Number of the sequence in the form of the ADF.

Similar Questions

• Note the serial number of the UUT in the main sequence

  Hello

  I want to write the serial number of the object to be measured on the main sequence.

  I know that I can access this value through RunState.Root.Locals.UUT.SerialNumber. I can write the serial number in this variable and it works as long as the report is not generated on the fly. If activate on the fly to have pointed out, my serial number of UUT report rest to 'NONE '.

  Is it possible to force the regeneration of the report with the last value of variables? I noticed that there's something similar for the runtime. During the execution of the sequence, on-the-fly feature enabled, the report indicates "0 seconds" for the period of performance. However, when execution is complete, this report field is updated with the actual value.

  How to do the same for the serial number?

  Thank you

  Alex

  OK, ATML seems to create the problem. Using XML reports, it works as expected. What is a work around for you?

  Norbert

  EDIT: Classified CAR 491296 against ATML OTF reporting

• change the ip number of the Forms Server

  I had to change the ip number of the server forms (forms 11.1.1.4 weblogic 10.3.4) on server 2008r2.

  This is wrong. The weblogic administration console works fine, but forms does not work. Nothing can connect to shapes

  ports. Far as I can tell in weblogic should not have to be changed, because everything was in terms of the

  host name Windows which is unchanged, or the domain name that is also unchanged.

  But it does not work. I tried to use the command chgiphost on webtier who is also installed and that

  did not work. According to doc 1350961.1 the script went wrong in this version of the fusion. I tried the

  suggested new script and that does not work either. (null/config/OPMN/opmn/opmn.xml is an invalid file)

  Any ideas on things to look at would be welcome.

  I thought about it. too bad, it took a week. To set up a replacement Forms Server, I tried to follow

  1060058.1 who advocated in this hard coding a number ip in instructions for weblogic. Then

  It dawned on me that I had done something like that in the old form server I had set up to

  launch at startup of the machine. The command to do so had been deposited in the windows Task Scheduler:

  c:\blahblah\bin\StartManagedWeblogic.cmd WLS_FORMS t3 / / SERVER: 7001

  Was it that the number of bad ip hard coded in there somewhere? I disabled this command, restart and

  has been able to start weblogic manually and... it worked. I guess the old ip number had been encrypted somewhere and this is why a search for her as a text did not. I vote for not hardcode in fabric ip numbers. Pouvez instructions

  for 1060058.1 be changed to not to use IP numbers? It would be a big step for mankind oracle.

• Order form does not update grand total calculation until I have indicate a number on the next line.

  I created a purchase order with a "quantity" column, a column of job description, a unit price column and a point $ column total. I've set the total column of $ point to calculate automatically once a quantity and unit price entered, and it works immediately once the unit price and quantity entered. But my grand total at the bottom of the total column $ is set to calculate all the lines of total $ point, but the total general don't not updated to reflect the $ total for a given line (e.g. line B) until I have begin to type a number for the next line (e.g. line C). So, I always end up having to create a line of extra reserved space with a quantity of 0, just to get my total general to update. Is there a way to fix this?

  It is most likely a problem with the calculation of field order. You must ensure that the total is calculated after row grand totals.

  This can be set in form editing mode, under the order of computation of Set field - other tasks.

• I am trying to retrieve a serial number of the CS6 Adobe Design Standard product, that I bought, but when I fill the order fulfillment form in the 'Adobe Support Customer Portal', one of two things will happen. Either my proof of eligibility isn't uploa

  I am trying to retrieve a serial number of the CS6 Adobe Design Standard product, that I bought, but when I fill the order fulfillment form in the 'Adobe Support Customer Portal', one of two things will happen. Either my proof of eligibility will not be downloaded and then sometimes the 413 error indicating "header length too large." How to do this?

  remove the cookies from the adobe.com site or use another browser.

• Need me a new case number for the license transfer form? I'm the beneficiary of a transfer of li

  Need me a new case number for the license transfer form? I'm the beneficiary of a transfer of license product registration. The person transferring has already completed and returned the transfer of license form. Can I use the same number, or do I need a new number.

  You have to get a new number for you because the transferor and the recipient cannot use the same number.

  Reference: I talked to an officer of Adobe, and this was the answer they gave me.

• How to get the real serial number of hard disk in a form

  Dear all,
  
  Can I get the serial number of the disk hard real in a form?
  
  Help, please
  
  
  Thank you

  It seems that HOST() set some environment variables, then the path to the wmic.exe is not found. The following works for me:

  host('cmd /c "c:\windows\system32\wbem\wmic path win32_physicalmedia get serialnumber"'||' > '||'c:\AA.TXT',NO_SCREEN);
  

  François

• Compaq 4000 Pro small form FAC.: part number for the Compaq 4000 Pro Small Form Factor Windows OS

  I am looking for the part number for the Windows 7 Professional SP1 reinstall the operating system on the desktop LTS Pro 4000.  I'm working on the reinstallation of the operating system on a computer group for a company that installs and got mixed albums and I can't match what disks go with what models.    Now, my problem is the Pro 4000.  I have a disk with the part number 650432-DN3, which says "for Distribution only with a new HP or Compaq PC.  32-bit software.  Is it possible to determine whether this is the right drive for this machine?

  TIA for any assistance.

  Hello:

  This disc is not specifically for this model.

  It's for a business laptop, but you should be able to use this disk on a desktop HP business or a laptop that came (or could have been) with windows 7 Pro.

  You must then install all the drivers you need for HP 4000 Pro support page.

  There is no need to enter a product key.

  The recovery disc for a Pro 4000 would be in a set of at least 3 and numbered accordingly.

  Also, it would be labeled HP Restore Plus.

• development of application forms with migration of the adf in mind

  We continue to maintain an oracle forms application which is scheduled for the re-engineering of oracle adf.
  
  in the world of forms with the current oracle it is customary with a new table to produce the dml with api table designer. the only api table will provide the primary key for records based on the used select value max + 1.
  
  If the re-engineering of oracle adf is a future requirement... so how should change to facilitate development?
  
  must provide the value of the primary key by a sequence and relaxation? and relaxation should look for a zero or negative value before completing when inserting?

  That triggers the code works fine. What happens is that ADF will initially have a negative number when the row is inserted, and so the relaxation will assign the actual value of the PK of the sequence. The other way (as documented) would fetch aggressively the ADF sequence when the row is created. I have used both approaches, but tend to lean a little towards relaxation.

  John

• Impossible to enter the telephone number during the application free trial

  Hello

  I am applying for the UFT HP (formerly QTP) carry out a feasibility study check on a system at my workplace.

  However, when I reached the part of the form that asks me my phone number, I don't do anything enter successfully without precisely knowing that my number is not acceptable.

  I have tried everything - hooks of the area code, 0 instead of + 44, halves between the 2 dashboard of the number without the dash, a halves to separate the 2 space number - nothing works!

  It's incredibly annoying, because I just want to test the software out, a nd if it works I will get a license.

  Can someone please help me with this?

  Thank you very much

  Hello Basijan,

  You want to ask your question on the HP Enterprise business community which is a forum for the company's products.

  Here is the direct link to the area you want.

  News of functional tests (formerly QTP) unified and Support Forum - HP Enterprise Business Community

  It will be useful. Good luck.

• Number of the stop, blue screen

  my computer does not restart. It's a windows xp just continues to display on a blue screen. It is said that a problem has been detected and windows has been arrested in order to prevent the damage., but does not restart. There are a number of the stop, but no error number. the number of stop is 0xoooooo7e (0xc0000005, 0xf924530c0, 0xf96e152c, 0xf96e1228). can someone help, I can't do anything at all. Thank you.

  If you have not recently changed hardware or drivers, this Stop error indicates generally bad RAM (memory). I like Memtest86 + www.memtest.org . Of course, you must obtain the program from a working machine. You will download the .iso image file to create a bootable cd. You will need a third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• is there a phone number for the United Kingdom for oulook overview

  is there a phone number for the United Kingdom for oulook overview

  Currently Microsoft only supports free customer Forum.

  For account related issues see the new forms secure online here

  
  Unfortunately there is no 'live', e-mail, chat (for account related issues), or 'phone' support for Hotmail.com, Live.com or Outlook.com

  If you've got direct support, by phone or chat, for Outlook, you may have been scammed.

• Serial number after the interactive report filtering

  Hello

  I have an interactive report. In the report, I have column named serial number which is generated using "row_number over (order by id). When I filter certain data of the serial number is the line number sequence, but I want to put the sequence based on number after filtering like when name rownum-100-samia, after the filter by samia serial number must be 1. Is this possible? I'm sorry if I can not write properly!

  Hello Samia

  Have you seen the next thread? Maybe it can help you work.

  Indicates the number of Clotilde in an interactive report

• What to put in the xsd schema for the form of the ADF radio buttons?

  Hello, we create a form generated from the data of a HT ADF auto which is a type defined in a schema .xsd. Which schema component Let's in the .xsd schema correspond to buttons option in the form of the ADF? For example, in our .xsd we just

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < xsd: Schema container = ' http://www.w3.org/2001/XMLSchema "xmlns:wf =" " http://www.example.org "

  " targetNamespace = ' http://www.example.org "elementFormDefault ="qualified"> "

  < xsd: complexType name = "FormDataType" >

  < xsd: SEQUENCE >

  < xsd: element name = "FirstName" type = "xsd: String" / >

  < xsd: element name = "Name" type = "xsd: String" / >

  < xsd: element name = "Department" type = "xsd: String" / >

  < / xsd: SEQUENCE >

  < / xsd: complexType >

  < / xsd: Schema >

  What would be the element / type etc be for radio buttons?

  Hi Tali,

  It depends on what you want to do with radio buttons, but it would be better to be a part of string in most cases.

  This could be better handled on the ADF OTN forum, but I'll take a shot at it.  If you have many items to choose from, you can use the string "Department", you already have in your XSD.  When displayed on the form, include various departments with radio buttons next to each other (for example,"manufacturing", "Marketing", "Sales").

  Because this is the BPM forum, I guess your XSD is used as data for a human task which in turn used to create a form of the ADF.  If this is the case, you can use your "Department" in your XSD string element that has already been placed on your form as a text input field.  The reason is the link that you need to update the element of the human task service is automatically created in this way.  Select this field to text, and then in the properties panel, copy the text that is in the 'value' of the field (you stick it in the Value property of the Radio group you will add in the next step).

  There are two ways to get the radio buttons on the form.  You might drag the "Radio group" widget on the form-> click on radio to 'Create a list (select an item)' button-> click the Add icon to add the choices you want to appear on the form (for example,' manufacturing ', 'Marketing', 'Sale').   Once this was added, paste property value text you copied in the previous step into the field of "Value" property of the new Radio group.

  If you select the radio button of the new group source, it should look like this if you wanted two choices for your radio buttons:

  After this has been added, delete the existing text entry field that was created when the form was generated automatically from the human task.

  Hope this helps,

  Dan

• The number of the piece of paper in payment Manager

  Hello

  I would like to ask, on what basis the numbers of paper in the Manager of payment documents are sorted? I know that the number of the document is created based on the payment Document that we put in the configuration of the bank account in cash management. In the payment Manager, all payment in the payment request process are grouped by providers/trading partners and each provider has its number of paper document. However, I couldn't get that number is sorted by what in the payment Manager. Is surely not by name (alphabetically) provider, or the amount of the payment. It's random sort? Can someone help me, please? Thank you.

  Best regards

  Juanluis

  Hi, TarunSharma,

  Thanks for the reply. Can you tell me what form should I define the sort of payment as you say?  Thank you very much.

  Best regards

  Juanluis