Through the sum of the values in all of the array of Boolean one and zeros

Similar Questions

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I delete all emails read without highlighting each one and delete it

  Original title: how to remove the old E-mail

  How can I delete all emails read without highlighting each one and remove it.  You want to remove them all at once.  I use Windows 7 and Windows Live Mail 2011

  To remove all the: select one and Ctrl + A will highlight all. -Delete.

  To delete a section: highlight the first one you want to remove. Scroll to last and click while holding down the SHIFT key. -Delete.

  To delete several messages that alternate: hold down the CTRL key while you click each message in order to highlight. -Delete.

  To empty the remove items, click on it and there will be an X to the right.

  SHIFT + DELETE bypasses the deleted items folder.

• Don't know what updates I need through the center of update. And get the following error message popup every minute, wuauclt.exe.

  Please, I beg you, help me please I need this computer for my work and am already 1 day behind by logging into my company to do my job (I have Windows XP Version 2002 service pack 2)

  Not only can't update windows via the update enter but an error message continues to appear every minute that used to go.

  It says "wuauclt.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  If I click on th does not send or send error report this message keeps popping up. When I click the to see what data link, he said:

  "Error signature szAppName: wuauclt.exe szAppVer: 7.4.7600.226 szModName: szModVer esent.dll: 5.12600.2180 offset: 005d 424 '  Details of the declaration: this error report includes: observation information covers the status of wuauclt.exe when the problem occurred, the operating system version and used hardware and Protocol address Internet (IP) of your computer. etc, etc, etc.

  When I click on info tech I get

  Content error report the following files should be included in this error report: C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\wuauclt.exe.mdmp C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\appcompat.txt WER189a the number changes each time.

  So far, I ran McAfee, Microsoft Security Essentials and it keeps popping up. I still do not know what updates I need through the Update Center but could manually go and get service pack 3 by itself. I need to be able to use the center of update and do not have this message continues to flow upward.

  What I do?   Thank you so much Corina

  Hello

   

   

  Let us make the below listed methods and check if we still get the error message.

   

  Method 1.

  I would ask you to reset the Windows UPdate components and check if you still get this error message.

  Click the Fix It button in the article below to do it automatically or you can do it manually as wel. For more information, refer to the article below.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

   

   

  Method 2.
  If the error still persists please provide us with the error log:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

   

  Method 3.

  I would also recommend to install the Windows Update Agent to manage the updates on your computer.

  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Please let us know if this helps you resolve the problem or if assistance is needed.

  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't install a webdisk on vista home 32-bit top of the system. I allowed the site through the firewall with ports 2077 and 2078.

  I have a website www.rsdworld.com. I tried to establish a webdisk or connecton on the network's website. I get an error asking that I ensure ports are allowed through the firewall or the folder cannot be created. This becomes agrivating. I had no problem installing a webdisk on my XP.

  Hello canmandom,

  You will need to check with Webdisk to see if it is compatible with Windows Vista.
  Check the system requirements.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Just updated through the creative application of cloud and now lightroom will not load again.

  As the title suggests:

  I've just updated creative cloud app, run lightroom from the standard m desktop shortcut and got 5.7. You who quit and tried to run the shortcut again. No charge.

  Thought it might do with still some 5.7 installed, uninstalled as well as through cloud creative app and it still don't load. Noticed that the creative application cloud still showed as being installed lightroom (5.7 has disappeared the first uninstall). Choose uninstall again and this time she went from the installation of the application to be an option to install section.

  Installed new version and it will not load.

  Could someone please advise how to solve this problem I would like to be able to access my files and the changes that I made.

  Thanks in advance,
  Matt

  Moderator:

  Note please. The solution posted to sign and to the creative cloud app seems to have worked

  I saw that before writing this post.

• can someone walk me through the installation of windows 98 and then upgrade (SE) then the upgrade xp off that?

  any help would be appreciated - we could even make it through the registration form if it would make it easier

  You don't need to install 98 98SE then XP!  Just start with XP and when he wants to for validation qualification just previous OS Exchange temporarily the XP for the 98 or 98SE CD-ROM and then swap back the XP disc to continue.  You can also do the same thing with the ISO Images as well.

• Is the content (stock) even through the line/self-paced courses and guided by an instructor/classroom in line/instructor?

  My apologies if this isn't the appropriate forum.

  My question is mainly about the LabVIEW Core 1 - Core 3 and TestStand 1 classes.

  Stock content is the same in the 3 aforementioned formats?  In stock, I mean 'to the exclusion of any other document submitted in response to a question from a student".

  Thank you.

  The content must be identical.

  The only exceptions I've seen is with some demonstrations or exercises that can be done without physical access to the system.

  For example in real-time online class you may not personally connect the material at room temperature, so instead you can see the hardware already set up and interact with it.

  Instructors often add a bit of their personal experience to classes and can explain the different sections differently.

• Table 2D with the ones and zeros

  Hello

  I want to use a MATLAB code in Labview, but without the help of MATLAB.

  The code is the following:

  Mask = ones (size (cc));
  Mask (1:sze, = 0;)
  Mask(:,1:Sze) = 0;
  Mask (end - sze, + 1:end, = 0;)
  Mask(:,end-Sze+1:end) = 0;

  It must be a picture 2D with joints and boarders with zeros. The width of the boarders are sze and the 2D array has size of cc.

  I can create a matrix of zeros, but that's all.

  Someone at - it an idea how to carry it out without assistance for loops?

  Thank you...

  gruenschnabel wrote:

  It must be a picture 2D with joints and boarders with zeros. The width of the boarders are sze and the 2D array has size of cc.

  I can create a matrix of zeros, but that's all.

  Here's what I'd do:

  

  (Attached is a version of LabVIEW 8.2 of the code)

  gruenschnabel wrote:

  Someone at - it an idea how to carry it out without assistance for loops?

  What is the problem with loops? Why this arbitrary restriction?

  (Unless you're on FPGA, things need to loop almost anything, even it is hidden inside functions).

  (See also this discussion)

• Position of the element in the array of Boolean

  Hello
  
  I have an array of Boolean, whose elements are initialized to false. For example,.
  

  private boolean array[] = new boolean[10];

  Subsequently, I put an element of the array to true. Let's say that
  

  array[5] = true;

  My question is how can I get the position of the whole of the element whose: value (s) was/is real? Is there a method that does this? I looked in the class of paintings, but could not find anything.
  
  Thanks in advance.

  There is no built-in function. Just write the code yourself, it is not difficult. Simply iterate on the table and when you find a true value, you have found your index.

• Doubling of the size of the array of Boolean 2D

  Hello.

  I have an array of Boolean 2D 20 x 20 and you need to convert that into a Boolean 2D table 40 x 40. If the first element of the array 20 x 20 is a 1, the first two elements of the first and the second line of the table 40 x 40 must be a 1 as well.

  Thanks in advance!

  Or similar to the other thread:

  I made it smaller, but the code remains the same...

  

• Setting the Dimensions through the planning of Performance parameters and error

  On 9.3.1 planning and doing a clean-up of legacy applications. Dimensional parameters of Performance tab when trying to move a Member more or less beyond the dimension 'Years' I get the error:
  
  An error occurred while processing this page. See the log for more details
  
  OK this error log? I went through all and see exactly the problem
  
  JTS

  Hello

  That means that when you clicked on the button migration in your 9.3.1 it do not update the repository planning app.
  I would of thought, it would errrored out when you tried to migrate.

  In any case you have two options, try, and try the migration again.

  Or run sql commands that are stored on the planning server, if you look in \Hyperion\Planning\config\sql
  you will see a lot of .sql files.

  Essentially when the migration is performed according to the version that you are migrating from it will run these scripts.

  Depending on your type of db for example Oracle, SQL Server defines which sql scripts, you must run against your planning application.

  If Oracle is your db, you run.
  4_1_1Migration_Oracle.SQL
  9_3_0Migration_Oracle.SQL
  9_3_1Migration_Oracle.SQL

  Stop planning before you run the scripts if you go this route.

  I hope that I have will have finally got this question correct :)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Values in the array of Booleans to dictate the output to be Boolean False or Boolean True

  I have a pretty simple question that I have a problem to solve.

  I'm looking to enter a Boolean array for a sub - vi that will take this table and dictate a single boolean output Boolean false or Boolean True.

  For example, the table will be table boolean 1 d, with a depth of 2 index values.

  -If the two index values are wrong then the sub - vi will kick for a False value.

  -If the two index values are true then the sub - vi will kick on a True value.

  -If an index value is True then the sub - vi will kick a True value.

  Any ideas?

  Thank you.

  jonathanupr wrote:

  -If the two index values are wrong then the sub - vi will kick for a False value.

  -If the two index values are true then the sub - vi will kick on a True value.

  -If an index value is True then the sub - vi will kick a True value.

  It sounds like an RC for me

  jonathanupr wrote:

  For example, the table will be table boolean 1 d, with a depth of 2 index values.

  I don't know what you mean by that.  How you choose to use indexes?

  EDIT: Perhaps you need some Elements of array or

• can an account be improved in two individual applications to the full program cloud halfway through the initial agreement of one year?

  I'm new on using creative cloud.

  I am sure that I need to use Photoshop.

  I think I can be more effective if I start with a little more programs (Premiere Pro, Acrobat Pro XI, hearing, Fireworks) creative cloud.

  I want to start with Photoshop, but I also want to know if there is a way to upgrade to the "Full" package, should I find myself with three or more unique apps.

  Please let me know.

  Thank you.

  Single update for all http://forums.adobe.com/thread/1235382 clouds can help

• I looked through the video tutorials for CS6 and can't find any help for PHP using SQL.

  Where is a good place I can go to learn more about the use of different languages as html and dreamweaver.  Is there a service that adobe offers that I could buy that would take me from recruit all the way to professional with a good structure, easy to use, such as adobe tv but more advanced and deeper?  I am building a Web site with a log in page and check.  I have the HTML part down pretty well, but need help to write php scripts and the use of SQL for storing user information

  I moved this to the main Dreamweaver support forum.

  In response to your question, you should be aware that PHP in CS6 Dreamweaver server behaviors use original MySQL functions that are should be removed from a future release of PHP. Server behaviors have been deleted from the CC of Dreamweaver. If you plan to create a website using PHP and MySQL, do not rely on Dreamweaver server behaviors. You must instead use MySQLi (improved MySQL) or PDO (PHP Data Objects) .

  If you are looking for video tutorials, you might be interested in the class I created for lynda.com. As a beginner, a good starting point would be Introducing PHP or PHP for Web designers (there are several videos of the sample that you can watch for free on my site). Both courses have been recorded on Dreamweaver (PHP for Dreamweaver CS6 Web designers), presenting the PHP on Dreamweaver CS5.5. PHP for Web designers shows how to connect to MySQL with MySQLi. You need a subscription to lynda.com to watch full courses, but you can get a free seven day trial by following the links on my site.

  If you don't want to commit to a subscription service, I also wrote a book called PHP Solutions, which covers MySQLi and PDO in depth. It also shows how to build a login system. At the moment, the second edition is available, but a third revised edition is due to the on sale in December.

  There are also a lot of free resources on the web you can find. The important thing to beware of is that a lot of old documents is based on the original functions of MySQL. Regardless of the resource you use, make sure it shows how to use MySQLi or PDO.