Problem in setting style during execution by using setStyle?

Similar Questions

• Problem with the compilation by using the new compiler (Compilation failed during execution: compilation-abc)

  Hello

  Since the release of the fast compiler, I experienced problems with the compilation of the version release with it.

  As it was still in beta, and since it was still possible to use the legacy compiler, I chose to use the legacy compiler each time (especially since it was more stable).

  With this 64-bit iOS requirement came into play on February 1, the legacy compiler is no longer available because it has been completely removed from AIR 16 (and all future versions).

  Now, I can no longer compile release versions (debug versions are works well) because I have the following error every time:

  Error occurred during the application of packaging:

  Stack dump:

  0 program arguments: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/bin/compile-abc / compile - abc.exe - mtriple = armv7-apple-ios - filetype = obj - sdk C:\Program Files\Adobe\Adobe Flash Builder 4.7 (Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/avmglue.abc 64-fields C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/air-fields.)) arm-air.txt-O3-ane-symbol = MmgCmApiExtInitializer - ane-symbol = MmgCmApiExtFinalizer - ane-symbol = MmgRbApiExtInitializer - ane-symbol = MmgRbApiExtFinalizer - ane-symbol = MmgStoreKitApiExtInitializer-ane symbol = MmgStoreKitApiExtFinalizer-ane symbol = MmgGoViralApiExtInitializer-ane symbol = MmgGoViralApiExtFinalizer-ane symbol = MmgGaApiExtInitializer - ane-symbol = MmgGaApiExtFinalizer - ane-symbol = MmgGAIDFAAccessApiExtInitializer - ane-symbol = MmgGAIDFAAccessApiExtFinalizer - ane-symbol = AFExtensionInitializer - ane-symbol = PushwooshExtInitializer - ane-symbol = PushwooshExtFinalizer elease-temp\AOT\AOTBuildOutput4982262150932522887.tmp\ABCFilesList.txt-abc-file-list=C:\BingoIslandWeb\Client-branch-1.06.05\BingoIslanMobile\BingoIsland\bin-r

  Compilation failed during execution: compilation-abc

  
  

  I tried to pin-point the source of the problem leaving specific things in the code, while removing all the rest,

  But so far, all I could find is that he has a problem with the classes that extend EventDispatcher.

  Anyone encounter this problem and knows how to work around it?

  Thank you!

  
  

  
  

  I had this problem also with other things. It was difficult to solve. Remove all const and var conversion in the Document class solve my problems

• Use of LabVIEW memory grows slowly but continuously during execution

  Hello

  I am having trouble with LabVIEW. I develop a data acquisition application. My application acquires data, it (i.e. make a FFT) processes and displays the FFT and samples acquired in some graphics.

  The problem I have encountered is Labview is allocation memory more every minute of what my program is running until finally, it crashes. When starting my program uses about 400 MB of memory after 4 minutes approximately 1.2 GB. Sometimes, when the memory usage reaches 1.2 GB it is suddenly up to 500 MB, but most of the time Labview crashes.

  I already checked the tool 'Profile Performance and Memory'. Surprisingly, my screws have constant use of memory during execution.

  Someone has an idea, what happens?

  Kind regards

  th

  
  

• Problem with pl/sql procedure, trying to get the value of the user during execution

  Hello

  Using oracle 11.2.0.3

  Can run sql that gets the value of the user during the fine workmanship and also via an anonymous block.

  uses of SQL & Enter_Product_Number

  anonymous block using: Enter_Product_number.

  However, get problems when trying to create a pl/sql procedure, use one of the above

  relevant below tried code part & and: buit works do not error, try bad bind variable if used: and ora-600 if try use &.

  How can we have a procedure from pl/sql that can call and receives a value of user during execution?

  Only way around what I can think of is to pass parameters to the procedure

  Thank you

  create or replace procedure ins_into_issues is

  v_nd_rec_cnt number (10);

  v_normal_rec_cnt number (10);

  Start

  Select count (*)

  in v_nd_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & old_nd_product_number;

  Select count (*)

  in v_normal_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & normal_product_number;

  -code below commented above works.

  end;

  Hello

  what something like this:

  create or replace procedure INS_INTO_ISSUES ( in_normal number, in_old number )  is
    v_nd_rec_cnt     number(10);
    v_normal_rec_cnt number(10);
  begin
      select count(*)
        into v_nd_rec_cnt
       from refmast.issues i
       where i.iss_product_num = in_old;
    --
      select count(*)
        into v_normal_rec_cnt
        from refmast.issues i
       where i.iss_product_num = in_normal;
  end;
  

  concerning

  Kay

• VMware converter 5.5 Update 1 and target host is 5.0.0 - is a known problem observed during execution of this?

  I intend to use vmware converter 5.5 update 1 and target host is 5.0.0.

  someone can confirm if there is any known problem observed during execution, it is?

  Welcome to the community,

  According to the Matrices of the interoperability of products VMware Converter 5.5 supports ESXi 4.0 and versions later, you shouldn't have issues related to the ESXi version you are using.

  André

• How can I draw several plots by using the XY graph during execution?

  Hello

  I want to draw several plots in the graph XY to the means of execution user will select the number of plots that he wants to draw, depending on this value, I have to get these values and use table generation and then I give to graph XY.

  During execution, but how to do this?

  Please help me in this regard.

  Kind regards

  Herald

  Why start a new thread?

• I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.

  As I had not heard of you, I tried to 'cut' of this folder and pasted into a folder, I called "temptemp" in the same root fodler lacation, (not in the original file). Run the program and it gave me the same error and closed again.  Any help now?

• masking steps during execution

  I have a sous-suite that I point the user to when asked to isolate a card failure.  To give them some flexibility, I got a popup that gives them a certain number of options (see attachment).  I have an m.o. that indicates the individual steps these select/run (i.e. '1' or '3' in the png).  Control flow (denoted by '2') is the noise they don't really need to worry and may / will cause confusion (and possibly problems for me if they select them accidentally).  Is there a way to hide these measures flow during execution control so that the user sees '1' and '2' (and other similar 'valid' selections?

  If there wasn't a need explicit to have the flow control logic, then I'd be tempted to compact all in the post of the Popup Message action.

  

  By setting the Popup Message Action to go to the step, , use Custom Condition (TRUE):

  

  And by using the following Expression:

  Step.Result.ButtonHit == 1? RunState.Sequence.Main ["MR_RPack_R55"]. UniqueStepId:
  
  Step.Result.ButtonHit == 2? "" "RunState.Sequence.Main ["End_PCI_Isolation"]." UniqueStepId:
  
  Step.Result.ButtonHit is 3? RunState.Sequence.Main ["MR_R103"]. UniqueStepId:
  
  Step.Result.ButtonHit is 4? "" "RunState.Sequence.Main ["PCI_Intf_PT"]." UniqueStepId: «»

  It should be appropriate level following the Popup Message.

  (SequenceFile attached).

  I hope this helps.

  Charlie

• Disable the extended FIFO FPGA target during execution

  Hello

  I use a FIFO extended target in my FPGA to constantly calculate the derivative of a measured value (dB/dt). Thus the FIFO stores all values during time dt. This means dt determines the number of items in the FIFO and dB is determined by the actual value less the oldest value in the FIFO. It works well when I initialize with the code in figure InitFIFO.

  But the FIFO of compensation is not possible (see figure clearFIFO). In the while loop if "reset dB" is false, as the new value of B is written on the FIFO, then the oldest value is read from, for the number of items in the FIFO remain constant. To change dt during execution, I need to clear the FIFO and initialize it with a new length (number of items). I tried the next loop, but it does not work. The FIFO does not initilized with the elements. The length is zero and the loop counter for (#deltaB Length2) is 0.

  What I am doing wrong? Is there a better way to erase a FIFO during execution in the FPGA? I'm now stuck for 2 days with this problem and looking forward to any idea or suggestion.

  Thank you very much. Best regards

  Andy

  Hej,

  Thank you for your response. You were correct, that deltab FIFO length was 0 because the defalt value was zero. The problem is that in my host vi on the RT system I put DeltaB FIFO length in a loop of high priority and as you can see when I restart the FPGA, DeltaB FIFO length has a valid value (the code in figure 1 works well with a local variable of DeltaB FIFO length in the FPGA). But the variable to set the variable "reset dB" is under the control of the loop of low priority of the host vi. And there, I had an entry DeltaB FIFO length unwired.

  So, I learned that a control FPGA read/write unwired sends a '0' or resets the variable to its default value in the FPGA. I assumed that nothing is transferred and the last variable is retained if you let a control read/write unwired. Now, I learned of this stupid error!

  Thanks a lot again!

  Andy

• ImageViewer BackColor property during execution

  Hello

  I use IMAQ Vision Development mould 2010 with VS 2010.  I have observed that the backcolor property is not active when running, even if it can be modified at design time.

  Is this a bug? I also observed that the pallet type is not changed to r untime.

  

  Any help is appreciated.

  There is a property called fill Image box Style you need to set solid rather than default.  Then you should be able to change color during execution.  If you have a default value, it you cannot change color.  Sorry I forgot that you use Visual Studio.  Even if I'm using LabVIEW, you should be able to do the same thing in Visual Studio, just put these two properties.

  * Edit: Just a quick note, it is not necessary for me to use a property node explicitly linked here.

  I hope this helps!

  

• DragEnter added during execution

  Another question drag / move.

  I created containers when running, and I want to allow a user drag a new container on a canvas, then drag - move containers within this container.

  The problem is all the containers are built during execution, and I don't see how I can add dragEnter etc to it.  Here is the code I use to create the container.

      private function createFieldSet():Box{
              //  Returns a new Box container set as a field set
                   var newFieldSet:Box = new Box;
                   newFieldSet.width = 400;
                   newFieldSet.height = 50;
                   newFieldSet.setStyle("backgroundColor", 0xa5f48d);
                   newFieldSet.x = 0;
                   newFieldSet.id = idCounter.toString();
  
                   return newFieldSet;
              }
  

  So I want to allow a user to drag and drop into this new box once it has been created.

  Thank you

  Tom

  Before returning newFieldSet, follow these steps:

  newFieldSet.addEventListener (DragEvent.DRAG_ENTER, myEventHandler);

  If this post answers your question or assistance, please mark it as such.

• modify VI during execution

  Dear users of LabView,

  I have a fairly general question about the development of a project, which requires a continuous control of the material. To be more precise, I develop LabView control and DAQ software for calorimeters in high volume in the last 2 years. Such a system requires several PID controls, and it has many subsystems. Because of the large heat capacity, it takes about 3-4 days to launch the system. So if I need to edit for example something in control of the final of a specific subsystem, I stop the LabView code, I have change the specific part, I restart the system, I wait for 3 days, and then I can see the result of my changes.

  My question is the sort of General: what is the good, let's say "best practice" to avoid such a dead time?

  Is it possible to change a VI during execution?

  I understand that if I run the independent screw, that dealing with subsystems, I could avoid this problem. But if I already have a compact 'main' VI, including all the subVIs, what can I do?

  It would be nice to have a sort of "hot swapping" feature in LabView, so during the execution of main VI of my project, I could change the Subvi that I want, and when it is ready to activate, the runtime would swap with the old version.

  Thanks for the tips and advice!

  Best wishes

  Hello

  It all depends on how works your vi...

  The only way I see is to use dynamic calls: a vi called dynamically is editable even if appellant vi is running.

  If you change the callee until the caller calls the vi vi.

  Is how the appellant under vi (this includes the values of connectors and run the VI):

  

  Best regards

• How to change the frequency of sampling DAQmx during execution?

  Hello guys. I'm using LabVIEW in the measures of the frequency response function. My application requires the sampling rate to change according to the frequency of the signal during execution.

  I tried to do it with a "structure of the event" and it works well when I change the rate manually via the front control but it backs do not work when I set up the sampling frequency to vary automatically (just a frequency sweep). Photos below:

  Why not the structure of the event feels the change in the value of "rate"?

  Thanks in advance for your help.

  Lucas

  Hello

  In "automatic mode" to change the sampling rate, the calculated rate is written in the local variable (as illustrated in the code).  Structure of the event does not change value in the local variable as an event.

  In order to make the structure of the event to recognize the change in value of an indicator such as event: write the new value to the property "Value (Sgnl)" corrosponding node to rate indicator (see figure below).  This will make the structure of the event accept the value change in the indicator as event.

  Note: Use architectures such as producers and consumers for such applications, which makes the application readable and expandable.

  See rear queries if any.

  

• MCListbox property node does not during execution

  Hi I have problem with MCListbox property node. I wanted to fill the column with names and elements in the table.

  Initially, the program runs smoothly under development without error time.

  However when I she ran during execution of the table cannot be completed and produced by mistake. The error that says that "[get article] Config Registry.vi data: invalid object 0.

  I'm not sure what the error means that I need to find the bug in the moment of the execution because it works very well under development time. I found MCListbox property node errors after the names and elements are tempted to be filled in the table. I don't know why there are errors to the difference in time of development. See attachment below

  

  Thanks please advise

  Clement

  You read data from the configuration file? How do you get the path that it? You know that there is a difference (http://digital.ni.com/public.nsf/allkb/FD7DE8BC8FFC256C862565F4006BE363) between the path to the runtime and development environment? What LV version do you use? There are some recent changes. http://forums.NI.com/NI/board/message?board.ID=170&message.ID=473427&jump=true

• change the frequency of the signal during execution

  Hi, I'm working on a VI to calculate excess of signal I think VI seems to be good (not sure) but now my problem is

  change the frequency during execution, which I am not able to do only when I stop and run the vi frequency changes... pls

  someone help me I tried to put in an event... but no use... maybe iam missing something pls help me...

  I noticed that you have some time a loop around the entire block diagram - I'm not entirely sure why that is.  The way you have your VI wrote that the two inner loops will never come out unless there is an error-'stop' buttons are hidden.  Thus, the outer loop is not do anything for you.

  Once you take it, it is easy to see why you cannot change frequency.  It is defined once, outside of the loops and so never gets checked again.  The best way to resolve this, in your case, is to use registers with shift on the upper loop and check if the value of the frequency has changed since the last iteration.  If so, generate a new waveform and feed DAQmx writing instead.

  See the version annexed to your main VI for what I mean.  (I also replaced the controls to stop with one that is visible and which will stop the two loops without your duty to hit the button abandon.) I'm also an error on the DAQmx read in the loop at the bottom, but I'm sure it will work fine on your equipment.

  See you soon,.

  Michael