obiee11.1.1.7g installation of evolution, second managed server not able to boot

Similar Questions

• I accidentally deleted iPhotos after installation of El Capitan and were not able to download or reinstall.

  I accidentally deleted the iPhoto app on my new mac after installation of El Capitan and are not available for download, except the updates, which obviously doesn't work. How can I get that back?

  You can probably not - most likely, you will need to switch to Photos (what would happen sooner or later anyway)

  Have you looked under purchases in the app store?  Can't update iPhoto because it is not available in the App Store

  If it is not there you can try reinstalling iPhoto 11 of the original source and the upgrade to 9.6.1 but I doubt it will work

  Or you can try to restore your backup from just before you shape did this error

  Good luck

  LN

• vCloud vCAC Automation unit distributed Installation Architecture Center second device does not record services

  I work at the vCAC 6.0 installation in a distributed architecture for a production environment.  I have deployed the device of the identity, configuration Netscaler for balancing the load, configure external postgreSQL, followed vCloud Automation Center Documentation until you restart the vcac-server the vcac appliance second service and it never starts or registers the services on the second device vcac.

  The first aircraft arrives as it should and works through the just right load balancer.  After restarting the service vcac-server and 20 minute wait I can't to the second application directly bypassing the load balancer to access the page of the shell-ui-app.  Connect to the console of the second application I tail'ed the output of /var/log/vcac/catalina.out and used netstat - year to view the ports used.  Port 443 just never came up.

  I have filed a ticket with support but thought someone might have fallen on this and can help in the meantime.

  The problem has been resolved with the GA vCAC 6.1 version and using the HA tab for additional devices.

• Not able to boot up normally after installation of Service Pack 3.

  Original title: I am trying to download Windowes XP SP3.

  I am trying to download Windowes XP SP3. After installation and reboot my computer only allows me to start in safe mode. It seems that I don't suystem for SP3. Also, in safe mode, it says I can solve problems by going to the Control Panel, but does not give any other direction on what to fix.

  Hi TimWaldal,

  What is the exact error message that you receive in safe mode?

  It seems that Service Pack 3 is not installed correctly.

  (a) that you try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

  Please post back and we do know.

• My installation of Windows 7 Ultimate is not able to activate. It's real MS

  The software installed and trying to activate every time I get 0xC004C003 error code.  I'm options to re buy a new set of keys or retype the series that I did without result. Even tried phone activation with no luck. Thanks for any viable solution to this problem.

  Activation error: 0XC004E003 http://support.microsoft.com/kb/938450

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Two monitors / installation of a second display driver

  Hello

  I'm not able to get my two monitors running. I just performed a new installation; These monitors were fine with my other drive hard and windows.

  I checked my display drivers in Device Manager and there is only one pilot listed under display cards

  ATI Radeon HD 3800 series

  I know it is supposed to be two of these listed, but there is not... Windows does not detect my secondary monitor... two of these monitors are the same and both connected by a DVI input on the graphics card.

  I've uninstalled and reinstalled the drivers several times with no progress.

  I have excluded sons and defective connectors by switching autour and he always seems to be the same screen that works on its own...

  Any ideas would be appreciated.

  Thank you

  Arthur

  Good so I solved the problem...

  Apparently, all I had to do was the eve of my machine and cut off from all power using the power bar for a few seconds until all residual power is gone, turn back on my machine and Voila!

  An easy solution for this aggravating problem...

• Download Lightroom without installation on a second laptop my cd

  Download Lightroom without installation on a second laptop my cd

  Photoshop Lightroom

  You can get downloads to Lightroom for Windows or Mac from the following link as well as the system requirements.

  To download click here to start

• My second drive is not recognized for the installation

  When I try to install CS5 on my computer the second disc is not recognized. I tried on another computer and it is still not recognized. Is there an another install if I can check the serial number?

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

  Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

  I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

  Thank you Paul,.

  That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

  

  Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

  Thanks again,

  Eugene

• SIL flashes once every 6 seconds mac does not start

  My mac book pro end 2011 running El capitan (not sure what version of El Captain) short charges a month ago, when my charger is broken... somewhere, I'm the charger at work now (after a month, it was completely empty until about 2-3 days ago), he would not start I can not reset nvram or smc as the mac won't even turn on.

  If without connecting the charger I press the power button or indicator, nothing happens, but if I connect the charger, then press the indictator of costs it market showing no charge as Whiteout pressing me the button power mac continues to try to start the ISL flashes on the left, the fan turns, there is a noise coming from the hard drive the screen is completely black and this is repeated every 6-7 seconds...

  I thought that it was because the battery was completely discharged so I let it charge for 4 hours the first day then for about 6 to 7 hours the second day then topic 2-3 hours on the third day it was yesterday, so I read a tutorial or something online that said to hold comand, shift, option, r, p and the power button at the same time for 10 seconds and then let it, and press the power button Yet once I did this, but nothing happened, it was in the same loop, then I repeated the process without holding shift it wasn't too then I held command, t nothing happens so in desperation I held the power button for about 10 seconds, the fan has started a lot of dust exploded and fun trotted it started normally then I ran a virus scan and a control of being using bit defender, nothing was wrong with the results of bit Defender, I will attach be check the results soon... all the while there was an X mark on the indicator of battery... then I restarted the mac and he returned to its previous state, I've tried everything to run back removed the disc hard cords battery cables and cd drive leads to the Board and tried to boot with various combinations of even (what I did the day I got the charger is working IE the first day, but two trials failed to produce results and my mac is back on the loop and I'm sick using a phone to post my question) , I am not able display the screen shots I ttok the activity monitor and the edition of text file that I saved with being check the results I copied both of them on my phone so that I am able to provide using any other method, I would really appreciate if someone can help me

  I found a way to solve this problem! This is only a temporary fix and it dosent charge the battery, but I can use the mac on AC only when it is plugged so that's how it happened the charger is plugged into the mac and socket is in the same loop as explained above, then when I remove the battery leads to the mother board or logic board do not know who , but one at the top, then the mac tries to start u see the Apple screen and then it turns off back. Then after a few seconds the fan starts and SIL flashes 4-5times and turns off, then starts again now, when I connect the battery cables again once (while the lights flash) now it starts perfectly and without brand X on the battery icon it shows not charging and the task kernel upward a big piece of my ram There is absolutely no free ram, I found the culprit core task and it is a process owned by the root, that it was something like coreutd I have strength that quitting smoking and the RAM is free as usual when I restart I have to go through all these things that I've done to start the first time and this time another process owned by the root with the task of kernel so I stop and ram is normal again every time I restart the ram is completely sold out

• After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  And this is not recognitze by any device, computer or iPhone 6plus.

  If you or the original owner did not have the password no one here or at Apple can help you.

• Satellite X 205-S9349 - second HDD are not bootable

  Hi all.
  I encountered a very strange error: my second HDD are not bootable, but only on my note (have 2 hard drives and I have installed Vista on the first and XP on the second). It worked well for about year.

  And once I worked in Vista, I've just going to boot XP and restarted just the note and it did not start more than just initialization on the post screen. It initializes everithing is nice and I can even manage BIOS but goes no further.

  After that, I tested each part if it does not my notes to start and this is the second HARD drive. I have tried to swich my HARD drives, but it does not work. Two SATA connectors work although I tested with the first HARD drive. If I comment on second HARD drive in BIOS, the system starts up nice, I can see the second HARD drive and work with it.
  But if this is not comment system does not further thant post-test after it initialized everithing!

  The strange is that it works well on my desk. Not a single problem with this HARD drive, I installed XP on it and it starts ok.
  I tried to format the HARD drive, in order to kill and create the partition, even to write own mbr... None of it worked)
  It still won't go note during an office is ok.

  Pls if people if anyone can help me with a post serious ideas here or send me an email - [email protected]

  Thank you

  How did you choose which OS should start?
  You use a boot manager?

  I have the Satellite Pro P300 with two hard drives (each with two partitions). On the fist one I installed Windows XP Home edition and Vista second. When I start my Windows laptop boot manager asks me what operating system I want to start.

  How it worked on your laptop?

• I sent 2 SMS to the iPhone even from the same location 1 hour out. Why I was charged for the second message, but not the first?

  I sent 2 SMS on the phone even in the same place 1 hour apart. I was charged for the second message, but not the first. Why charge me? I was under the impression that the messages sent between iPhones are free?

  I was under the impression that the messages sent between iPhones are free?

  It's a little more complicated than that.

  If the message is sent as an iMessage (blue) uses the data that could be part of your cellular data allowance or WiFi depending on what you are connected to. If it is sent as SMS (green) it takes however your carrier charges you for SMS.

  For a message to be sent in an iMessage, both parties need to have a device capable of iMessage (e.g., iPhone, iPad, Mac), iMessages allowed to have (settings > Messages > iMessage > on) and be connected to the data (Wifi or cellular).

• Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

  Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

  aarruunn, you might want to try Windows Installer Cleanup utility.

  http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

• I need to reinstall Windows XP SP2, but my windows XP installation CD is cracked and would not read.

  Cracked Windows XP SP2 CD

  I need to reinstall Windows XP SP2, but my windows XP installation CD is cracked and would not read. I have the product key and proof of license. Is there a way to download files from microsoft directly support installation using this information.

  Please see:

  http://support.microsoft.com/kb/326246 .