DefaultGateway value disappears completely from the registry after the computer restarts

Similar Questions

• CD drive disappeared completely from the computer!

  My CD/DVD drive has disappeared from my computer. I looked in the peripheral and nothing found, managed computer Manager and got nothing, used Microsoft Fixit and got no where and I entered in the registry to try to remove the filters of upper/lower case, but I don't see them where. It worked one day and then the other, he does not. I don't know what to do! I have an Acer Aspire 5520 with an Optiarc drive.

  Hello

  -No restart - power for a few minutes, so there is a full hard reset.

  It's my generic convenience store - please start at the top here and jump down nothing even if
  you've done it before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• How to remove the phone (bluetooth device) completely from the computer

  Original Title - need help with Bluetooth on Windows 8 devices?

  I'm trying to remove my phone (Blackberry) to my Bluetooth devices, because it does not work properly (I want to remove the device and then try to connect to it). Removed completely from my phone, I am removing my PC.

  I thought that I removed in 8 gain settings menu (in pc settings > devices), and then tried to delete there from there, but when I tried to connect my phone after that, he always says to remove the device from the computer, and then try again.

  In addition, the folder bluetooth (empty) for the folder bluetooth of my phone won't disappear in my computer. The phone is not yet listed under devices and printers in Control Panel.

  How can I remove it completely?

  (the laptop is a Lenovo g580)

  Hello

  Thank you for keeping us posted.

  I need more information to understand the problem and help you with the best available resolution.

  The question is limited to the connection to a specific device?

  You can follow the steps and check if it helps resolve the issue, that the device could be hidden.

  a. press the Windows key + X.

  b. click on Device Manager.

  c. click view.

  d. click the hidden devices.

  e. look for the Bluetooth device.

  f. right click on the Bluetooth device , and then click Uninstall.

  If please get back to us and let us know if this helps.

• How to remove Adobe Acrobat XI completely from the computer

  I had / have Adobe Acrobat 9 Standard installed on my computer. We wanted to see what additional services were available through XI.  We downloaded the trial version and when we were convinced that us did not require in this edition, we have even removed via the control panel.  Now, PDF Creator does not work anymore and the addon tab appears only in WORD.  So, when we try to download/open PDF documents from the internet, we are unable to do so.  How can I remove XI completely from my computer in order to allow PDF Maker to work again.  The error I get is that the server is can not be loaded.

  Uninstall acrobat 9, and then run the cleaner Acrobat: http://labs.adobe.com/downloads/acrobatcleaner.html

  then reinstall acrobat 9.

• How to remove a program completely from the computer?

  Live OneCare program is NOT in 'Add/Remove' of the population

  You can try to use the trial version of this software.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Good luck.

• I deleted my phone after the backup of photos were also deleted from the computer and iCloud

  I have an iPhone 5 and after upgrading my phone and transfer pictures, my computer screen went to sleep while he was removing all transferred photos off my phone as I walked away. When I went back and opens the screen, deleting was stopped, and even if I tried to have the iPhoto to delete 517 photos that were transferred, it would not be. So, while my phone was still connected to the computer, I scored manually 88 photos on my phone, following on the computer, ensuring that each photo that I retreat the phone had been transferred to iPhoto. Then, I went in the "recently deleted" on my phone and deleted those as well, so they do not take place. When I got back to the computer for the next round, I realized every photo that I had just deleted my phone also disappeared from iPhoto! I even checked iCloud and they weren't there. How can I recover these 88 pictures I deleted from my phone and why the hell did remove it from the computer?

  Any help would be appreciated. Thank you!

  Note: My operating system is OS X El Capitan 10.11.3 / / iOS on my iphone version 9.2.1

  iPhoto or the new Photos application on your computer?

  Note that if you have settings > iCloud > iCloud library enabled in your phone and if you have the menu Apple > System Preferences > iCloud > Photos - Options > iCloud library enabled in your Mac, all the photos you delete phone, the Mac, or directly on iCloud will be removed from all 3 places. Intend to iCloud photo library must synchronize all your pictures on all your devices and iCloud. More information on iCloud Photo library FAQ - Apple Support

• Skype disappears after the computer restarts

  Hi all

  Since 3 days ago Skype disappears from my computer when I turned off my computer or when I turn it back on again. In any case, after every reboot I reinstall Skype, which works as normal until I shut the computer off again.

  I use Windows 8.

  I'm looking for a solution for this, but I couldn't find it.

  Thanks for the help. I uninstalled Skype before reinstalling and now it works fine. The only thing was, that the Skype icon disappeared again from the taskbar, but after I joined it there yet from the office he remained in place.

  See you soon!

• The windows of the bar of Windows are already a form of tabs, so I need them in Firefox. How can I turn off completely from the 23 of Firefox?

  RE: TABS ARE WINDOWS!
  The windows bar already functions as a tab bar. These tabs are called "windows". So, I find windows superfluous Firefox tab. How can I turn off completely from the 23 of Firefox? I don't need to what are essentially the bars of TWO Windows covering the entire width of the image of my screen! I already have a Windows bar at the bottom of my screen, and if I really wanted to, I could change ITS position towards the top of the screen, so that it would LOOK at the windows of Firefox tabs bar. Firefox TABS are, essentially, a SECOND bar Windows superfluous.

  Here are my reasons why I prefer to use Mozilla's Firefox, Microsoft Internet Explorer or Google Chrome. I love and admire Firefox intended to Mozilla on good security for Personas Firefox Add-on and for free use of Firefox in the Add on Ad-Block, which, as you know, has the merit of separate to reduce the size of the screen - the last is my reason for wanting to get rid of "windows" Firefox SUPERFLUOUS tabs bar. I'm terribly sick companies forcing bars (most representative of marketing campaigns, trying to sell me something) in my browser (and in my throat) whenever I download something. (In case you haven't guessed, I have deliberately talking about your bar of Firefox tabs as a '' windows' tabs Firefox bar', because the TABS are WINDOWS!)

  You can also have an addon to open new tabs in a new window.

  • https://addons.Mozilla.org/en-us/Firefox/addon/tab-to-window/?src=search

• When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Original title: race Roller Coaster Tycoon 3

  When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Hi Redbaron666,

  Have you checked if the game works the clean boot?

  I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

  Windows 7 Compatibility Center

  Method 1: You can run the game in compatibility mode and then check

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What to do if symantec antivirus is not removed completely from the pc

  I have a symantec antivirus. what I try my best to remove pc., with all the usual ways. but I can't seem to do. what I do more than symantec antivirus remove it completely from the system.

  Hello

  Download and run the Norton removal tool.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=kb20080710133834EN_EndUserProfile_en_us&product=home&PVID=f-home&version=1&LG=en&CT=us

  See you soon.

• Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  Hello

  See how you go with this great piece of software.

  http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

  Concerning

  GT4U

• OfficeJet 5740: Cannot fax from the computer

  My new Officejet 5740, purchased on 11/15/14, worked fine until February 2015 - no problem with any of its functions, including faxes.

  That was all the time I went from a wireless connection to a USB connection and since then out of faxes cannot be sent from the computer, even if they can be sent from the printer by using the LED screen. There is no problem with the incoming faxes.

  Sending the printer with the LED screen is a nuisance of errors compared to the convenience of use of the computer. Lengthy discussions with HP Technical Support have been of any help. The technicians seem to think I should just give up and use the LED screen on the printer.

  After trying in vain to send an outgoing fax using the computer, the Fax status window appears saying "queue... "as the status of the fax, and it never goes one further.

  Is it possible that my passage in wireless USB connection type caused the problem? Maybe I need a different driver? If Yes, where can I download one, and what should I go for? Thank you.

  Hello @Harry46,

  Welcome to the Forums of HP Support! I see that you are not able to send a fax from your HP Officejet 5740 computer, you can send a fax from the front panel.

  I think you just need to update the drivers and software, please proceed with the following steps:

  1. disconnect the USB key if you use a direct connection.

  2. remove the HP software JO 5740 uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software JO 5740 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your JO 5740 (DO NOT connect USB until the software prompts you to):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-134701-2&cc=us&DLC=en&LC=en&OS=4063&productOid=6617254&sw_lang=&product=6617256

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if this succeeds, can now send you a fax from the computer? I'll watch for your reply.

  Thank you

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot control printer HP 6510 directly from the computer

  I use the HP - 6510 B222a printer and used to be able to control all functions directly from the computer.  All options would appear in a window allowing me to select an assignment (printing, scanning, etc.).  All of a sudden, this option disappeared and now I can only control functions of the printer from the small screen on the printer itself.  Can someone help me with this problem?  I wish I could go back to control everything directly from the computer.  In addition, there is no way to determine the levels of ink on the computer screen.  Thanks for your help.

  Hello

  Reinstall the full feature software and driver on your computer can help. You can download from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&DLC=en&product=5058336

  (Note: B222a and B221a use the same driver).

  Kind regards.