OBIEE in SQL Server

Similar Questions

• OBIEE 10.1.3.4.0 is compatible with MS SQL Server 2008?

  Hi all
  
  We are currently working on version 10.1.3.4.0 OBIEE and need to connect to MS SQL Server 2008 to perform the modeling process.
  
  So my question is who is compatible with the 10.13.4.0 OBIEE MS SQL Server 2008? Is this fine if go us forward with modeling?
  
  Please answer as soon as POSSIBLE, because it is very critical for us. and if any document would be very useful
  
  Kind regards
  Pierre Collin

  Hi David,

  You can find the OBIEE documentation here: http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_booklist.htm

  Compatibility is given the [system requirements and supported platforms | http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10417.pdf] doc

  Certification for SQL Server 2008 came with 10.1.3.4.1, you can have problems with 10.1.3.4.0

• OBIEE 10 G can connect to a SQL Server database (2005)?

  We have Oracle BI already running. We also have a SQL Server database running. Now, there is requirement that requires to connect to SQL Server and directly send some books SQL on SQL Server and retrieve the result and display it in the answers. I know that the normal procedure should be set ETL to load data from the SQL Server in OBIEE and from there, the report can be built. So I'm not sure it's doable?

  Do the same thing using the online mode. so that you can add a connection pool to the RPD, which is located within the BI server.

• Select data source in physical in OBIEE 11 G mode when you use sql server

  Hello
  
  I did my physical review against a SQL Server 2008 R2 server. The list looks up to 2005. I select 2005 in this case? According to the guidelines of the image: http://i.imgur.com/3H7MO.png
  
  See you soon.
  
  I use OBIEE 11 G Windows 32-bit.

  Hello

  Yes it is possible. You can select such as ODBC or SQL 2005 basic can also
  I hope that your version less than obiee11.1.1.5.0, version 11.1.1.1.6.0 and above has updated SQL 2008 in the data source selection list.

  refer,
  http://imgur.com/JSYoL

  Thank you
  Deva

• SSO Microsoft Application, SQL Server 2005 & OBIEE 11g

  Dear gurus,
  
  None known how activate SSO(Single Sign On) in OBIEE 11 g, to the East of the platform application microsoft instead of Oracle EBS and the SQL server 2005 data source?
  I'm new on this.
  
  
  Any help will be appreciated
  
  
  Concerning
  
  JOE

  Hello

  Try link below

  http://sranka.WordPress.com/2008/06/06/enabling-SSO-authentication-for-OBIEE/
  http://Gellio.WordPress.com/2009/10/23/enabling-Oracle-single-sign-on-Osso-with-OBIEE/
  OBIEE, OAS, OID or SSO integration
  http://sranka.WordPress.com/2008/06/06/enabling-SSO-authentication-for-OBIEE/
  http://www.addidici.com/blog/?p=8
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyDeploy/AnyDeploySSO3.html

  See the security here, in

  http://download.Oracle.com/docs/CD/E21764_01/bi.1111/e10543/SSO.htm#CEGJJFED

  Hope this helps

  Thank you
  Satya

• Integration of SQL Server 2005 with OBIEE 11g

  Dear gurus,
  
  Is there documentation on how to use SQL Server 2005 as datasource combined with OBIEE 11 g?
  Clear steps with pictures will be very useful.
  
  Thank you very much
  
  Concerning
  
  JOE

  Hello

  Please see this link.

  http://rnm1978.WordPress.com/2009/08/21/querying-SQL-Server-from-OBIEE-running-on-UNIX/

  Re: How to connect Linux OBIEE repository to SQL Server 2005 database

  Hope this helps

  Thank you
  Satya

• OBIEE retro-design to go from SQL Server to a data warehouse

  Hello
  I am new to modeling for data warehouses. We currently have an OBIEE environment put in place where the source of data was the transactional tables in SQL Server. The SQL Server data should be moved to a warehouse of data non-Oracle and I need to produce a logical data model for the people of my company warehouse. Unfortunately, the SQL Server data is never copied, so I based the model from the logical and physical of OBIEE diagram/relationships.
  My question is in what concerns the validity of the following relationships to be used in a data warehouse based on what is currently in OBIEE. When I have this model through Erwin, I wonder if I'm away from base in relationships (modeling, don't not personal):
  
  Dimension 1 has a 0:M with axis 2
  Dimension 1 has a 0:M with 3 Dimesion
  Dimension 2 has a 0:M with 3 Dimension
  Dimension 2 and 3 Dimension have a 0:M with 1 fact
  
  Through the use of pseudonyms and others, this works in OBIEE. Will this work as a model of data in a data warehouse environment?
  
  Thank you!

  I think that you started with the wrong foot. I suggest search you Google 'kimball methodology' and have a reading a few articles. Your DWH model should not be based on your transactional tables. You should ask your business users 'questions' they want to answer in the DWH. Then model your DWH base on it. You cannot model a DWH without knowing what questions you must answer. For example, if your users want to know the sales per day and per branch will be a fact of sales with a sales volume measure joining two dimension of branch and time dimensions. The number of facts will depend on the questions you need to answer, the data type, and the granularity of them.

• BI Publisher cannot connect to SQL Server.

  Hello

  We try to create a BI Publisher connection to the SQL Server database. However, we receive a message "could not establish a connection. We tried google to find a solution.

  We don't know what the problem is. We can ping the SQL Server computer from the server of BI applications.

  Apparently, it seems that the required JDBC driver files are missing. We use OBIEE version 11.1.1.3.0 and 11.1.1.6.0. How do we know if we have the right JDBC driver file? And also, where we must copy the JDBC driver/jar files to.

  Any help will be much appreciated.

  Thank you and best regards,

  Maury.

  Yes 'Database driver class' is 'hyperion.jdbc.sqlserver.SQLServerDriver' is correct

  and your connection string should like this "jdbc:hyperion:sqlserver://mysqlservername:1433; DatabaseName = master.

  username = his

  password = sa_password

  If does not work, you can try 'other' in the type of driver, and the classpath of weblogic set to connect to SQL Server

  doy, you know what should you do?

• OBIEE and SQL

  All,

  Asked me to find the answer to the question. We are currently looking at a solution, but to find out if we have the stored in SQL Server 2008 R2, could we sit a repository Oracle and OBIEE 11 g in addition to this or do we need to either:

  a. transfer all data in an Oracle database to the reportistory to create

  b. spend a lot of money by creating a link that would allow the two talk

  If b is possible, would be the cost in terms of time, resources etc. exceed the cost of the option has.

  Sorry if this really stupid question, but I have asked us to know before you go in a way of solution. Better than its threshold now then farther on the road when the impact of the problem.

  Thank you

  Hello

  OBIEE able to connect to SQL Server 2008. IF the RPD can be up on top of that.

  Kind regards

  Rémy

• filter columns nvarchar - SQL server

  Hello
  I use OBIEE 10.1.3.4.2 and I have the problem with filtering of data from SQL server 2008. I use ODBC connection to the SQL server data access. I can see the results of my questions without any problem.
  
  But I have the problem with filtering.
  
  My answer use these columns:
  
  ID (varchar (36))
  Code (nvarchar (256))
  Name (nvarchar (256))
  HappenedOn (date)
  
  Please look on this screenshost:
  
  http://img59.imageshack.us/img59/5242/obieenvarcharcolumn.jpg
  Screenshot
  
  I have problem when I want to use the filter on the column Code and use non-English characters. Specifically Czech characters in the windows1250 code page. With this filter, I can I see "no results". But select generated works in Microsoft SQL Server Management Studio.
  
  I think that there is a problem with the ODBC resources or configuration BI, but I can't find the reason for this behavior.
  I do a specific configuration to use the NVARCHAR columns? Specify an encoding etc...
  
  Thank you

  Hi Cardel,

  Can you try this in your physical layer, double click on the connection pool-> Goto Writeback tab-> check the box: type of Unicode data.
  Click OK and check after Check - in Changes.Now all run them again the control report for the issue.

  Rgds,
  DpKa

• Update, Qosmio F - SQL Server 2005 Express Edition Service Pack 3 fails

  This update continues to be marked by the automatic update from microsoft, but fails to update no matter how many times I try to treat it... Why is it so?

  What is the aim of SQL servers and do I need? Deleting it will solve my problem?

  Hello

  Check out this page of MS:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3181842a-4090-4431-ACDD-9a1c832e65a6&displaylang=en

  You can download here the full Microsoft SQL Server 2005 Express Edition Service Pack 3.
  But please check the Instructions on the page of Ms.
  You will need Microsoft .NET Framework 2.0 or later and you need to follow some other measures that are mentioned on the Web site.

  See you soon

• Problem to install SQL Server 2005

  Hi friends,
  I have Toshiba computer and I had a problem installing SQL Server 2005 when we do the connectivity to the server, it is not work properly.

  As much I know Toshiba doesn t load of SQL Server.

  By the way: Toshiba has a lot of computers. One you have?

• Cannot install SQL server 2000 and 2005 on Satellite A205-s5831

  Hello everyone.
  I need some help from you all.
  I have Toshiba Satellite A205-S5831 laptop.
  Its Windows Vista Edition Have Home Premium.

  And I am unable to install SQL server 2000 and 2005.
  I also cannot install Windows XP SP2.

  SATA driver problem.

  Please help me...!

  Answer me

  Hello

  Windows XP needs a SATA driver if you want to install on the laptop with SATA HDD controller.
  Driver SATA can be found in the Intel Storage Manager.

  I advise to use nLite program to include a SATA driver in the new Windows XP CD, then boot from the XP CD created new.
  You will find details of the nLite:
  http://www.nliteos.com/

  With regard to the problem of Server SQL;
  You may be able to install in Windows XP. There may be a compatibility problem between Vista and SQL Server software

• Portege R500/Vista - Why SQL Server installed?

  Why the Portégé R500 (with Vista) come with Microsoft SQL Server 2005 pre-installed?

  What is an idea of Toshiba or something to do with Vista?

  Wire in Nice. ;)

  Good luck with your Portege R500.

• Import Access DB to SQL Server

  I'm trying to set up a SQL Server database.

  Currently I use Access and my own plan which is very close to the "generic" Recordset

  I tried several things.

  * Band my .mdb so that it contains only the tables but no data.

  * Import to SQL Server.

  * Database .mdb complete, including the import data.

  My tablenames in SQL Server always gets the prefix 'dbo '. This means that they use a schema "dbo" - right?

  Can I export my plan (.ini) TestStand, , but how do I get that in SQL-SERVER?

  Currently, I get the error below: (what is the result of not having the correct implement schema?)

  An error occurred calling "LogMultipleResults" in "ITSDBLog" of "ZNIUGOL TestStand database logging"

  An error has occurred by executing a statement.

  Statement: UUT_RESULT.

  Description: Cannot insert the value NULL in the column 'ID', table 'PTA_DR2_COMMON.dbo.UUT_RESULT '; column does not allow NULL values. INSERTION fails.

  Number:-2147217873

  NativeError: 515

  SQLState: 23000

  Reported by: Microsoft SQL Server Native Client 11.0Description: the statement has been terminated.

  Number:-2147217873

  NativeError: 3621

  SQLState: 01000

  Reported by: Microsoft SQL Server Native Client 11.0Description: operation errors generated several OLE DB steps. Check each OLE DB status value, if available. No work has been done.

  Number:-2147217887

  NativeError: 0

  SQLState: 01000

  Reported by: Microsoft SQL Server Native Client 11.0

  Under the 'data link property"in TestStand I've set up to use a"specific name and user password"which is implemented in SQL Server.

  I choose to save the "Password."

  Test the connection is OK.

  If I close the window, but right after the reopening, the password properties are gone... which means it is not saved!   Why?

  If I use NT integrated security, access to the database works.

  I found a 'Solution' by exporting each table access rather than import it on SQL Server.

  Now, it seems to be OK