Satellite P300 - strange problem with num lock keys

Similar Questions

• Satellite L850 - 1 H 4 - a strange problem with the FN key

  Hello

  I have a strange problem on my laptop. When I uninstall my PVAT my start "FN" key works, when I install it it s not working not properly. Its market not only the volume key (F9 and F10) without pressing the "Fn", if I want to press F9 or F10 I have to press FN + F9, even with the rest of the buttons.

  When I install PVAT I have to press FN, so I can use my F keys (e.g. F3 to search on the browser tool, alt + f4 - I have to press Fn + alt + f4), and I can't use real functions like mute, disable Touchpad etc. Use the volume keys only. Y at - it a problem if I run my computer without PVAT, this may affect its performance?

  Where could be the problem and can I fix it? I'm with Windows7 x 64, but the laptop was with no OS when I bought it. And there is a problem with this version, I bought its impossible to install the Pakc3 Service, it s with SP1, can be the problem? I put t know what to do... perhaps I run the laptop without PVAT, sounds good, because the buttons work fine without it, but I don't know if it interacts with something else.

  Thanks in advance!

  Its possible to use the function buttons by pressing another button without the use of the fn or FN.
  This option can be changed in the BIOS.

  Go to the BIOS by pressing F2.
  In the BIOS, choose Advanced-> system configuration Options
  Here you should find the option that allows to change the special function keys which allows you to use the function FN or without button Fn button

  By the way: this theme has already spoken here in the forum several times. therefore recommend that you use the advanced search to Forums before posting new thread

• Satellite A350 - strange problem with hitatchi HTS ATA 320 GB HARD DRIVE

  Recently bought a Toshiba Satellite A350 - still under warranty.

  My problem started with gel/delay of Windows whenever I transferred specific files.
  I found that a lot of my files are the same; It's then that I transfer or open these files - this can take 10 minutes to load crash, then displays a corruption error
  During this phase:
  The hard drive makes a slow repetitive scratching sound
  The laptop hangs for an average of 10 minutes before returning to a usable state - I found more than 15 files and suspect many more that are corrupt.
  I suspect a faulty hard drive, like the check disk crashes and my system hangs whenever I open / transfer of these files.

  I tried to reformat and install the new OS, but always check disk crashes and I lost a lot of important files, because they became unusable.

  Is there something I can do to remedy this
  or
  If the hard disk is defective, Toshiba will replace?

  BTW - I m in Australia.

  Hello

  Exciting announcement, but it will be interesting to know how exactly you do and what kind of data are responsible for this. I want to say I use laptop computers and can not say that some of the data makes my crazy HDD.

  If you really think that there is a problem with the disk HARD nearest Toshiba authorized service provider contact. They will check the functionality of the HARD drive, and if there is a serious hardware problem, you will get a new. Of course for free.

• Satellite P300-156 - problem with drivers ATI 3470

  I have download the new catalyst 9.3, I exceeded the drivers with mobility modder, but always after the installation, the pilots see 3470 drivers only 3450.
  What is happening and why Toshiba is not updating the drivers for Satellite P300 on the site?

  Hello!

  The reason is the reason for which you are trying to use a driver that is designed for desktop graphics cards and not for laptops.
  It s on your own risk to use these drivers because they don t have a protection against overheating.

  In your case I remove and install the most recent that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite P200-10s - problem with the Tilde key

  Hello

  I recently bought my laptop and installed a game (Oblivion) and in this game, we can call the console of the game but I can't call because the key does not work. The Tilde key about 1. I have been googling and noticed that a lot of people with windows vista on laptops have this problem... can someone help me?
  Is it possible that key hangs on the mode full screen?
  (Sorry my English)

  Thanks in advance,
  Francisco

  Hello Francisco

  This game is not known to me, but it will be interesting to know if this game is designed for Windows XP Home edition or Vista operating system. In any case if the same question is noticed by many other users of laptop I don't see any solution here. It seems that the problem is not caused by laptop faulty or something similar. If your laptop works well, you game homepage and see if there is a solution.

  Manufacturers of laptops have noting to do with it.

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Satellite P300-150 - problems with HDMI output

  I recently reformatted my hard drive due to a nasty virus. I now put my old favourate XP Pro with service pack 3. Never had very well with Vista.
  I managed to find almost all the drivers, I think I need, but the HDMI does not work and I can't seem to find the HDMI for XP/Vista Manager only. XP is too old to support HDMI?

  Is their a fix or a piece of software that will lead the material in an XP environment?

  Hi markjj,

  Normally you n t need a special driver for the HDMI connection. It is only important to install the driver from Toshiba Web site viewing. After that, you can use the HDMI connection and switch between monitors when you press FN + F5. It s the same procedure as in Vista or other operating systems.

  So have you ever tried on XP HDMI connection?

  Test and give us some information. If it doesn't we can try to solve this problem. :)

• Satellite A305 - strange problem with power LED

  I have the Toshiba Satellite A305-S6825 and I noticed that when I run the laptop on electric power, the battery light (LED) on the front of the laptop is "illuminated".

  AC power ligtht is the first light on the left; and law who is the witness bright power switch; and in which law is the "LIGHT of the BATTERY. It is the light, I want to talk to.
  I can understand why the light can be WE when I was using the laptop with only the (power) battery in operation. But why the battery led (lit) when I have the laptop plugged into an electrical outlet?

  Is this normal?

  When I turn on the computer, after it's off for a while, and it is plugged into an electrical outlet, I see that battery light is kind of purple color, until the battery reaches 100% charge and then it becomes white.

  When I put the cursor on the bottom right of the screen battery icon, it reads (after full load): full load 100% current power Plan - balanced.

  Hello

  > I have the Toshiba Satellite A305-S6825 and I noticed that when I run the laptop on electric power, the battery light (LED) on the front of the laptop is "illuminated".

  This is nothing unusual. I have another set of Satellite and my battery LED light if the laptop is connected to the power adapter too.
  It changes between the function light orange and blue if the battery is fully charged or not.

  It seems you ve not laptop wholesale experience here is the led and the LED are very effective and don t waste power as a common light bulb.

  So relax and enjoy you machine!

• Satellite L40 - strange problem with battery LED indicator

  Hello

  I have Satellite L40 - 18w and I have a problem. When the battery is low or that he is in charge of the led is orange, but when it is fully charged there is no led indicator. Even if I turn it on, there is no light and if I check the power connection options AC adapter is recognized. Operating system is Windows XP PRO SP2. I tried to find the Toshiba Power Saver, but it seems that he can't stand L40.

  Would it be a hardware or a software problem?
  Thank you in advance for your help!

  I had the same problem.
  Remove and install back the battery.

• Satellite L650 - strange problem with webcam

  Hey

  Can someone help me?

  I bought Toshiba laptop recently. He series Satellite L650 s but built in webcam it worked, so now it does not work, when I opened to take the shot, it's just to show image by default... led light is pn, but it is only to take capture an image by default, even when I am recording videos

  Help, please.

  Start application Web Camera and click the last effects of the option. Check the last tab and do not forget, that it is set to off.
  Check all the settings there. You will find the option where you can turn this option off.

• Satellite U300 - strange problem with volume control wheel

  I bought a U300 last week and I find that the volume control wheel doesn't move very easily. It seems that you have to push it slightly to adjust the volume, and when you release your finger, the volume goes in the direction you moved to slowly. Everyone knows this?

  In addition, when pressures above the express card slot the housing compresses. This happens on all the U300s?

  I would go back to the store I bought in and ask, but I live quite some distance from him so I thought I'd see if anyone here could help first. All responded very appreciated.

  Thank you.

  Hello

  Looks like the wheel is stuck and something around the wheel blocks the volume wheel. I think the best idea is to return the machine as you said, since it s very unusual described what you´ve.

  You can also send your machine to a service partner chartered for an assessment of health/repair of equipment.
  If you need help to find the one closest to your country, you can use the following link to find some:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck, welcome and good weekend

• Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  You say that when you press the NUM LOCK key, the Numlock State does not change (if enabled to disabled and vice versa)?  Have you tried to unplug the keyboard and by ensuring that the keyboard of the laptop does not have enabled Numlock?  If so, turn it off on the laptop keyboard and reinsert the another keyboard and see if the problem is resolved.

  If you do not need the Numlock key, it can be disabled at startup with the following procedure:http://www.technipages.com/enabledisable-numlock-at-login-or-startup.html. Once this is done, I don't think he's going to turn on or off and that they the keyboard will start in the off position.  You will not be able to use the key yourself or another, but maybe the problem she is on (which is worse than it to be impossible to be turned on) will be resolved and I hope it will be enough for you.

  If the key does not work and you want to be able to use it, the keyboard may be defective.  Try the keyboard on another computer and see if you have the same problem.  If so, the keyboard is defective and must be replaced.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite C850 - found problems with the networking and the FN key

  Hey everybody,

  I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.

  (1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.

  (2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.

  I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.

  Before you begin to discuss your problems can you please tell us what OS you are using?
  Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.

  1 / What do you mean with refusing? your WLAN is visible for your laptop?

  2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.

• HP Envy TS: Num Lock key

  Num lock key will not work. It sounds right, alternating up and down. Numbers on the numeric keypad do not work

  Maybe some sort of sticky key?

  I did a hard reset - did not work.

  Uninstalled and reinstalled the keyboard driver - did not work.

  Help, please!

  Hello @RBones2016,

  Welcome to the HP Forums!

  I read your message and understand key NumLock does not work on your laptop, HP Envy. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in this document:

  HP - computer keyboard laptops laptop troubleshooting (Windows, 10, 8)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of windows. For more information please provide your product model using the link 'find my product'.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• Caps lock and num lock keys lights don't light up

  Hello

  My caps lock and num lock keys lights don't light up when I turn the plugs or NumLock on, I recently contacted Microsoft Tech support, they told me to contact my HP manufacturing and it's a laptop, they did ' t really gives me a lot of support, so I'm here without you people asking how to solve this problem.

  Thank you
  Marco

  Hello Marco818,

  Thank you for your message.  Microsoft was right to put you in touch with the manufacturer of your.  The keyboard will fall under the material, so only they can fix or diagnose what the problem.  It could be something as simple as a bad supply or burnt cable bulb.  Anyway, that falls under HP support.

  See you soon