Number of queries of database per second

Similar Questions

• What is the difference between write queries and written per second in vCOPs?

  I had on my farm performance problem, when I try to understand by vCOPs I noticed there are two similar measures write queries and writes per second.

  Do you know what is the different between the two measures?

  IO reqs vs real E/s is written. Reqs will be usually higher and includes administrative scsi commands. Written per second is closer to PAHO are / s.

• I need to improve the performance of a Web site and I want to track the total number of requests per second...

  I need to improve the performance of a Web site and I want to track the total number of requests per second... we are currently hitting...

  Please I need to hit the current with 1200 queries/second application, please help in this regard.

  Hi Nivask,

  If you created the Web site, the question would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for assistance:

  Internet Explorer Web development

• Increase in the number of samples taken per second

  So I am a beginner in LabVIEW, and I work in a program to help me with some research. I enclose my VI below, and I take the data at a rate of almost 2000 samples per second (using the express deadline fixed VI a.001s). However, I need to be taken of data to approximately 10,000 samples per second, but if I try simply decrease the amount of delay (up to a.0001s), does not increase the sampling rate. Someone at - it thoughts/solutions to tide me over? Thank you.

  Use the example Finder and search for the "Input.vi - continuous voltage.  It is a good example of an acquisition of base.  There is also a built-in DAQmx called Logging configuration.  When activated, DAQmx will automagically be journal of task data to a TDMS file for you.  Use the continuous acquisition and set the frequency of sampling to the desired frequency.  You will need to read multiple samples to stand.  But this example is a great place to start.

• How to set the number of packages to be send per second on the serial port in labview

  Hello.

  I need to send data to the serial port such that each data packet must be sent at a rate of 4 packets per second? How can it be done?

  Thanks and greetings

  What defines a package?

  You just need to have a while loop with a timer waiting for 250 milliseconds surrounding your VISA writing the function.

• How do I see the number of events per second received by MARCH

  Hello

  I have a MARCH installed in a customer demonstration porpuse. Y at - there a way for me to see how many events per second has the MARCH has received?

  In the newspapers of the access list when even if she cannot connect due to the limit of the flow it is said 'missed 20 bags due to pulsations.

  Then maybe the MARCH cannot process all the events, but he can tell how many events, he received per second on average.

  access to the admin-> maintenance-> view system logs and files search messages rates

• Change the number of frames per second

  It's very simple stuff - so I hope I'm missing an obvious answer... that is.

  I have an animation that goes 15 seconds and 16 fps. Total of 240 frames.

  I want to change to 15 seconds at 30 frames per second. A total of 450 executives.

  Is it possible to do - that will keep all the keyframes in relative place? Or I have to recreate the test specimen at 450 and pass each unique to his new position keyframe?

  Thank you for your help.

  T

  Unfortunately, no, you can't do that and keep the same length. You CAN change the frame rate, but increase the rate of 30 frames per second will make the scene twice as long because are presented twice as many images per second.

• Pulse frequency of CO generates actually 1 pulse per second?

  Hi all

  I have a VI installed outside in the attachment below.  I seem to have a lack of understanding on how to program this VI here.  I do not understand what might not.

  The VI is very basic.  The frequency has been set to 1, and the units are Hertz.  For me, this means that the application must send a pulse to my linear actuator ONCE per second.  I have a simple Pulse counter set up in VI so count the number of pulses is actually sent (using the DAQ assistant).  Why is that when I run the program, I get around 300 pulses per second?  Elevate the value makes it goes a little faster, but the value isn't really do go more slowly.  It seems no real correlation between the input frequency and the number of pulses that are sent.

  I just want a program that I can enter "1 pulse per second" or however many impulses I want per second and have the card send a pulse per second (or however much is entered).  Where should I start?  I have an entire program written and ready to go, but this concept of base here escapes me completely.

  Thank you

  James

  Attached: photo 1) of the concept that I am completely baffled on 2) VI of my program that says the concept is used in

  In the simple image, you run a loop as soon as possible (it has no timer mechanism).  Inside this loop, you configure the task of the pulse, run it, then immediately stop and disable.  You need to create the channel and configure the synchronization outside the while loop before it starts, and you need to clear the task outside of the loop this way, after the while loop ends.  Depending on what you want to do, you should be able to move the beginning of the task outside of the loop this way, or simply let the task automatic start.

  You will need to restructure your VI a little.  I can't tell if you want to delete the task after each step, or simply change the frequency.  If it is just the frequency, you can use DAQmx write to change; If you need start and stop the task, you will need logic to do once whenever you want to start (you can get an error if you start a task that is already running).  There is no need of "Is the task performed?" since you do not use the exit for what it is.

  EDIT: Also, it's always a good idea to put a waiting inside loops that run indefinitely.  Otherwise, they will turn as soon as possible, all processors available time and prevent any other code to run.  If you configure your task to meter correctly the time loop will not affect the value of the pulse (because it is done in hardware), but there is no need to run the quick loop.

• TIFF sequence: 30 frames per second instead of 23.976 - a problem?

  When I imported a Tiff in AE sequence, he came to the default 30 FPS - and I have not noticed. I'll use the rendered output in a project from creation to 23.976.

  The tiff sequence is actually a scan of a Super 8 film running at 18 frames per second. In AE I time it distorted 75% (18/24 = 0.75). It seems to me that it doesn't matter what fps I use AE, as long as I have the Time Warp correct factor.

  I guess in the first, I simply interpret the images to 23.976 and everything will be fine. But just in case I missed something, I thought I would check here.

  response of chrisw44157881 and the idea of application in time, and then by time accomplish nothing and may eventually give you frames that are more of a mess. This shows a lack of understanding of the functioning of these effects and the rendering pipeline.

  I would try to explain. I'll use screenshots. Here is a model with a film of 18 fps in a 23.976 model. The film is 2 seconds long and the comp is 2 seconds long. The times correspond exactly.

  

  ICT is set to 1 second. My goal is to make the additional images and fill in the missing query any way I can do is to define the interpretation of the images to match the model. This makes the images too short and requires that I have do the stretching of time, time remapping or time distortion. Is there an easier way to much to do that I should have explained the first time. I'll do it now if you don't have to read the rest of the post.

  The easy way and the best way to get unique images of filmed at a different rate is to interpret the images just as he was shot, which in this case is of 18 fps and drop in a model that is on the rate you want to use for your project. In the case of 23.976. To create new images, you can try to turn on frame blending first to see what this will give you. Then you can try moving the pixels. Then, you can disable these two and apply Timewarp. The default settings for time warp for vector detail and smoothing are almost exactly the same that the displacement of the pixels, so you will need to increase these parameters if you want better results. All you have to do is to set keyframes for the image of the source instead of using the time to get Timewarp to work properly. If you set your timeline on frames instead of timecode, it is easy to get the total number of images of your film. That's all there is to it.

  

  If your intention is to maintain the original speed of the clip and just better generate additional images, that's all that is needed.

  This shows the clip played at the same rate as the comp with stretch time and interpolation:

  

  It is images interpreted at 18 frames per second with the ITC on the same chassis with interpolation switched on. It's exactly the same thing.

  

  It's time to try the displacement of pixels. It gives me a better interpretation of the frameworks I want but it gives also some weird jaggy lines to mobile star:

  

  There is no adjustment for the displacement of the pixels. He did a great job on some aspects of the movement, but in this case, it doesn't quite work.

  chrisw44157881 idea of using Time Warp to create a bunch of new frameworks and then extending using stretch of tine will not give you unique images without interpolation or displacement of the pixels lit, you will give the ghosting that you would get with just on interpolation and introduce the vector objects that you get with the movement of the pixels in this scenario. The end result is a gain of zero. You are better off and will get made faster if you come to use Timeworn and get details of the vector and softness like light to give you the best unique images. As soon as you add TimeStretch or time-remapping and turn on moving pixels takes you back to the same thing you get with default Timeworn that will not work well on certain types of motion in the frame.

  So now, here's the really amazing part. If you work in Premiere Pro, interpret the images he is shot, drop the images into a sequence of 23.976 images and select speed/duration time interpretation flow optics or interpolation you will have new unique mounts exactly the same thing you get in AE. It takes about 10 seconds and you're ready to change or make your project. The only reason that I would never treat a clip like the one you work in AE using Timewarp is if there is any movement that everything has not look right or otherwise seen full-screen at speed.

  

  So in summary, if you want to maintain in real time with your film sure that interpretation corresponds to the frame rate. If your model or your sequence is a different cadence that your images and select interpolation or Pixel motion to AE or interpolation, or Optical flow in Premiere Pro using the speed setting and check a test to return to playback full screen in real time. If the movement looks good, then you are finished. If there is movement artifact problems try Timewarp in AE or Twixtor if you can afford, or one of the Borris effects. If none of these work for you then you will just have to live with the duplicate images that 90% of your audience will never see.

• How to find the total number of queries from the awr report

  Hi all
  
  Is it possible to find on the total number of queries fired on the database of an AWR report.

  No, it means that there are 26,459,500 executions and captured SQLs accounts 93.9% of total executions, i.e. the 24 845 execs 470.5.

• The latest version of iMovie supports 30 frames per second?

  I tried creating a simple slide show, but could not find a way to make 30 frames per second, with 60 being the default and automatic.

  Although it was several months ago but I remember not being able to find a way to select the 30 images (if this option was available at all).

  So my question is: how to make a slide show and make it to 30? I choose my desired pace at the beginning or at the end? Can I do it at all?

  And Yes, I use the latest version of iMovie .

  Yes, the latest version of iMovie supports 30 frames per second.   You set the frame rate by adding a 30 fps known as the first video clip vid that you place in the timeline of your movie project.  After you have added your other pictures/clips, you can remove the first clip if you wish.  The project will have already been set at 30 frames per second.

• I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?

  I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?

  Yes.  The frame rate (and resolution) of a project is determined by the first clip set a new timeline for the project.  So put a clip known 30 fps (with the resolution you want) in a new project timeline then copy everything from your existing project in the new project.  You can then remove the first clip if you wish.

  Geoff.

• Since the update to 14.0.1 javascript error appeared (this.transforms is not defined - 3-4 errors per second)

  Our phone system of companies has a web interface since the 14.0.1 update is no longer works. I tried to open it in safe mode with no extension active and ensure that cache has been cleared. In the error logs, I see "this.transforms is undefined" and is repeated 3 - 4 times per second, no matter how long the page is opened. Many pages in the web interface are compressed and if I select a different tab background change but not the areas that fall within her and all submit buttons are ignored.

  It works in other browsers and in older versions of firefox, so our miracle temp to say personal use Chrome until we have a chance to roll back on Firefox, even if we are not sure if Firefox is simply updating again.

  Finally solved the problem. Discovered that the issue was only happening on HP systems so that it narrowed down. Yet a new windows install using their disks restore would fail on the new update (but only if HP utilities were all re-installed - for example, as fingerprint reader security utilities). I got some new updates for those and the problems went away. Yippee. My guess is that it was the security utilities that run in the background, because they are not browser so plugins work even in SafeMode to browser.

  Glad we got going I didn't leave Firefox. What a pain though, as he had really left me speechless.

• Can I export to 30 frames per second instead of 60 frames per second?

  Hello

  Is there a way to export an iMovie at 30 frames per second instead of 60 frames per second? All my clips were imported at 60 fps (how they were shot), but I have a problem with playback on devices and systems, so I want to get to 30 frames per second. I can't seem to find a way to settle this, as 1080 p/60, 720 p/60, 540 p/60 are my only options when I try and share/export to a file.

  Help!

  Chris

  iMovie will define the project frame rate based on the first clip you add to the timeline. Add a 30 fps clip known as the first clip in the timeline panel, and then add your clips to 60 frames per second. The rate for the project should be 30 frames per second. Then go back to the first clip and read a part of it. You can then delete this clip and the pace is expected to stay at 30 fps. You can share at 30 fps.

• White LED of Ethernet to the router flashes constantly (to about 5 flashes per second)

  The Internet on my router Netgear (R7000 Nighthawk, AC1900) white LED flashes constantly (about 5 times per second), and it is originally the link on my modem light blinks constantly. All started about four days ago. I thought that my modem was defective, but I spoke with my ISP technical support who said it was the router that has been at the origin of the modem LED blink. I unplugged the power supply to the router, but when I plugged it in the problem has not been resolved. I also reset the router (using the reset on the back of the router) but that has not solved the problem. Any help would be most appreciated. Thank you.

  View that statistics is one of the purple buttons under the Internet Port pane.