Not easier to scan to PDF with the drive?

Similar Questions

• Help me buy a new all-in-one which will scan to pdf with preview multipage

  I need a new all-in-one, like the OfficeJet HP 6700 Premium e-all-in-one printer, which I watched in a store.  The box was not clear about the capabilities.

  What I do with old HP all-in-one on an old XP, (11-12 years) old machine is scanning documents to preview multipage PDF, so I can adjust the margins and other things, and if I did not have many PDF files for a multi-page document.  I do this a LOT, I need, it is not a such PITB.    I have not found a way to do this with the printers I have, my new computer so I have to go do it on a slow XP machine in another room.  I can only print at the old printer to my new computer.

  I'm used to using the HP, but those I have is old, my old XP machine (6 years) so it is more reliable and my new computer Windows 7 Professional 64 - bit, and Windows 7 drivers for my old all-in-one are not full function, if they still exist, plus we have several computers and tablets on our network now.   None of the older all-in-one I will do what I need for my new computer, if they'll even install (you look, Dell).

  What I need to know, it's done with Windows 7 on HP OfficeJet 6700 Premium e-all-in-one printer?  (Scan multipage PDF with the HP software preview.) The info on the box was not clear.  If not, is there a model preferably wireless all-in-one that will work for me?  I can plug it into a USB port on my new computer, there are several USB 2.0 and 3.0 ports.  I would like to be able to print wireless from other devices, but this isn't a deal breaker.  I don't want to have to download a few fragmentary shareware or buy a high price to accomplish what I was able to do with the software before HP, on old all-in-one.

  That's what I needed.  Why hell isn't in the ^ & *) & ^ % manual?

  http://support.HP.com/us-en/document/c03584750

• How to scan color PDF with Photosmart 6520

  How to scan color PDF with the Photosmart 6520? They only appear on my Mac in black and white and I don't see any option to specify the color on the device.

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  Kind regards
  Shlomi

• There is a problem with the driver for a wireless adapter that if it is not compatible or not supported

  My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!

  If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.

  This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.

  See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

  At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.

• HP7520: How to scan 2 pages with the automatic document feeder and save to a file?

  How can I scan 2 pages with the automatic document feeder and save to a file?  (Right now, it happens that 2 separate files)

  I have a HP7520, & again, I wish scan 2 pages into a single jpeg file.

  Thank you

  Well, in general JPEG format does not support several concept as a document page. Thus, each image in the JPEG file is saved in a single file. If you are considering of reduction of 2 images in 1 paper size (example: A4), you may need some image editor to do

  If you are looking for a mulit-page image format, TIFF can be a format suitable to use.

  https://en.Wikipedia.org/wiki/TIFF

• printer scan works only with the new windows 7

  upgrade windows xp to windows 7 with the new HP Omni 220PC. Have a printer HP C309g-m. To scan from the printer to the computer xp, I had to use the HP Solution Center. The printer works very well with the new windows 7 program and new computer. I install wireless. No problems with it. Today when I went to scan a document with the HP Solution Center (I thought I had to use as before), this message came.

  "HP Solution Center cannot work because your device installation is not complete. Please connect the usb cable, or rerun the installation for a network installation cd. If it does not complete the installation, or you do not have the cd, access the HP help files by clicking on the start menu. "Everything I did. My installation CD said I had a version of the latest update on the installation CD, it was of no use. I went to the HP site and find a download for the drivers updated etc. I downloaded and installed. (although I don't know whether or not it was a duplicate of the drivers of devices on windows 7 for this.) I checked Add/Remove programs to make sure that the printer and the hp solultion Center have been added to the programs. they are listed. I can always scan with

  the hp Solution Center. Should I not this program to scan with this new pc? How can I scan from my printer now? I even tried to click scan on the printer, then scan to computer. the message I got was 'Try from scan of compurer. Refer to the documentation for more details ".  To be sure, I'm all mixed up now. All I want is for my scan printer to work with my new pc.  Everything works well except that scan thing, may help me understand what to do?:  Thank you

  all fixed. has crossed my computer to start then click HP click HP and open list. Went to my printer-clicked on my printer and clicked on the icon list to see if it worked correctly. This is a problem with the drivers and a box popped up with directions on where and how to download and install the devices for windows 7.
  Done this and tested it and everything works fine now. (Ihad already tried the HP site for support and downloaded and installed the fix suggested for the problem, but it did not work). in any case, its fixed and I hope that if someone has a problem, this information will help you.

• the pdf file is error once I modified my file pdf with the document cloud... (iPad)

  The pdf file is error once I modified my file pdf with the document cloud...

  The pdf file is sync with my account, I'm not able to open the latest version of the pdf file now.

  Any idea to restore to the last edit version?

  Hello

  Would like to inform that after that change the document on the ipad, if we go back to the homepage of the implementation of the changes would save it automatically. There is no possible way to restore the changes.

  Therefore, in this case you will need to recreate the document.

  Kind regards

  Christian

• Used to scan on Mac with the installation of ad hoc

  I created my C7250 in an ad hoc network on my MacBook Pro with the latest Mac OS X.  Printing seems to work very well, but HP ScanPro does not recognize the scanner when I try to scan.  He used to work properly when the C7250 was connected directly to the Apple Airport router using an Ethernet cable.  The router is no longer available, so I have to use the ad hoc network.    How the scan to work with the ad hoc network?

  Thank you-

  Mark

  Run the Setup Wizard from the Hewlett-Packard folder in Applications.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• I'm trying to set up a wireless network and it is said that something does not work with the driver.

  Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.

  Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.
  Thank you
  original title: I hope someone can help technophobe

  It is said that there is something not working only not with the driver

  You probably need to install some network drivers for your wireless card.

  Download drivers

  Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Establishment of a network domestic:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  For more information network:

  Start here to set up a home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

  What do I need to connect to Internet:

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

  Adding a wireless computer

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.

  1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.

  2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  Manually add a wireless computer

  1. sign the computer.

  2 open the connect to a network by clicking the network icon in the notification area.

  3. choose the network wireless from the list that appears and then click on connect.

  4. type the network security key or password if you are prompted to do so, and then click OK.

  -You will see a confirmation message when you are connected to the network.

  5. to confirm that you have added to the computer, follow these steps:

  -Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

• my hp phtotsmart d110 series is no longer able to scan to PDF from the front panel.

  my hp phtotsmart d110 series is no longer able to scan to PDF from the front panel. How can I solve this problem?

  Hi Jaci17,

  1. open the Solution Center, and then select settings

  2. select scan settings

  3. delete the shortcuts on the right side

  4. click on the device to update, and then close the scan window

  5. open again the scan window

  6. add shortcuts on the left side to the right side

  7. click on the device to update

  8. try scan from the front panel of the printer

  

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

  Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

  Contacted Adobe Support and they recommended to configure the new Adobe ID?

• where can I find a PDF with the Dutch version of the manual for lightroom 6

  where can I find a PDF with the Dutch version of the manual for lightroom 6

  I don't think it's available yet.  The English help page has a link to it:

  https://helpx.Adobe.com/Lightroom/topics.html

  

  But the equivalent page for the Netherlands only of links to earlier versions:

  Help bij Lightroom | Help bij Lightroom

  

  Ditto for, EN, ARE.  Maybe someone more informed knows if they are available somewhere else on the Adobe site.