Not compatible Video Codec found in the preset. Failed to load predefined.

Similar Questions

• QuickTime, export error QuickTime for Windows is unable to export H.264 on computers with more than 16 cores of CPU because of a problem in the Apple H.264 compressor component. Export error Incompatible Video Codec found in the preset

  I get now after a recent update this error pop up.  I already tried to reinstall QuicktimePro and I am still getting this error.  Any thoughts on what may cause this problem and how can I solve it?

  Thank you

  Media Encoder QuickTime H.264 encoding is based on the QuickTime component provided by Apple.  Unfortunately, the version Windows of QuickTime from Apple does not support the 16 + processor cores.  Unless Apple corrects this problem on their own, we cannot do this work on Media Encoder.  Another solution is to use encoding H.264 (.mp4) and it works on any CPU configuration.

• I tried change Classic theme but get error "the visual style clould not be loaded because the file failed to load"

  I have a problem with my windows xp theme. I have catchy to change Classic theme but theirs aren't Exchange and I apply another theme there is error "the visual style clould not be charged because the file failed to load" and I'm windows resulting in normal but agin theme same error. Please tell me the solution.

  Hello

  Please follow the steps below.

  Method 1:

  Run the tool from the link below System File Checker.

  http://support.Microsoft.com/kb/310747

  Method 2:

  Try to create the new user account and check if it works very well.

  http://support.Microsoft.com/kb/811151

  See also the below mentioned link.

  http://support.Microsoft.com/kb/555512/en-us

• my systems page will not open error message "the page failed to load".

  Original title: my systems page does not open after going into the control panel and then system and maintenance

  my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?

  Hi Sarah Brown,.

  (1) remember you to make changes prior to this problem?

  (2) what is the complete error message you receive?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• When I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work.

  I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.

  Discussions were merged.

  Deleted duplicate.

  Original title: failure of the Dll

  The error seems to be a common problem with Dell laptops:

  http://en.community.Dell.com/search/#q=Lanucher%20dll&sort=rating%20desc&defaultAskForumId=0&pi1680537405=1

  It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.

  Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:

  http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers

• I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

  I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

  I tried to take different paths, as via the Control Panel, but it's the same thing.

  Operating system?

  Try the following: -.

  Open search Vista Start Menu Bar and type: RUN

  Click OK

  Type the following lines, and after each one, click OK: -.

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  No guarantee

  TaurArian [MVP] 2005-2010 - Update Services

• When I click to open windows update I see on the screen (the page failed to load)

  When I click to open windows update I see on the screen (the page failed to load)

  I'm trying the two just doesn't work

• Not compatible video formats to sony mp4

  I got the Sony tablet S with the intention to use it as a media controller. I have all my music, photos and videos are stored on a stand-alone DLNA media server. Over the past 3 years I have been using Sony DCS - WX1, DCS - WX5 and DCS-HX9V Cameras for making MP4 videos. Playback of the video well on my Sony XBR - HX909 TV and PlayStation 3. The thing that kills me the most on the Sony S tablet is that it won't play video.

  Why sony s tablet is not compatible with the products own sony video formats? I have hundreds of hours of videos made by the sony cameras and this sony tablet will not play them. WTF.

  To make things worse, I can't even throw the videos on TV. If the Sony Tablet S cannot read the video rendering device should not be able to play. Where is the logic of that?

  Will there be an update to allow the Tablet S MP4 video piece produced by camera Sony products? Or to any the less being able to launch the video to a rendering device that can play video.

  Convert my videos, it's out of the question. There are too many files, and why should I convert then just because of the limitation of the Sony Tablet S. In addition, my iPhone and my wife's iPad can play the video fine using a DLNA client application. I'd be more inclined to try to return this Sony Tablet or put it on ebay and just get an iPad if something can't solve this problem soon.

  Thank you sony

  + 1

  Similar question. I like that I can store my music in one place and play in another place on the Tablet or on another device controlled by the Tablet S. I want to do the same thing with my videos. For example, my Tablet S can see the recordings on my DVR, but it will not play them. What a tease.

• We get an error "windows 7 was not compatible with my computer" during the download of Windows Media Player for Windows 7.

  * Original title: Windows Media Player for Windows 7

  It seems that my computer (windows 7) did not come with Windows Media Player. When I tried to download it, it has stated that windows 7 was not compatible with my computer and gave me a windows xp download. Why is this and how would I be able to get the version for windows 7?

  Hello

  What version of Windows 7 do you have? What is an "N" or "KN" version that doesn't include WMP 12?

  Start - type in the search box-> WinVer find upstairs and double-click it.

  Media Feature Pack for Windows 7 N and Windows 7 KN (KB968211)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=31017ed3-166a-4C75-b90c-a6cef9b414c4&displaylang=en

  ========================================

  If this did not help to tell us which version of Windows you have.

  ========================================

  Check the Task Manager to make sure that WMPlayer.exe is not already running, and if it is complete the process
  on this subject. Click right tab taskbar - TaskManager - process.

  -------------------------------------------------

  Make sure that Windows Media Player is on.

  How to enable or disable the features of Windows 7
  http://www.SevenForums.com/tutorials/5023-Windows-features-turn-off.html

  -------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ---------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My Omni 27-1057c Gets a "ERROR: not detected no boot disk or the drive failed.

  The computer will start up to run for a while appear them error: no boot disk was detected or the drive failed.

  Hello

  Follow the link below:

  http://support.HP.com/us-en/document/c00439024

  run a test of hard drive failure is the problem HARD drive... u can save the data n replace it. If it passes the back up of the data and perform a restore of the OS and reinstall the OS

• Network and sharing - "the page failed to load".

  The network does not funtion on my new laptop computer. When I try to open the network and sharing, it gives me a white page that says "the page Impossible to load. It worked fine when I had last week. If I look at the devices it is said they work normally.

  Colombia-British

  Hello, spearbc

  Please use the Forum for answers!

  Have you installed a software between yesterday and today?

  To clarify, you get this error in the centre network and sharing, correct? (Image)

  You can try to run the System File Checker and let us know the results, analyze the system-protected files and replace the incorrect versions with correct versions of the files Microsoft.

  Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER: sfc/scannow

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a Toshiba with Windows 7, my windows media player need video codec to read the files. What is it and can I download?

  I can't videos to play because of need for codec? I tried to download what I thought I needed, and everything destroyed my computer. Help, please!

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  I suggest you for the link and check if that helps:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Why can I not see videos from YouTube without the circle in the middle of the screen rotation?

  Whenever I try to watch a movie or a video clip, the screen keeps stuck and the circle in the middle of the screen keeps spinning.

  Sorry for this late reply, but your answer to my problem was exactly what I need! I looked at my films and documentaries since you gave me your suggestion and they are just as good, if not better.

  Thank you SOOO much!

  JAS Abyssinia

• Media Player11 will not play video (DVD disc). The sound is fine and a DVD decoder was installed.

  Where to start... After you download the necessary drivers and also I was able to get my sound work. Then, I bought and downloaded the dvd decoder, InterVideo DVD XPack. When I put a DVD in the drive, Media Player appears and I press play and I hear the sound but I do not see any video!

  I tried to download and use other video players, but none have worked so far. Everyone give me reasons why they can not read/play the disc or separate errors. Some have suggested that I change my screen resolution or color quality. I have and nothing makes a difference. Only, I can choose between 800 x 600 or 1024 x 768 (16-bit or 32-bit).

  Product # RUA769UA

  Pavillion dv2000 CTO notebook

  OS: XP Home SP2 64-bit

  Any help would be appreciated!

  The fixed! I downloaded the graphics driver and everything works well so far.