"Null" or no value at all in the NMH405

Similar Questions

• Through the sum of the values in all of the array of Boolean one and zeros

  Hello.

  I have an array of Boolean which I have converted one and zeros. I just want to the sum of all the elements in this table (in other words, giving the number of 1 in the table). I used the feature to add items, but I get a negative value. I checked there were not all values except one and zero (I know it shouldn't be) using max and min. I don't know how a negative value has been calculated - any ideas.

  Thanks in advance

  Before adding elements, convert the table I32 or I64. The output of the primitive add-on is of the same type that the entry and if the entry is an I16, then you cannot have a value greater than 32,767 or value will wrap around (what happened in your case.

• Change quick values to 'ALL' of 'all values in the column.

  
  Hello

  I want to change the 'all values in the column' value for 'all' in the quick view of dashboard.

  I went to the location following: < MW_HOME > / Oracle_BI1/bifoundation/web/msgdb/l_en/messages /.

  But I am unable to determine which xml file to be changed.

  Help, please.

  Just in case where to check Srinivasan Software Solutions Pvt.Ltd.: [OBIEE 11 g] customization invites "All THE values in column" Custom value

• DefaultGateway value disappears completely from the registry after the computer restarts

  My computer had problems. Whenever I restart my computer, the default gateway is missing from the ipconfig command, it's just an empty space instead. And with that, whenever I restart I provoke a conflict of ip to the rest of the computers on the network and the router needs to be reset to fix. I tried looking for answers and I saw a lot saying to go to
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interface\DefaultGateway. Well, I go in the folder, but there is no value at all DefautGateway, the missing values. No there is no number when I go in the chain, but there is no period of string. What should I do?

  Here's what the command ipconfig looks like when the internet works.  Hope that these peaks of work.

  http://ImageShack.us/photo/my-images/36/capturewpc.jpg/

  Looks like this when it is not, although this image is from another site, but I just want to show that the default gateway is completely empty.

  http://ImageShack.us/photo/my-images/9/missinggateway.PNG/

  I would like to show a picture of the registry too, well, idk if it was stupid, but I put in a new thing of value for the DefaultGateway as was shown on a site so atm, it is not happened, but. This is the registry when the internet work, imagine that the DefaultGateway chain isn't here since it wasn't until I stuck in there.

  http://ImageShack.us/photo/my-images/6/capture1sz.jpg/

  I can't find anywhere, do anything about what to do when the string DefaultGateway is completely absent from the registry. I'm not a computer tech so I really need help. I hope this x.x. made to sense all the

  Hi HeatherOlexy,

  Please use the mentioned link that helps you reset TCP below / IP settings.

  http://support.Microsoft.com/kb/299357

  Hope this information helps.

• Error in the logs when a workflow running on the web client of vSphere WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__

  I see this error:

  WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__]

  pop up in newspapers of vCO a few times on a workflow when I try to run it from the web client of vSphere.  I wonder if it is somehow contributing to the time it takes to render the page.  We never saw it or someone has a clue about what might be the cause.  Newspapers are clean when I run the workflow of the vCO client.

  TQCallerParameter is a kind of decorator that is not exposed in the REST API. This warning message is safe and does not affect performance at all.

  You don't see it during execution of the workflow of vCO customer because the customer vCO does not use the REST API and therefore does not need to run conversions Decorator.

• Load the process returns a null value but on refresh the values of loads? !!

  Hi all

  With the help of apex 4.1.1 oc4j 11g Linux

  I'm building a feature that allows you to register by e-mail.

  Page 1

  The user enters a name email address ,& the last statement name Insert is executed

  Select count (*) in c_email - if 0 then the person does not exist and is permitted

  of sor_notification_person

  where sor_notification_person. EMAIL_ADDRESS = P_S_EMAIL_ADDRESS;

  If c_email = 0 then

  -Package.procedure send email and fact the insert

  SOR_NOTIFICATIONS_PKG. signup_person (P_S_EMAIL_ADDRESS = > P_S_EMAIL_ADDRESS,)

  P_S_FIRST_NAME = > P_S_FIRST_NAME,

  P_S_LAST_NAME = > P_S_LAST_NAME,

  P_S_CONFIRMED_EMAIL = > P_S_CONFIRMED_EMAIL,

  P_S_SESSION = > P_S_SESSION,

  P_S_APP_ID = > P_S_APP_ID,

  P_B_SUCCESS = > P_B_SUCCESS);

  Page 2

  Clicking or copying pasting the URL received in e-mail. I have on the loading process that verifies the checksum value in DB and fills in the data.

  declare

  number of CT ;

  P31_checksum(Varchar2) 30).

  E-mail varchar2 (90);

  What varchar2 (40);

  L_Name varchar2 (40);

  P31_TEST(Varchar2) 40).

  Start

  : P31_TEST := null;

  SELECT count ()*) in ct

  OF SOR_NOTIFICATION_PERSON

  où SOR_NOTIFICATION_PERSON. checksum =:C;

  DBMS_OUTPUT. put_line ()ct);

  if CT > 0

  then

  SELECT SOR_NOTIFICATION_PERSON. email_address SOR_NOTIFICATION_PERSON. name, SOR_NOTIFICATION_PERSON. last_name in l_name what Email

  OF SOR_NOTIFICATION_PERSON

  où SOR_NOTIFICATION_PERSON. checksum =:C;

  : P31_TEST := 'Y ';

  : P31_EMAIL_ADDRESS:= Email;

  : P31_FIRST_NAME := what;

  : P31_LAST_NAME:= l_name;

  else : P31_TEST := 'n';

  (- dbms_output. put_line () P31_TEST);

  end if;

  end ;

  Problem when I view the item hidden, I can see the value of checksum, but the P31_test is always null in load. When I hit refresh page P31_test valid and displays the value.

  The two elements are the value only when the value in session state is null.

  What could be the reason because it does not load even the process is defined as load before region / once per page visit...

  Thanks for your help.

  Okay - not sure then. On a new blank page I can have processes assign a value to the session state from the element and the element will have this value when the page is rendered (at least with this type of source). Work of dynamic actions. As I expect. I don't know what happens next 'unfair '.

  I'll only come back tomorrow, but here are a few tips:

  • create a workspace on apex.oracle.com and upload your page there. Share of the developer credentials and the name of workspace with us. In this way may inspect and do not need to do the back and forth until we reached something special we both lost from view.
  • When the page is loaded and you hit the session in the developer toolbar, what is the State of P31_TEST? Is it worth?
  • try to run the page in debug and see if you can spot something happens with the session state from P31_TEST - maybe you'll come across something

• Count of values in all the columns when there is no group by attribute in table

  I have the table which contains attributes of bucket 10 for a product_id. Each segment can contain values of x 3 x 20.
  

  create table products_quality 
  (PROD_ID varchar2(5),
  bkt1 varchar2(3),
  bkt2 varchar2(3),
  bkt3 varchar2(3),
  bkt4 varchar2(3),
  bkt5 varchar2(3),
  bkt6 varchar2(3),
  bkt7 varchar2(3),
  bkt8 varchar2(3),
  bkt9 varchar2(3),
  bkt10 varchar2(3));
  
  Insert into products_quality values ('332','x12','x12','x12','x12','x12','x12','x12','x12','x12','x12');
  Insert into products_quality values ('2375','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('2558','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('2729','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('2833','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('2970','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('3115','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('3251','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('3580','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('4511','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('5904','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('6875','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('6982','x20','x20','x18','x18','x18','x18','x9','x9','x9','x9');
  Insert into products_quality values ('6983','x20','x20','x18','x18','x18','x18','x12','x12','x12','x12');
  Insert into products_quality values ('22848','x20','x20','x18','x18','x18','x18','x6','x6','x6','x6');
  Insert into products_quality values ('8818','x16','x16','x16','x16','x16','x16','x16','x12','x12','x12');
  Insert into products_quality values ('11478','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('12783','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('19742','x18','x18','x18','x18','x18','x8','x3','x3','x3','x3');
  Insert into products_quality values ('20074','x19','x19','x19','x19','x19','x19','x16','x10','x10','x10');
  Insert into products_quality values ('20093','x19','x19','x19','x19','x16','x16','x16','x10','x10','x10');
  Insert into products_quality values ('22392','x19','x19','x19','x19','x16','x16','x16','x10','x10',null);
  Insert into products_quality values ('22392','x19','x19','x19','x19','x16','x16','x16','x10','x10',null);
  Insert into products_quality values ('23287','x19','x19','x19','x16','x16','x16','x13','x9','x9',null);
  Insert into products_quality values ('23794','x20','x18','x18','x9','x9','x9','x9','x9','x9','x9');
  Insert into products_quality values ('23957','x18','x11','x11','x11','x11','x11','x7','x3','x3',null);
  Insert into products_quality values ('23957','x18','x14','x14','x14','x14','x10','x6','x6','x6',null);
  Insert into products_quality values ('26886','x10','x10','x10','x6','x3','x3','x3',null,null,null);
  Insert into products_quality values ('27794','x20','x20','x18','x11','x11','x11','x9',null,null,null);
  Insert into products_quality values ('27795','x20','x20','x18','x9','x9','x9','x9','x9','x9',null);
  Insert into products_quality values ('27795','x12','x12','x12','x12','x12','x12','x12',null,null,null);
  Insert into products_quality values ('28013','x20','x13','x13','x13','x13','x13','x13',null,null,null);
  Insert into products_quality values ('28270','x19','x19','x19','x14','x14','x11','x8',null,null,null);
  Insert into products_quality values ('28732','x20','x13','x13','x13','x13','x13','x13',null,null,null);
  Insert into products_quality values ('29042','x20','x18','x9','x9','x9','x9','x9',null,null,null);
  Insert into products_quality values ('29279','x20','x20','x18','x9','x9','x9','x9',null,null,null);
  Insert into products_quality values ('29279','x20','x13','x13','x13','x13','x13','x13',null,null,null);
  Insert into products_quality values ('29487','x20','x20','x20','x19','x9','x9','x9',null,null,null);
  Insert into products_quality values ('29550','x19','x19','x19','x12','x12','x12','x9',null,null,null);
  Insert into products_quality values ('29833','x20','x12','x12','x12','x12','x12','x12',null,null,null);
  Insert into products_quality values ('30174','x5','x5','x5','x5','x5','x5','x5',null,null,null);
  Insert into products_quality values ('30339','x20','x9','x9','x9','x9','x9','x9',null,null,null);
  Insert into products_quality values ('30339','x13','x13','x13','x13','x13','x13','x13',null,null,null);
  Insert into products_quality values ('32017','x15','x15','x15','x9','x9','x9','x9',null,null,null);
  Insert into products_quality values ('34680','x20','x20','x19','x9','x9','x9','x9',null,null,null);
  Insert into products_quality values ('34680','x20','x12','x12','x12','x12','x12',null,null,null,null);
  Insert into products_quality values ('39083','x20','x18','x12','x12','x12','x12',null,null,null,null);
  Insert into products_quality values ('45800','x20','x20','x18','x12','x12','x12',null,null,null,null);
  Insert into products_quality values ('47650','x12','x12','x12','x12','x12',null,null,null,null,null);

  I want to count the appearance of each value in each of the compartments. The result is as follows:
  

  value     bkt1     bkt2     bkt3     bkt4     bkt5     bkt6     bkt7     bkt8     bkt9     bkt10
  x3     0     0     0     0     1     1     2     2     2     1
  x4     0     0     0     0     0     0     0     0     0     0
  x5     1     1     1     1     1     1     1     0     0     0
  x6     0     0     0     1     0     0     2     2     2     1
  x7     0     0     0     0     0     0     1     0     0     0
  x8     0     0     0     0     0     1     1     0     0     0
  x9     0     1     2     7     8     8     11     4     4     2
  x10     1     1     1     0     0     1     0     17     17     15
  x11     0     1     1     2     2     3     0     0     0     0
  x12     3     5     6     8     8     7     4     3     3     3
  x13     1     4     4     4     4     4     5     0     0     0
  x14     0     1     1     2     2     0     0     0     0     0
  x15     1     1     1     0     0     0     0     0     0     0
  x16     1     1     1     2     18     18     18     0     0     0
  x17     0     0     0     0     0     0     0     0     0     0
  x18     3     4     9     4     4     3     0     0     0     0
  x19     20     20     21     18     1     1     0     0     0     0
  x20     18     9     1     0     0     0     0     0     0     0

  How can I write an SQL to do this?
  
  Thank you.

  Hello

  The problem in my previous query was SELECT DISTINCT : the SEPARATE must not have been there.

  And I missed the party, including the values (such as 'x 4') which do not appear in the data. Sorry about that.
  I don't know how to do this with a solution UNPIVOT.

  Here's something (very similar to the idea of Michaels) who will work in Oracle 9 (or higher):

  WITH       all_values  AS
  (
       SELECT     'x' || LEVEL     AS val
       ,     LEVEL            AS sort_order
       FROM     dual
       WHERE     LEVEL     >= 3          -- Lowest number to include
       CONNECT BY     LEVEL <= 20     -- Highest number to include
  )
  SELECT     a.val
  ,     NVL (SUM (CASE WHEN a.val = p.bkt1  THEN 1 END), 0)     AS bkt1
  ,     NVL (SUM (CASE WHEN a.val = p.bkt2  THEN 1 END), 0)     AS bkt2
  ,     NVL (SUM (CASE WHEN a.val = p.bkt3  THEN 1 END), 0)     AS bkt3
  ,     NVL (SUM (CASE WHEN a.val = p.bkt4  THEN 1 END), 0)     AS bkt4
  ,     NVL (SUM (CASE WHEN a.val = p.bkt5  THEN 1 END), 0)     AS bkt5
  ,     NVL (SUM (CASE WHEN a.val = p.bkt6  THEN 1 END), 0)     AS bkt6
  ,     NVL (SUM (CASE WHEN a.val = p.bkt7  THEN 1 END), 0)     AS bkt7
  ,     NVL (SUM (CASE WHEN a.val = p.bkt8  THEN 1 END), 0)     AS bkt8
  ,     NVL (SUM (CASE WHEN a.val = p.bkt9  THEN 1 END), 0)     AS bkt9
  ,     NVL (SUM (CASE WHEN a.val = p.bkt10 THEN 1 END), 0)     AS bkt10
  FROM               all_values         a
  CROSS JOIN      products_quality  p
  GROUP BY  a.val
  ORDER BY  MIN (a.sort_order)
  ;
  

  If you have a real table with one line per possible Val, then don't need it the all_values questioning.
  It would probably be a good idea to have such a table. You can use it for foreign key constraints, for example.

  Thanks for posting the CREATE TABLE and INSERT. That makes things a lot easier.
  I'm sorry to complain about having too many examples of data. It is quite easy to this problem of a few lines in comment and ignore some columns. It is often better to have too much than nothing at all.

• How do you find the average value of all the data between two points on a single channel

  I'm tring to calculate the average value of all data points in a single field between two distinct points

  I rasthaus an illustration.

  Hi smoothdurban,

  I thought you wanted to specify the area of interest with the sliders of the band.  If you rather automatically define the area of interest based on thresholds, etc., we cannot see the interactive nature of the example I sent.

  What are the criteria used to determine the start and end of the region of interest lines?

  I would be able to type this out for you if you sent a representative data set ([email protected])

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• BlackBerry Z10 well defined, I can't get the phone to ring and vibrate as the default value for all calls. I can put individual contacts, but I want to ring and vibrate for all.

  Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks

  Sorry, I found the answer in the manual

  "Change your ringtone, sounds or alerts.

  GoTo settings\notifications to the bottom of the screen select application\phone

  You can activate vibrate out there, put the ringer default etc.

• [ADF, JDev12.1.3] SelectOneChoiche created from VO instance with 3 fields: how to retrieve the value of all the fields of the selected element?

  Hallo,

  I defined a VO with 3 fields (A, B and C) and I would like to create a SelectOneChoiche that shows only the field as options from this instance of VO.

  In a managed bean, I need to retrieve the values for all areas (A, B and C) of the item selected by the user.

  I started dragging the entire VO instance to UI to create a SelectOneChoiche (in which I have chosen to show only the to field).

  Then, I created a for the SOC ValueChangeListener read the values A, B and C of the selected element, but the only thing I've done is to get the displayed value:

  System.out.println((String) ((RichSelectOneChoice) FacesUtils.findComponent("MySoc")).getValue());
  

  You kindly help me?

  Thank you

  Federico

  Federico, sorry I didn't see your answer.

  As you use 12.1.3 you can do this more easily than the code that I posted before. You can use

  {} public void onCountrySelection (ValueChangeEvent valueChangeEvent)

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  the newindex in not necessary, but ok let's get it (must be equal to the CountryId, the pharmacokinetics of the binding of the lov

  String newindex = (String) valueChangeEvent.getNewValue ();

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  The form that I use is based on the location of the HR DB schema table. The CountryId is configured in the view object to display a lov based on the campagneVoir. This view contains thre CountryId, CountryName and RegionId attributes.

  If you want to get to the attributes of an action listener you can use this code

  {} public void onGetSelectedCountryLov (ActionEvent actionEvent)

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  You must add the valueChangeListener and at least add the lines

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  to ensure that the selected line is available when you click the button.

  And set autosubmit'= true for the field in the UI that displays the LOV.

  Timo

• Change the value of all the keyframes (Animation-tween)

  Hello

  There is the posibility to change a value in all selected keyframes?

  I have two boxes:

  Left with a rotation animation,

  Right with animation of position.

  I know with the white arrow, I can select the 'path' and change the position.

  But how can I change the position of an object without animation of position?

  Thank you!

  

  I don't really understand what you're showing. In your layer of mc-Hello, I see four key frames. When you first highlight the 'Hello' layer shows a zoom with no change in position effect. You try to move the 'Hello' zooms in from the central location to the upper right corner?

  If that's what you want to achieve, you must select all instances of edits to move the entire animation. A simple way to do it is to slide the selection around the entire animation tool once you select Edit several images. The way you select in your example, you are only selecting one instance to a keyframe and spend only one.

• Repeat parent node values in all rows of the child

  In the xml editor, how we could repeat the parent values in all rows of the child in Model Builder if there is more than one query in the sql report.

  Try

  
  

  or post the output example

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• Updated value Mananger as empty in the person's file all import the csv data

  Updated value Mananger as empty in the person's file to import everything based on a value in the csv file csv data

  Your model looks good. Subcode is may not be not necessary. below would be the solution to meet the requirement.

  1. to your rule mapping for importing data, keep it but remove the mapping to UID_PersonHead

  2 2 modifier change over mapping rules, delete all but keep PK (isKey) and map the domain manager to UID_PersonHead

  3. add conversion script in the field of cartography to UID_PersonHead, as

  If Manager (e.g., empID) exists in person and IsInactive = False Then

  Value = $Manager$

  On the other

  Ignore UPDATE

  EndIF

  4. ensure in 2nd rule of mapping only update checked, add should be DISABLED

  5 finishes 2nd mapping XML to generate a new script

  6. update your data import process to add another step to update with the new script manager

  HTH

• Single request for the display of all, but the values of 1 column for all tables

  Hello
  
  All tables have the column SYS_CREATION_DATE.
  But I don't want to not display the value of this column
  
  Can anyone suggest a way in which I could achieve this?
  
  Oracle version: 11 GR 1 material
  OS: SunOS
  
  
  See you soon,.
  Malika
  
  Published by: user9131570 on July 6, 2010 19:57

  user9131570 wrote:
  @Tubby

  I * table-wise display the values of all but 1 columns (SYS_CREATION_DATE) in my database.*

  I need it to compare to another data base for all these values.

  I would like to make a wild guess at what you are getting.

  In view of these two tables

  create table emp
     (empid number,
      empname varchar2(15),
      empaddr   varchar2(15),
      sys_creation_date date);
  --
  create table dept
     (deptid number,
      deptmgr varchar2(10),
      sys_creation_date date);
  

  you want to combine somehow

  select empid,
           empname,
           empaddr
  from emp;
  

  with

  select deptid,
           deptmgr
  from dept;
  

  in a single sql statement?