Not leave it down load come may?

Similar Questions

• Why am I not able to down load garmin express? on my computer windows 7

  Whenever I have try and down load anything for my express Garmin for my map updates that I always get
  an error message.

  Before Firefox 30, most of the plugins can be activated by sites automatically. 30 Firefox that changed so that sites now need your permission. Some plugins do not work well in this configuration. You can try this:

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find Garmin and change to ' activate ' "always enable".

  You may need to launch a new window, or quit and restart Firefox upwards, before it takes effect.

  Any improvement?

• I am not able to down load from sites I trust and have used for years

  I either get a compatibility message, Windows has detected an error with this file or it will download and will not open or stall during the opening of thought, I had a virus on my desktop, so I called HP and he took to factory settings and which did not help, then I noticed that I have the same problem on my laptop. I have Comcast cable and they offer fre Mcafee, it won't let me not even download.  Any help will be greatly appreciated Ali626I

  Hello

  You have tried on another account and it still wouldn't download?

  Since you recover the system Please redo the steps ALL in my posts from the 1st as we
  need you to be at this point and recovery has changed a lot of it... Sorry, it must be done. Please
  do not skip steps.

  I suspect that the malware could still be present somehow.
  Rob - bicycle - Mark Twain said it is good.

• After downloading, I got an error message stating that the software was fraudulent. I downloaded from the Adobe site. I'm not able to down load again. I start the trial today.

  I need to download the software for my trial. Please notify

  Try to check and direct download:

  http://prodesigntools.com/Adobe-Captivate-8-direct-download-links.html

• do not take virus down loads

  0 x 80070645

  Hi matilida,

  · When you receive this error message?

  · It is during the installation of windows updates?

  · Do you remember recent changes made to your computer before the show?

  · You have security software installed on your computer?

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ProBook 430 1: cannot update win8.0 to 8.1. Update bios to ver01.31 may not even go to the store to down load

  Hello

  I have this notebook since 2013 he was running windows 8.0 I try to update to woindows 8.1 without success. And I saw someone on the forum said if back BIOS do return to the old version 01.05. I tried it did not help. Then I try to update the bios to new worm 01.31 again.

  Now the computer take ages to initialize. «A disk shows committed a script error "and can't even go to the store and down load it say" your PC is not connect to internet...» "but my internet access and all the program works just slow down.

  What can I do now? Going back to the old version of the Bios? How? or you have any suggestions of upgrading to windows 8.1 or 10?

  Any help would be appreciated.

  Stanley

  Hello

  There seems to be some sort of software within the current Windows 8 this problem is why I suggested at the start you first perform a recovery back to a clean install without problem and then try to upgrade to Windows 8.1

  However, if you do not want to perform a recovery, try other things first. However, if this does not help, please perform a recovery and then go through the standard 8.0 - > 8.1 upgrade process.

  1 Please, check the clock and date of your Windows

  2. Please check the BIOS clock/date and correct them if necessary

  3. ensure the Windows user account control is enabled/Active

  3.1 reboot the computer

  4. make sure that you have applied all updates of standard Windows (Control Panel > Windows Update)

  4.1 reboot

  5. make sure you don't have any installed security software that may interfere with the particular process of network, firewall, etc.

  6 Please, run Troubleshooter Windows Update to find and erase errors > > http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-8 |   http://go.Microsoft.com/?linkid=9830262

  6.1. restart the computer

  7, ensure that all drivers are updated - you can run the HP support assistant before that > > http://support.hp.com/us-en/document/c03467905

  7.1. restart the computer

  8 enforce Windows Store reset to clear the cache of WS and settings > > http://www.askvg.com/did-you-know-wsreset-command-to-clear-windows-store-cache-in-windows-8-and-later/

  9 restart the computer once more after the above suggestion

  Try to upgrade once more to 8.1 following the standard procedure:

  > > http://support.hp.com/us-en/document/c03847367

  > > http://www.gizmag.com/upgrade-windows-8--to-windows-81/29394/

  To answer one of your questions - it has no official option to upgrade to earn 8 to 8.1 without going through the Store for Windows 8 and Windows 8.0 Pro. Such an option is available for the Enterprise of Windows edition and it is not available publicly. When you use Windows 8.0 (standard home or Pro version) you can use store - that's how Microsoft decides it is.

  =========================

  If you try everything mentioned above and it still doesn't, please consider if you factory default recovery and then I think it should work according to the standard procedure (immediately after recovery and Windows updates) > > http://support.hp.com/us-en/document/c03847367

  =========================

  Please, I would like to know how this happens.

• DOWN LOAD A CD FROM A CLASS I TAKE IS ME NOT LEAVE

  WHEN I PUT THE CD INSIDE SAYS NOT FOUND LIBRAY SPOKE WITH CD MANUFACTURERS DON'T KNOW WHY DOWN LOAD I AM NOT HAVING WAA FLASH PLAYER 10 COMPUTER IS STILL UNDER WARRANTY, I HAD A LOT OF PROBLEMS WITH THIS LAPTOP.  CAN YOU HELP ME

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in the Forum Vista Hardware at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• My order is not registered, and I can not down load the file as my Mac had a problem so I had to rub off all. [deleted]

  1-why my order is not yet registered?

  2. I can't down load the program I bought

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• every time I try to load it from the DVD the error appears as: "the application could not be started because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Original title: SPWIZENG.dll

  Hi, I got a cd of Windows 7 from my friend who is a software engineer so he gets all the programs (operating systems). It burned in a DVD instead of CD. So, every time I try to load from the DVD the error appears as:

  «The application failed to start because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Then when I click ok, it says:

  The file 'Autorun.dll' could not be loaded or is corrupt. Setup cannot continue.

  Help, please. I'm not good with computers and I honestly don't know what to do.

  Thanks in advance,

  :)

  Hello

  Are you able to play or open other CD or DVD?

  Step 1: These error messages may be due to corrupted media. Try to use the same media on another computer and check if you are able to use it.

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-upgrade-windows-7-error-code-0x7e/b1bfbe8f-7980-4847-a186-2206e87c6bc4

• My windows live Movie Maker has an ER code 0 x 80004005, cannot display viedo of camer after down load, that its there just will not be open for the show.

  After down loading the camera viedo, it will not be open for show, but it's there, ER (0x80004005) it says Director windows live how I do to reboot?

  Have a look at the last 3 letters of the video you've imported to Windows Live Movie maker (WLMM).
  That the last 3 letters represent the format of the video file. If the format is NOT supported by WLMM, he won't play it.

  Here are the formats supported by WLMM:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If your video file format is not on the list above, google for a FREE video converter and it allows to convert your video file.
  The best format to convert is WMV. The most reliable and foo-proof format.

  PS, It might be better if you posted in the section photos and videos:
  http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I down loaded WIN 8 RT and I am not convinced how re-install my Windows 7?

  I downloaded Win8RT and I want to know if there is a way to remove this O.S. and get my windows 7 as the OS no knows how I have does not perform a backup to disk when I got my PC.

  As to my question on "HOW DELETE/ASK (RT 8 back to WINDOWS 7). The forum has been VERY useful for my query pertaing to this question! (TKS guys!) I did different things but as M.S. gave me the instructions/tools to do so. RT is an x 86 platform base and is running a 4.0 framework, I found that the ISO of WIN 7 x 86 down load was necessary and I also had to come in and change the setting for a 3.0 platform. It worked well for me because I haven't run on recommendations 7 disc set parameters. I found (after some searching) don't choose the 'install updates recommended' as I did after install and also ran "CUSTOM" Setup and went from there. The 8RT was 'OK', but after a time, I found it is not a stable OS because I wanted to learn "how" do and apply applications for the WINDOWS 8 Pro platform because I'm sure, is a more stable OS then the RT. I hope that this 'Info' is perhaps useful to those who are trying to re - install the WINDOWS 7 O.S. of the 8RT.  A lot of trials and mistakes were made, and I found it works well for me because I've tried the suggested install from the OLD Win but I found that there are some Win.old 2 and 3 on my Toshiba Lap Top.

  Step 1: Burn 7 win x 86 on DVD disc on a low setting. (select homepage, Premium or ultimate edition)

  Step 2: Turn off windows Desk Top apps, incert 7 disc and then click 'Auto Run' when the drop down menu appears at the top right.

  Step 3: Follow the instructions in 'Inslall Set Up' as shown.

• Epson stylus nx415 pilot not down loaded

  I down loaded a driver for my epson stylus NX415 to internet on the epson site, and I have windows 8. It says its compatible but it keeps giving me an error that it is not compatible! Does anyone have a suggestion?

  Hello

  You can download the drivers designed for Windows 7 and install it on the use of the compatibility mode of Windows 8. Follow the steps.

  Method 1:

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click on run for earlier versions of Windows programs

  (e) click Next, select do not appear. Click next

  (f) click Browse and select the installation program that you downloaded via the link above.

  (g) click Next, click the troubleshooting program

  (h) check the program worked in earlier versions of Windows, but that will not install or run box now

  (i) click Next, select the latest OS known functional for this driver (probably Windows 7)

  (j) click Next.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Method 2: Epson Stylus NX415 all-in-One Printer

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128287&BV_UseBVCookie=Yes&infoType=downloads&platform=OSF_W_8-32

  Follow the method below on how to install a printer.

  Method 3:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Be sure to update all the drivers to the latest drivers of Windows 8 and also run Windows updates regularly.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Could not start or to down load

  can not down load

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• says I have emails, but not down load them - used to work properly

  says I have emails, but not down load them - used to work properly.

  For an example says that there download 1 / 6 after awhile, he says no new messages. I can check my email from another source and see that I have 6 messages and am able to read them. I ran scan programs and malware and clear up all the problems, they found that Thunderbird is not download again. I'm on the latest version 31.6.0

  This is probably one of these programs of malware or anti virus which is at the origin of the problem. Disable the e-mail in your anti virus and restart your computer. Best? What anti virus is it anyway?

• down loaded more recent firefox and now it does not connect to the web.

  Just did the new down load and restarting the Fire Fox cannot connect to the web.
  No problem before this new version.
  IE works fine. Chrome works very well.
  Only fire fox does not.

  You get this error message.

  See also article Firefox cannot load websites, but can other browsers .