not triggered alarm not: insufficient vSphere HA failover resources

Similar Questions

• This VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure

  ESXI 4.0 3 running virtual machines.

  600 GB HDD / 8 Gigas of RAM / Xenon QuadCore.

  ESXI 5.5 (I had two).

  Using Raid 01 (1 TB)

  RAM of 64 Gbite

  Hearts CoreI5 Xenon proceso.

  VCenter server deployment with Vmware Storage appliance.

  Problem:

  I've had enough material resources, in fact, I had twice the disk space and memory to four times more in the reception of news

  When migrating virtual machines in ESXI 4 server and get Vcentener turn it on the message "this VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure.  "

  I do not understand because the servers have resources, I can't find what is wrong.

  Should I use another method of migration?

  Once that you have migrated, can solve this problem without re-migration of computers?

  I found this post, but it's no imformation. This VM could not become vSphere protected HA and HA cannot attempt to restart after failure of.

  Thank you

  See:

  Re: This VM could not become vSphere protected HA and HA cannot attempt to restart after a power failure.

• shared folder t could not access gives error that you have not permission to use network resources

  folder t couldn't access gives error that you have not permission to use network resources while I connect with administrator

  Hello

  1. were you able to access the folder shared earlier?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message?
  4. how the computers are connected?

  Please answer these questions and provide us with more information. This could help us help you better. However, you can view the Sub articles that may be useful.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".
  http://support.Microsoft.com/kb/913628

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP
  http://support.Microsoft.com/kb/318030

• 4 usb ports - this device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)

  m facing a problem with hub 4 ports usb of my... When I connect usb hub my with my usb keyboard and mouse, and then the lights of the suite to get devices but they doesnot work... and the error message shows... I checked in Device Manager and I got the message details which are given below.

  Device status:

  This device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)

  driver version:

  6.1.7601.17514

  Please help me... Thank you.

  Hello

  In the Device Manager - right click on the device and Uninstall - when complete reboot.

  Check in the Device Manager to see if the device re-installed. If it isn't action - Scan for
  hardware changes.

  Also check the BIOS - Setup/settings - often F2 for system start - make sure that the USB port
  is activated. Check with Support from the manufacturer of the system/motherboard, their documentation online.
  and ask in their forums.

  How to fix error Code 29
  http://pcsupport.about.com/od/errorc/a/code-29-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• script to collect 'Triggered alarms' 4 VC in a single report

  Hi team,

  I'm looking for a script to collect 'Triggered alarms' 4 VC in a single report. We use ESXi 4.1 worm in the VC.

  Is it possible to collect all 4 VC triggered alarms in a report by acronym and automatically by email with an Excel report.

  Thank you

  Kind regards

  Roze

  Finally the script helped for my need below.

  Hi looking for script to collect multiple vCenters triggered alarms below:

  How to run these scripts: \Get-TriggeredAlarms - vc001, vc002 vc03 vCenters

  Location of the output file: c:\temp\alarms.csv

  Script:

  ______________________________________________________________________________

  (param

  [String []] $vCenters

  )

  Function Get-TriggeredAlarms {}

  (param

  $vCenter = $(throw "doit être spécifié un vCenter."),

  [System.Management.Automation.PSCredential] $credential

  )

  If {($credential)

  $vc = to connect-VIServer $vCenter - Credential $credential

  }

  else {}

  $vc = to connect-VIServer $vCenter

  }

  If (! $vc) {}

  Write-Host "Failure connecting to vCenter $vCenter."

  output

  }

  $rootFolder = get-file-server $vc "data centers".

  {foreach ($ta in $rootFolder.ExtensionData.TriggeredAlarmState)}

  $alarm = "" | Select-Object VC, EntityType, alarm, entity, status, time, recognized, AckBy, AckTime

  $alarm. VC = $vCenter

  $alarm. Alarm = (Get-View-Server $vc $ta.) Alarm). Info.Name

  $entity = get-view-server $vc $ta. Entity

  $alarm. Entity = (Get-View-Server $vc $ta.) Entity). Name

  $alarm. EntityType = (Get-View-Server $vc $ta.) Entity). GetType(). Name

  $alarm. Status = $ta. OverallStatus

  $alarm. Time = $ta. Time

  $alarm. Recognized = $ta. Recognized

  $alarm. AckBy = $ta. AcknowledgedByUser

  $alarm. AckTime = $ta. AcknowledgedTime

  $alarm

  }

  Disconnect-VIServer $vCenter - confirm: $false

  }

  Write-Host ('Get messages from {0}. vCenters' f - $vCenters.Length)

  $alarms = @)

  {foreach ($vCenter to $vCenters)

  Write-Host "Getting alarms from $vCenter."

  $alarms += get-TriggeredAlarms $vCenter

  }

  $alarms | Export-csv c:\temp\alarms.csv

  __________________________________________________________________

• Triggered alarms of several VC export.

  Hi team,

  I'm looking for a script to collect 'Triggered alarms' 4 VC in a single report. We use ESXi 4.1 worm in the VC.

  Is it possible to collect all 4 VC triggered alarms in a report by acronym and automatically by email with an Excel report.

  Thank you

  Kind regards

  Roze

  Finally the script helped for my need below.

  Try script to collect alarms triggered multiple vCenters below:

  How to run these scripts: \Get-TriggeredAlarms - vc001, vc002 vc03 vCenters

  Location of the output file: c:\temp\alarms.csv

  Script:

  ______________________________________________________________________________

  (param

  [String []] $vCenters

  )

  Function Get-TriggeredAlarms {}

  (param

  $vCenter = $(throw "doit être spécifié un vCenter."),

  [System.Management.Automation.PSCredential] $credential

  )

  If {($credential)

  $vc = to connect-VIServer $vCenter - Credential $credential

  }

  else {}

  $vc = to connect-VIServer $vCenter

  }

  If (! $vc) {}

  Write-Host "Failure connecting to vCenter $vCenter."

  output

  }

  $rootFolder = get-file-server $vc "data centers".

  {foreach ($ta in $rootFolder.ExtensionData.TriggeredAlarmState)}

  $alarm = "" | Select-Object VC, EntityType, alarm, entity, status, time, recognized, AckBy, AckTime

  $alarm. VC = $vCenter

  $alarm. Alarm = (Get-View-Server $vc $ta.) Alarm). Info.Name

  $entity = get-view-server $vc $ta. Entity

  $alarm. Entity = (Get-View-Server $vc $ta.) Entity). Name

  $alarm. EntityType = (Get-View-Server $vc $ta.) Entity). GetType(). Name

  $alarm. Status = $ta. OverallStatus

  $alarm. Time = $ta. Time

  $alarm. Recognized = $ta. Recognized

  $alarm. AckBy = $ta. AcknowledgedByUser

  $alarm. AckTime = $ta. AcknowledgedTime

  $alarm

  }

  Disconnect-VIServer $vCenter - confirm: $false

  }

  Write-Host ('Get messages from {0}. vCenters' f - $vCenters.Length)

  $alarms = @)

  {foreach ($vCenter to $vCenters)

  Write-Host "Getting alarms from $vCenter."

  $alarms += get-TriggeredAlarms $vCenter

  }

  $alarms | Export-csv c:\temp\alarms.

• root.sh failed with the CRS-2800: could not start the 'ora.ctssd' resource as it is

  Cannot start the "ora.ctssd" resource as it is already in the INTERMEDIATE State.
  
  I tried to install two-node RAC on linux REDHAT, I met because of errors:
  
  Beginning of the resource 'ora.crsd' failed
  CRS-2800: could not start the 'ora.ctssd' resource as it is already in the State INTERMEDIARY on the server
  CRS-4000: Start command has failed, or completed with errors.
  Exclusive mode Clusterware ready beginning of Clusterware Services failed to 6475 /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line.
  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  
  How to solve this problem?
  
  runCluvfy has been correctly executed.
  
  I discovered on the second node (oracle02), there is no any daemon running. But on the local installation (oracle01) node:
  [[email protected] bin] #. / stat crsctl res-t--init
  --------------------------------------------------------------------------------
  TARGET STATE SERVER STATE_DETAILS NAME
  --------------------------------------------------------------------------------
  Cluster resources
  --------------------------------------------------------------------------------
  ORA.asm
  1 road to oracle01 online
  ORA.cluster_interconnect.haip
  1 oracle01 online
  ORA. FIU
  1 OFFLINE IN OFFLINE MODE
  ORA.crsd
  1 ONLINE OFFLINE
  ORA. CSSD
  1 oracle01 online
  ORA.cssdmonitor
  1 oracle01 online
  ORA.ctssd
  1 LINE intermediate oracle01 bad check return.
  ORA. DiskMon
  1 oracle01 online
  ORA.drivers.ACFS
  1 oracle01 online
  ORA.evmd
  1 OFFLINE IN OFFLINE MODE
  ORA.gipcd
  1 oracle01 online
  ORA.gpnpd
  1 oracle01 online
  ORA.mdnsd
  1 oracle01 online
  [[email protected] bin] #.
  
  
  How to make the next step? What is the difficulty so that my installation is successful.
  
  Thanks in advance.

  Hi Angelina,.

  I got this error when I tried to install Oracle RAC on VMware with unassigned shared disk. When I attributed it which fixed the problem.

  Kind regards
  Gennady

• Working at the Player VM image but not the vSphere

  Hi all

  I downloaded the Cloudera Quickstart 5.7 VM image and it works well on VM Player but does not work through vSphere.  I have downloaded all the files for the data store, right-click on the file in VMX to save it but when I turn on the virtual machine it says that it cannot find the VMDK file.  I checked the paths and everything seems fine for me.  I also removed the hard drive from the config and added it but who doesn't either.  I have included a picture of the error message I get from hovering over the error in the Web Client vSphere.

  

  I use vSphere essentially 6.0.  The VMDK is divided into 17 files with "s001' thru 's017" at the end of the file name, and there is a file name which is without the suffix.  When I download the last of 18 files all files "sXXX" disappear it is a single VMDK showing - I guess that vSphere worked it's a disc more of 17 files divided.

  I have another VM on the host/server underlying data store is fine.

  Any help very welcome!

  Best regards, Jim Hudd.

  After a lot of searching on Google and a little for being smart, I worked on how to get this race.  Is there something on rare records, who dislikes the host EXSi in accordance with article (https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2045616).  I had to do something slightly different from the explanation to the problem; instead of cloning of disk space (files *.s001), I had to clone the main VMDK file.  This has created a VMDK single flat file, allowing the virtual machine run.  As a quick guide to fix this problem:

  • Open a command shell to the ESXi host
  • The virtual machine directory
  • Take a copy of the VMDK files (just in case!)
    • mkdir orig
    • CP * orig vmdk
  • clone the disks to a new flat VMDK file
    • vmkfstools-i
      thin d | thick
  • Remove the old VMDK files
  • Remove the original virtual machine hard disk
  • Add a new hard drive for the virtual computer by using the new VMDK file

  Hope this helps someone else.

  Jim.

• Not seeing vSphere tags when you create custom in vROps groups

  I am creating groups custom in vROps 6.1 the use of vSphere tags. I had tags configured for a few days now, but when I try to set up a custom group that don't have any tags. When I "click to load more" nothing else loads. I guess I'm missing some sort of connection somewhere? Thanks in advance for any ideas!

  

  Thought I would try to restart the cluster because nothing was working. I took the cluster offline, restarted the replica, restarted the master and when everything is back to the top I have immediately seen tags in my custom group. Not sure why it worked, but I'm happy!

• lspci to detect i350t2 but not the vsphere

  I followed to adapters Intel®, VMware ESXi Server * driver and NVM Image compatibility information and chose only the version of the driver. It is installed successfully. Esxi is now while I'm cli and type:

  ~ # lspci | grep network

  0000:09:00.0 Network controller: Intel Corporation I350 Gigabit Network Connection [vmnic2]

  0000:09:00.1 Network controller: Intel Corporation I350 Gigabit Network Connection [vmnic3]

  0000:0f:04.0 network controller: Broadcom Corporation NetXtreme BCM5715 [vmnic0] Gigabit Ethernet

  0000:0f:04.1 network controller: Broadcom Corporation NetXtreme BCM5715 [vmnic1] Gigabit Ethernet

  It's ok, but then

  ~ # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 0000:0f:04.00 tg3 up to 1000Mbps Full 00:19:99:0 has: 34:2 has 1500 Gigabit Ethernet Broadcom Corporation NetXtreme BCM5715

  vmnic1 0000:0f:04.01 tg3 Down 0Mbps has a half 00:19:99:0: 34:2 b 1500 Gigabit Ethernet Broadcom Corporation NetXtreme BCM5715

  It is also missing in vsphere client = > network cards. This is also only Broadcom Corporation NetXtreme Gigabit Ethernet BCM5715. How to initialize completely I350t2? What is the problem?

  Strange, the so-called vmkernel detected and claimed the devices, by assigning them to vmnic2 and vmnic3 (see the "VMkernel name" in the detailed output of material), which means that the driver should be ok.

  You can run these commands? :

  # ethtool-i vmnic2

  # esxcli network nic get - nic - name vmnic2

  # grep-i /etc/vmware/esx.conf vmnic

  module system esxcli # get - module igb

  # esxcfg - module - retrieves the igb options

  # enum_instances VMware_EthernetPort root/cimv2

  You don't have a pass through vmdirectpath active on a virtual machine with these cards, right?

  Someone in a similar thread said that he was working for them after an update of the firmware of the NETWORK adapter, have you tried? : Re: Intel I350-T4 only recognized by Esx 5.5, not by 5.5 U2

  Download Intel® Ethernet Boot Utility connections, images PXE and EFI drivers

  If all else fails, so at this time I can only imagine that maybe there is some BIOS or NIC configuration server BIOS interfering here. In general, this could be a parameter associated with interrupt handling. Update the server BIOS can help too.

  Have you tried another host or move the NETWORK card to a different physical PCI slot? Also, you might consider upgrading to 5.5 U3 independently to know if this will fix the problem.

• data store is not accessible vsphere 4.0

  data store unavailable on vsphere 4.0... We have a server with connection zFCP on hitachi ams2100 datastore and have 2 LUNs connected 4 days ago, I try to restart my host. and all of a sudden one of my lun is not accessible, I already try to Reanalyze the data store. and nothing happens, I always get the error data store can not accessible. any body can help me please...

  is this LUN presented on othe so hosts? If so, then remove the host in question and add it again

  to do a new analysis...

• Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

  Hello. I try to add vmknic with frames in my distributed virtual switch.

  I read the vSphere command-line Interface Installation and reference Guideguide:

  "vicfg-vmknic - a-i DHCP"vmk5"

  I see the error message:

  Cannot add the vmkernel nic: a specified parameter was not correct.

  Vim.Host.VirtualNic.Specification.Ip

  What's wrong?

  I tried all the combinations of parameters with the same result.

  Ok! I've found a workaround.

  Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

  1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

  2 remove the VMKernel iSCSI/NFS to the DVS interface

  3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

  4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

  esxcfg - vmknic.pl - Server

  If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

  Enjoy!

  M

• What? My cluster is not compatible vSphere?

  OK so I checked the vmware compatibility guide and I can not see my (HP Proliant BL360 G1 with Intel Xeon X 5355) blades in accordance with vSphere:

  http://www.VMware.com/resources/compatibility/get_pdf.php?deviceCategory=Server

  Can anyone confirm?

  Thank you

  I can see the link to the survey Site that is generally 53xx series that is not supported by FT... No God

  We have those in your data center as well...

  Lars Liljeroth

  -

• vCenter 5.1.0b does not support vSphere ESXi 5.0.0?

  I came across a weird error today at work.

  Immediately after installing vCenter 5.1.0b, I tried to add a host to a data center newly created ESXi 5.0.0.

  I met an error that said, vCenter does not support the hosts of this type.

  I thought, really?  The compatibility matrix says it does.

  At this time, I left for the day and will answer on Monday.

  In the meantime, is someone met such a mistake?

  vCenter... can't stand the hosts of this type.

  Could you please provide the exact error message!

  At what stage of the wizard have "Add host" you received the error message?

  How the host is currently allowed? With the free license of the hypervisor?

  André

• Windows 7 32 bit / Firefox Fpl does not - "insufficient rights" - install tried several things invain

  I tried

  installation of Flash Player (several times) - no result - it downloads, but installation, it always says that I have sufficient administrator rights - which should not be real! I am the only user and have all the rights.

  I have this problem for a year and only with the Flash Player updates

  I tried to uninstall the old flashplayer first

  I tried to make a new account with - again - all rights

  I tried to disable Avast antivirus

  deactivation of Threatfire

  deactivation of both

  Unfortunately, nothing works

  What Miss me

  Who can give me some good advice please.

  Thank you!

  Tone

  Can you post the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash