Not currently logged in error when editing report

Similar Questions

• Error when running reports

  When I run the 3 reports: Virtual Machine overview capacity general, report on the use of host & host configured capacity report, I get an error. He mistakes against all of the world thanks to the cluster.

  All other reports will work perfectly.

  The problem seems rather limited, but I pulled a discharge of support and went through the newspapers. I see in the ciq.log which corresponds to the time when I run the following report:

  com.vmware.cm.core.manager.impl.DataRetrievalManagerImpl 2012-08-02 12:57:06, 047 + 1000 - time for performance during extraction data = 0.23 seconds

  [pool-1-thread-1] ERROR com.vmware.cm.report.manager.runner.ReportRunner 2012-08-02 12:57:06, 242 + 1000 - run: ReportRunInfo [inventoryObjectReference = IOR - uid = 0 aliveId = 8 = type of group-d0 me = ALL, reportId = 93, reportSettingId = 1, userIdentity = UserIdentity [username = xxx]]
  has an exception when generating reports = java.lang.NullPointerException

  backtrace = java.lang.NullPointerException exception

  Means diddly squat to me and hoping someone here may be able to help?

  I've tried rebooting and using another account but, alas, no cigar. VMware vCenter Operations Manager Enterprise Edition Version 5.0.2 770497 to build running. I was running the previous generation until late last week and was so as well the problem. Unfortunately update does not solve my problem.

  There is a bug that occurs when the reporting period is WEEKLY and you try to run the report at the beginning of the week.

  Similarly, this error can happen when the reporting period is MONTHLY and try to run the report at the beginning of the month.

  I intend to fix in one of the versions vcops.

  For now as a work-around.

  change the calculation of its use to use hourly instead of time which does not trigger this error.

  or try to run the report in mid-week or middle of the month.

  Thank you

• Narrator does not read the text deleted when editing

  Narrator does not read the deleted text when you go to end of the text and start pressing the BACKSPACE or delete key.

  It is a known problem with the narrator and Windows 8.

• Could not load Logmanager 'oracle.core.ojdl.logging.ODLLogManager' error when you start the administration server

  Hello

  I installed weblogic 12.1.2.0.0 with RHEL5.6.  After installation, I tried to set the class path in a file setDomainEnv.sh under base domain directory,

  POST_CLASSPATH="/prosun/jasper/jasperreports-3.6.0.jar:/prosun/jasper/commons-digester-1.7.jar:/prosun/jasper/log4j-1.2.15.jar:/prosun/jasper/org.apache.commons.beanutils_1.6.jar:/prosun/jasper/org.apache.commons.collections_3.1.jar:/prosun/jasper/org.apache.commons.logging_1.0.4.jar:/prosun/jasper/iText-2.1.0.jar:/prosun/jasper/groovy-all-1.5.5.jar"

  While I'm trying to start the server administrator, the server is not started and special suite is reported in nohup.out file.  Please help me solve this problem.

  The library above pots are required for our applications.

  Could not load Logmanager 'oracle.core.ojdl.logging.ODLLogManager '.

  java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager

  java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:366)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:355)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:354)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:423)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:366)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:308)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:355)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
  at java.security.AccessController.doPrivileged (Native Method)

  to java.util.logging.LogManager$ 1.run(LogManager.java:186)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:354)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:423)

  to java.util.logging.LogManager. < clinit > (LogManager.java:176)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:308)

  at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:356)

  at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)

  to java.util.logging.LogManager$ 1.run(LogManager.java:186)

  at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)

  at java.security.AccessController.doPrivileged (Native Method)

  to weblogic.kernel.KernelLogManager.access$ 000 (KernelLogManager.java:17)
  to java.util.logging.LogManager. < clinit > (LogManager.java:176)

  
  to weblogic.kernel.KernelLogManager$ LoggerMaker. < clinit > (KernelLogManager.java:20)

  at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)

  at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)

  at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  to weblogic.kernel.KernelLogManager.access$ 000 (KernelLogManager.java:17)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  to weblogic.kernel.KernelLogManager$ LoggerMaker. < clinit > (KernelLogManager.java:20)
  at java.lang.reflect.Method.invoke(Method.java:601)

  at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
  at weblogic.logging.MessageLogger.log(MessageLogger.java:96)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at weblogic.logging.MessageLogger.log(MessageLogger.java:111)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at weblogic.security.SecurityLogger.logDisallowingCryptoJDefaultJCEVerification(SecurityLogger.java:13444)

  
  at java.lang.reflect.Method.invoke(Method.java:601)

  at weblogic.security.utils.SecurityUtils.turnOffCryptoJDefaultJCEVerification(SecurityUtils.java:81)
  at weblogic.logging.MessageLogger.log(MessageLogger.java:96)

  in weblogic. Server.main (Server.java:70) at weblogic.logging.MessageLogger.log(MessageLogger.java:111)

  at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)

  Could not load Logmanager 'oracle.core.ojdl.logging.ODLLogManager '.

  java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:366)

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:355)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:354)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:423)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:308)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:356)

  to java.util.logging.LogManager$ 1.run(LogManager.java:186)

  at java.security.AccessController.doPrivileged (Native Method)

  to java.util.logging.LogManager. < clinit > (LogManager.java:176)

  at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)

  at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)

  at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)

  to weblogic.kernel.KernelLogManager.access$ 000 (KernelLogManager.java:17)

  to weblogic.kernel.KernelLogManager$ LoggerMaker. < clinit > (KernelLogManager.java:20)

  at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  Kind regards

  Anand Krishnan

  Hello

  I did according to your suggestion and cant able to start the administration server.

  I tried to post the class path by adding '${POST_CLASSPATH} " as follows and the problem was solved.

  Thanks a lot for answering my query.

  POST_CLASSPATH="${POST_CLASSPATH}:/oracle/Middleware_1212/jasper/jasperreports-3.6.0.jar:/oracle/Middleware_1212/jasper/commons-digester-1.7.jar:/oracle/Middleware_1212/jasper/log4j-1.2.15.jar:/oracle/Middleware_1212/jasper/org.apache.commons.beanutils_1.6.jar:/oracle/Middleware_1212/jasper/org.apache.commons.collections_3.1.jar:/oracle/Middleware_1212/jasper/org.apache.commons.logging_1.0.4.jar:/oracle/Middleware_1212/jasper/iText-2.1.0.jar:/oracle/Middleware_1212/jasper/groovy-all-1.5.5.jar:/oracle/Middleware_1212/jasper/poi-3.2-FINAL-20081019.jar".

  Kind regards

  Anand Krishnan

• "Could not open install/log file" error when uninstalling a program game

  Whenever I try to uninstall a program a number of games, I get a box come in saying 'caould open the Setup log file. Ive tried restarting computor.but nothing. Hopeing you can help us. At soon phil.

  Whenever I try to uninstall a program a number of games, I get a box come in saying 'caould open the Setup log file. Ive tried restarting computor.but nothing. Hopeing you can help us. At soon phil.

  Assuming you are using Vista.
  If you Vista, can I assume that you went to application programs and features, try uninstalling the game, but he wouldn't let you?

  If so far my hypothesis is ok, then maybe you want to try one of these 3rd party uninstall programs.

  Here are a few FREE uninstall programs...

  IObit Uninstaller 1.1
  http://download.CNET.com/IObit-uninstaller/3000-2096_4-75161625.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  P.S. I used Revo a couple of times, and it worked.
  I did have the opportunity to use the other 2 listed above.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error when running report in oracle applications

  When running the report in oracle applications, I am getting below error
  
  Arguments
  ------------
  AS_ON_DATE =' 2013/03/21 00:00:00 '
  sdate =' 01/04/2012 00:00:00 '
  EDATE =' 2013/03/31 00:00:00 '
  ------------
  
  Obliging NLS_NUMERIC_CHARACTERS to: '.,' for the treatment of OPE
  
  APPLLCSP Environment Variable to:
  
  NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are:
  American_America.AL32UTF8
  
  '.,'
  
  Enter the password:
  REP-0004: WARNING: could not open the file of user preferences.
  REP-0300: ORACLE error occurred.
  REP-0069: internal error
  REP-57054: work in progress completed: completed with error:
  REP-300: ORACLE error occurred.
  
  I tried to run the same report in Report Builder, it works according to the condition. But it does not work in oracle applications.
  
  Help, please.
  Thanks in advance.

  Hello
  To resolve the warning (REP-0004: WARNING: could not open the file of user preferences), copy the file prefs.ora to your report builder $ORACLE_HOME/tools/admin/directory in the directory $HOME of the Applications.

  Please do the above step after that, if you get an error, please paste the same thing here.

  Select this option if this helps you.

  Kind regards
  Kishore

• Facing the error when creating report in OEM 12 c Cloud Control

  Hi all
  
  I want to create a report in OEM 12 c Cloud control in the editor Information. I have a select element as a "Table of SQL" and select data from ' CG$ metric_values_latest ' view. But when I write an sql statement such as...
  
  Select * from metric_values_latest $ ca
  
  Then on running I get the following error 'element rendering Error. "Exception: ORA-00942: table or view does not exist"
  
  What can be the problem for it. Please suggest...
  
  Thanks in Advacnce!

  You just need to grant the user mgmt_view on these tables/views selection...

• with the master page "insert current page number" error when you export the book

  Using InDesign CS for Windows 5.5

  Recently updated for InDesign CS (very old one from 2003). I save a copy of all my old files version and kept the old installed ID just in case (after reading all the horror stories on here).

  In my old version of ID, I created a book consisting of some 70 documents. Some of these documents are a single page, while others have multiple pages. In the multiple documents page, I used the "insert... current page number" character (or whatever the command was in the old version) on a page master and formatted as follows, for example: Page 1 of 17, Page 2 of 17, Page 3 of 17, etc. When I exported my book in pdf format, it worked fine. (I is not have to / want page numbers consecutive throughout the book, only in individual documents.) By that I mean my whole book is about 280 pages, but not all of these 280 pages are numbered, only groups of pages in multi-page documents. It is not read page 1-280).

  Am my upgrade to 5.5 a few months ago added some documents in the book, and (if I remember correctly) when I saved the book he asked to convert each document version to the new version, I said OK. When I exported the book in pdf format, some documents that are more than 2 pages are now counted wrong; the numbers are now like this: Page 1 of 17, Page 2 of 17, Page 2 of 17 (supposed to be page 3), Page 2 of 17 (supposed to be page 4), etc. Each page, but page 1 is now page 2 of that either.

  If I open the individual document and export it to PDF, the page numbers work very well. It is only when the document is exported with the book the page numbers to spoil. And it's not all documents in my book; This error starts to a particular document and continues from there throughout the rest of the book, affecting any document more than 2 pages. Documents several pages before that point in the book for export with the correct page numbers.

  I create new documents by performing a "save under" with a previously created document and cut and paste as needed, so I won't have to reformat or implement the page numbers on each new document. I use layers or styles (I do not know there is a better way to do what I need, but I didn't have time to learn the basics, just enough to be functional.)

  My attempts to resolve this problem so far (using version 5.5), tests with the first document where the error: (1) I have removed the document from the book, removed the page number character current insert, back to the current page number character insert, saved, the individual document exported in pdf format and it worked fine. Put it in the book, save, export, and it is bad. (2) I picked up the book document, export the document to .idml, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (3) I started to the top of my old version of ID, open from the previous version of this document, exported .inx, closed, open the .inx in ID 5.5, registered as a new .indd new name, exported to PDF and it worked fine. Put it in the book, save, export, and it is bad. (4) I moved the document to the top in the order book, put it on a document which correctly numbered pages, saved, exported to PDF and this document was still evil, but one who has been numbered correctly all along is still correct. (5) I compared the settings for this document to others that the number properly and found no difference.

  It's as if the page numbers get hooked on "2" when I export the book, but only in the last two-thirds of the book. Sorry this is so long, but I hope that this description of my problem is understandable. Any advice, other than to go back to my old version documents and start over?

  Thank you for your time and all the information great this forum provides.

  Alice

  Normally, I would say that this kind of problem is symptomatic of the incorrect numbering options in the book panel or an individual document or a bad update of the numbering, and those things are still definitely worth looking at.

  That said, I invite you to go to the original files, export each one to .inx and open those in CS5.5 and save as a new file .indd CS5.5 whose new name, then add them to a whole new book CS5.5. Books are pretty flakey without mixture in the conversion of files, and there are enough bad behvior file conversion directly inherited the .inx route is insurance a little success.

• unknown error when editing of PDF in illustrator

  I use Illustrator as the editing of documents Acrobat program. It works fine but just lately when I try to edit a document it wont save and so I can't change anything! Can someone help me, I thought that he perhaps preferences but do not know where to delete them etc.

  What error do you get?

  Try a backup too, rather than save.

  You can delete your preferences on mac to:

  HD\Users\ (username) \Library\Preferences\Adobe Illustrator CS4 Settings\ (file location) \Adobe Illustrator Prefs

  Or you can reset your prefs when you restart this way---> Cmd-Opt-Ctrl-Shift HAVE on Mac or Ctrl-Alt-shift on a PC to restore the default values.

• Get strange errors when running reports

  Hello guys
  
  I have a report with 10 columns and I know that this report contains a large valumns of data. So I created the dashboard of the guests on 4 columns, each are certain default...
  
  When you run the report with all of these 4 default values for guests, I get results. When I deselect the value of a command prompt, I always get the result with longer response times, which is understandable... So when I turn off the option a more prompt value and run the report, in other words, when I unfilter 3 prompts and run the report, I get the following error:
  
  [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 46073] Operation 'write()' the file ' / oracle/OBIEEHome/OracleBIData/tmp/nQS_1040510_4_51140737.TMP' failed with the error: (2) no such file or directory. (HY000)
  
  So when I have unfliter all the guests, I get the same error too after a long period of running...
  
  Has anyone here ever encounter this error? My assumption is that maybe the volumn of data is too large for the report to revisit the dashboard?
  
  Any ideas will be greatly appreciated
  
  Thank you

  nQSError: operation 46073 'write()' the file ' / oracle/OBIEEHome/OracleBIData/tmp/nQS_1040510_4_51140737.TMP' failed with the error: (2) no such file or directory. (HY000)

  Basically, it means that the operation of writing to the cache file fails.
  First of all, check if the section [Hide] in your NQSConfig.ini is configured properly (path, size, etc.).
  Then check the weather, the user account running the BI Server service has the right to write in this folder structure.

  If you have doubts as to the amount of data download shot actual queries against the database from the source of logs to see what the resulting dataset looks like.

  Also, try to run a test of caching disabled.

  See you soon,.
  C.

• display the error when editing on front panel

  Hello

   

  When I add another tab (notching amplifier) in the front panel, the program displays connection error. What should I do to get rid of these errors? I am attaching the file along the slot vi.

  Kind regards.

  This happens because the data type of the tab control changes (you add another page). A tab control is essentially an enum and enum values are part of the data type. A reference to the tab control control is to be packaged and passed in several subVIs. Cluster of frontage on these subVIs control has the element 'Hand Control' value "Include the Data Type". Thus, what they expect to see (for example, a tab with 3 pages) is not what they get. That is why the thread cut. You must either:

  • Uncheck "Include the Type of data" for the item "control of the hand. I don't know what other impact this will have, as I look at all the code.
  • Update all the controls on the front panel with a new reference to the command.

  Aside: who wrote this program needs a lesson on the typedefs.

• "Application not to sell" buy error when virtual goods buying

  My request was released on BlackBerry World right now. When I use my sandbox account to purchase an item from downloaded app BlackBerry World, everything works fine. Similarly, when I use the Test of PaymentManager mode when debugging a version installed locally to the application, everything works also. However, the non-sandbox in-app-purchase a version of BlackBerry World app does not work. I get a "Purchase error" dialog box with the text: "Application not for sale." My page of virtual goods of the application on the supplier portal lists as being Up For Sale, as it has been for the last 3 days.  All references and IDs are certainly right. I'm confused because I got in before work for other applications app purchases, and sandbox sand/test modes work.

  Has anyone encountered this error? It's maybe a configuration problem?

  Your new property should be approved now. Could you test these out and let me know how they work?

  To test you can download a new version of the app in the project, install via the sandbox, then remove your email list of bac BBID to sand and try to make a purchase.

• Not enough Drive Space Error when only to replace the existing files in the copy

  Hi, I have same directories. It is on the D drive and the other is on the E drive. Both drives are 2 TB in size and rich. All files are 262 MB in size. I need to copy all the files from drive E on the D drive, since all files on drive E have video data and files on the D drive are not, although they are the same size files. When I try to copy and replace the files in drive E D, I get an error message indicating that I don't have enough disk space. It is sufficient as I am only to replace the files. No new additional file is copied. What can I do?

  If the files on the 'E' have video and those of 'd' only that they may not have the same size.

  Second, you must be almost 2 x the space to copy files as they are the copy in a folder "tmp".

  If the files are the same on D and E, why don't delete you those without video and move those with?

• cannot read the property of 'msie' of undefined error when editing or previewing in MUSE 2015 was last updated

  Hello

  I've recently updated to the last MUSE CC 2015.2 and when I publish or preview of the Web site, I get this error.

  JavaScript exception: error calling the selection function

  typeError: cannot read property of 'msie' undefined.

  Things, I tried without success:

  1 tried to view in different browsers (IE, Firefox, Chrome), same message.

  2 tried to visualize each exported html file displays the same message.

  3. all files to the server via FTP. same error message.

  4 re-released all the files to the server using the Adobe MUSE FTP program. same error message.

  I am looking for any help I can at the moment.

  I mean the site worked a lot and then update then not work at all.

  Thank you

  John B.

  Thanks to all that replied and I tried to help him, but after much trial and error with the widgets that I used, I found the culprit.

  musegrid - circles backwards,

  When I inserted a new widget he came with just on error the screen design of Muse.

  In my view, that he also had something to do with the museutils.js file. Error screens showed no mention of the widget.

  But this error on every page, and as it was on a master. I knew this had to be the problem.

  Makes feel you good inside where you can find these things! Phew

  If I have more problems I'll you guys know.

  Thank you!

  John B.

• Error when running report bqy

  Hello

  When we run customer BQY Web Interactive report. We get the following error.

  Server error [2009]: Exception in validateDBUser: Com.brio.one.services.das.proxy.DasCommException.

  Please help me.

  Hello

  Yes, we need 32-bit Oracle client to connect to the Oracle 32/64-bit client. Because the IR is designed to work with the binary 32 bits ONLY. Also make sure all the environment variables, have 32-bit binary input prior to the 64-bit

  HTH

  Kind regards

  Zohra.

  (Mark this useful. If it really helped you)