object on effect Albums

Similar Questions

• Cp9 - object repeat & effect on a single slide

  Does anyone know of a combination of measures advances/conditional actions/variables/or any method that will allow me to repeat a single object and effect several times without having to duplicate the real object more than once?  Version Cp9.  Basically repeating the object and accompanying effects several times without dup of the object.

  Ryan

  1. Manual way is to reproduce the effect and spread them out on the timeline
  2. Partially automatic: use a tip action where you use the command apply effect several times, but each with a different departure time (new feature CP9)
  3. You can use the new ' delay next Actions by...' command under Advanced actions.»

• Offset path under object vs effects

  I have several fillings as a single object. When I select the fill and the lag path under 'path of the object-offset' I get a different result, then go to "effects-path-shifting."

  I'm having a hard time finding the difference in a way that makes sense.

  Thank you!

  Under objects compensates the entire path and all the fillings and follow the strokes. The direct effect can be targeted to compensate for one of the attributes of the path.

  

  or can be slipped and fell at a level diiferent for all the path attributes

  

• How to make a morphing/disintegration effect?

  Hello

  Complete newbie to Motion here...

  I'm filming tomorrow a customer for a hologram on a black background, and they want to turn into a 'happy birthday' in 3D after their speech in post.

  A bit like how this morphs of singer in a coca cola bottle here at 01:40, with the bottle in text. https://www.YouTube.com/watch?v=IHV-F_R0BMg

  What is the best way to achieve this?

  Thanks in advance

  https://UK.Pinterest.com/PIN/create/extension/

  Do you still use Yosemite? If so, what version of Motion do you have? Happy birthday 3-d is going to be much easier in motion 5.2 +.

  In the meantime, the basics:

  Luma Key background (you will need a cache of transparency around your subject.)

  Create a transmitter - 3D - objects swirling effect (you will need for Z-align your subject inside the "spiral")

  Fade out target - bland in 3D happy birthday text (and animate position final [I guess])

  1,2,3 - easy [but if you need assistance with the "details" - and you if you are as you say: a "complete newbie -" we can keep this thread going...]

• Scroll to Image/object/MovieClip as the Playbook Native clock App

  Hi guys,.

  I'm curious to know what makes scrolling image/object/movieclip effect, just like the native clock of the playbook application...

  What I get in my little mind, is that the clock app uses scroll pane that scroll horizontally.

  The 3 points are inside a container, and the container is set as the content of the scroll pane.

  the problem is that I do not understand how the elements also scaling vertically with the movement (scrolling the scrolling pane).

  I tried to scale according to the scroll event deltaX, but not good so far...

  Could someone here please help me get the idea of how to do this?

  Before thanks for your help

  Hi in case there are others like me who is also curious.

  Now I can able to scroll carousel effect, as the native clock of the playbook app.

  Here's what I do:

  -do clip in flash pro that animate the object to scale up and down.

  -import the .swc published in Flash Builder project,

  -call class video clips, add it to a container,

  -define the container as Scroll content pane,

  -Update of the current image of the video clips respectively as the scrolling of the scroll pane

  Sorry that my code is still a mess, if you want to know the code I use just PM me

  Now I am facing the problem with scrolling of the scroll pane, which does not display content to the top position of 1024px, but that's another question, which I'll post in the different thread

• ADDING SPECIAL TYPE SHADOW EFFECT

  Hello

  Is it possible to add the shadow as the Attaché in Illustrator, effect where it is not a drop of water full of shadow, but only half of the letters?

  Thank you!

  

  using the appearance Panel Add drop shadow for the same object 2 effects

  the first is white (see below).

  Second one is the same but black and and X & Y offset 2 mm

  

• I can trigger a click of the button effect?

  I love the new effects available in Captivate 9. I have a question though - I creates a type of "Gamified' slide and I want learners to click a button, and then the effect starts. In the effect controls panel, I see a menu drop down called trigger Animation, but there the value '(Self) time based animation' and I do not see a way to change this. Any help would be so appreciated. Thank you.

  You have 3 ways to start an effect:

  1. Time base
  2. During the click on an interactive object as a button (form)
  3. By advanced/shared action

  Take a look at the film in my first article in the review of Captivate 9:

  Play with Captivate 9 - Captivate blog

  Custom curve motion effects are applied by shared action, in the same action that displays a status of the central button. There are much more possibilities with these actions just by clicking a button. But if you want to use just one button: you will see in the drop-down list for the successful event of a button 'apply the effect '. If you choose this command, you will be able to indicate which object the effect has to apply and implement to that effect.

  BTW the effects are not new, except for the curves of the queries and the scribble effect. The workflow has been improved a lot. About 4 years ago, I wrote this article:

  Trajectories and custom effects reuse - Captivate blog Edition

  It is visited again today.

• Hardly no explainable inclined object (rotation) no issue of scrolling

  Thank you for your patience.

  I want my design elements to have a 4 degrees of tilt. I want to make rectangles so I may have some effects of scroll inside of them.

  I can't give a width of 100% rotated object so I have really wide rectangles. The problem is that these objects broad effect the width of the page.

  So the question is I can either:

  (A) make an object does not contribute to the width of the page?

  (B) make a skewed rectangle, or something else, which may have 100% width?

  I can't be the first to want that bit tilted look, perhaps there is another solution entirely.

  Here is a picture below where you can see the rotated rectangles.

  Thank you for your help in advance.

  

  Unfortunately, we cannot make the width for content rotation, I think you're referring to different forms that can be used as full-width.

  More details:

  https://forums.Adobe.com/thread/1392874

  Thank you

  Sanjit

• How can I fx not be limited to the layer or the edges of the object?

  Hello

  Im having problems applying effects to the objects, the effects that I place on them when it is applied is limited to the edgdes and look cut, how do I get rid of this?  Thank you

  Before dial to a larger model or use the effect limits to growth.

  Mylenium

• How to create a special effect to "scrub" and "the wheel".

  New to Captivate. Recently bought 7 Captivate. I'm trying to get an object 'Add effect' similar to the "wipe" (left) and the animation effects of "wheel" found in PowerPoint. I want to simulate manually draw a line of underscores in the text. I have an image .png (transparent background) red line hand drawn I want to appear "wiping" from left to right. The "stretch" (from left to right) effect found in 'Add effect' of Captivate is not look right; This is obviously a "stretch" instead of "cleansing".  Similarly, I would like to hand - draw one circle or oval around certain texts or other objects to draw attention to these elements. The animation 'wheel' in PowerPoint works perfectly for this.

  Is there a way to Captivate? Perhaps a variant of one of the built-in effects that I missed? Camtasia Studio has "sketch motion graphics' built-who does as well.

  To create a fading effect, you might be better to use the masquerade instead of the slider widget.  Just animate the mask object using movement of Captivate.  This will give you a realistic effect of wipe.

  See examples of effects with the widget of masquerade mask here:

  http://www.Infosemantics.com.au/Adobe-Captivate-widgets/masquerade

• How can I control setting multiplied between status object box & static box w / scrolling image: Folio

  I am trying to find a way to control the InDesign object "multiply" effect layer between a Black w / box state object transparency (which turns out as a transparent grey rather than black) and a static area w / scroll image with the same effect (which turns out correct transparent black dark, rich) parameters? I'm working on an iPad app "Folio" CS6. Thank you in advance!

  Blend modes are not supported overlays of static objects.

  Bob

• Documents with Smart Objects - very slow to open and save - Photoshop CS6

  When open and save documents with dynamic objects photoshop freezes the charger of the PS adobe (circle points) is replaced and the system loader (multi color wheel of death) runs for 30 seconds or more.

  What I've tried so far based on different positions by looking at.

  Photoshop Preferenes

  • Reduction in the background
  • Maximize PSD and PSB file compatibility ever
  • Tile cache size: 128 k
  • The advanced GPU settings: Basic & Normal
  • The layer Panel options: no thumbnail

  Observations and workthroughs so far

  • The size of the file and the amount of objects intelligent effects him propelling file that is more intelligent objects, you have the worse it gets
  • These files worked perfectly in PS CS5
  • It also happens on files created natively in PS CS6
  • The CPU is maxing out at 100%, while expenses for PS
  • Suitcase open or closed has no effect.

  System:

  • iMac 27 inches, mid-2011
  • 3.4 GHz Intel Core i7 processor
  • 16 GB 1333 MHz DDR3 memory
  • AMD Radeon HD 6970 M 1024 MB graphics card
  • Mac OS X Lion 10.7.5 (11G 63)
  • Suitcase 4

  Anyone got any ideas? It is making me go nuts!

  A solution!

  It turns out that the problem in my case was in fact the case. Previously, I tried to turn it off, but it does not solve the problem, so this time, I uninstalled it completely and the problem disappeared. Then I started to add new (installed 15.0.1, updated, etc) and the problem has resurfaced with the addition of the specific Photoshop plugin. Removal of this plugin solves the problem. So, it seems that "disabling" suitcase by stopping the TypeCore don't seem to actually deactivate all the tentacles that he sticks in your system.

  You can find the plugin here: Applications / Adobe Photoshop CS6 / plugins / automate / ExtensisFontManagementPSCS6.plugin

  (After a reboot, I also had to remove the font cache, as described here http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html but your mileage may vary.)

  Alternatively, if you do not want to remove the plugin, it disabled in Photoshop seems to work as well. To do this, go to file > Automate > Extensis, click on Preferences..., and then deselect enable Suitcase Fusion 4 - Automatic Activation.

  Fortunately, the plugin does not seem necessary at all to use the main features of suitcase (to activate and deactivate fonts) in Photoshop. I didn't even know what these plugins makes specific app until that research on this problem, and I don't always quite understand the point of them. I guess that they allow you to leave the apps for which they are installed a small bit more their own management (activate a font via suitcase that is not on the system-wide), but that seems to be more control I need - if I am allowing a police, I want that all my software to use it.

  In any case, the problem seems to be solved completely on my system now, although I have all this, so more tests in the coming days is required. I'll post here if problems arise. I'm interested in hearing if this solve for someone else.

• How can I know what is the effect of the filter bullseye target /?

  Sometimes I have layers or sublayers with a targeted bubble, and yet when I open the appearance palette, it does not show a situation of effect/filter/opacity that would let me know what the bubble indicates (CS4). I think a filter or effect can sometimes affect my production process and usually make a point about the position of the layer with the bubble under objects without effect on them.

  Is it possible that sometimes a 'fake' bubble appears when no effect or filter is on a layer/object?

  See the attributes palette? There is this tick in "Super shot". Looks like once we got a stroke, which was set to overprinting. The overprint setting remains, even if the gun is already off. Overprinting causes the appearance of being 'complex '.

• [CS3/4, JS] Apply the pen with an object style

  I was hoping to apply transparency via an object style effects using this:

  myObjectStyle.objectStyleContentEffectsCategorySettings.enableFeather = true;

  But "object does not support the property or method...". "etc.

  I would be very grateful if someone could point me in the right direction.

  Thanks in advance - Jeremy

  I had this same problem with the bevel and emboss effect and I just thought about it!

  Here is the code for my style of object and bevel/stamping out perfectly.  The key is the last line.  You must set the parameter applied to true so he could check the box and actually apply the effect.

  var myObjectStyle = myDocument.objectStyles.item ("FamilyOfFrame");
  try {}
  var myObjectStyle.name = MyName;
  }
  {} catch (MonErreur)
  myObjectStyle = myDocument.objectStyles.add({name:"FamilyOfFrame"});)
  }
  myObjectStyle.strokeWeight = 0;
  myObjectStyle.transparencySettings.bevelAndEmbossSettings.size =. 09;
  myObjectStyle.transparencySettings.bevelAndEmbossSettings.style = 2020618852;
  myObjectStyle.transparencySettings.bevelAndEmbossSettings.applied = true;

  But as I learn... not all effects include the "applied"... property

  Alex

• Do not clone objects list, just parent

  I have a need to create an object and add it to the parent list. I'm currently doing it like that.
  

  UnitOfWork uow = session.acquireUnitOfWork();
  MyChild newChildClone = uow.newInstance(MyChild.class);
  MyParent parentClone = uow.registerObject(parent);
  newChildClone.setParent(parentClone);
  parentClone.getChildren().add(newChildClone);
  uow.commit();

  This clone today of the parent's children, because they are responsible for the parentClone. How can I add a new child to the list without cloning all existing children?

  Probably the best you worry is not so much on this subject.

  If the collection is really large, you may want to consider,

  -If you use weaving (as when you use JPA and an agent, but can also be used in the native API with some effort) and use followed (by default with weaving) and lazy attribute changes.
  then the add() method will not trigger the collection to be instantiated. (must be use EclipseLink)
  - Otherwise, you could just not add it and assumes that the collection is not instantiated, or refresh the object or effect of invalidating the object after the validation.
  - Or just don't map the OneToMany relationship if you really never want to instantiate, query just for it if you really need.

  ---
  James: http://www.eclipselink.org: http://en.wikibooks.org/wiki/Java_Persistence