4 usb ports - this device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)

Similar Questions

• Kindle Fire PC USB connectivity, the drivers for this device are not installed. (Code 28).

  I connect and transfer content from my computer to my Kindle all the time, but today when I plugged the Kindle my pc tells me that the device needed troubleshooting.  After you run the troubleshooter, I gives me this message:

  "The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  This has never happened before, and, no, I have not recently downloaded new applications, programs, updates or had a system crash. It was, as usual, a few things. Where it says "to find a driver for this device, click Update driver" which is non-interactive. I can see it, but you can't click on it. That's happened? What should I do?

  Scott.

  Hello Scott,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run this Microsoft fixit and check if it helps.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Please also try to update the device drivers by using the steps described in this article and check.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• This device does not work properly because Windows... this device. (Code 31)

  Hello buddies, how to solve this problem (code 31)

  USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  How can I solve this problem?

  In addition, you can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• Driver for old parallel port; This device has a problem: Code = 28 (0x1C)

  We organize a Dos based Windows 98 application and I need to find a driver for the integrated parallel port. The motherboard is an ASUS P5GD2-TMX/S. Both the local provider and ASUS only provide XP and more drivers for the motherboard. How can I determine the manufacturer of the parallel port and download the driver directly from their site? I done this before for the serial port and downloaded and installed a Sunnix driver, which worked.

  I did some research on the North Bridge, South bridge and the Super i/o chip set, but to no avail. Here is a copy of the output of sysinfo32.

  [Peripheral problem]

  Unknown device
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * INT0800\0
  Alloc resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  Memory address range: Base = 00000000 00000000 Min End = x x = xFFB80000 Max = xFFBFFFFF
  Driver: Driver is not installed

  Standard 101/102-key or Microsoft Natural Keyboard
  Keyboard
  This device has a problem: Code = 27 (0x1B)
  System failure: try changing the driver for this device. If this does not work,
  see the documentation for your hardware.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0303\0
  Alloc resources: None
  Forced resources: None
  Start resources: no
  Filtered resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Core resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Driver: Keyboard\0003
  Driver date: 23/04/1999
  Driver: idvkd.sys
  File size: driver not installed
  File date: driver not installed
  Driver: hidparse.sys
  File size: 44368 (0xAD50)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidclass.sys
  File size: 23520 (0x5BE0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidvkd.sys
  File size: 5088 (0x13E0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.1998

  PCI card
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_2668 & SUBSYS_81A71043 & REV_04\BUS_00 & DEV_1B & FUNC_00
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  Universal Serial Bus PCI
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_265C & SUBSYS_265C1043 & REV_04\BUS_00 & DEV_1D & FUNC_07
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  PCI system management bus
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_266A & SUBSYS_266A1043 & REV_04\BUS_00 & DEV_1F & FUNC_03
  Alloc resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Forced resources: None
  Start resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  HW revision: 004
  Driver: Driver is not installed

  The motherboard seems to be Intel 915P chipset.

  Don't know if it will help, but try installing the software Intel(r) utility V6.0.1.1002 of Installation for Windows 2000/XP/2003 (under Win2K - others) for P5GD2 motherboard from the following link that appears in support of Windows 98 Second edition:

  http://www.ASUS.com/motherboards/P5GD2/HelpDesk_Download/

  Then restart the computer.

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

  Original title: WAN miniport driver

  A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I use windows 8 in my sony vaio
  MODEL - SVE15123CNW

  Hi Praveen,

  Perform the steps suggested by Nirmal S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

  Answer please if you have any questions.

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The drivers for this device are not installed. (Code 28) for the ALL-IN-WONDER RADEON 7500

  I ran a windows update and a hardware update for ALL-IN-WONDER RADEON 7500 was available. I wasn't sure what it was, but I did research some information about drvier... or windows hardware and device driver has informed me that it detects what device(certain hardware) I have on my computer to install the update. (I don't know if it's true) anyway, since then, when I start my computer, the 'new hardware found' window. After investigating on I found it cause the ALL-IN-WONDER RADEON 7500 (I don't think I know what it is). There was my this info in my device (6 times) Manager: its an unknown device located in the ALL - IN - WONDER RADEON 7500 and it states that "the drivers for this device are not installed. (Code 28) "what is it and how to fix it." I don't know if I'm to disable or uninstall. As I said, these updates I got Windows update manager and I'm guessing that it was not successful.

  That is, what it does and how can I solve this problem?

  Thanks in advance

  Try to go to this link which is AMD and download the drivers for it.

  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.5&product=2.4.1.3.14.3.2&ContentType=GPU+download+detail&OSType=Windows+XP+-+Professional%2fHome&keywords=&items=20

  The question to be a tunner TV that you have installed in your computer that is missing the drivers at startup. You receive the error because when your computer starts, it loads this device to make it ready for use, when you want.

  Good luck! Please rate me upward if you find my post helpful. Thank you!