Not connected to the SOA - no user domain server

Similar Questions

• I have Windows Vista, can not connect, is the file 'another user '.

  Hi, I have Windows Vista Ultimate Edition.

  my computer restarted somehow while I was with her and now the only way I can connect is a folder named "other users". It asks me a username and password but I don't know what it will be. How can I solve this problem?

  Hello

  Try the methods here, but not exactly the same question that they should help to correct yours.

  Your files must be accessible by any ADMIN account in C:\Users if necessary to migrate
  to another account.

  -----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry smartphones can not connect to the Blackberry server

  I can't send or receive messages BBM or connect to the internet. Status of the service, I said "m not connected to the Internet Service or Enterprise Server. I am connected to my mobile provider and I seem to be the only one having this problem with my friends.

  I understand the problem. The problem came from a problem/mistake with my mobile operator and change/upgrade plan. If the problem is not related to the BB server.

• Could not connect to the local user accounts

  We have the following configuration:

  1. the virtual machine.

  Windows Server 2008 R2.

  b. active Directory

  2 physical machine.

  Windows Server 2008 R2.

  b. connection to the Server VMware View 5.0.1

  3. the virtual machine.

  Windows Server 2008 R2.

  b. connection to the Server VMware View 5.0.1

  Machine #2, we have connected successfully with VMware View and on machine #3 we have the following error:

  2012-11-13 17:28:10, 164 DEBUG < MessageFrameWorkDispatch > [ws_winauth] any logged-on user as a local user (domain = XREN1)
  2012-11-13 17:28:10, 165 DEBUG < TP-Processor3 > [VDIContext] ADAM connection failed: com.vmware.vdi.common.winauth.WinAuthCodifiedException: failed authentication: could not connect to the local user accounts
  2012-11-13 17:28:10, 166 DEBUG < TP-Processor3 > [VDIContext] failed connection create ADAM: com.vmware.vdi.adamwrapper.exceptions.ADAMConnectionFailedException: failed authentication: could not connect to the local user accounts
  2012-11-13 17:28:10, 167 INFO < TP-Processor3 > [LoginBean] user all failed to authenticate to view administrator
  2012-11-13 17:28:10, 167 DEBUG < TP-Processor3 > [ViewFlexFactory] com.vmware.vdi.admin.ui.LoginBean.login ms 13

  did you install the second server conection as a Local Administrator?

  a second connection to the Member Server in the domain before you install the software?

  be as a member of the domain using an account with local administrator privileges to be sure area.

• Could not connect to the service user profile Service.

  I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

  "Unable to connect to a windows service.
  Windows could not connect to the service user profile Service.
  This problem prevents limited users to logon to the system.
  As an administrator, you can review... »

  Shortly after this message, I get a windows error message saying:

  "Location is not available.
  C:\Windows\system32\config\systemprofile\Desktop is not accessible.
  Access is denied. »

  This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

  While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

  I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

  I'm not sure what that means at all, but I hope that one of you people can help.

  Thank you!

  Hello any Leafs fan,

  Thanks for posting on the Microsoft answers Forum.

  Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

  Usually, when the above error occurs, it is due to a corrupt user profile.
  The best way to fix this is to remove the user profile.

  • Go to the Start button
  • Right click on computer
  • Go to the properties
  • Go to Advanced System Properties on the left pane
  • Select the Advanced tab
  • Go to the user profile Section and click on the settings button
  • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
  • Connection again and you will get a new profile.
  • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

  The only way to identify what caused the error with the user profile is to try to reproduce it.

  If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

  If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

  You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
  To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

  Please post with your results and if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PC with wireless card will not connect to the login of the user (Windows 7 RC)

  My PC uses a Rosewill (RNX-G300EX) wireless card with the software and drivers of Railink.

  With Windows XP (Pro) PC would connect to my home network and the internet on startup without user logon.  It is important to me because the data that I want to use on the network on this PC, and I don't necessarily want to have a user logged on to do.  I also have immediate internet access to connect remotely with TeamViewer, which worked perfectly with Windows XP.

  Since my switch to Windows 7 RC, I don't get the immediate connection through the wireless card.  It does not connect to the local network or the internet until a user logs on.

  Articles I checked:
  Driver - Microsoft actually already provided an updated driver that were obtained through Windows Update.  The driver for the wireless card should not be a problem.
  Power settings - I checked in advance for the power settings in Windows 7 and made sure that the wireless card has been set 'Maximum Performance '.
  Properties of the device - I have checked the device properties for the wireless card and made sure they were NOT defined to allow the OS to turn it off to save energy.

  I missed some type of parameter which is a novelty for Win7?  My computer with a wired network connection works fine with Win7 and is accessible at startup without user logon.

  First of all, thank you for the Mark test.  But the problem was not to have the connection when a browser is opened.  To open a browser, a user needed to be connected... with a logged-in user, the wireless adapter worked fine.

  Now, to answer my own question for someone else who might read this.

  I sent this message to Rosewill.  They advise that Ralink (spelled correctly this time) had not yet developed a good driver for Windows 7.  Windows Update apparently used a Vista driver and Windows 7 is apparently a bit different... or just Ralink is not cut with Vista either.

  So, I tried a Netgear USB wireless adapter.  BINGO!  The computer automatically start this device.  There is now a network connection to start.  TeamViewer now shows the computer as being online without that person may be connected.

  ANSWER: hardware
  RALink is a failure by juggling the time.  If you are looking to buy an adapter wireless network with a Ralink chipset, don't.  The link that Rosewill support sent me for the Ralink drivers was broken.  The Ralink site shows it as having certificate problems and IE8 does not recommend open it.  They are apparently dropping the ball.

  I'll buy a new wireless network adapter.

• Windows could not connect to the user profile Service

  I couldn't use my own laptop for six months. Whenever I try to connect to my profile (profile/ONLY the Administrator profile), it gives me this:

  "Unable to connect to a windows service. Windows could not connect to the service user profile service. This problem prevents standard users to log on to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  The error itself didn't come for two days now, but the problems still present themselves:

  -My personal profile seems gone.

  -Impossible to connect to the internet (my connection is fine, I use another laptop on the network even in the same House now)

  -Return to default settings

  -Slower than usual start.

  I tried the solutions that have been everywhere online and none of them worked for me. Help, please? I'd like to have my laptop back...

  Additional info: Im using a laptop Windows 7 Dell Inspiron (1564) and there is no point of restoration since before the error. I tried the Regedit fix and it didn't work and it doesn't let me delete the profile owner / administrator as to make a new one.

  To correct this corruption of user profiles, consult a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, then post them here [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on this issue.

• Could not connect to the workspace by using my Native user credentials

  Is there a particular reason why I can not connect in the workspace using my native user. I don't see no matter what form of connection when I type directly the application of the workspace.

  ... I'm new to EMP 11.1.2.2

  Thank you

  When you enable SSO you are allowing him to space.

  Pablo

• _Capture image questions HPDM4.5 SP4 (Errorcode-400 could not connect to the shared folder)

  Hi, hope someone can help me.

  I'm under HPDM 4.5 SP4 on a member of the domain Windows 2008R2 SP1 x 64 server.

  I try to use the model "_Capture Image" on a light field customer non-member HP T610 (Agent version: 4.5.3360.18502, version of the device: 6.1.7601.286)

  Configured the master repository, used Filezilla server and did a test on the FTP and the Shared folder.

  FTP path: ftp: / //hpdm ("C:\Inetpub\Ftproot\HPDM")

  Path of the shared folder: ------\hpdm

  Bin play with the settings and read this for a day, but no mather what I try, whenever I use the model I get: ErrorCode:-400 could not connect to the shared folder.

  Edit: when I run the model, I see a folder created in "C:\Inetpub\Ftproot\HPDM\Repository\Images\test1_1", but the HP Imaging tool displays some time: set up the share folder. Finally the error task and the test1_1 folder is deleted.

  Please advice

  Hello to all you readers looking for the answer to this...

  @ jeff_x thank you for your response.

  1. all units has no (I tried 5)

  2. now 4.5.3660.16798 running and it works

  3. all thin clients running DHCP

  4. all thin clients and server hp - manager already running in a serparate network.

  But the solution was simple. Had to delete all software HPDM

  Fact Download Manager-cutting (sp60327.exe) HPDM and HPDM SP4 (sp64049) < at="" max="" 200kb/s=""> >

  Installed from scratch and configured the master repository with:

  Name of the repository: master repository

  Server address:

  FTP (FileZilla Server, created a user 'anonymous' without password, shared the folder c:\inetpub\ftproot\hpdm to this user and pressed the button "set as home dir")

  User name: anonymous

  Password: (blank)

  Path: simply put ' / '.

  Protocol of shared folder settings

  User name: \user (created a local user for this purpose and placed it in the local administrator group: Administrators)

  Password: (what you do to the top when you created this account)

  Path: just put in "hpdm.

  Hit test and see if it worked for you. BTW, the test button is not the Holy Grail.

  There should be a better manual to set this up!

  I hope that with this info to help a person looking at the same issue 400 error!

• can not connect because the logon method, you use is not allowed on this computer.

  I have a new computer that is joined to the domain, but in trying to have a user login, I get the following error:

  can not connect because the logon method, you use is not allowed on this computer.

  The only way for him to connect is to change its parameters from the user to the administrator. I tried power users and other options and did not work.

  is there any solution for this?

  Hi Snidera,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• Dreamweaver (on Windows 7) does not connect to the server, IIS (v7) using "FTP over SSL/TLS...". »

  I am weather evauating to buy Dreamweaver CS6...

  Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption).  I have a NEW Godaddy SSL certificate installed on the IIS server.

  On the connection between States Dreamweaver: "server certificate expired or contains invalid data."

  I tried:

  -ALL Dreamweaver Server configuration options

  -L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)

  -Make sure the certificate "issued to the"domain name is my domain name. "

  I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS.  I can connect both using Microsoft Expression web.

  This has been discussed previously. I recommend reading my old thread for details:

  http://forums.Adobe.com/thread/889530

  But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers.  The servers/ips/domains and the certificate do not match.  So DW and many other tools fail authenticate with Godaddy SSL connections.  Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky.  Once you modify encryption against zero, the connection will be accepted.  Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites.  These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.