NULL.sys fails to start, error code 24

Similar Questions

• Windows 7 fails to start - error code 0 x 490

  Hey guys Windows,.

  Last night, I started my system without any problem at all.  Went to sites, I have been repeatedly - facebook, tribal wars, nba. Went through a normal life, stops the process and went to bed.

  This morning, I booted up and found my computer restart and going through the functions of startup repair.  I got an error code of 0 x 490 and that the process has failed to fix the problem.  I then looked atthis and tried... failed.  I tried to boot into the last good known... configuration failed.  I tried to boot into SafeMode... failure on avgidshe.sys.  Now I remember seeing something about an AVG service manages not recently but I don't know if this file is the one in question.

  Someone at - it ideas?  I am at a standstill right now and don't know where to go.

  Kevin

  Other news - startup repair problem

  • Name of the event: StartupRepairOffline
  • SIG 01: 6.1.7600.16385
  • SIG 02: 6.1.7600.16385
  • SIG 03: unknown
  • GIS 04:21200839
  • SIG 05: AutoFailover
  • SIG 06:5
  • GIS 07: NoRootCause
  • The system version: 6.1.7600.2.0.0.256.1

  I suggest a custom installation and retrieve your personal files and settings by using Windows.old

  How to recover Documents, music, and e-mail after the upgrade

  Demarrer start from your Windows 7 DVD, and then select the custom installation option.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• OPatch failed with the error code 72

  Hello
  
  I try to apply the patches to the database, whenever I try to use opatch I get error below.
  ----------------------------------------------------------------------------------------------------------------------------------
  
  [oragold@apps OPatch] $ opatch lsinventory
  Citing O Patch 10.2 .0.2.0
  
  Interim fix installer Oracle version 10.2.0.2.0
  Copyright (c) 2005, Oracle Corporation. All rights reserved...
  
  
  Oracle home: /u02/oracle/PROD/db/tech_st/10.2.0
  Inventory Center: / home/oragold/oraInventory
  from: /etc/oraInst.loc
  OPatch version: 10.2.0.2.0
  YES version: 10.2.0.2.0
  YES location: /u02/oracle/PROD/db/tech_st/10.2.0/oui
  Location of the log file: /u02/oracle/PROD/db/tech_st/10.2.0/cfgtoollogs/opatch/opatch-2009_Mar_30_16-28-49-EST_Mon.log
  
  List of houses on this system:
  
  Name of the House = OraDb10g_home1, rental = "/ u02/oracle/PROD/db/tech_st/10.2.0/db/inventory/prereqs".
  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.
  Possible causes are:
  Oracle Home Dir. path does not exist in the Central stock
  Oracle Home is a symbolic link
  The Oracle Home inventory is corrupted
  Failure of the LsInventory Session: OracleHomeInventory::load() gets oracleHomeInfo null
  
  OPatch failed with the error code 72

  Hello

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home
  The Oracle Home inventory is corrupted

  Please, check the following:

  (1) you have the last installed opatch
  (2) orainst.loc exists and it is not corrupted
  (3) inventory_loc in orainst.loc points to the good oraInventory
  (4) oraInventory exists and it is not corrupted
  (5) the local inventory exists and it is not corrupted

  If missing oraInventory, restore it from a backup, or please refer to recreate.

  Note: 274526.1 - how to download and install opatch (generic platform).
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=274526.1

  Note: 295185.1 - how to recreate the Global oraInventory
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=295185.1

  Note: 360079.1 - Global inventory and Local explained
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=360079.1

  Note: 754667.1 - "Opatch Failed With Error Code 73' /var/opt/oracle/oraInst.loc pointing oraInventory bad location
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=754667.1

  Kind regards
  Hussein

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Windows Vista Service Pack 2 (KB948465) will fail with the error code 800F081F

  Hello

  I tried to install windows service pack 2 for vista via windows update, but it fails everytime with error code: 800F081F. I tried to run Microsoft FixIt and systsme even update the tool but no luck. even the system tool update crashes while ' installation of hotfix for Windows (KB947821) (update 1 of 1)...» ". No online solution proved to be correct in my case. Help, please.
  Thank you

  Hello

  System update readiness tool will take some time, so I suggest you wait a while until the process is completed.

  You can find newspapers by accessing this folder.

  c:\Windows\logs\cbs\checksur.log

  I would suggest trying the following steps and check.

  Method 1:

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Methods 1 and 2 require changes in the registry to do. Make sure that you back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997#appliesTo

  Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these areas could be lost in the process. It is also possible for the computer to enter in a start State no.

  Proceed at your own risk.

  In addition, see the reference article-

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Answer if you need more information on this, and we will be happy to help you.

• Vista: The device can not start (error Code 10) for a USB CDC device which works fine in XP

  I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista.  The device uses the usbser.sys driver and emulation of the virtual Comm Port.

  The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes.  Shows Device Manager: device can not start (error Code 10).

  Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC.  With Xp, it all works very well on more than one PC, with Vista, there are questions.  I use the INF manufacturer provided for Vista, still no results.

  Any ideas on this would be greatly appreciated.

  Hi NuWaveDC,

  Thank you for taking the time to post on the Microsoft answers Forums.

  Please see the following article for an explanation of this error code 10.

  Explanation of error codes generated by Device Manager

  http://support.Microsoft.com/kb/310123

  Follow the steps listed for the error Code 10 see if this helps solve your problem or not.

  Please post back to let us know if this information was useful or not, so that we can help you if need be.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• OPatch failed with the error code 73

  Hi all
  
  I apply patches 10.2.0.3 on my family (10.2.0.2) group oracle, then I would apply patch 5752399 (force of e/s doesnot work for the UFS file system), but this fix I have error:
  
  Checking for update...
  OK stock check: Patch ID 5752399 is part of the Oracle Home inventory with appropriate meta-data.
  Archive failed: could not update "/ u0/app/oracle/product/10.2.0/lib/libgeneric10.a" with update "/ 0/5752399/files/lib/libgeneric10.a/skgfr.o".
  Archive failed: could not update "/ u0/app/oracle/product/10.2.0/lib/libgeneric10.a" with update "/ 0/5752399/files/lib/libgeneric10.a/skgfr.o".
  
  ApplySession failed: ApplySession failed in the phase change of the system... "The hotfix checking failed: null'."
  OPatch will try to restore the system...
  Restoration of the House of the Oracle...
  Check if OPatch must call 'make' restore some binaries...
  OPatch was able to restore your system. Look at file log and time stamp of each file to make sure that your system is in the State before applying the patch.
  
  OPatch failed with the error code 73
  
  
  Can someone help me?

  PL see MOS Doc 406472.1 (mandatory 5752399 Patch to 10.2.0.3 on Solaris 64-bit and filesystems managed by Veritas or Solstice Disk Suite software) can help - there are a few notes on this specific issue

  HTH
  Srini

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Download works 9 KB2092914 security update and it fails with the error code 646

  Update of security for Works 9, KB2092914, downlaod fails with the error code 646

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.

• Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643

  Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643 for several occations and continue to offer. Several attempts to install manually also failed. Help is very appreciated. Thanks: SEBUBE

  Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643 for several occations and continue to offer. Several attempts to install manually also failed. Help is very appreciated. Thanks: SEBUBE

  Try each of the methods of repair HERE. If none of these solves the problem, we'll go from there.

• kb2686509 updated Microsoft fails with the error code Ox8007FOF4

  original title: microsoft updates fails with the error code Ox8007FOF4

  My automatic microsoft update fails, I tried the manul update that also fails, I get an answer of (kb2686509) and an Ox8007FOF4 error code is their someone out there with an awnser

  http://support.Microsoft.com/kb/958051

• Windows live gallery encountered an error loading WLXPhotoViewer.dll and cannot start error code: 0 x 80070035

  Whenever I try to open a picture/photo, I get this message "Windows liver Gallery encountered an error loading WLXPhotoViewer.dll and cannot start error code: 0 x 80070035. Around her, the only is to save the file, then open it with another program. I'm frustrated because this is a nuisance and time-consuming. Any suggestions please?

  Maybe the exclusive database is corrupted.

  Read the following article.

  (944221) freezes Windows Live Photo Gallery
  or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can be
  Pictures.PD4, Pictures.pd5 or Pictures.pd6)

  Rename the Pictures.OLD file will force Live Photo
  Gallery to create a new database on the next launch file.

  Know that the gallery will be as it was the first time that you
  open and some metadata and labels may be lost.

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• Backup fails with the error code 0 x 810000005

  Original title: error codes 810000005

  Backup fails with the error code 0 x 810000005

  Hi ElaineKingsley,

  ·         What is the exact error code is 0 x 810000005 or 0 x 81000005?

  ·         To the place where you are performing the backup?

  ·         Not him enough not space is available to perform the backup?

  I suggest you do the check disk (chkdsk) to the backup location.

  Check the hard disk for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors. I suggest you Save the data because data may be lost in repairing this sector.

  If the error code is 0 x 81000005 see link for resolution below:

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Hope this information helps.