OAM, iBook, Macbook pro and ipad air

Similar Questions

• Apple devices will not print not to 6700 Officejet, including the MacBook Pro and iPad

  I'm helping someone to implement their MacBook Pro and iPad to print wirelessly on their Officejet 6700. I have recently set them up with a new Apple Airport Extreme for their router. The printer connects to the wireless network. During the installation process of the printer is fine, that the MacBook can easily see the printer. The appropriate driver is installed. They also have a laptop Windows 7, which prints instanteously and has no problem whatsoever.

  When I try to print from the Mac, nothing prints. I open the print queue and it says 'Printing - a printer' and nothing ever comes of it. When you try to print from the iPad, you can see the printer and I select. However, after saying in print, said only dialog box: 'Connection to the printer' and he never - it just times out.

  Things I've tried:

  • Everything in this article which corresponds to Macs (10.8).
  • Reset the printing on Mac system.
  • Reset the printer to default settings.
  • The definition of the static IP address of the printer through the printer settings.
  • Setting the IP address of the printer via the Airport utility (after changing the automatic printer).
  • Restart the Mac after each attempt to remove the printer and adding again.
  • Using the official HP Officejet 6700 driver.
  • Use the Airprint driver.

  Other info:

  • Successfully, I can ping IP address of the printer from the MacBook Pro.
  • I can easily see the web page of configuration of the printer in the printer settings both by entering the IP address.
  • The printer is only about a month.
  • They bought this printer because the earlier had problems printing from all of their wireless devices. It is with a previous router in their ISP.

  At this point, I'm completely puzzled as to why the printer will print not these Apple devices. We have addressed all the issues that might be causing it: the network, the printer and the MacBook itself. I looked online and can't see any problem with people not being able to print to a wireless printer connected to an Airport Extreme. I saw some problems when the printer is connected via USB to an Airport Extreme, but this isn't our installation program.

  Any help would be greatly appreciated!

  Wow, I must admit, I had to do a lot of research to find something that you have not already tried! Thanks for your efforts so far @derick03 I accept the challenge of helping you get this to work.

  I have a vague feeling that the problem may have something to do with the router settings and to test my theory, I would like to try something for me.

  Please, open the preferences system, printing and scanning, click on the + symbol to add a printer, but this time, instead of the default tab, click the IP tab. Now let's add the printer using HP Jet Direct Protocol instead of the standard Hello.

  

  You can enter the IP address here, choose the HP Jet Direct and then select the printer driver, and then try to print. You will not be able to analyze this way, I just do this for diagnostic purposes. If you can print, it confirms the Hello Protocol is, and you will need to call Apple to make them turn on Hello, multicast and ensure that all the necessary ports are open.

  Not all wireless routers take load Hi or all features of Hello. Hello being the default method for the discovery of printers on a network, you must ensure that your wireless router supports Hello.

• Location Services does not-Macbook Pro and iPad 2

  I read through many questions is similar with location services. I recently moved from Shenyang in the northeast of China in Beihai in the South. The MacbookPro or my iPad can find my position. Before moving here, the two pieces of material worked well in Shenyang.

  The WiFi router I use is new (TP-Link TL-WR886N) and issued by the local network provider. There have been is several posts suggesting that some routers cannot pass on location data - possible to determine in the configuration of the router?

  I've been in System Preferences and China as my area with the "checkmark" automatic time zone setting zone will display the message "cannot determine the current location at this time." Location icon is not displayed in the menu bar. If I 'look' in location services watch poster cards tried to use location services.

  I have a Huawei smartphone with a version of the load maps and it works perfectly, to the extent of showing that my location is concerned; the downside is that the cards are in Chinese only, something with that I am fighting to familiarize themselves.

  Would it be possible to use the Huawei (Android) phone as a mobile hotspot that my IPad maps app could use? I had then matched but so far ' cards, does not pick up location data.

  Location services (including the automatic selection of the zone maps and 'Find my Mac') is based on a database of known locations with Wi - Fi access points. You do not have to be connected to a wireless network, but WiFi must be active and to reach one of these access points. Otherwise the machine will not located at all, or location will be wrong. Sometimes the location will be incorrect because the database contains incorrect data. What happens, for example, if you moved from one place to another and taken your Wi - Fi router with you. The router is still listed in the database, but in the old location.

  According to reports, if you connect to a Wi - Fi network with an iPhone, the location of the network will be sent to Apple and added to the database after a period of time. An iPhone, unlike other Apple devices, has built-in GPS satellite navigation and therefore can locate itself regardless of Wi - Fi. The phone will be charged to share diagnostic and information about using with Apple.

• OfficeJet Pro 8600 - Macbook Pro and Macbook Air does not print

  Products:

  • HP Officejet Pro 8600
  • MacBook Pro (Mac OS X, Version 10.7.5)
  • MacBook Air (OS X, Version 10.8.2)

  Question:

  • Why my Mac initially print fine, but now will not print?

  Full article:

  I have a wireless network in my house that consisted of a 30 MB cable internet, Netgear 900n, HP Officejet Pro 8600, 2 laptops from Dell with Windows 7, a laptop Lenovo with Windows 7 and Dell with Windows 7 trick, all printed matter very well.

  The HP Officejet 8600 was added to my network about 2 months ago.

  I added a Macbook Pro and Macbook Air about 3 weeks ago.  The two Macs printed fine for about a week.  Then suddenly they stop.  I spent about 2 hours on the phone with HP's Service, and finally, they said to my router.  So I called Netgear.  NETGEAR was useless!  They wanted me to accept fees for services before they would even discuss the issue.

  As a result of information provided by the HP support service, and because Netgear will not support their product, I quickly bought a new router - an Apple Airport Extreme.

  Macs will recognize the printer will print if connected via a USB cable, but do not print wirelessly on the Officejet Pro 8600.  The fine impression CPA.

  The frustration that is felt is made up by the fact that Macs printed very well with the Officejet Pro 8600 2 weeks and now the printer shows just "idle"... even with a new router. (see image below)

  Please help, thank you very much for all support.

  As a side note, the representative of the HP Service was very friendly and definitely tried to support the HP product, which is much more I can say about Netgear.

  Thank you

  

  Hello

  More likely a problem with Multicast, which Apple devices are relies on to communicate with the device through the network.

  First try unplugging the router for 30 seconds.

  Connect to the power supply and wait 2-3 minutes.

  Turn off the HP printer and turn it back on, then check all difference.

  If it persists, try to change the configuration of your router as follows

  Note: the settings below are not related with the HP product, I provide you with the steps as a best efforts and those based only on my own knowledge. You can try to change the settings of the router at your own risk:

  1. Open the router configuration page (you'll find listed as the default gateway by clicking the icon on the printer wireless, then print a network configuration report.
     
  2. Click the Advanced tab.
  3. Click the configuration option in the menu, and then click Setup WAN.
  4. Be sure to uncheck the box Disable IGMP proxy transmission and apply the changes.
  5. Click on the LAN configuration on the same Setup menu.
  6. Set the RIP RIP-2 Version and apply the changes.
  7. Restart your router and then check any change.

  I hope that you will find useful information, you can also use the guide to the user below for more information:

  http://www.downloads.NETGEAR.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.PDF

  Shlomi

• Apple TV 4th Gen Lag using airtime between the MacBook Pro and Apple TV

  I see a serious lag when playing videos or mirroring of my Pro(OS-Elcapitan) MacBook to Apple TV using Airplay. I've updated to the latest version of the software.

  Model - Apple TV 4th gen (last 32 GB)

  A question similar face and also I would like to know if there is a fix for this?

  AirPlay works very well with my iphone 6 and Ipad Air.

  Thank you.

  It will be because of the network

  If during testing of wifi Ethernet

  Make sure that no other activity occurs (other streaming, web browsing, backup network etc.)

  Test on another network

• MacBook pro 2012 vs air 2015

  Hello!

  This is my first time buying a macbook and I'm really confused

  I can't decide between 2015 macbook air (13 '') and the 2012 macbook pro (13')

  Air has 8 GB of ram, 128 flash storage, while the pro has 4 GB of ram and 500 GB hard drive

  Flash storage is faster but the air is not extensible I guess? And the pro has a much more powerful processor so I can not just take a decision!

  Thank you

  It is not clear that the MacBook Pro has better processor. Even if the speed of the processor is greater in the MacBook Pro, the processor in the MacBook AIr is a more modern and more powerful processor by GHz. In addition, Air has a better graphics processor.

  Youy can upgrade storage in the MacBook Air (but not memory)

  https://eShop.MacSales.com/shop/SSD/OWC/MacBook-Air/2013-2014-2015

• I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Hello world

  just bought a new macbook pro 2015 and I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Can someone please help me solve this problem?

  Thank you

  < re-titled by host >

  First check the steps to run the drop:

  Use AirDrop to send the contents of your Mac - Apple Support

  There are some work around to try airdrop work:

  1. Turn off Bluetooth on your Mac.
  2. Delete /Library/Preferences/com.apple.Bluetooth.plist
  3. Re-turn on Bluetooth

  You can find more info here:

  Transfer and AirDrop does not work in El Capitan

  If you do not see all of your device, it means that you are affected by the same problem, I have known, since the upgrade to OS X the air drop of Captain does not work.

• synchronization between the macbook pro and iphone works not

  My macbook pro and iPhone are not sync reminders or contacts. How wrong what?

  Hi cmatt3,

  I understand the reminders, and contacts are no longer sync between your iPhone and your MacBook Pro.  Here is an article I would recommend starting with this problem.

  Get help using iCloud Contacts, calendars, or reminders

  Please let us know if you aren't always sync after going through this article and thank you for visiting the communities of support from Apple.

  See you soon.

• I bought a new macbook Pro and I can't get my iMessage to work advice?

  I recently bought a macbook Pro and I'm not able to send messages through iMessage. He repeated to me that the person that I send a message to is not a user of iMessage. It was working and then all of a sudden just stopped. Any advice?

  It takes two to tango.

  If your recipient has difficulties of Internet connection, you will not be able to use iMessage, unless you also have a link iPhone to your Mac for SMS.

• How is it, I'm starting my MacBook pro and there is no window to enter my password?

  How is it, I'm starting my MacBook pro and there is no window to enter my password?

  Most likely because you have configured automatic log in users and groups.

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• Why my iTunes library sound randomly cut during the use of my new macbook pro and the old Bose speakers?

  Why my iTunes library sound randomly cut during playback on my new Macbook Pro and the old Bose speakers?

  The speakers connect through a USB port, instead of by means of the mini plug stereo audio output (headphone)?

  If it uses the standard audio out Jack, try to plug ordinary headphones instead.  The problem goes away or still occur?

• I have a macbook pro and airport Time capsule and want to delate all data on Time capsule. How this is done

  I have a macbook pro and airport Time capsule and want to delate all data on Time capsule. How this is done

  Open Airport utility, select the Time Capsule and then use the option erase to erase its contents.

  How to check or erase a disc AirPort Time Capsule - Apple Support

• I have Version 5.1.10 (6534.59.10 Safari on my macbook pro and I want to upgrade.) How to make to make it so my computer displays no update available?

  I have Version 5.1.10 (6534.59.10) of safari on my macbook pro and I want to update. How to make to make it so my computer displays no update available?

  Safari is a part of Mac OS X, and the only way to obtain a more recent version is upgraded to El Capitan.

  Lion and Mountain Lion can be bought at the Apple Store but 10.11.2 is a free update.