Number of function calls
Hello
Scout has been very useful to optimize my app, it is a great tool!
However, when you do the profiling of Actionscript, I couldn't find a way to display the number of times a function is called. It is important for me to make the difference between a function that takes too much time and a function that is called too many times.
Is there a way to view the number of calls that I missed? Is this something, you could add in an update for Scout? Or this information is available because you do statistical sampling?
Thank you!
You are right that we do not show you a function call counts, because we use statistical sampling. What you want to, should save us every single function call, and this would have a very high cost and provide incorrect synchronization data. The most important thing is to accurately measure the time to function, so you can optimize the right thing, we use sampling (you can learn more on this subject, here: http://www.adobe.com/devnet/scout/articles/accurate-profiling-with-scout.html).
If you really want to measure the number of times a specific function is called, you can use custom telemetry. Because it uses the instrumentation rather than sampling, it will record each function call. Caution - If you insert a quick feature which is really often called custom telemetry, overhead will be skewing the data that you see in Scouting (it will look like the function took a lot more time that was the case). So I would say that you run Scout normally (with no telemetry custom and no setting of "high-overhead" enabled), to determine what functions are taking the longest, then use custom telemetry to study how often these functions are called. You can find out how to use the custom here telemetry:
http://www.Adobe.com/devnet/Scout/articles/Adobe-Scout-custom-telemetry.html
You will see your instrumentation custom panels top activities and sequence of activity. If you right click on the table header in the Top activities Panel, you can enable the 'Number' column, which will show you what you want.
Another option, you can use it, the memory allocation tracking feature. Records all allowances, so it will give you an accurate count of the number of times where a function is called, as long as it allocates always something (it won't show you calls that perform no function allocation). Of course, timing won't be accurate with this market, because the load is high.
Tags: Adobe Animate
Similar Questions
-
How to use the node function call library for a function in the dll with the data SUB type
Hi all
I would ask for your kind help
I am facing a problem with the call library node.
I have a C++ (stdcall) function, which has Sub as data type
XXXX error code (hwnd, lid, getValue, * Sub data1, * Sub data2)
data1 and data2 types are constantly changing based on the value of 'getValue '.
Mainly I can use the call library node several times and adapt each node according to the types of data data1, data2 and extract the values and use in the code. Here is no question. Real question is:
My question:
How can I use a node of library time call and make a case according to the 'getvalue', who will control the data1, data2 data type. Here I really seeking solutions.
My tests:
I used varaints as entry to the libray call node of the data1, data2 and selected parameters in the call libraby node as "Adapt to type. Here labview just crashed.
I appreciate your suggestions to feedbackand.
Thank you
Karine
You must allocate enough space for data1 and data2, and then pass a pointer to this space. An easy way to do this is the function to initialize table. Set the U8 type and size for the number of bytes required. Pass this array to the function as a pointer of table data.
After the function call returns, you need to extract the data in the table. You can do it manually, but a simple approach is to use the array of bytes to a string. Then, in a housing structure, use Unflatten chain to convert the string to the correct data type. This method also converts the "endianness" which will be probably necessary; Be sure to only set all entries for unflatten correctly.
-
Reg: Count function call-
Hi Experts,
I am tracking my processing batch every night and find a particular function called many times.
Is it possible that I can find how many times it was performed in a given period of time?
AWR? Or, any dynamic view v$ _?
Please notify.
Thank you and best regards,
-Nordine
(on Oracle 10.2.0.4.0)
Asked me the same question to the company less than a month ago so I can shed some light on this particular situation (not too much).
Some (say seven) years ago our thinkers came up with the idea of VAE and apparently I was the only one who objected to the approach (https://www.simple-talk.com/opinion/opinion-pieces/bad-carma/ and articles in several Tom Kyte has had no effect he was only harmful for me - no promotion,...).
Therefore, the number of attributes is greatly increased and the situation becomes more and more unbearable.
As it is mandatory to call for attribute values, it is not just online treatment, plans sql also suffer (calling functions for each line) that the same functions are called from sql too.
Verification of AWR reports it turns out that some functions that provide attribute values are called more than a hundead million times a day, and as we call them around there is little use querrying dependencies without taking into account the volumes of data (if only someone knew how).
So something like WHO_CALLED_ME is required to identify the heaviest appellants and (much more than that), it is a problem of how silently (as much as possible) reduce the number of attributes where nobody is now willing to admit the decision was wrong or (not even in my dreams) that I was right.
As far as I KNOW two attributes have been removed these time and proclaimed a spectacular feat of tuning.
Chi lives, vedra that lets say our Italian neighbours.
Concerning
Etbin
-
Is there a function called startPropagation...
Hello
I have prevent execution of menu items using the script below (source: prevention of execution of menu items |) IndiSnip [InDesign® extracts])
#targetengine disableItems var disableNew = app.menuActions.itemByID(257).addEventListener("beforeInvoke", stopMenuEvent); function stopMenuEvent(stopMenuEvent){ stopMenuEvent.stopPropagation(); stopMenuEvent.preventDefault(); }
I want to access the same menu item without closing the application InDesign. There is a function called startPropagation()?
Kindly advice.
Thanks in advance,
Sanon
Hello Sanon,
Name of the event as the number of line 3,
#targetengine disableItems var disableNew = app.menuActions.itemByID(257).addEventListener("beforeInvoke", stopMenuEvent); disableNew.name = "name" function stopMenuEvent(stopMenuEvent){ stopMenuEvent.stopPropagation(); stopMenuEvent.preventDefault(); }
Then use the line delete event
app.menuActions.itemByID(257).eventListeners.item("name").remove()
Kind regards
Cognet
-
I have a function called mid()
I need to be called in a list item
So, in the absence of value if I write full function
then it works
But if I write the name of the function
IE mid() it doestn work
How can I write function when the default type is the type of function.
I just need to add the nomfonction()
For now, I get the result when I use the full function.ie but what I have is instead of writing all the content
I have a mid() function instead of writing all these materials......
DECLARE
default_value NUMBER (10);
default_valuec varchar2 (20);
BEGIN
SELECT EmpNo INTO default_value FROM MASTER_emp WHERE USER_ID = apex_custom_auth.get_username;
RETURN default_value;
END;
How is it possible...
Thank you
Published by: zycoz100 on October 21, 2012 12:16 AMIt's
return functionname; //so... return mid;
-
I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi
Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.
< personal information under the direction of the host >
-
Number of the caller appears on my other iphone too
Number of the caller appears on my other iphone too, any suggestions?
Yes.
Do not use the same Apple ID on more than an iPhone. Each must be treated as if another person is the owner.
-
I lost the toolbar which had different sections... especially the bookmark to which I used regularly. How can I get it back. Is there a number I can call to have someone walk me through the process of restoring this toolbar with bookmarks column.
As with most of the browsers and other free products, there is no phone support for Firefox.
It seems that you could try to turn the Bar Menu on. It is factory set by turning off in Vista and Windows 7. See the following for instructions:
- https://support.Mozilla.org/en-us/KB/common-questions-after-upgrading-Firefox-36#w_why-are-the-menus-file-edit-view-etc-missing
- Other frequently asked questions after update of Firefox 3.6.x: https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
What happens when a number of blocked calls a person and they're on another line?
What happens when a number of blocked calls the person and they're on another line? Does go directly to voicemail, or ring several times to voice mail?
If "on the other line" means on another call and call waiting is activated, the blocked call goes straight to voicemail.
-
Tecra A9 tcrdmain.exe Vista Runtime error R6025 pure virtual function call
At the start of Vista, I get the following runtime error:
Program c:\program files\toshiba\flashcards\tcrdmain.exe
+ R6025
+ pure virtual function call.
Concerning
Friend Nel
Hello
I see that this error is due to the flashcards\tcrdmain.exe.
This flashcard application belongs to the Toshiba Vista Package added value and I think you should try to reinstall this package again.First, he must remove the old system VAP. Download the most recent PPV from the European driver Toshiba page, then reinstall it.
Good luck
-
The API XNET-CAN allows to hardware configuration such that a call to read the framework/signal does not return until the message is received (no need to query the buffer, call to the function is as an event... function returns when a message is received) or if a time-out occurs). I don't really want to query for data, unless I absolutely have to. My plan is to have parallel code to wait for a specific message to receive and respond (should be very fast!) whil a different loop receives all other executives.
A time-out of the reading function call would work pretty good, but it doesn't seem to work (see extracts attached). The value of timeout only seems to work (no error property) is a value of 0 seconds.
Thank you
Todd
Change of a single point of session for a queued session.
-
How does the library function call Labview? Can I emulate using C++?
Hi all. I recently finished writing a dll CUDA for LabView, and now I'm in the steps of optimization of code, memory management, etc. BUT since my code depends on the entries of Labview (lots of data under types of specific data as table manages and Clusters labview) I can't use the CUDA Profiler or the Profiler VC ++ on the DLL. What I intend to do runs labview and then out of all data entry for the DLL in a binary file and then add an additional function in my code that will read in the binary file, allocate and assign variables to their respective positions, and then call the specific DLL function in Labview. In the end, this miniature function will act as the library function call to my specific group of data entries.
In any case, I started to make this purchase all my data entry of cluster and it comes out in a binary file. And then I started the initialization of the handles of labview, allocating memory and begins to write the binary data in the memory and it works for integers (ints), floats, etc., but I'm confused on how it works with table handles!
Some examples of code:
Sets the Handle for table 1 d for INT
typedef struct {}
int length;
int val [1];
to access the value in a row-online val [Online]
} Array1dInt, * Array1dIntHandle;int main()
{
Array1dIntHandle x = new Array1dInt *;
(* x) = new Array1dInt;ifstream file ('TESTDATAIN.dat', ios: in | ios::binary);
If (file.is_open ())
{
file ((char *) &(*x)-> length, sizeof;)
file ((char *) &(*x)-> val [0], sizeof (int) *(*x)-> length);LabviewSpecificFunction (x);
leader. Close();
} else
{
< "file="" did="" not="" open!"=""><>
}
return 0;
}__declspec(dllexport) LabviewSpecificFunction (Array1dIntHandle x)
{
...
}However, my program crashes when the table is nominally big, and it is expected, because if we look at the Array1dHandle, it has allocated only enough memory to 1 item of value! YET, somehow, in its magical and mysterious labview is capable of making val [1] be val [HOWEVERMANYYOUWANT], even if C++ 101 says that val [1] is a constant pointer, and even if I dynamically allocated memory another somwhere, I would never be able to put these data in this round!
Can you explain, or maybe even write example on how I can fool my program into thinking that the binary code comes from labview, so I can then run my program independent of allowing me to profile the functions inside labview?
I hope that this question is clear and my sample code is also clear, but I'm happy to answer any questions that relate to this.
Thank you all!
I think that I thought about it.
Array1dIntHandle x = new Array1dInt *;
int tempsize;
file ((char *) & tempsize, sizeof;)
(* x) = (Array1dInt *) malloc (sizeof (int) + sizeof (int) * tempsize);
(* x)-> length = tempsize;
file ((char *) &(*x)-> val [0], sizeof (int) *(*x)-> length);Well enough, you will need to make the handle, and then make a new Array1dInt * for him, then read in the length of the array in a temporary variable. Then use this information to then malloc memoery quantity you need for the table and pass this place on the handle. Now the handle will point to the size of the memory and you will be able to access the memory in the format, you've done the handle. Badabing badaboom
-
Make sure that wire you all the inputs and outputs of your node library function call?
This document says "make sure that wire you all the inputs and outputs of your node library function call.
But all the terminals on the right side of the call library node considered "outputs" referred to in the foregoing statement?
This same document continues to show the right way to allocate memory with this illustration and in the illustration, the right "outputs" are left without junctions.
Am I right in assuming that the only terminals that count as outputs, those who use the code of the DLL (modify) as output? If it is true, then all other terminals output associated with the values entered alone so don't really account as outputs, correct?
In the parameter call-library configuration screen there is a "Constant" check box and the help that he wrote "indicates whether the parameter is a constant." What is this box? for me in the setup of the DLL call
Finally, assuming that a call from the DLL that is supposed to write in these five outputs, is it legitimate to use constants like this to book a space of memory for the output values?
How about if local variables associated with the output terminals are used instead?
Despite the linked document, it is necessary to connect the corresponding entry for simple scalar output parameters (for example a digital). LabVIEW automatically allocate memory for them. If you do not want the entries for all the output wire anyway, there should not be no difference between a constant and a local variable; I would use a constant to avoid useless local variables.
For settings that are only entries, there is not need to connect the outlet side. It's a bit simplistic since all parameters are entered only and get one result (other than the return value), you pass a memory address and modify the content to this address, but LabVIEW manages this dereferencing pointer for you. If you want to really get into the details, learn more about pointers in C.
The "Constant" check box acts as the qualifier "const" on a c function parameter. It tells the compiler that the function you are calling will not change this setting. If you call a function prototype includes a const parameter, then you must mark this as a constant parameter when you configure the call library function node. Otherwise, I wouldn't worry on this subject.
-
Questions MathScript Matlab function calls
I have a question about the m-script function call (MATLAB) in Mathscript Labivew 2009. I have attached my buggy vi for an example:
1. I called a function 'remodel (Sigma0, [O O Q M])"in Mathscript, it gave me a syntax error, but not in Matlab R2009b. I guess that it does not tolerate a great deal of input parameters. Any idea as how use the reshape feature in Mathscript?
2. Another problem is that I've defined a function m-script with 2 parameters, in Matlab, I can call the function with a single parameter provided, however in Mathscript, system reports error if I only provided 1 parameter to a function of 2 parameters. Any idea as how to cope with this problem?
Because I have a lot of code in the format m-script, I don't want to rewrite a lot of new code.
Thanks for any help.
Hi aggressor.
Indeed there is a small difference in the matlab function and labview mathscript reshape function reshape. The difference is that Matlab is considered always any 2D array from the perspective of lines... where LabView considered from the perspective of columns... that is, if a table 2D likeX = [has and b, c and d] is here and the (x, 1, 4) reshape in labview will give out like a, c, b, d in an array, matlab, the output will be has b, c, d in a table.
And in Labview syntax you gave will certainly give a syntax error. Please visit the labview syntax help.
Thank you and best regards,
srikrishnaNF
-
How to extract a macro function call arguments
Hi all
I need help related to Macros in C.
This is my code:
#ifndef checkTrace
#define checkTrace (CAFC) if (1) {printf ("function called checkTrace is :") ;}
#endifI am looking for is:
Suppose that is called checkTrace (getchar ()); I want to print 'GetChar () is called from checkTrace macro.
Like this whatever the button func called by the macro checkTrace, I want to print the message as above mentioning the button func called by checkTrace()
Any body let me know how I can do this in CVI?
Any help will be greatly appreciated.
Thank you
Herald
I think what you need is the operator "stringification": #.
Check this box:
#define checkTrace (CAFC) if (1) {printf ("function called checkTrace is: ' %s", #fCall) ;}}
checkTrace (getchar ())
Maybe you are looking for
-
Can't see the Firefox window when it starts.
Running Windows 7 Home Edition. Opening of Firefox, the window appears to try to open to the right of the screen. There is no set visible window other than the little preview in the taskbar. As a result, I can't drag, click or access options. This ha
-
Where to find the driver Hotkey Utility for Satellite M115-S3094
Hello recently bought a Toshiba Satellite M115-s3094 laptop and you want to install the utility driver hotkey.Can't find it in the download from toshibas support website. Thank you
-
Satellite L650: possible to upgrade P6100 for Core I5 - 460
HelloI m new.The question is: I can uprade my L650-1JT to a L650-1KR. or are the different MOBOs? I thought that they have the same socket and I just changed the processor, so I put an I5-460 in., but now the laptop computer dosn´t start. just the le
-
Satellite L300 PSLBGE XP - How to activate Bluetooth without using FN + F8
Hello! I just install WinXp on a satellite L300 PSLBGE by Toshiba... and the FN key does not work. At the moment I have to activate bluetooth... but FN + F8 does not work. What can I do? I installed Hotkey, save energy and controls (1.0.0.8)... FN do
-
I want to buy a Canada iTunes card, I bought on a trip, but I don't know how to change the country from Mexico iTunes to iTunes Canada