NX3100 and MD1200s with SSDS / SAS - Cachecade activation

Similar Questions

• RAID works using MD1200 r.620 and 6 GB/s SAS HBA?

  We have a r.620 with Dell SAS HBA already in which is attached to a tape of 124 t library.

  Just got a MD1200 and I plugged in the other port on the SAS HBA.  I can see the drives in Windows Disk Manager.  I can also see Open Manage, but there is no option to use RAID functions or create virtual discs.  Should there be?

  In fact, OpenManage said "Connector 0 (no RAID)" with regard to the SAS 6 GB/s HBA.   I searched online for drivers for this card that allow RAID and can not find.  Am, I watered?   How the RAID to work on the MD1200?

  Hello wardog25,

  For the MD1200 you use a PERC card because it will allow that you create a raid array. The SAS 6hba that is used for your 124 t isn't a raid card, so you will not be able to create a raid on this map. For a MD1200, we recommend that you use a PERC H800. Here is a link to the Guide of interoperability for the MD1200 & if you look at page 2, it lists the supported raid controllers. FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/PowerVault-md1200_Reference%20Guide_en-us.PDF

  Here is a link to buy a PERC H800 if you need.

  Please let us know if you have any other questions.

• RAID 1 support on Dell PowerEdge R730 with SSD and Perc H730 discs

  Hello. I am looking for some info on RAID usage with SSDS on our server:

  Dell PowerEdge R730
  1 GB for the PERC RAID controller cache internal H730
  200 GB Solid State Drive SAS mixed use MLC 12 Gbit/s, 2.5-inch
  OS Windows 2008 R2 (for now)

  We would like to know if it is supported to use two SSD drives in a RAID 1 configuration.

  What are the risks?
  Suggestions for others / the best solutions?
  How the controller or the handle of the Garbage collection, Trim and other techniques SSD SSD?
  Are there solutions in place for Wear leveling and how do they work?
  What are the methods of protection for the I/O failures for these SSD drives and / or PERC controllers?

  I hope you can answer (some of) the issue or point me in the right direction for some Dell documents on this subject.

  THX

  Arjan

  Hello Arjan

  Yes, you can use SSDS in RAID 1.

  The controller supports the TRIM and cancel orders mapping. SSD MLC are grade consumer SSD which will not have the life expectancy of SLC.

  http://i.Dell.com/sites/DocContent/shared-content/data-sheets/en/documents/Dell-PowerEdge-RAID-controller-H730.PDF

  http://www.Dell.com/learn/us/en/04/campaigns/Dell-RAID-controllers

  Thank you

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• 8 GB RAM with ssd and ram 12 GB without ssd cache cache

  We are looking to buy a laptop HP Envy 17 t j100 touchsmart for our son.  Which would be better:

  8 GB of RAM with SSD exceleration 24gig or 12 GB of ram without ssd cache memory?

  The cache of WSSD 24gig offers performance very similar to a full SSD drive for a much lower cost. I would buy the unit with the drive cache of the WSSD 24 concert and as little memory as they sell me and then increase the RAM me but 8 GB of RAM it's frankly more than many. In fact, it's probably better than 12 because there 2 identical modules allowing the functioning of memory dual channel. To summarize, the best option is clearly 8 GB RAm and the WSSD of 24 concert disk cache.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Suggested Drive setup for new h8 - 1360t with SSD and Raid-1 array

  All,

  I need some advice on how to configure the drives in my new system (waiting for construction and delivery, sigh).

  I bought a plan to replace the 1 TB drive with a new drive SSD that I start from and H8 - 1360T (Win 7 Pro).

  I also have a Raid-1 array in an old HP 4999 T system (Vista) disks Western Digital Caviar Black 2x2TB

  By looking at the motherboard plug appear to be only SATA0/1 6 GB/s, the others are 3GBPS.

  http://support.HP.com/us-en/document/c03132942

  I was a little surprised by that and need some advice.

  1. If I put the SSD on SATA0 or SATA1, the quickest way?

  2 or do I put the drives Raid-1 array and move the SSD to path of 3 Gbps?

  I think this last (option 2), but wanted to get your entry in case missed me something.

  Thank you

  Joel

  Ruette,

  Thanks for your comments. Looks like I should start with Option 1 as a better starting point.

  Joel

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?

  Hi vasilisp36877173 ,

  Please see these items:- Learn how to enable or disable Adobe applications

  Solve the problems of activation and deactivation of Adobe and error messages

  Let me know how it goes.

  Kind regards

  Christian

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit

• switching with SSD hard drive and install windows 8.1

  Hello

  I plan to buy a SSD Samsung 850 pro / evo (if you recommend to stick to a 840 please let me know)

  I have an alienware r4 bought in September 2014 I got with a normal 3 TB hard I now want to change just a storage disk and install a SSD drive with windows on it.

  I have reinstall windows 8.1 once before because of a problem before so im not new and understand the basic. But when even assume I don't know incase I missed a step, or something that should have been done.

  I also understand that the key of windows remains on computers that have a UEFI boot mode. If this correct?

  Are there any special steps I need to do to install an SSD

  I've also heard when to reinstall windows on your computer, that you need something with you mother of the Council which has not made when I first did a reinstall of windows on my computer. But it's a clean install of windows. I don't know what - this 'clean installing windows"and if it is not necessary to then please let me know.

  All I really want to do is to install windows on a card SSD to speed up performance without having to buy a new cd and would like to know if the pilot that were usually recommended for my computer will work as it should be, or do I install something different since im put an ssd card into my bench.

  Thank you

  The 850 is a great player, and if he is not a big price difference I recommend plus the 840.  Your plan to start SSD sounds good.  As long as you are using the Dell recovery disk, you won't need another Windows key.

  In some cases, you will need to opt for the SATA AHCI mode to do a clean install.  FYI, a clean install is the one who clears all data from the disk of destination.

  However, Samsung provides a free clone app (available on their website) that you can use to migrate your current installation to the new drive without all the trouble of a new facility.

• Cloning of SSD HD via active with Filevault disk utility

  Hi all

  I want to improve my HD to SSD.

  I intend on using disk utility for recovery mode to clone my HD to a Virgin SSD I bought.

  I must, however, Filevault enabled on my HD.

  It will be a problem when it comes to cloning the drive?

  Thank you

  Adam

  No, it shouldn't be a problem. It may be necessary first turn on FileVault and encrypt the SSD. But if there is no problem just turn off FileVault on the HARD drive.

• activate the AHCI mode on Envy Dv7 - 7398ca with SSD

  Year old i7 envy Dv7 - 7398ca notebook with SSD Samsung 840 Pro x 256.  Windows 8.1

  I've updated to the SSD shortly after I purchsed the laptop.

  No problem except the Samsung SSD Wizard software keeps tagging me as AHCI mode is disabled and must be enabled and I do not see it in the BIOS.

  Or I see anything that relates in the device as IDE Manager or other.

  It seems that the SSD is optimizing not itself based on the fact that it considers that AHCI is disabled.

  I apologize for the issue being this topic seems to be beaten to death over time, but I do not see what relates to this model or similar.

  Thanks for all the ideas.

  The system is set to ahci or RAID mode. You can tell that by opening the Device Manager and look at the storage controllers. Anyway it is optimized for SSDS and TRIM is activated. You can simply remove the program from Samsung and rest assured that your SSD is optimized.

• Can MD1000 and MD1200 coexist nicely on a PERC6e?

  Hi, I have a PE2950 with windows 2008r2 with a PERC6/e controller with two external ports.  One of the ports is attached to a MD1000 disk array.  I need more storage and I'm looking to get a MD1200.  Can I attach the external port on the PERC6e one Bay MD1200 discs?  Suggestions?

  Thank you!

  -sul.

  Sul26,

  Unfortunately, you wouldn't be able to put the two of those paintings on a Perc 6 controller. The reason is that the MD1200 is a SAS 6 GB table and the MD1000 is an array of 3 GB and the connectors are completely different. You need a Perc H800 controller for the MD1200.

  Please let me know if you have any other questions.

• Best configuration for new LR install on the machine with SSD & HDD

  Hello

  I have been in photography for years, but never got myself sorted to manage all the pictures I managed to take. So from Lightroom.

  I am a new machine with a fast 256 GB SSD, a 2 TB HARD drive, and a clean installation of LR. I also have a NAS I use for backups, but I won't probably LR actively talk to him because it is only accessible via the wireless network. My collection of photos is already in the order of 500 GB, in order to put all my photos on the SSD won't work.

  With this in mind, what is the best way to configure LR with this Setup to get the best performance out of it? The main purpose of the box will be for photography, so I don't mind too much if it uses most of the SSD.

  Tips are welcome. Thank you!

  Lightroom Catalog and spotted on SSD. photos on the HARD drive