My second drive is not recognized for the installation

Similar Questions

• HARD drive is not recognized in the installation of Windows 7 settings

  Hello

  I'm trying to install Windows 7 Home premium to my Toshiba Tecra S3 model PTS30E 00Z036DU but when I install Windows 7 after a while he asked me about the witch device to install one must choose a hard drive, but the field is empty then I choose to load the driver, but I put t know which driver I need, I try my HD which is installed on this laptop and I have windows xp who works at the moment on this laptop but it don t accept this one an of my Toshiba CDrom Setup is not a windows 7 looking...

  Can someone help me?
  I've updated the BIOS to version 3.20

  Concerning
  Michel

  The Netherlands

  Hey,.

  I checked the Web from Toshiba site and it seems that you need RAID driver for install Windows properly. The driver is required to get recognized hard drives

  It seems that this driver is available for XP and 2000 only because the laptop is old enough, I think that Yes it doesn't support Vista or Windows 7 I think. You can only try the XP driver. If it doesn t work you must use the operating system preinstalled Toshiba were all working properly! :)

• Hard drive is not recognized in the BIOS - Equium A60

  Hi hope someone can help. I have a Toshiba Equium EA60-173 and the hard drive is not recognized in the BIOS. When I remove the hard drive and put it in another laptop it is detected fine. I also tried another hard drive in the Toshiba and that does not work either. So I suspect the IDE controller has disappeared, but can I do to confirm this? I wish there was an option in the BIOS to force detection. I updated the BIOS but still the same.

  This laptop is only just out of warranty, so if it is the controller would I need to replace the motherboard? Are there other options at my disposal?

  Thanks in advance.

  Hi Neil,

  Unless there is some physical\problem with the cable/connector hard drive, then it is most likely that you will have a new mainboard for your laptop. I suggest you to contact an authorized service partner and ask them to check your laptop and give you an estimate of the cost of the repair. Then you can try to shop for less expensive alternatives.

  Kind regards

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings

• External hard drive is not recognized and the Table to Partition GUID (GPT) partitioning scheme has message is required (-69773)

  Hello!

  I have an external HD that has been unplugued without eject by mistake. Since then, the HD is not recognized by the finder or disk utility.

  When I list the disk in the Terminal, the drive is listed.

  But when I tried to check or repair, a message appears: "failed to check this disc: a Partition GUID (GPT) partitioning schΘma Table is required (-69773).

  I can access the files using programs such as Seagate File Recovery, but I want to extract data and repair the disk without using 3rd party software.

  Is this possible?

  If you have access to the files - a possibility would be to get the files off the disk and then reformat using disk utility

• CD/DVD-ROM not recognized since the installation of Vista, without errors

  Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• pilot missing dvd/CD; drive even not recognized by the computer

  somehow, when I tried to burn a dvd, (windows DVD Creator) the computer seems to have removed its own driver for the dvd drive (I put the disc in, it recognized that it was not a disk supported, put a new one in the drive, and create dvd windows then told me that I need to install a dvd/cd writer to complete my project). the relase button disk would not work after turning in the second disc and always used to work even after that. If I use a pin code manually to open and put a disk in the light lights up recocnizing there is something in there, but that nothing, not even spin the disc. No cd, dvd or all other discs work. Ive tried a few different driver Fixer programs, even those you pay (mender driver, driver detective - no even to recognize the missing driver) and can't seem to find a solution. cd/DVD device does not even appear in "device system' list or lists of material which must show all devices, programs or drivers... also do not show my E: / in my computer, what would be my dvd/cd drive." I tried the "regedit" and could not find the 'filter filter up/down' you are supposed to remove to fix. " filter of upper/lower case is not listed in the options.

  I'm on a hp Pavilion dv6000 and ive tried searching on the site Web of hp and help all forums, with no solution until now...

  Hello

  For the CD/DVD problem start up that convenience store and work down to jump
  nothing. He is even said to continue if the CD/DVD drive is not displayed in Device Manager.
  You are much less likely to solve the problem by a hit or miss approach to try this
  or such. And of course, there may be a material cause.

  The HP forums, ask questions and I hope that those who have had
  the same issues on similar equipment that have solved the issue respond. Only way
  to succeed is to give your best effort.

  HP does not have a lot of online documentation and help diagnostics on their site and those
  could help to resolve some of the questions withour paying for support.

  Back up your data on the device and it goes back out of the box state
  can be one of the best moves to solve the present problems.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Password not recognized for the new Gmail account

  My gmail account ID / password is not recognized by Thunderbird. It worked, but somehow it has suddenly stopped working (not able to receive or send emails and just make an hourglass whenever I select any folder in the account).

  Some other details:

  . I use Thunderbird 38 (could the upgrade caused the problem?).
  . I tried to remove and re-add the account. It connects fine, but does not recognize the username/password.
  . I did some Google 2-step of checking is turned off.
  . I deleted the Google Contacts.
  . I checked that access for less secure applications is disabled in Google (even though I believe that Thunderbird 38 should not require this).

  I followed all the steps I find Google search, including the https://support.mozilla.org/en-US/kb/thunderbird-and-gmailsite. Nothing seems to help.

  I'm up a Creek. I like Thunderbird (use it for multiple e-mail accounts), but hair pulling try that it works - and it takes too long. Any suggestions?

  Thank you.

  account15:
  ENTRANTS: account15, (imap) imap.googlemail.com:993, SSL, OAuth2
  OUTBOUND: smtp.googlemail.com:587, SSL, passwordCleartext, true

  You will need to set OAuth2 authentication for the SMTP server as well.

• Satellite L100: CD/DVD drive is not recognized in the Bios or workstation

  Satellite L100 - 170 No.PSLA3E model 02501QEN under Win XP.

  The icon of the CD/DVD drive has disappeared from the desktop and is not listed in the Device Manager or showing in the BIOS.
  There is power to the drive and the tray ejects OK
  I tried to use the ease of adding new hardware in the Control Panel, but it does not list a CD player.
  I removed the disc and then re - it sitting, but it made no difference.

  I used the restoration of the system for the last available date 26 January 08, but it does not restore the CD player... and I have none, he worked at that time.
  I don't think it's a faulty drive, because he is picking up power and when you insert a CD, it starts as if she was about to read the disc, but nothing appears on the screen.

  The laptop belongs to a child with autism and all I can get out he is "I don't know" when asked what happened to the laptop.
  Sorry I don't have any other information.

  Can anyone help.

  Thank you

  Jan

  Well, usually if the CD/DVD drive doesn t appear in the BIOS or BIOS cannot recognize the ODD then chances are that the CD/DVD drive is malfunctioning.

  But the best way to check this is a new installation of the OS. You should try to boot from a bootable XP CD.
  If the laptop would be able to boot from the CD, then the material is ok.

• IomegaWare Zip 100 drive unit not recognized by the computer of Windows 8

  Help, please. I bought a zip 100 Iomega drive to retrieve ONLY data (files/photos) from a pile of old zip disks. My laptop Lenovo (windows 8) nor my HP desktop computer (windows 7) recognize the zip drive external usb.  Are there compatible drivers anywhere? I spent hours online, trying to check or correct the incompatibility issues, but also obsolete driver problems without success. The disc provided for installing out-of-date drivers. I am not a technician. Any help would be useful. I have an external hard drive functional, functional. I just want to get the data off the old 100 iomega zip disks.  I don't plan to do anything else with the zips or zip drive. And Yes, I should have done this earlier, but like many busy people know, sometimes time can get the better of you. The loss of these data would at best heartbroken as the discs containing pictures and original, irreplaceable data.

  You may be able to install a driver that is inherited in compatibility mode.  Get the latest driver that has HP and install it like this compatibility mode

  To install in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

  () works in win 7, 8 to win and win 10)

• Drive is not recognized by the burner

  This question has been posted in response to the following article: http://help.Adobe.com/en_US/premiereelements/using/WS4637EC8D-298A-4A13-91C8-0F18992BFEC4. html

  Casey1107 wrote:

  HL_DT-ST DVDRAM GT34N

  It is a LG burner and should work with both types of disc. As you say the equipment is new, you should probably go to the LG website and look for a firmware update. You may even find that it has installed a small program to automatically search for the latest firmware.

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• HP pavilion g4-1304au notebookpc - HARD drive is not found during the installation of Windows XP

  name of the product - hp pavilion g4-1304au notebookpc

  product no - #ACJ D4X79PC

  processor - AMD A4 - 3330 X

  During the installation of windows XP, it shows an error that the "mass storage is not recognized.

  Please give me Slipstreamer pilot for the specification above.

  You can follow the instructions in the following document, which allows you to install Windows XP on your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=5046252&prodTypeId=321957&ObjectID=c01092639

  Also make sure that you install the last Windows XP SP3 for laptops and get into the BIOS and change a SATA AHCI to IDE / legacy mode.

  Also, if there is a parameter called "Secure Boot", disable it.

  I hope this helps.

• My serial number that has been given does not work for the installation of the program of the premier adobe elements.  What should I do?

  The serial number that gave me to install Adobe Premier elements 14 does not work.  How can I get a serial number of work in order to proceed with the installation of a program that I already paid for.  I can't get anyone on the phone with Adobe to help me.

  Error "serial number is not valid for this product". Creative Suite

  Select a topic and then I STILL NEED HELP to start the first elements online chat

  -http://helpx.adobe.com/contact.html?step=PRE

• My Nec DVD RW ND-3520AW drive is not recognized by the system due to the corruption of recording possible

  I have a Gateway desktop and 510 x 86 with Windows XP Home SP3 and Internet Explorer 8.  My system does not recognize my DVD NEC drive due to recording possible file corruption.  How can I clean or set registry entries and/or device driver and get Device Manager to recognize the drive?

  http://support.Microsoft.com/kb/314060

  FixIt have a bad reputation on this forum, so you can go directly to "fix it myself" bit (for XP).

  Let us know how you go.

  Tricky