OAM - map multiple URLS for the same web application

Is OAM, posible to map multiple URLS to the same web application? When the user access to a different URL, it passes to the same application but set up with different strategy?

In this case, this is the scenario that describes ROISSAC - as he says OAM cannot protect the same resource with two different strategies.

Perhaps you could do this at the level of the network - if the two companies access the application through different proxy servers, you can use different identifiers to host for the two WebGates on proxy servers. This solution is easier to apply when there is a physical separation of users (for example, the internal/external users) rather than different users coming through the same path.

Kind regards
Colin

Tags: Fusion Middleware

Similar Questions

  • BlackBerry Smartphones why do I get multiple contacts for the same person

    Recently, when I add a new contact the 9700 creates several entries. When I delete these multiple inputs, then it leaves about 10 spaces. If I let multiple entries for the same person, the next person that I add only then indicates once

    Why they appear more than once?

    How can I delete multiple entries so they do not reappear when I create the following entry?

    Help, please

    Try a simple reboot and see if the empty entries remain.

    With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  • AcriveSync has created multiple numbers for the same contact

    I recently had my transferred to my new pre phone book and set up my corp email.

    A lot of my contacts are mixed up (last names starting with O come in T, and these records have multiple records for the same phone number.  How can I fix?

    Hey thanks - I thought about it.  Turns out there have a lof of contacts in my constituency of corp I do not even know (or use).  I went in a deleted them and now al is good.  Thank you!

  • Multiple aliases for the same subject?

    Hello world

    In OPM, is it possible to use several aliases for the same subject?

    I try to maintain the isomorphism of my wording of the policy.

    For example, my wording of the policy uses the words "person", hereinafter the "applicant" and "beneficiary" refers to the same person.

    I like to use "person", hereinafter the "applicant" and "the beneficiary" in my rules, but have the OPM recognize that whenever I write 'applicant' or 'the beneficiary', I'm actually referring to "the person".

    Is there a way to do this in OPM?

    An easy way to do this is to map through the underlying attributes in the rule itself.

    So you you would end up with rules such as (assuming that the entity is called 'the person'):

    the applicant is eligible if
  the applicant is aged over 18 years
     the person's age > 18

    It has not built based on synonym, as in most cases, the rules are more transparent without them.

    Published by: Davin Fifield, 12/07/2010 15:48

  • Multiple values for the same column in the columns of diffétent in the same row?

    Hi all
    I wonder how you can display different values for the same column in different columns on the same line. For example, using a CASE statement, I can:

    CASE WHEN CODE IN ('1 ', ' 3') THEN COUNT (ID) AS 'Y '.
    CASE WHEN CODE NOT IN ('1 ', am') THEN COUNT (ID) AS "N".

    Yes, that will produce two columns but will produce null values to empty and also two separate registers.


    Any ideas?

    Thank you

    Are you sure that this code works for you?

    Select ID
         ,CASE WHEN MODE_CODE IN ('1', '3') THEN COUNT( No) END as "Fulltime"
         ,CASE WHEN MODE_CODE NOT IN ('1', '3') THEN COUNT( No ) END  as "Other"
From table
group by ID

    I guess the code above fails because MODE_CODE is not in your group by?

    My suggestion would be to put the CASE in the COUNT:

    Select ID
         ,COUNT(CASE WHEN MODE_CODE IN ('1', '3') THEN No END) as "Fulltime"
         ,COUNT(CASE WHEN MODE_CODE NOT IN ('1', '3') THEN No END)  as "Other"
From table
group by ID

    CASE expressions return no. when the respective conditions are true and NULL otherwise.
    COUNTY will have non-null values.

  • My iTunes library creates multiple listings for the same artist (spelled identically)

    I use iTunes for years and thought I knew how to do everything that I need in there and solve any problem that I've run across.  But in the last 10-14 days, he began to behave strangely, and I'm completely stumped.  I don't know if it's a problem with a new version, if maybe my library file has become corrupted, or if I'm missing something obvious, but as someone who spends hours meticulously entering all the right data to my iTunes library, that drives me crazy.

    For some reason any recently, iTunes has begun to create several artist registrations for a handful of artists in my library (in only general I have a LOT of material for.)  Thus, for example, when I scroll my iTunes under 'Artists' library I noticed that Bruce Springsteen four times:

    Bruce Springsteen (12 albums, songs of 234)

    Bruce Springsteen (16 albums, 201 songs)

    Bruce Springsteen (2 albums, 22 songs)

    Bruce Springsteen (2 albums, 41 song)

    It would be only incredibly annoying, but it actually divides some albums through multiple "artists" so that securities 1,4,6,7 will be an artist under a listing and the rest on another.

    I created a smart playlist with the criteria ' artist contains 'bruce' "selected all titles of springsteen and changed the artist on EACH of them to ensure that there is no variation in spelling or spacing.  It does not exist. (Springsteen is the worst offender, having four entries of artist, but there's another 3-4 artists who do the same thing)

    It drives me crazy because there seems to be no rhyme or reason to it, and it is debilitating to my efforts to clean and organize my library.  I try to avoid manually recharge all my music in iTunes I have dozens of playlists I've spent hours creating and would not have to start over on those.

    Any suggestions?

    You have already tried the first method, so try the other here:

    Fix split Album or artist listings in iTunes

  • I want to open several tabs for the same Web site. 9.0 will allow me to do this?

    I keep getting pop up windows to update to Firefox 9.0 because its faster etc. I look round and he tells me he asks me if I already have one open. I WANT THE SAME SITE OPENED IN SEVERAL TABS according to what I'm working on. Is it still possible with the updated version. IF this isn't the case, I don't want it, but none of the FAQ questions even thought my question.

    When you enter a site in the URL/address bar and see the section "Switch to tab" in the drop-down menu, you can

    • use ALT + ENTER to open the new tab (duplicate) anyway
    • Use CTRL (CMD on OSX) + left click on the original tab and drag until you see an arrow under the point of rupture between the two tabs upward, then release the left button, then release the CTRL/CMD key to obtain a duplicate of the tab with all of its history (front/rear)
    • Press the SHIFT key while an entry in the drop-down list is highlighted to disable 'Switch to the tab' and see the URL.
    • Use the right arrow to select an element marked as switch to tab in the menu drop-down and copy the URL in the address bar.
    • Open the URL in the current tab by using shift + enter on the highlighted entry.
    • ALT + Enter open the URL highlighted in a new tab.
    • Shift + enter opens the URL highlighted in the current tab.
    • Cursor right copies the URL highlighted in the address bar where you want to change it.

    You can install this add-on to completely disable "switch to tab": https://addons.Mozilla.org/en-us/Firefox/addon/switch-to-tab-no-more/

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • How to place multiple orders for the same address on the photos?

    Hello!

    I created several books on Photos and I would like to get printed and shipped to my address.

    Unfortunately, it seems that it is only possible to place an order at the announcement of time (a book both in my case) so pay the shipping costs for each order/book.

    Am I missing something here?

    Thank you in advance for your help!

    You can combine only multiples of the same item in an order.  If you have created several books, you will need to pay the shipping costs for each of them separately.

  • DAQmx: Outputs digital multiple tasks for the same card using the on-board clock

    I have a PCI - 6259 DAQ I'm programming with DAQmx. I want to create two tasks of digital output on the same card. A single task using on-board clock, continuous samples. The other task uses an onboard clock, finished samples and an external trigger with trigger Start.Retriggerable property = TRUE. Is this possible with my hardware and DAQmx? There will be a conflict if two tasks use the same clock source?

    This is not possible, you can have only one task timed materially by device.

    Best regards

  • Plans of multiple executions for the same SQL statement

    Dear experts,

    awrsqrpt. SQL shows several plans for a single SQL statement executions. How is it possible that a single SQL statement will be several Plans of executions within the AWR report.

    Here is the output of the awrsqrpt for your reference.

    WORKLOAD REPOSITORY SQL Report

Snapshot Period Summary

DB Name         DB Id    Instance     Inst Num Release     RAC Host
------------ ----------- ------------ -------- ----------- --- ------------
TESTDB          2157605839 TESTDB1               1 10.2.0.3.0  YES testhost1

              Snap Id      Snap Time      Sessions Curs/Sess
            --------- ------------------- -------- ---------
Begin Snap:     32541 11-Oct-08 21:00:13       248     141.1
  End Snap:     32542 11-Oct-08 21:15:06       245     143.4
   Elapsed:               14.88 (mins)
   DB Time:               12.18 (mins)

SQL Summary                            DB/Inst: TESTDB/TESTDB1  Snaps: 32541-32542

                Elapsed
   SQL Id      Time (ms)
------------- ----------
51szt7b736bmg     25,131
Module: SQL*Plus
UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(ACCT_DR_BAL,
0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND TEST_ACC_NB = ACCT_ACC_NB(+)) WHERE
 TEST_BATCH_DT = (:B1 )

          -------------------------------------------------------------

SQL ID: 51szt7b736bmg                  DB/Inst: TESTDB/TESTDB1  Snaps: 32541-32542
-> 1st Capture and Last Capture Snap IDs
   refer to Snapshot IDs witin the snapshot range
-> UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(AC...

    Plan Hash           Total Elapsed                 1st Capture   Last Capture
#   Value                    Time(ms)    Executions       Snap ID        Snap ID
--- ---------------- ---------------- ------------- ------------- --------------
1   2960830398                 25,131             1         32542          32542
2   3834848140                      0             0         32542          32542
          -------------------------------------------------------------


Plan 1(PHV: 2960830398)
-----------------------

Plan Statistics                        DB/Inst: TESTDB/TESTDB1  Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
   into the Total Database Time multiplied by 100

Stat Name                                Statement   Per Execution % Snap
---------------------------------------- ---------- -------------- -------
Elapsed Time (ms)                            25,131       25,130.7     3.4
CPU Time (ms)                                23,270       23,270.2     3.9
Executions                                        1            N/A     N/A
Buffer Gets                               2,626,166    2,626,166.0    14.6
Disk Reads                                      305          305.0     0.3
Parse Calls                                       1            1.0     0.0
Rows                                        371,735      371,735.0     N/A
User I/O Wait Time (ms)                         564            N/A     N/A
Cluster Wait Time (ms)                            0            N/A     N/A
Application Wait Time (ms)                        0            N/A     N/A
Concurrency Wait Time (ms)                        0            N/A     N/A
Invalidations                                     0            N/A     N/A
Version Count                                     2            N/A     N/A
Sharable Mem(KB)                                 26            N/A     N/A
          -------------------------------------------------------------

Execution Plan
------------------------------------------------------------------------------------------------
| Id  | Operation                    | Name            | Rows  | Bytes | Cost (%CPU)| Time     |
------------------------------------------------------------------------------------------------
|   0 | UPDATE STATEMENT             |                 |       |       |  1110 (100)|          |
|   1 |  UPDATE                      | TEST            |       |       |            |          |
|   2 |   TABLE ACCESS FULL          | TEST            |   116K|  2740K|  1110   (2)| 00:00:14 |
|   3 |   TABLE ACCESS BY INDEX ROWID| ACCT            |     1 |    26 |     5   (0)| 00:00:01 |
|   4 |    INDEX RANGE SCAN          | ACCT_DT_ACC_IDX |     1 |       |     4   (0)| 00:00:01 |
------------------------------------------------------------------------------------------------




Plan 2(PHV: 3834848140)
-----------------------

Plan Statistics                        DB/Inst: TESTDB/TESTDB1  Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
   into the Total Database Time multiplied by 100

Stat Name                                Statement   Per Execution % Snap
---------------------------------------- ---------- -------------- -------
Elapsed Time (ms)                                 0            N/A     0.0
CPU Time (ms)                                     0            N/A     0.0
Executions                                        0            N/A     N/A
Buffer Gets                                       0            N/A     0.0
Disk Reads                                        0            N/A     0.0
Parse Calls                                       0            N/A     0.0
Rows                                              0            N/A     N/A
User I/O Wait Time (ms)                           0            N/A     N/A
Cluster Wait Time (ms)                            0            N/A     N/A
Application Wait Time (ms)                        0            N/A     N/A
Concurrency Wait Time (ms)                        0            N/A     N/A
Invalidations                                     0            N/A     N/A
Version Count                                     2            N/A     N/A
Sharable Mem(KB)                                 26            N/A     N/A
          -------------------------------------------------------------

Execution Plan
---------------------------------------------------------------------------------------------
| Id  | Operation                    | Name         | Rows  | Bytes | Cost (%CPU)| Time     |
---------------------------------------------------------------------------------------------
|   0 | UPDATE STATEMENT             |              |       |       |     2 (100)|          |
|   1 |  UPDATE                      | TEST         |       |       |            |          |
|   2 |   TABLE ACCESS BY INDEX ROWID| TEST         |     1 |    28 |     2   (0)| 00:00:01 |
|   3 |    INDEX RANGE SCAN          | TEST_DT_IND  |     1 |       |     1   (0)| 00:00:01 |
|   4 |   TABLE ACCESS BY INDEX ROWID| ACCT         |     1 |    26 |     4   (0)| 00:00:01 |
|   5 |    INDEX RANGE SCAN          | INDX_ACCT_DT |     1 |       |     3   (0)| 00:00:01 |
---------------------------------------------------------------------------------------------



Full SQL Text

SQL ID       SQL Text
------------ -----------------------------------------------------------------
51szt7b736bm UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL, 0) +
              NVL(ACCT_DR_BAL, 0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND PB
             RN_ACC_NB = ACCT_ACC_NB(+)) WHERE TEST_BATCH_DT = (:B1 )
    Your contribution is very much appreciated.

    Thank you for taking your time to answer my question.


    Concerning

    Oracle Lover3 wrote:
    How will I know (from Plan 1 and Plan 2) whose execution plan chose for the current run?

    Since you're already on 10.2, you can identify the actual execution plan by checking in V$ SESSION SQL_ID and SQL_CHILD_NUMBER column. This can be used to identify the plan in V$ SQL_PLAN (columns SQL_ID and CHILD_NUMBER) and in 10g, you can use the convenient DBMS_XPLAN. Function DISPLAY_CURSOR for the information of the real plan using these two parameters.

    Kind regards
    Randolf

    Oracle related blog stuff:
    http://Oracle-Randolf.blogspot.com/

    SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676 /.
    http://sourceforge.NET/projects/SQLT-pp/

  • How to access files in the same web application projects?

    Using JDeveloper Studio 11.1.1.1.0

    I create a web application that uses the Model-View-Controller design pattern. Model represents the data, the schema represents the data display and controller is control...

    In my application, I created two projects: EJBModel and UserInterface. EJBModel contains the aspect of the model, so it has objects and entity beans to access/manipulate data. The UserInterface project stores the web interface - jsps for most. In the UserInterface project, I need a managed bean that calls methods of the beans created in the EJBModel project. I can do this using the @EJB annotation and the creation of an instance of the class, but given that the files are in separate projects that cannot meet and JDeveloper displays an error because it cannot find the necessary file. It is recommended to create two projects that he keeps the two separate elements.

    So I wanted to know the best way to access the files stored in separated in the same application projects. Is there a way to pack them together?

    Thank you...

    In the UI project, go to properties-> project dependencies and add a dependency on the model project.
    This way JDeveloper will know what classes you are referencing.

  • FDMEE - different target for the same target application options

    Hi FDMEE - Experts.

    We run FDMEE 11.1.2.4 to load data to a single application of HFM and are faced with a special request of the company.

    We have a place to load their data to HFM, even if the report of Validation of Intersection is pointing to one or more errors.

    With FDMEE we just copied the TargetAdapter (changed the parameters of Validation of the Intersection) and used for the precise location of the adapter copied with the changed settings. (its perfect it to load the remaining data of HFM and us shows in the log the errormsg).

    As it is not possibel in FDMEE to create a second connection TargetApplication to a HFM Application, which is already used, I want to solve this problem by an EventScript which changes the Intersection 'check' for the specific location.

    Could someone give me a hint on what the correct functioning, I need to call in the script to change the 'YES' to a 'NO '? And if the event: "BefProcMap" would be the right to use?

    I want to make it as easy as possibel.

    If str (fdmContext ["LOCNAME"]) = "LOCATION_WHO_DOES_NOT_NEED_INTERSECTIONCHECK":

    XXXXXXXXXXXXXXXXX

    Thank you all

    In 11.1.2.4 make you to level loading data rule. You now have the possibility of substitution/specify the options of the target State of loading data. If you don't even have somewhere else, just 2 different DLRs to one place - who has the option of validation enabled intersection and the other has not.

  • Problem: 2 different URLS for the same home page

    Hello

    I'm having a problem with the canonization, where my homepage has two different URLS.  From my understanding, it's diluting my SEO efforts.  I read that the right way to fix is to do a 301 redirect, however I do not know how to do this.

    Examples:

    Addresses of Web sites:

    http://www.liveimagegreenscreen.com/index.html

    http://www.liveimagegreenscreen.com/

    Article canonization:

    http://www.SEOmoz.org/learn-SEO/canonicalization

    Hi pharcydeabc,

    Thank you for your patience. If you're hosting with a third party, you'll need to create or change the code in the .htaccess file that is located on your web hosting server. It is beyond the scope of Muse. However, here is some information on how to create a 301 redirect:

    http://www.beyondink.com/HOWTOs/301-redirect.php

    http://www.internetmarketingninjas.com/blog/search-engine-optimization/301-redirects

    This can be a confusing process and, if done correctly, can cause problems with your accommodation. I recommend contacting your hosting provider of support and assistance to the creation/modification of your .htaccess file.

    If your site is hosted by Business Catalyst, here are the instructions of the Colombia-British team on how to set permanent redirects in the administration of BC:

    http://helpx.Adobe.com/business-catalyst/partner/redirect-page-URLs.html

    Best regards

    Corey

    Post edited by: Corey@Adobe (added link to BC)

  • When I add a bookmark, I get hundreds of multiple entries for the same bookmark in the recently added bookmarks folder and the bookmark tab. Difficulty?

    Adding a results of bookmark in 100's of entries for this bookmark on the Bookmarks tab and in the recently added bookmarks folder. The only way to remove them is to click and delete each separate entry? Any idea what is happening or how to fix it? Thank you.

    Start Firefox in Safe Mode {web link}
    While you are in safe mode;

    Type of topic: preferences #advanced< enter > in the address bar.

    Under Advanced, select General.
    Find and stop using hardware acceleration.

    Search web sites secure. Are there problems?

  • Multiple terms for the same key.

    Is there a way you can have several condition (same type of the report).

    I have the button I want to hide at different stages.

    For example I would like to have a button (Submit) that will be visible when

    Status = project
    State value of Type of element in the Expression 1 = Expression 2
    P9_X_STATUS
    Project

    and when also when userRole = author

    State value of Type of element in the Expression 1 = Expression 2
    P9_X_USER_ROLE
    Author

    Robert

    Hi Robert,.

    You can use a SQL query is to treat several conditions:

    SELECT 1
FROM DUAL
WHERE :P9_X_STATUS = 'Draft'
AND :P9_X_USER_ROLE = 'Author'

    This returns a record only if two conditions are met - if either a fake, then no records are returned, and the condition is not met, so that the button is not displayed

    Andy

Maybe you are looking for