Numbering of the permissions

Similar Questions

• Hello, how get the permit numbers on site licenses (LWS), the identification number of the end user, nothing happens. Thank you

  Hello, how get the permit numbers on site licenses (LWS), the identification number of the end user, nothing happens. Thank you

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• GSM numbers in the TMS directory

  Hello

  I have AD facility as a source of the telephone directory in TMS for video settings. I'm having a problem where the GSM numbers for users on endpoints TP are appearing as H320 and so the calls fail. I have a VCS/TMS connected to CUCM and want to route mobile calls to CUCM and then get out. Is this possible.

  Thank you!

  Then I was watching your definitions of zone again.

  • TMS needs to know that the endpoint can make H.323/SIP
  • The permissions for the system in the browser from should not be the call blocking options (settings down to change the planning parameters)
  • The endpoint must be associated with a zone of intellectual property with a defined gateway prefix
  • The area of intellectual property must be associated with a correctly configured ISDN zone
  • Route of the directories = yes

  If all this is in place, TMS will be able to deliver to an end point unique h323 call entered ISDN or telephone through the gateway prefixes defined in the area.

  If the entries are not displayed, TMS does not believe he can do a call from the bridge... the lack of supported protocols or failure of registration status.

  You can test this by creating a simple dummy directory with just the vocal entries in it.  Then associate this directory to your endpoint.  If it's an MXP, you can use the web interface of the endpoint to display the directory of the business directory provided by TMS.

  If you can not make it work again, I'd recommend appellant TAC where they can walk through your configuration with you.

• Unable to repair the permissions of the library!

  Hello

  I'm pulling my hair out trying to restore access to my library of Photos...

  My photo library is located on a Synology NAS. After update macOS Sierra, I would lose permanently the connection to my NAS. Someone on another thread said to use SMB instead of the AFP for file transfer services. I did, and the connection has remained stable; However, since any attempt to open the pictures gives me an error message "repair permissions Library" and wrote "this library is locked or you don't have permissions to make changes. Photos can try to repair the permissions'.» I try to repair the library, and after about 20 minutes, I get "error repair permissions.

  Finally, I opened the console to see what was going on, and that's what I saw when the error occurred:

  Library Permission repair failed: error Domain = RKRepairLibraryPermissions Code = UserInfo '(null)' 3 = {NSUnderlyingError = 0x61800025ecf0 {error Code Domain = com.apple.library - repair.error = 4 "(null)"}}

  If anyone can decode this to give me a clue as to what is happening and how to fix it? Or is there any other suggestions?

  I would appreciate any info at all...

  See you soon,.

  Chris

  Vancouver, BC

  My photo library is located on a Synology NAS

  Photos is not compatible with the NAS volumes.  Photos libraries need to be located on an OS X Extended (journaled) formatted volume.

  So, copy the library on a volume formatted correctly and open it with Photos.  You may need to repair the library by launching it with the command and Option keys.

  

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• for months now, I can't watch anything with flash, as it insatlls but does not work, it is defined as still active in the list of addons, and the permissions are active

  I 35.01 FF and can't watch videos requiring flash, it installs ok (or seems as indicated in addons with correct version number) and is set to "always active" in the addons, and I set the permissions on some sites to 'always', but nothing helped. I have now returned to use IE, I would prefer to use FF, but this problem is driving me crazy.
  Thanks in advance

  Dear john99 Further info, I disabled plugins RealPlayer and as you can imagine, they seem to interfere, I activated the flash stopped again, them off and flash now works. Thanks for you input it was greatly appreciated. I can now safely, go back to my beloved FF :)

• Display of training "open goal" app to view 3 numbers at the time. Now, there are only 2. Why apple changed the display of training app?

  Display of training "open goal" app to view 3 numbers at the time. Now, there are only 2. Why apple changed the display of training app?

  Hello

  If you prefer to see your distance goal, the calories or the time displayed as a number instead of as a ring of progress:

  -On your iPhone, in the application of Eve, go to: Watch My > Workout - turn on show metric goal.

  More information:

  Use of the workout on your Apple Watch - Apple Support

• You cannot change the permissions of the user

  Hi guys,.

  I have a MacBook Air, which started with the 10.11.4 2014 loading screen and would be turned off once the progress bar moves to halfway.

  I ran MRI what diagnosis came thin and storage said it was a software error.

  I removed the SSD drive and placed in a basket so I can see the SSD on my iMac. He goes (to the Mac OS Extended format) and I can see the folder of the user, but under "Sharing and permissions", she says that I can read only. In most cases I would be directly click on the padlock on the bottom right, change the privileges and choose "apply to included items", but it is all grayed out.

  I ran and fixed the permissions through terminal (since I can do is no longer on the disk utility). No idea how to get around this problem? There are files on the SSD drive which unfortunately were not backed up.

  Note: I also tried to run BatChmod but it has not fixed either.

  Any ideas?

  Your help would be much appreciated.

  Thank you.

  Repairing permissions has no effect on your Home folder.

  Reset permissions on your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• I exported the photos in a folder that is named in the order. Now I want to export more photos in the same folder, but take the sequential numbers where the last export was stopped. Finally was Apr_409, in following should be Apr_410. Not Apr_1 (1). Any a

  I exported the photos in a folder with the photos sequentially named. Now I want to export more photos in the same folder, but take the sequential numbers where the last export was stopped. So if the last photo was named Apr_409, I want the following to be Apr_410. Not Apr_1 (1). Any advice? Thank you!

  Hat is not a feature of Photos.

  If you want to make sure your new export is sorted after previous export, change the field "sequential prefix" in the Panel of the export to a string, which will be sorted after the original prefix you have chosen.

  

• How can I reset the permissions of folder to Yosemite?

  Well, I have a mac mini 2014 with Yosemite.  I changed the permissions in the folder my documents and apply to the elements included as another admin had read/write access to all items inside.  I did it just to test it to see how to work the reset database folder permissions.

  Then I went to the recovery partition, open the resetpassword terminal and clicked on the reset button for my admin user.

  then I rebooted and was expecting to see my documents and Interior elements folder reset default permissions: it wasn't, another admin has the right to all items read/write.  Shouldn't they have been reset for read/write only for me?  Also: when you click the reset button, greys out as 'done' instantly, should it I wait for it to finish something?  I just restarted immediately.

  I tested it in an another mac mini with Yosemite, same result: no change 'permissions by default.

  So perhaps my idea of Reset bit it won't?

  Follow the instructions given by Linc Davis here:

  Permissions and memory with the HELP of Yosemite!

  C.

• Get the serial numbers for the HP monitor?

  Hello

  I need to get the serial number & s 100 HP monitor model numbers to estimate the warranty end dates. Of course, also for our future inventory internal

  I think that's not possibe with HPDM as a device of Numebers series TC traction.  Is it possible/script to get the serial number of the monitor. ???

  Thank you

  DIN

  Finally, I have a script to get the serial numbers of the monitor.  Rename the attachment to info.vbs
  
  OUTPUT
  
  C:\ > cscript/nologo monitor_info.vbs
  Computer name not found, using the local system.
  Serial number: MXL9040HWP
  Maximum capacity: 4194304
  Maximum capacity: 4096
  Reference number:
  Serial number: MXL9040HWP
  Inventory number: MXL9040HWP
  
  Monitor has)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 264 b
  .......... Manufacturing date = 9/2006
  .......... Serial number = CNK6380R6C
  .......... Name of the model = HP L1755
  .......... EDID Version = 1.3
  Monitor B)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 264 b
  .......... Manufacturing date = 9/2006
  .......... Serial number = CNK6380R6C
  .......... Name of the model = HP L1755
  .......... EDID Version = 1.3
  Monitor C)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 26FB
  .......... Manufacturing date = 4/2009
  .......... Serial number = CNK9170083
  .......... Name of the model = HP L2245w
  .......... EDID Version = 1.3
  Monitor D)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 26FB
  .......... Manufacturing date = 4/2009
  .......... Serial number = CNK9170083
  .......... Name of the model = HP L2245w
  .......... EDID Version = 1.3
  Monitor E)
  .......... Manufacturer ID = NEC VESA
  .......... Device ID = 61BE
  .......... Manufacturing date = 7/2001
  .......... Serial number = serial number not found in the EDID data
  .......... Model name model = not found of the EDID data descriptor
  .......... EDID Version = 1.3

• Watch will not appear the phone numbers in the recent

  Since the update my watch stopped display of phone numbers in the area of recent call in the phone icon.  Last call and the number that is displayed is March 22.  Any ideas on how to solve this problem?  Thank you

  Hi Scott

  It can help to disable the twinning and re - pair your watch. The app shows on your iPhone takes a backup of your watch when unpairing via the app choose to backup restore when the possibility to put courses in place. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Set up your Apple Watch - Apple Support

• Transaction declined and last four numbers on the sheet, not the same as the card is used.

  Transaction declined and last four numbers on the sheet, not the same as the card is in my wallet.

  Hello

  The latest figures, rare are the last four digits of your account number of device, not the last four digits of your credit card.

  To see these numbers on your iPhone, go to: portfolio > tap to select this card > press the 'i' icon (bottom-right) > under the heading card, information the last few digits of your card number and your account number of the device.

  The account number of the device is related to the unique combination of your credit card, pay more the device on which it has been added to Apple (IE an iPhone, iPad, or Apple Watch).

• What can I do when I'm there on the permissions in the top bar I get yahoo search results and not Authorization Manager.

  I'm putting my authorization manager info, but when I put on the permissions in the top box I have yahoo results research and authorization manager is not started. How can I get another way to authorization manager? Or how to get the address bar to work as it should? I look forward to a response.

  Enter Subject: authorizations in the URL/address bar. (Requires the colon and no space)

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How to delete all the phone numbers in the blocked list?

  How can I delete all the phone numbers in the blocked list?

  I want to delete a large number of blocked number, but now I can't remove the numbers blocked by one, are there ways to eliminate several numbers or the complete list at the same time?

  Thank you!

  No sorry. The fastest method seems to be to go to settings > phone > blocked (or settings > Messages > blocked) and select the editing mode. You could make a suggestion to Apple that offer more options: http://www.apple.com/feedback/iphone.html