Now for the construction of three

Similar Questions

• Need help now for the live installation

  Need help now for the live installation

  Hello

  As described in the question, I understand that you need help. I will definitely help you however, I would be grateful if you could help me with more information to better understand the problem and resolving it.

  1. What is the problem you are experiencing during installation?

  2. That you install? Any software or operating system?

  3. How you try to install the software/Os/application?

  If you need live support from Microsoft then you can click on the link given below and check if it helps.

  https://support.Microsoft.com/en-us/contactus/

  Hope that this help, please write us back for any further assistance on this point, we will be happy to help you further.

• My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted the bridge and PS, and I rest

  My nail of the thumb in bridge always have evidence the adjustments I make to RAW files. Now, for the first time they have not. However when I select the images adjusted and open them in CS6 adjustments are there. I restarted bridge and PS, and I restarted the computer (Mac). Still the same problem.

  I thank assani, but it wasn't the answer. The problem was, I finally understood, that the "option for generation of quality and preview thumbnails" wasn't on "high quality" as it usually is. I have no idea how this happened as I never change this option.

  Thanks a lot for your help.

  Mitchel Gray

• I paid for the subscription of three years last year and I was not able to use the progam... currently I moved I don't know if I can find my serial number, even if I can have pilled upward through my bank statements

  last year, I paid for the subscription of three years, I have used or been able to use the program, even if it was paid because I moved from the place where I myself was when I bought the program and I've lost my serial number, or can I get a refund because she was taken out of my account.

  Hi christineg24805464,

  You can check under your active subscription account: Adobe ID

  Serial key is not required to activate the subscription.

  It can be activated using your e-mail address with which you bought the subscription and the Adobe password.

  Kind regards

  Claes

• Fort Wayne area users! Sign up now for the biggest event VMUG WORLDWIDE!

  Demo 4 - Indianapolis VMUG days User Conference

  Clear your calendar for Thursday, July 28, 2011, and to attend the fourth annual Conference of the Indianapolis VMUG demo days. Every year it gets bigger and better, and this year is no exception. This event is now considered to be the biggest event VMUG WORLDWIDE!

  For those who never participated in a previous demonstration days event, think of it as a "mini VMworld". Ideally located in downtown Indianapolis, come join your fellow VMware users during this event all-day for exhibitions, demonstrations and in-depth technical sessions.

  Need other reasons to attend? Here are a few:

  • More than 30 educational sessions
    
  • Group of experts, featuring David Davis, Mike Laverick, Scott Lowe, and Vaughn Stewart
    
  • Networking Lounge to relax
    
  • Practical exercises with EMC and ThinApp PowerCLI
    
  • Showroom with over 70 partners
    
  • Training VMware including: A Practical Guide to vCenter operations, Performance Best Practices for vSphere, ThinApp Dive Deep, demystify the Secure Private Cloud, Cloud in the real world and the transition to ESXi
    
  • Breakfast and lunch
    
  • A lot of business gifts
    
  • More surprises
    

  Visit the event details page to save and review the agenda of the full event and a list of all the sponsors of the event.

  http://www.myvmug.org/e/in/Eid=75 & source = 5

  Twitter: @IndyVMUG and #DD4ivmug

  I create a new account at MYVMUG and registered for the event at Indy.

  I'm looking forward to, but should be back in Fort Wayne bu 18:00, so I'll leave early.

  Thank you for your help

  Bryan Smith

• -Error code 646 - repeated the failures (now for the last two months) to install updates Windows 7 S/W, possibly after installation of Office 2010?

  For the last two months - easrly November, when stopped down, I saw 10 message updates are being installed. This follow-up installation of Office 2010 (download from Web site), who bought Office 2007 earlier this year, and by choosing to take the free update promised for 2010.

  On the control, I find that whenever all ten updates failed to install (error code 646)

  Concered updates are KB2202188; KB982726; KB2289161; KB2289078; KB2413186;  for Office 2010

  and KB2345000 - Word 20120.

  KB2409055 - 2010 Editor;

  KB2289116 - Social connector;

  KB2431831 - knitting 9;

  KB2433299 A Note;

  Any thoughts there?

  Steve L

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121http://snipurl.com/164ypp>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• ORA-17629: when you try to use database active for the construction of Eve

  Hey guys, I did research on it for hours and I tried different things but when even cannot get a handle of what Miss me...
  
  I'll try the 11 g physical creation Eve to help "...". of the active database"instead of the old way. I keep running into a brick wall. Any help would be appreciated.
  DB version is 11.2.0.2 on AIX
  
  This is what has been done...
  1 created pfile on primary and standby
  2 created orapwd file and transferred to the standby
  3 standby db is nomounted (startup nomount) and listener is running
  
  cemabc_p = main forum nom_unique
  cemabc_s = unique name of instance eve
  
  im commands running in mode ensures:
  RMAN target backup_admin/temabc@cemabc_p catalog rman/qaabc@rmnabc
  
  AUXILIARY backup_admin/temppw@cemabc_s connection
  RMAN > DUPLICATE TARGET DATABASE BEFORE database NOFILENAMECHECK active;
  
  From February 22, 13 Db double
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 7 type of device = DISK
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile ' / oracle/app/oracle/product/11.2.0.2/dbs/orapwcemabc' auxiliary format
  ' / oracle/app/oracle/product/11.2.0.2/dbs/orapwcemabc';
  }
  execution of Script memory
  
  From backup February 22, 13
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 112 type device = DISK
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 22/02/2013 14:53:52
  RMAN-05501: abandonment of duplicate target database
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the ORA_DISK_1 channel at 22/02/2013-14:53:52
  ORA-17629: unable to connect to the remote database server
  ORA-17629: unable to connect to the remote database server
  
  
  
  What ive tried so far... I tried to connect from the primary database:
  adcabc1: / home/oracle/dba > rman target backup_admin/temabc catalog rman/qabc@rmnabc
  
  Recovery Manager: release 11.2.0.2.0 - Production on Fri Feb 22 14:52:51 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: CEMABC (DBID = 4229695208)
  connected to the recovery catalog database
  
  RMAN > catalog resync db_unique_name all;
  
  
  from full resynchronization of the recovery catalog
  full complete Resync
  
  from full resynchronization of the recovery catalog
  full complete Resync
  
  from full resynchronization of the recovery catalog
  full complete Resync
  
  
  
  Still no luck.
  I have cemabc_p and cemabc_s both primary and standby tnsping succuessfully.
  
  Im sure I'm missing a step, if it didn't there was more information need... Let me know

  Ok

  I guess that

  connected to target database: CEMABC (DBID=4229695208)
  connected to auxiliary database: CEMABC (not mounted)
  

  On the remote server's right? If so, it shows that RMAN was able to connect to the main server and the local static connection. So the problem is probably that the principal server cannot connect back.

  You need an entry for the CLONE in your TNSNAMES file. ORA on both servers. Can you confirm this?

  Can you post the listener.ora for clone entry?

  I'm double control it

  rman target backup_admin/temabc@cemabc_p catalog rman/qaabc@rmnabc
  

  (Above is odd)

  Mine:

  rman target=sys/@recover2 auxiliary=sys/@reclone
  

  I use SYS/password both for him to work.

  Also, make sure that these are defined

  listener.ora
  INBOUND_CONNECT_TIMEOUT_ = 120
  
  sqlnet.ora
  SQLNET.INBOUND_CONNECT_TIMEOUT = 120
  

  Restart the listeners later

  Best regards

  mseberg

  Published by: mseberg on February 22, 2013 15:10

  Published by: mseberg on February 22, 2013 15:11

• Chicago area Vmware users! Sign up now for the biggest event VMUG WORLDWIDE!

  Demo 4 - Indianapolis VMUG days User Conference

  Clear your calendar for Thursday, July 28, 2011, and to attend the fourth annual Conference of the Indianapolis VMUG demo days. Every year it gets bigger and better, and this year is no exception. This event is now considered to be the biggest event VMUG WORLDWIDE!

  For those who never participated in a previous demonstration days event, think of it as a "mini VMworld". Ideally located in downtown Indianapolis, come join your fellow VMware users during this event all-day for exhibitions, demonstrations and in-depth technical sessions.

  Need other reasons to attend? Here are a few:

  • More than 30 educational sessions
    
  • Group of experts, featuring David Davis, Mike Laverick, Scott Lowe, and Vaughn Stewart
    
  • Networking Lounge to relax
    
  • Practical exercises with EMC and ThinApp PowerCLI
    
  • Showroom with over 70 partners
    
  • Training VMware including: A Practical Guide to vCenter operations, Performance Best Practices for vSphere, ThinApp Dive Deep, demystify the Secure Private Cloud, Cloud in the real world and the transition to ESXi
    
  • Breakfast and lunch
    
  • A lot of business gifts
    
  • More surprises
    

  Visit the event details page to review the agenda of the full event and a list of all the sponsors of the event.

  http://www.myvmug.org/e/in/Eid=75 & source = 5

  Twitter: @IndyVMUG and #DD4ivmug

  Impatient for there, f-seal. Receive a lot of good buzz on how big / detail this is going to be.

• What is the correct process for the construction of webworks + apps cordova with ripple?

  Hello, I'm developing an application targeting os6 and 7 devices using phonegap and tests through the emulator to ripple. The emulator seems to be missing the package for blackberry in cordova apache mode option. Switching mode webworks brings up the option. However, the deviceready event that cordova expects is not raised in this mode. Therefore, do not start apps according to the deviceready event.

  Is there something that I am missing?

  WebWorks and Cordova are two separate web platforms.

  WebWorks mode, you will be able to imitate WebWorks APIs belay the WebWorks SDK to your content of HTML5 (sign) package in a BlackBerry application.

  In Cordova mode, you will be able to emulate the Cordova APIs (including the deviceready), however there is no integration with the Cordova SDK for real packaging process. You will need to follow the documentation of Cordova for packaging and signing.
  http://Cordova.Apache.org/docs/en/3.1.0/guide_platforms_index.MD.html#platform%20Guides

• How to install Qt creator for the construction of projects in the sample first Pro or AE (which are projects VS and xcode)?

  Hello world

  I would like to install a Qt creator for Premiere Pro or AE files SDK projects. So far, I have not found any related topics and I was wondering what are the major steps or tips to set up the project.

  So far, all the samples I tested work perfectly on mac or windows using VS and xcode.

  THX in advance

  Sorry, I have no experience with QT Creator; you're the first developer to seek such intervention. If all goes well, you can create a QT Creator project around the existing samples of win/mac.

• ExportPDF used to work perfectly to convert PDF, XLSX, now for the exact same file, it doesn't work anymore

  I bought this for Adobe Reader ExportPDF option and it used to convert my PDF files perfectly to XLSX files.  I went back to the old files that I previously exported, and the tool does more to export my PDF.  Help, please!

  Hi josephm90874850,

  Its a file support the format https://helpx.adobe.com/acrobat-com/kb/supported-file-formats.html.

  Make sure you that you use Adobe Acrobat Reader DC Acrobat Reader DC Learn & Support to export PDF files using Acrobat Reader. Export PDF to Acrobat Reader DC.

  If not try to use the service online at https://cloud.acrobat.com/exportpdf

  Kind regards
  Nicos

• Support for the construction of an interactive application form

  I am VERY new to livecycle and everything I learned is by Googling, so I'm sorry if this is a stupid stupid question. I am trying to build a registration form for our patients. I want to make it as "easy" for them as possible. So I have a built draft - not necessarily in the order yet - but I have to do the tab is set to pre-fill fields according to drop-down list which element is selected. And have a section appear when 'yes' is selected.

  For example: the first section is the section "Patient Information." The patient would fill this point, then when they get down to the "patient insurance information" section there is a drop-down list named 'relationship to the Patient '. If they choose "individual" I want all the news in the section 'Patient Information' to automatically fill in the fields. If they choose 'Spouse' I want the last name, address and personal phone number to automatically populate. Bottom of the page are "secondary insurance" and "insurance" sections This is where I want to store only items up if they patient chooses "Yes" to the questions.

  Clear as mud?

  How in the world do I do that? Are there webinars or tutorials / videos that show step by step?

  Thank you, Julia

  

  What you ask is feasible.

  Selected value will need script to fill the sections based on the drop-down list. All individual script commands are documented, but then put together in the combination that you need is not. This theme was examined and samples have been built several times on this forum. I would like to start with a search on this forum.

  There are also many books written as well as the examples provided in the product that can show you the concepts involved with scripts, but no one can predict exactly what you're doing so that you will not find an exact sample that does what you want.

  The ability to show/hide the different sections of the form has also been discussed and written for her on both samples forum.

  I suggest that you dive in a give a try and if you get stuck ask more specific questions on this forum and people who regularly watch the forum will help out.

  Paul

• Installed update CC animate application now for the connection when a student connects iMac

  Update animate CC as administrator on student iMac, now when it is open to ask to connect how to stop it

  Please refer to:

  Software license contract reappears after clicking on accept

  Creative cloud applications ask me to connect whenever I run an application

  Concerning

  Stéphane

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services