num lock 17 t-J100

Similar Questions

• Re: Satellite P300-276: on the right side of the keyboard keys become numbers when NUM LOCK

  When I commit to NUM LOCK keys on the right the number keys on the main keyboard also become as well as on the numeric keypad on the right.
  I tried pressing Fn and NUM LOCK at the same time as on a not extended keyboard, but that makes no difference.

  I also tried different input languages and keyboard styles.
  I can't test with an external keyboard, because I do not have. I downgraded from vista to XP.
  I don't know if this makes a difference because I did not notice this after the downgrade.

  Any ideas?

  Hello

  Sorry, but I think I put t understand your question
  Made, it is whether the digital LOCKING is enabled (FN + F11) and buttons; U, I, O, J, K, L and M becomes to numbers:
  you 4
  I have 5
  O to 6
  J 1
  K to 2
  L 3
  M 0

  If you press FN + F11 again then the buttons must be on back letters...

• Satellite L50t-A-145 - Num Lock ON by default on Boot Up

  Hello

  I was wondering if anyone here has been able to set a L50t-A-145 running Win 8.1 to start with NumLock on the default start state.

  I tried looking at the BIOS settings, where I always put before on other computers, but could not find the option here.

  Thank you very much

  Iain

  To be honest I don t understand what you try to do
  The Num Lock isn't associated with all the BIOS settings.
  The Num Lock key is on the right in 10-digit keypad and press on this button will allow to disable NumLock

• Satellite L555 - Win10 no NUM-Lock at startup - BIOS / REGEDIT won't work

  I tried to activate the NUM-Lock-block on Windows-Login as well as BIOS

  I installed Win10

  I also tried to find an option in the BIOS, but it is not an Option...
  I tried to turn on Regedit as Forum-Discussions said...:
  Current... USERS/ControlPanel...etc: Keyboard: 2 (already written, will not work)
  HKEY_USERS\Control Panel\Keyboard
  Initial keyboard
  2147483648 change to the top + 2: 2147483650-> This will not be accepted by regedit - Error Message

  Ok I found my problem.

  It wasn't the Admin user.
  I started REGEDIT as an ADMINISTRATOR, to make it work now

  SOLVED

• Want to m6 - on keyboard num lock button

  M6 - envy I can't tell when the num lock key is on when I use the keyboard on the right side. This creates a problem when you type the number of password and I need to stop and remember to use the keys on the top. How will I know if it's on or not? Nothing (no lights on the cover lock) lights up. Nothing in the taskbar or the other.

  Thank you

  Hello Cageycat,

  You have a problem don't know not if your key for the nun is activated.

  Go to HP.com and update the keyboard driver when it exists and also in the BIOS.

  Here is a link to updates. You will need your product number.

  You can also go to ease of access and change the settings of toggle keys.

  • Go to start of easy access type and press on enter
  
  
  • Scroll and click on create the keyboard easier to use
  
  
  • Check the turn ToggleKeys on.

  This will give you a sound when the keys are on.

  I would like to know how everything goes.

• Satellite P300 - strange problem with num lock keys

  I had a problem with my keyboard lock num. I have a P300D - 131

  By pressing '4' and '8' at the same time, it shows on the screen '4 '.

  By pressing "0" and "6" at the time, tamed, it shows on the screen "0 0".

  This also happens if I touch the very fast numbers. That's why you can't count on the num lock keys! I have this problem since I bought the laptop in July 2008. Now, I found this forum and I hope that really that someone can help me solve this issue!

  Thank you
  HDW

  Hello

  These issues in the past have been resolved with BIOS update. I therefore recommend as a first step of the BIOS update.
  Check the current version on your laptop and the most recent proposed on the Toshiba download page.

  To be honest I don't understand why you waited so long on this subject. Laptop warranty valid and the nearest Toshiba authorized maintainer can help you about this.

• CAPS & NUM LOCK lights don't light up - found the Cause of this problem. 16/02/2013

  HP dear Forum,

  After 15 months of this issue where my CAPS and NUM LOCK lights on my HP-G72t-b00-cto notebook PC will not turn on, I finally found the cause of this problem. 16/02/2013

  Hello paulwayne317,

  You shouldn't need to disable the power management software, but simply adjust to where it is not longer Hibernate.  Take a look at this document, which should help.

  Please let me know if it works.

  Good luck!

• Satellite P500 (PSPE8A-01R002) - number pad and num lock does not

  Number pad and num lock on my P500 PSPE8A-01R002 does not work after the upgrade to Windows 7.

  Any help will be appreciated.

  Hi AndrewF,

  Have you noticed the same problem on a preinstalled OS from Toshiba?
  As far as I know Satellite P500 are always delivered with Windows 7 OS provided with your P500?

  Anyway, in your case I would try updating the BIOS. You can get the latest version on the Toshiba site.

• HP g7-1320dx - on the numeric keypad does not work and the Num Lock will beep when you press

  Today, I noticed that my keypad does not work. The keys / *-+ and 'Enter' works, but the actual number will not.

  When I press NUM LOCK, it only beeps and turns the light active or not. And the keys / *-+ and 'Enter' won't work, any more than the actual digital keys.

  The regular keyboard numbers and keys all work, it is a simple matter of numeric keypad.

  Any ideas?

  So I thought that my own problem.

  "I went to the "Ease of access" >"mouse settings"> "paved digital use to move the mouse on the screen" and it has disabled."

  I hope it helps someone else in the future!

• HP Envy TS: Num Lock key

  Num lock key will not work. It sounds right, alternating up and down. Numbers on the numeric keypad do not work

  Maybe some sort of sticky key?

  I did a hard reset - did not work.

  Uninstalled and reinstalled the keyboard driver - did not work.

  Help, please!

  Hello @RBones2016,

  Welcome to the HP Forums!

  I read your message and understand key NumLock does not work on your laptop, HP Envy. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in this document:

  HP - computer keyboard laptops laptop troubleshooting (Windows, 10, 8)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of windows. For more information please provide your product model using the link 'find my product'.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• HP TouchSmart ENVY 15-j100ee - Num lock will beep

  After the update of my TouchSmart from HP ENVY 15-j100ee of windows 8 for windows 8.1 and installed all the drivers (thehttp://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=6796372&lc=en&cc=emea_middle_east&dlc=en... num lock button has a beep and 1-9 buttons does not work. However, when I am clicking on 9 (previous page) page moves upward. Is not because of buttons have the problem, it's a hardware problem.

  Support HP can you help me?

  I have re-insallted windows 8.1 and now everything works fine.

• Connection num lock problem

  Here's my problem:

  I am running Windows XP on triple boot with Ubuntu and Backtrack. Caps lock Num Windows turns on whenever I start. Lock num on my computer is physically damaged (even if this is not the reason why turn on num lock), which means that I can not connect.

  I use Ubuntu right now. Since Ubuntu has the ability to open and modify Windows .exe, I open regedt32.exe and modified HKEY_CURRENT_USER\Control Panel\Keyboard "InitialKeyboardIndicators" = "1".
  I also modified HKEY_USERS, yet my registry did not have a "Control Panel" button, so I created myself: HKEY_USERS\. Default\Control Panel\Keyboard "InitialKeyboardIndicators" = "1".

  I also tried another method that was to create a file called "numlock.vbs" and write the following:

  Set WshShell = CreateObject ("WScript.Shell")
  WshShell.SendKeys "{NUMLOCK}".

  And paste the file in All Users\Menu Démarrer\Programmes\Démarrage. Nothing has worked so far.

  In accordance with the following article, the values only legal "InitialKeyboardIndicators" is 0 (off) or 2 (market).

  "How to activate the key NUMLOCK for logon screen?"
    <>http://support.Microsoft.com/kb/154529 >

  "NUMLOCK causes problems of connection with laptops.
    <>http://support.Microsoft.com/kb/170903 >

  HTH,
  JW

• Pavilion 17z-F200 CTO: How do I change turn on the num lock (NumLock) key have a State by default to it?

  How do I change turn the num lock (NumLock) key a Pavilion 17z-F200 CTO to have a State default one?

  System BIOS has no setting for it. By another post, I tried to set the value of register in HKEY_USERS\. Default\Control Panel\Keyboard for "InitialKeyboardIndicators" of "2147483648" to "2147483650. It seems not to change after a reboot.

  Yes, the BIOS settings was the first thing I checked. But BIOS seems to only contain States in order for the locks of keys on the new HP Pavilion or Envy laptop.

  I did more research and found more credible sources to TechNet asking to change the same registry value to 2. I tried it and it works a fact/do.

• Num-Lock is not on

  I had an old PC running Windows XP Professional, which was slow and doesn't work as well as it used to. One of my friends suggested I reinstall Windows on the PC and see if that accelerates it. So I got out the old disc that came with the computer and reinstalled XP inside. (Yes, I installed it correctly). After a few days of use, I noticed that there was a slight glitch. Num-lock was not on at startup! Usually, when I have on my PC, num-lock is enabled by default, but now, I have to manually on it whenever I start!

  Can someone tell me how to set num-lock to be on that by default?

  This article in the Microsoft Knowledge Base has the answer: How to set the State of Numlock on connection in Windows XP .

• USING ALT CODES ON A LAPTOP WITHOUT NUM LOCK

  LAPTOP HAS NO NUM LOCK INORDER TO USE ALT CODES. USING THE FUNCTION KEY WITH A NUMBER OF KEYS AND THE FUNCTION ALT DOES NOT WORK ON MY GATEWAY LAPTOP. IS THERE ANOTHER WAY TO ADD ACCENTS OF SPANISH WORDS?

  Hi Stephen finkin,

  Almost all the words of the Spanish accent require the combination of keys or the keys ALT.

  However since your laptop doesn't have this option, you can use the character map.
  You can use character map to insert special characters into your documents. Special characters are characters that can't be found on your keyboard. These characters include advanced mathematical operators, scientific notation, currency symbols, and characters from other languages.

  Special characters are characters that can't be found on your keyboard. These can include symbols, mathematics and special characters characters of other languages. You can insert special characters into your documents using the character map.

  1. open the card of characters by clicking on the Start button, all programs, Accessories, clicking System Tools, and then click character map.
  2. in the list font , type or select the font you want to use.
  3. click on the special character to insert into the document.
  4. click Selectand then click copy.
  5. open your document and position the cursor where you want the special character to appear.
  6. on the Edit menu, click Paste.

  Insert a special character into a document (ASCII codes)
  http://Windows.Microsoft.com/en-us/Windows-Vista/insert-a-special-character-into-a-document-ASCII-codes
  Using special characters (character map): frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-special-characters-character-map-frequently-asked-questions

  Also see the Microsoft KB article below.
  How to use the United International keyboard layout in Windows 7, Windows Vista and Windows XP
  http://support.Microsoft.com/kb/306560

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.