attempt was made to update me with firefox 15.0b6 two days ago but it's still not available on the page of version beta of firefox. Why?

    Is firefox beta 15.0b6 a true liberation? After 2 days, I still haven't seen on the page of beta version of firefox, so I don't let the update happens.

    It is a real update. I don't know why it is not available on the beta page, but the latest beta is beta 6.

  • When you try to upgrade to photos in app store I get this message "the object you requested is not available in the store US." does anyone else have this problem or can you tell me how to find pictures in the app store

    "When you try to upgrade to photos in app store I get this message"the object you requested is not available in the store US."does anyone else have this problem or can you tell me how to find pictures in the app store" someone else meets this.  Is it me or is it pictures?

    Ever photos first? It should have been included when you first update of Yosemite and now El Capitan. I know that iPhotos updates get a message like that, but I didn't know the Photos app with a message with it.

    Update to iPhoto to Photos for OS X - Apple support

  • Why the new apple is not available to the Canada

    Why the new apple is not available to the Canada?

    Because Apple has not currently media partners to the Canada to provide reports to fill out the app.

    By the end of 2012 mini Mac, OS X El Capitan 10.11.5 beta 2;  Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 Air & iPhone 6 + iOS 9.3.2 beta 3;  Apple Airport Express

  • Favorites menu is not available in the combustion chamber, but it is available in internet explore. Why?

    Favorites menu is not available in the combustion chamber, but it is available in internet explore. Its very useful to save the url.

    Please provide the Favorites menu in the combustion chamber.

    Firefox uses the term bookmark instead of bookmarks/favorites.

    Firefox has also several advanced features see also

    The text above in blue are clickable links, the articles themselves have also other links within them.

Maybe you are looking for

  • How to remove the Chief Executive

    How can I remove the administrator that was made when I used my Macbook pro

  • CB-37FH-SP vs CB-37F-HVD

    That tal: What difference between los Hay blocks conexion CB-37FH-SP (778676 - 01) con respecto al CB-37F-HVD además los voltajes as Marion y el tamano? Ambos Québec pasa Lo're tengo, estoy probando conectandolos a UN modulo salidas NI9476 cable UN m

  • HP Pavilion x 2: help me

    Hel me my system hp pavilion x 2 off code 58944049 help me pleaseThankz

  • Mouse Logitech 'smart move' does not

    Mouse Logitech 'smart move' (where pointer snaps by default) does not work.  It works fine on Firefox. I have RoboForm and on Internet explore when I opened a new site of the filling and opens the window submit on Roboform, but the mouse cursor isn't

  • I can't save anything to C

    Whenever I want to save pictures to my C, it says that I don't have rights to save the file in this position and I have to ask the administrator... But I am the administrator. In addition, whenever I am trying to create a text file using C++ and choo