Objects individual access added during execution

Similar Questions

• Search fields added during execution

  Hi all

  I use Jdeveloper 12 c on internet explore 10 with 11g database on 64-bit.

  I followed the link as a tutorial.

  Oracle JDeveloper 12 c (12.1.2) tutorials - developing rich Web Applications with Oracle ADF

  step 8

  Develop control data EmpDetails1 and expand the node named criteria below him. Select all the searchable attributes and drag it to the new page query.jsf . Create it as a query > Panel request ADF.

  I had two problems

  1. the generated fields are too big, I want to control their width, but I don't see any field in the search box, instead, I see "search fields added during execution.

  2. I want to o excluding some areas. How to make since I can't see any generated field.

  Kindly guide me with this.

  Thank you.

  (1) the width of the fields is controlled to the view object. To change the width, you change the width to display the attributes in the suspicion ui tab.

  (2) this ID controlled of the view object. To hide an attribute in the query panel you uncheck "queryable". See JDEV: af:query hide some attributes of query panel but show them the results table | JDev & ADF Goodies

  Timo

• DragEnter added during execution

  Another question drag / move.

  I created containers when running, and I want to allow a user drag a new container on a canvas, then drag - move containers within this container.

  The problem is all the containers are built during execution, and I don't see how I can add dragEnter etc to it.  Here is the code I use to create the container.

      private function createFieldSet():Box{
              //  Returns a new Box container set as a field set
                   var newFieldSet:Box = new Box;
                   newFieldSet.width = 400;
                   newFieldSet.height = 50;
                   newFieldSet.setStyle("backgroundColor", 0xa5f48d);
                   newFieldSet.x = 0;
                   newFieldSet.id = idCounter.toString();
  
                   return newFieldSet;
              }
  

  So I want to allow a user to drag and drop into this new box once it has been created.

  Thank you

  Tom

  Before returning newFieldSet, follow these steps:

  newFieldSet.addEventListener (DragEvent.DRAG_ENTER, myEventHandler);

  If this post answers your question or assistance, please mark it as such.

• Deactivation of BPEL/BAM surveillance during execution

  Hello
  It is possible to disable/enable the built-in BPEL monitors to BAM (which uses the Express data objects of the monitor) during execution? I've not found properties or mbeans that can be changed in the MS for that. My other thought was to try to change a property/preference on the BPEL component via the composite.xml file. However, any changes made to the property "configuration.monitorLocation" through the EM does not get picked up. In addition, I was going to try to change the property 'enableProcessSensors' referenced in the Guide of the developer of the SOA (11.1.1.4 - section 50.3.3), but the property is never set in the composite.xml file as it says in the guide. I've tried turning on and off of the monitoring through the box several times as suggested by the guide (and recording in between), but the property is never created in the composite. Please let me know how manually set this property if it is indeed available.
  Please let me know if the disable/enable is available during execution.
  Thank you
  Ben

  Hi Ben,

  If you go to the SOA Composite in the EM there's a button called settings where you can choose to toggle monitors and sensors BPEL runtime.

  See if it helps.

  Published by: Arun Perron 7 Sep 2011 09:35

• Add and access viewstack childs during execution.

  Hello

  I have 3 static pages in my viewstack.

  only pages will be static and second and third alaways will be dynamic.

  Depending on the number, they get on the first page, that I have to add dynamically (run time) pages 2 and 3 to my viewstack and extract data new pages which user.

  My problem is:

  I can add pages dynamically to viewstack.but when I tried to recover the data form the dynamic pages that created when running I'm not able to get it.

  I tried to get in myViewStackId.getChildrenName (name) it is still throwing null.i can access all dynamic pages, but why I am not able to get by using id.

  Why aren't the children appearing in the table of childdescriptors runtime?

  Is there another way to add children during execution, they are accessible via AS?

  Help out me.

  Thanks in advance.

  Tinu.

  Hello David,.

  You can solve your problem by assiging dynamic page name, and then try to use myViewStackId.getChildByName (name) as:

  var myCanvas:Canvas = new canvas;

  myViewStackId.addChild (myCanvas);

  myCanvas.name = "someUniqueIdentifier"; You can save this to a mapping of object to access data faster;

  myCanvas.id = "someUniqueIdentifier"; If you need something [optional]

  Now you can access your viewStack child by saying:

  var mCanvas:Canvas = myViewStackId.getChildByName ("someUniqueIdentifier") as a backdrop. as you know that it's canvas

  Hope this helps you.

  See you soon

  -Vikash

• Fill the programmatic view object during execution

  Hi all

  I have a requirement to switch between the three different data source during execution in a single page. The user interface and the field names are the same for these three cases, but data from various sources (queries).

  So, imagine that we have 3 objects in view which has implemented read-only (object request depending on the view) and we want to fill a display object at the main performance as a data source for my page.

  My idea is to use "Prgorammatic view object" for this data source and then fill dynamically the contents of one of the three objects view read-only based on a setting in the user's selection.

  First of all, I want to know if it is thin approach and if yes, then get some points on the implementation or any other sample.

  I found this example:

  http://techiecook.WordPress.com/2011/05/17/programmatically-populate-view-objects-in-Oracle-ADF/

  Thanks in advance,

  Nasser

  Hello

  It is more a case of use for Adaptive connections. See:https://blogs.oracle.com/groundside/entry/towards_ultra_reusability_for_adf

  You can use EL to change the name of the ViewObject that an iterator in ADF queries its data. If the switch is on the link layer and there is no need for programmatic view objects. Unlike in the article of the blog above, VO 3 exist in your case then you don't need to create on the fly. Just change the name of VO in the managed bean referenced

  Frank

• Adding series to the table during execution?

  Newbie :-)
  
  I'm trying to add series to a chart during execution because the number of series to draw is variable and only determined once the XML of a HTTPService returns...
  
  My chart looks like this:
  
  < mx:PlotChart id = "mainChart" showDataTips = "true" width = "100%" height = "100%" >
  < mx:series >
  ...
  
  If I add:
  
  < mx:PlotSeries xField = "Size" yField = "CompetitorPrice" displayName = "Competitor price" / >
  
  then the data plots OK, but try to create the same AS serial does not work (nothing appears):
  
  var newSeries:PlotSeries = new PlotSeries();
  newSeries.xField = "size";
  newSeries.yField = "CompetitorPrice";
  newSeries.displayName = "SeriesAddedAtRuntime!"
  mainChart.series.push (newSeries);
  
  Debugging presents the new series added and it seems OK... but it does not appear on the graph. No errors.
  
  I tried mainChart.executeBindings (); and mainChart.validateNow (); with no chance, but I guess as to what is to be the case here, as you can probably!
  
  What Miss me something to force an update of the chart with the new series added?
  
  Thanks in advance
  
  John

  It is not displayed because the table is not aware of the change in ownership of the series. I think that to run the following steps (give an or take a few syntax errors):

  var set = mainChart.series;
  var newSeries:PlotSeries = new PlotSeries();
  ...
  Series.push (newSeries);
  mainChart.series = series;

• Filter the Table during execution and keep uncommitted line changes

  Hello

  I have a requirement which has been quite difficult for me so far.

  I use the first version Jdev 12 c.

  I have a table of AF that is connected to a ViewObject that is used for sending new data.

  When I add lines to this ViewObject, I put a field that I intend to use for filtering so that the number of lines is not displayed at the same time.  This field comes from a selection of LOV.

  I want to be able to change lines are displayed in the table based on what is the current value of selection LOV.  This isn't a problem for me, and it works perfectly using a view criteria and a variable transitional EO I put in place.

  My problem is that when I select a new value in the LOV and change to bind the variable view criteria, I want all changes uncommitted to the lines to be preserved in the View object.  Currently, the lines are not keep their changes, and I need to do this, because after that the user has entered data for a large number of lines, there will be a commit to the database for all new lines added.  Is this possible or should I look for an alternative?

  I also tried to use a table filter in the link of the page layer, but I get an error that I can't debug. It is marked as Houston-34014.  In this method, I try to access my bean in pageFlowScope to filter the table.  This bean variable is updated when the LOV selection changes.  Error messages settings are {0 = oracle.jbo.Key [-220-225], 1 = root}.  I also read that this filter parameter is a static filter and does not dynamically during execution.

  Any help would be appreciated, thanks for reading.

  Hello lhymel

  I think that your problem is solved, so please close this thread and open a new thread for tuning related problem

  Thank you

  -Ashish

• masking steps during execution

  I have a sous-suite that I point the user to when asked to isolate a card failure.  To give them some flexibility, I got a popup that gives them a certain number of options (see attachment).  I have an m.o. that indicates the individual steps these select/run (i.e. '1' or '3' in the png).  Control flow (denoted by '2') is the noise they don't really need to worry and may / will cause confusion (and possibly problems for me if they select them accidentally).  Is there a way to hide these measures flow during execution control so that the user sees '1' and '2' (and other similar 'valid' selections?

  If there wasn't a need explicit to have the flow control logic, then I'd be tempted to compact all in the post of the Popup Message action.

  

  By setting the Popup Message Action to go to the step, , use Custom Condition (TRUE):

  

  And by using the following Expression:

  Step.Result.ButtonHit == 1? RunState.Sequence.Main ["MR_RPack_R55"]. UniqueStepId:
  
  Step.Result.ButtonHit == 2? "" "RunState.Sequence.Main ["End_PCI_Isolation"]." UniqueStepId:
  
  Step.Result.ButtonHit is 3? RunState.Sequence.Main ["MR_R103"]. UniqueStepId:
  
  Step.Result.ButtonHit is 4? "" "RunState.Sequence.Main ["PCI_Intf_PT"]." UniqueStepId: «»

  It should be appropriate level following the Popup Message.

  (SequenceFile attached).

  I hope this helps.

  Charlie

• MCListbox property node does not during execution

  Hi I have problem with MCListbox property node. I wanted to fill the column with names and elements in the table.

  Initially, the program runs smoothly under development without error time.

  However when I she ran during execution of the table cannot be completed and produced by mistake. The error that says that "[get article] Config Registry.vi data: invalid object 0.

  I'm not sure what the error means that I need to find the bug in the moment of the execution because it works very well under development time. I found MCListbox property node errors after the names and elements are tempted to be filled in the table. I don't know why there are errors to the difference in time of development. See attachment below

  

  Thanks please advise

  Clement

  You read data from the configuration file? How do you get the path that it? You know that there is a difference (http://digital.ni.com/public.nsf/allkb/FD7DE8BC8FFC256C862565F4006BE363) between the path to the runtime and development environment? What LV version do you use? There are some recent changes. http://forums.NI.com/NI/board/message?board.ID=170&message.ID=473427&jump=true

• During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

  Original title: identity of unknown folder

  During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

  Can you tell me with regard to this issue, and what, if anything, I have to do?

  Thank you.

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

  "If no part tool above work try a third popular called Unlocker.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• during execution of the page, I got the below error

  Hi gurus,
  
  During execution of the page, I got the below error.
  
  Error (14.8): wnsgs.oracle.apps.pa.projectinfo.server.NewManagerCustomTableEOImpl of the class should be declared abstract. not setLastUpdateLogin (oracle.jbo.domain.Number) method defined in the class oracle.apps.fnd.framework.server.OAEntityImpl
  
  
  Please help me its very urgent
  
  Thank you
  Sandrine

  Hi Liza,

  Please check your columns WHO that u added correctly or not in your OT If not added you please define the setLastUpdateLogin() method in the java file NewManagerCustomTableEOImpl.

  Thank you
  Deb

• Add fields dynamically during execution

  Hi Experts,

  Is it possible to add fields to the form layout during execution. say at the click of a button similar to the Acro forms where we addFields() and deleteFields() methiods. InstanceManager can add subforms, but it is possible to add fields at run time.

  Kind regards.

  Rohit

  Subforms by themselves do not nuch... .they contain content (as fields), so when you add a subform you're actually adding content in the subform. So to answer your question, you cannot dynamically add a field, but you can add a field indirectly by adding a subform.

  Make sense?

  Paul

• Problem in setting style during execution by using setStyle?

  In most tutorials for FLEX, I find affecting components Runtime Style is a problem

  Can someone please let me know what's at stake if we set the style in the runtime help by calling setStyle

  Thanks in advnace.

  Hi Kiran,

  Call the setStyle() method can result in reduced performance. Use it only when absolutely necessary.
  You should try to apply style sheets rather than using the setStyle() method because it is expensive. This method should only be used when you change styles an object during execution.
  You cannot get or set the style properties directly on a component that you can with other properties. Instead, you set the properties of style at run time by using ActionScript getStyle() and setStyle() methods.

  Hope this will make things clear...

  Thank you

  Jean Claude Chari

• HOW TO IDENTIFY THE TYPE OF ACTIONSCRIPT CODE DURING EXECUTION

  Is it possible to get the version of actionscript in flash movie that is to say, if AS1.0 or AS2O or AS30 during execution?

  It is possible to detect the execution if a movie is of the type AVM1 and AVM2.

  AVM1 means all the movie clips targeted before the Flash Player 9. [AS1 or AS2]

  AVM2 means video clips focused on Flash player 9 or higher. [AS3]

  The following code detects the version of the clip.

  var img = _loader.getChildAt (0); _loader is a loader loading an external swf file object.

  If (img is AVM1Movie)

  {

  Alert ("avm1 movie...");

  }

  on the other

  {

  Alert ("avm2 movie...");

  }

  I don't think you can distinguish if the movieclip is AS1.0 or AS2.0. because, at compile time, the AS2.0 code gets converted to AS1.0 code.