Numbers of BGP AFI/SAFI

Similar Questions

• TCP intercept

  According to the doc, when TCP intercept's intercept mode "software continues to intercept and transmit packets for the duration of the connection."

  Is this really the case? I expect the software to out the company of proxy when connections (client-side and server-side) are put in place and "knitting".

  Hello

  If you think about it, it is impossible for the router to leave the connection:

  When running in mode "intercept" the following occurs:

  (1) client sends SYN to the server

  (2) this is intercepted by the router and the router answers as if it were the server with a SYN/ACK

  (3) the Client sends an acknowledgement of receipt to the router (and most often grafted on a real demand).

  Now, what happened is that the router has not yet opened a session on the server, because he was waiting to check the clients session was for real (it takes three steps of the latter). It also means that the router doesn't have a clue about all the settings/options that the server would try to negotiate...

  All of these packages also comes with a TCP sequence number that the client/server (router) uses to follow the path she traveled in the session.

  The router now opens the session to the server with the same sequence of events (SYN, SYN/ACK-ACK) but this time serving the customer.

  What you have is two TCP sessions that has its own set of sequence numbers. The TCP intercept feature will now packets from the client are set to the server with the options and sequence numbers correct it is safe. (so-called transparent knitting)... :)

  Did she help?

• BlackBerry Smartphones stuck in emergency call only and can not enter my password safe alpha that will only allow numbers

  After a software (12 hours) update my Blackberry Curve 9320 is stuck in mode 'emergency calls only '.  I have an alpha security password, so it allows me to enter it will allow of only to try to fix or reconnect to the network - numbers from the keyboard.

  Tried to remove and reinsert the battery - no joy.

  How do I either get my password entered or exit emergency calls only?

  Hello

  Resolved to myself.  Already had a digital security password so I tried to put that in.  It was accepted & seemed to allow the network to reconnect that meant while I was off emergency calls only mode & could enter my password safe alpha & enter my phone.

  Rather strange but suggested that my SIM card can hold my old password that I used with my last phone.

  Unusual scenario but the hope that it might help others.

• The numbers won't let me record time

  Hello

  I transferred my data from old iMac (mid-2010/Mavericks) numbers to a new (end 2015/El Capitan). In addition to the fact that I can't use the wonderful version of iWork and I'm stuck with a version with an annoying interface, numbers will not work correctly.

  I have a table to track the interactions I have with my students online. In a column, I record the time spent in particular student tutoring. Although the numbers transferred the old data to the new program, it won't let me enter the duration in. I can't copy and paste. And since I get paid according to time spent, it is a crucial column.

  How can I fix it?

  Thank you

  Kim

  Kim,

  It is always easier to help when you see what you see.  Use this link to help you post a screenshot.  It is safer to remove the personal information from the screenshots.  So duplicate sheet and change called a remove personal information:

  How to post a screenshot on the Apple Discussion Forums

  Explaining what happens when you type in a cell where you try to enter the hour.

• Numbers - cannot export to PDF

  MacBook pro OS X Yosemite 10.10.5

  I have the 08 numbers version 1.0.3

  I'm more able to export numbers in pdf or excel format.  I save the file/worksheet in numbers, then export to pdf or excel format.  When I do this I get the following message is displayed "the export failed.  The selected file or location (drive or directory) is read-only.

  I created new calculation sheets in case there is a bug in the original file.  Same message.

  I tried to create, and then record the Numbers worksheets in different folders and then export - same message.

  I can export Pages documents in the folders where it has failed with numbers - if this isn't a problem with the files.

  I have been exporting documents of numbers as pdf for centuries.  The last I did successfully was 6 weeks ago - I think not I changed my settings to cause this problem.

  I went to disk utilities - these are the results.  Made no difference.

  Checking permissions for 'Macintosh HD' permissions differ on "Applications/Safari.app/Contents/MacOS/SafariForWebKitDevelopment"; should be - rwxr-xr-x; they are lrwxr-xr-x. WARNING: SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired. Permissions differ on "Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html." should be lrwxr-xr-x; they are - rwxr-xr-x. Group differs on "Library/Printers/InstalledPrinters.plist"; should be 80; Group is that 0 permissions differ on "Library/Printers/InstalledPrinters.plist"; should be - rw-rw-rw. they are - rw - r - r-. The user is different on "private/var/db/displaypolicyd"; should be 0; the user is 244.la group differs on "private/var/db/displaypolicyd"; should be 0; Group is 244.

  Permissions verification complete

  Permissions for 'Macintosh HD' repair permissions differ on "Applications/Safari.app/Contents/MacOS/SafariForWebKitDevelopment"; should be - rwxr-xr-x; they are lrwxr-xr-x. Fixed "Applications/Safari.app/Contents/MacOS/SafariForWebKitDevelopment"Warning: the SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired. " Permissions differ on "Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html." should be lrwxr-xr-x; they are - rwxr-xr-x. Fixed "Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html" Group differs on "Library/Printers/InstalledPrinters.plist"; ". should be 80; Group is that 0 permissions differ on "Library/Printers/InstalledPrinters.plist"; should be - rw-rw-rw. they are - rw - r - r-. Fixed "Library/Printers/InstalledPrinters.plist"User differs on "private/var/db/displaypolicyd '; should be 0; the user is 244.la group differs on "private/var/db/displaypolicyd"; should be 0; the group is 244.la repaired ' private/var/db/displaypolicyd.

  Repair of full permissions

  Check the volume "Macintosh HD" audit storage systemChecking volumedisk0s2: Scan for Volume Headersdisk0s2: Scan for disk LabelsLogical Volume 5BBB4053-DA91-41DA-8220-C03D85B05309 on 1 devicedisk0s2 group: Scan for metadata VolumeLogical Volume Group has a Volume of metadata 24 MB with double redundancyStart analysis metadata for a valid checkpointLoad and check the Segment HeadersLoad and check PayloadLoad Checkpoint and check the Transaction SegmentIncorporate 0 most recent control point of no transactionsLoad and check virtual address TableLoad and check the Segment use TableLoad and check the SuperblockLoad metadata and check LVM Volumes B-TreesLogical group contains 1 logical VolumeLoad and check 7E6DBD55-A11C-4CE1-9716-9C2C68D2C8D7Load and check 57F89C23-B45D-40F4-9144-3FE7E96F159DLoad and check Freespace SummaryLoad and check the AccountingLoad block and check Live Virtual AddressesNewest transaction commit handle is validLoad and check the volume 5BBB4053-DA91-41DA-8220-C03D85B05309 hand Segment seems to be OKStorage system check exit code is 0 checking file system. Using the live mode. Perform direct verification. HFS volume logged more control. Check the catalog hierarchy. Check the extended attribute file. File system check exit code is 0.

  Hello robyn anne,.

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to export a Numbers spreadsheet to a PDF document. I know how it is important for you to be able to export your spreadsheets in the format you prefer. I recommend that you test the issue in Safe Mode and also in an another user account on your MacBook Pro. The following articles will provide you with steps on how to restart your Mac in Mode safe mode and test the issue in a different user account:

  Safe mode

  How to test a question in another user on your Mac account

  Best regards

• Firefoxcrashes every time I open any tab that contains a video of youtube, unless I'm in safe mode.

  It started today, actually a few hours ago. After you start speed up my new system after a short pause a few hours work, firefox immediately started crashing when I tried to restore the previous session. After many trial and error scenarios, I've identified the problem is it hangs more precisely at the opening of any tab that contains a video of youtube. It crashed at this account and trying to open google maps. Firefox update does not work. Reinstallation does not work. Running in Safe Mode resolves the problem, but I'm looking for a more permanent solution.

  Among recent report numbers:
  BP-c9be9125-1848-47F8-A997-3d68e2150705
  2015-07-05 21:24
  BP-400b742c-71dd-49A1-8B68-ac4c52150705
  2015-07-05 21:24
  BP-07234679-59f0-4851-9dd4-2825b2150705
  2015-07-05 21:18
  BP-0318d093-6705-4BAB-8dca-5d8832150705
  2015-07-05 21:10
  BP-89ed2984-0dcf-40D5-b83b-7101b2150705
  2015-07-05 21:09
  BP-caedccf9-8181-45a6-B667-8c23f2150705
  2015-07-05 21:07
  BP-7d90712d-3E32-419F-b184-f6e452150705

  OK, so while I was fixing my other problems it also fixes this issue.

  TL; DR There were some viruses on my PC that probably messed with system files, I got out my hard drive and completed an analysis using another computer, found about 60 of them. Then I upgraded to win 8.1 that solved the problem, probably by replace damaged system files.

• Any password is safe

  If I have my iMac password 2011 protected by passwords 8 characters including letters and numbers, letters and special characters is safe is my data if given to a company it Department without the password?  I don't have time to encrypt.  If the password is not enough, I'll have to make a secure erase and then install a clean OS.

  Without encryption, they would still be able to access your data to start up your Mac from a Linux live CD (if any distro provides support to format HFS +), to reset your user password or by plugging the hard drive of your iMac to another Mac through target disk Mode. If you are worried about your privacy the data, perform a secure erase and reinstall OS X (and don't forget to encrypt your disk with FileVault after getting your Mac repaired), but I don't think they have a look at your data

• slow RESOLVED with safe mode start

  Thunderbird taken 15-20 seconds to start.

  Also - this can be bound or not if I ask twice.

  When I try and delete an email get the message "the trash folder is full and cannot hold messages more. To make room for more messages, delete any old or unwanted mail and compact the folder. »
  What I can do, is move the message to the trash that works.
  I removed large numbers of emails to the trash, so there should be.

  Help

  15-20 seconds is not necessarily slow.

  It reproduces with Thunderbird safe mode and windows safe mode?

• Is it safe to delete the .dmp files in the program directory?

  I found a big enough .dmp file in my Firefox installation directory:
  c:\Program Files (x 86) \Mozilla Firefox\core.20130617.XXXXXX.XXXXX.XXXX.dmp
  It seems that the main file is labeled with a date stamp; the "X" are other digital numbers by hiding I am those out because I'm not sure they're relevant. Is it safe to remove this? Note that this file does not appear in topic: down.

  Delete it and restart the computer, make sure that firefox is not open as windows usually makes those when you get BSOD.

• Firefox displays only numbers and no text in some web sites. whereas the Internet shows explore them all to the same web site. What is the solution?

  When I click on a link in a web site, it is supposed to show the details on another page of the same website with text and numbers. But it only shows numbers. Why?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Alternatively, you can try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if it helps in the case where your security (firewall, antivirus) software causes this problem.

• 12.0 Firefox works with Norton Identity Safe?

  I recently updated to Firefox 12.0 and wanted to take advantage of Norton free offering their app Identity Safe. I am running Mac OSX 10.7.3 and when he took me to the mac app store, it loaded the extension in Firefox my Ribbon on top, but when I click it, it opens in Safari. It is not compatible with Firefox?

  The site of norton said that it is compatible with firefox https://identitysafe.norton.com/, however, I can't find which version it works with. I would try to contact norton to find the exact version numbers, with which it works.

• My iMac doesn't work that in safe mode, normal mode the screen layout is really weird. Help, please! :)

  Hi guys,.

  Since yesterday my iMac 27 inches of the end 2009 has acted weird. Text was not good more visible and popupscreen were empty, white or black. (do not know why they are uploaded in reverse)

  

  Then I tried a clean install. Screen was working again fine. Then formatted my drive and installed the new OSX.

  

  Download went fine, but when installing the pop-up screens were not visible.

  

  After a few random reboots on my side, it worked again.  Thus, installation...

  But... Now, I always have the same question. In safe mode, everything works fine, but in normal mode, the screen is *. Pop - up screens are blank/black or white, the numbers are mixed, etc. What it can be.

  I already installed it on an external HARD disk, reset the SMC and the PRAM, Test hardware (message only 1 failure: 4sns/1/40000000: TH00 - 9,000.) "But I think it's because I installed my SSD later, that's why I need to use a program like HDD control to control the fan).

  so... What can be? I've tried everything! If any of you guys could help me, I would like to do a happy dance ;-)

  You have a sensor error. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  Install El Capitan from scratch

  Restart the computer. Immediately after that the chime hold down the command and R until the Apple logo appears. When the Utility Menu appears:

  1. Select utility disc in the Menu Utility, then click the continue button.
  2. When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) in the list to one side.
  3. Click Delete in the main window of disk utility. A panel will fall.
  4. Define the type of Format Mac OS extended (journaled).
  5. Click on the apply button, then wait for the done button to activate and click on it.
  6. Quit disk utility and re-enter the Utility Menu.
  7. Select reinstall OS X and click on the continue button.

• 13 "Macbook Pro (mid-2012) starts only in safe mode.

  My macbook OS 10.11.4 recently close and wouldn't turn on after an electrical fault at the club I was DJing. The next morning, I disconnected the battery and plugged it back. When I turned on the PC, he gave the kernel panic and would only turn on in safe mode. I tried to go to recovery (command-R) mode, but that does nothing, when I start my computer.

  What happens here? How can I fix? Help, please

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Everything my daughter Pat on Firefox, it displays only the numbers, why? yboard types only

  Its keyboard functions normally everywhere outside of Firefox, including other browsers. In the Firefox browser, each keystroke releases only the numbers.

  I'm glad that you have solved the problem after trying safe mode.

  I note the software GuardedID does not seem to be designed to work with Firefox, at least on Windows Vista, by this faq, it is slow: http://www.guardedid.com/support_faq.aspx#EBCDA

  And other FAQ, on the same web page, to mention going out of sync and producing numbers when you type.

  No doubt the other thread you found was: numbers of types only Firefox instead of letters

  I wonder if a better solution to prevent the strikes may have an including installed AV security suite.

• Random numbers appearing in messages

  I am running Firefox 4.0.1 on 64-bit Windows 7 and every time that I post on a forum or send a Gmail account, it adds random numbers at the end of my entry. I tried using Chrome and it doesn't do this, what's the problem?

  You paste content or add a signature?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes