Obsolete: mysql_pconnect(): the mysql extension is deprecated and will be removed in the future: instead, use mysqli or PDO

Similar Questions

• Some sites(basicaly Google) reports that my browser is obsolete, but the browser indicates that recent

  Some reports of sites (Google and my banking system) that my browser is obsolete and will be removed from the list of supported browsers. But my FF is up-to-date. When entering 'about' tab, it signals that don't need to update...

  User Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; ru; ( rv:1.9.0.7) Gecko/2009021910 Firefox/3.0.7 WebMoney AdCentriaIM/1.7 advise

  Your UserAgent indicates that you use Firefox 3.0.7 since February 2009 and not the 27 day of Firefox.

  type of topic: config in the URL bar and press ENTER.
  
  If you see the warning, you can confirm that you want to access this page.
  
  Filter = general.useragent.
  
  Right click the preferences that are "BOLD", a line at a time, select reset.
  
  Then restart Firefox

• Videos with the extension Bup, IFO and VOB do not play

  File extensions

  My videos with the extension Bup, IFO and VOB does not play. Free file I can download for them to work?

  VLC media player. http://www.videolan.org/VLC/ teengeek.freehostingcloud.com

• the .msi files shown as extension of the TEXT and will not be installed.

  I am trying to install a new program with the msi extension.  Instead of installing the file opens in Notepad.  Do not know what is happening, but any help would be appreciated.  I checked msiexec and it is started.  Tried to associate the file .msi for her, but without success.  Running Win7 Starter.

  Dick

  Well, I solved the problem.  For some reason when the file has been downloaded there is an extra extension added to the file. It should have been RadioICS - 213.mis, but instead got like RadioICS - 213.msi.txt which was the reason for which he showed in a txt file.

  I tired using the standard convention rename rename, but kept getting an error that the syntax is incorrect.

  It's the command I used:

  REN c:/Downloads/RadioICS-213.msi.txt RadioICS - 213.msi

  That did not work.

  Was able to download the file using my Ubuntu Linux normal and transferred the file to the Win7 netbook laptop.  No additional extensions and the application installed without problem.

  Thought you'd like to know.

• I have upgraded to vista 64-bit for windows 7 64-bit and all the photo files have http://www.jikos.cz/~Mikulas/links/screenshots/jpg.html extension and will not open.

  I changed just jpg extension and tried to open in Photo Viewer, but he says that he has no support for this file. Any thoughts of a solution?

  Hello

  I suggest that you try to open the same pictures using Windows photo manager and see if that helps.

  Right-click on a jpeg photo and try open Manager of picture Windows or Windows live photo gallery.

  Keep us updated with the results once you try the steps above.

• Install ZXP extension in Photoshop and it does not appear in the window/Extensions

  Hello, I can't install any file zxp for my Photoshop CC 2015, when I try to install the extension is said illustrator must be updated to 2015 of CC, I don't need to Illustartor, why do I need to have both programs to date, I only need to use Photoshop.

  I am installing MagicPicker (http://anastasiy.com/panels) and it still worked, the color wheel was always there and now after the recent update to 4.4 MagicPicker I don't see it. I use Adobe Extension Manager CC and I also tried to Unzip the file manually, nothing works. Please help.

  In the CC2015.1/2014 Anastasiy beta. ZXP Extension Installer works for MagicPicker and MixColors and other extensions too (confirmed SpecKing).

  

• How can I remove the default documents that come with a new Send on behalf of the Signature? (I9, W9, W4, etc..) These are old and obsolete, so I don't want those who will appear for selection.

  How can I remove the default documents that come with a new Send on behalf of Signature (EchoSign)? (I9, W9, W4, etc..) These are old and obsolete, so I don't want those who will appear for selection.

  With the account of the company, you will get an option to remove these forms.

  Pro account you will need to contact the support team EchoSign

  With the free account, it is not possible.

• Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

  Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

  The "General" cloud requirements are quite low... so you have to ask in the forums of specific program for a special features used by individual programs

  For video editing Premiere Pro, go read it in community: Forum Hardware | Adobe Community

• the computer says that my players flash is obsolete, so I tried to update, download of starts by stops at 25% and will not continue.

  the computer says that my players flash is obsolete, so I tried to update.  Start the download by stops at 25% and will not continue.

  This morning, we solved a problem which prevented Flash Player facilities to end for some of our Macintosh users.

  If you have encountered this problem, please remove any previously downloaded program installation of Flash Player and either:

  (1.) download the installer from https://get.adobe.com/flashplayer

  2.) download the standalone installer from http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

• Since the last update the Facebook and Twitter embarks on a site that I use often went empty. This is not the case with other browsers.

  "Living foods" to Twitter and Facebook on a site that I use frequently have only a title but no content 'feed '. I think that this problem started 3 days ago, when Firefox has been updated. The problem is not present in using another browser and not on the phones or tablets.

  One of the changes in Firefox 42 title adds a blocker follow-up in private browsing windows. That type of filtering may affect integrated features of the social site.

  If you use private windows, you can disable the functionality of anti-tracking on the Options page as a test. This article contains more information on where to find this setting: the Tracking in private browsing Protection.

  If the problem occurs in windows common, hmm... I think you have already tested in Firefox Safe Mode, but if not:

  In Safe Mode, Firefox disables extensions, hardware acceleration, and a few other advanced features to help you determine if they are at the origin of the problem.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

• My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default

  My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default browser and it would not allow me to change back. I realized that I had something that I had not needed so I tried to remove it. It took a morning full of accomplish this chore. I went back to Firefox and found that my tabs were there, but they were opaque and would not work. In fact, you could read what was beneath them. No way to get anything wthout return to the start page of Firefox. I uninstalled Firefox and put it back on and it was always the same thing with the non operation of the opaque tabs. Troops you have good ideas as to how I can get my Firefox working again?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Yahoo mail and yahoo Web sites not be loading not on safari April 10, 2916. How to get around this problem? Œuvres of chrome! What is the future of mac?

  Yahoo mail and yahoo Web sites not to load not on safari as of April 10, 2016. How to get around this problem? Œuvres of chrome! What is the future of mac?

  Could be a cookie problem...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click on: Remove all data from the Web site

  If this does not help, you can have this Yahoo pages preventing to open a Safari extension or third party plugin installed.

  In the Safari menu, click Safari > Preferences , and select the tab ' Extensions '. If there are installed extensions, one at a time uninstall and exit then restart Safari to test.

  If it is not a question of extensions, try troubleshooting third-party plug-ins.

  Back to Safari > Preferences. This time select the tab Security Deselect: plug-ins Allow. Quit and restart Safari to test.

  If it makes a difference, the instructions of troubleshooting plugins here.

• I was on the site of the Bank of talents of Michigan for unemployment before and now it will not open... I emptied my story and scanned my laptop for all problems and all out ok. But if I use aol it will load the page very well.

  I've been on this site before on FireFox and now it will not load. But all other websites work fine.

  https://www.michworks.org/MTB/user/MTB_EMPL.EntryMainPage
  
  No problem here with Firefox 3.6.13 under WinXP.

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Effect on correction of the CJC to use copper instead of type thermocouple extension cables

  Hello people. It is is a kind of "phenomenological" question, lumping together a bunch of real problems. Type of hope that someone had experience try this and can give me an advice.

  I'm looking to make measurements of temperature relatively high speed with very fine wire of type K or N thermocouples.

  I will be very many TC - about 75 in quantity and therefore will be, if it works well enough, wire the asymmetrical (I trading accuracy for amount in light of the SCB-two 68).

  My complete data acquisition system is:

  Computer PXI

  PXI-6225

  (Qty 2) SCB-68

  QUESTION 1: Any recommendations in the configuration of these two NRSE or GRSE? The device, I am close to (but not electrically in contact with) is completely without merit (experience of combustion). TC fine wire is indeed very thin, and their not armoured lengths will be about 12 ". There is no significant EMF/EMI around my experience. I will experiment but just wanted to know if anyone can rule something here...

  QUESTION 2:

  Important points:

  • I want to use type N for additional above K to my temperature range and also because that N-type are available in smaller caliber (0.003 ") and stability welded end to end.
  • Unfortunately, I n ' t has a bunch of N type connectors - if I have to use/buy the N type connectors this is a significant cost (see the stop).
  • My Setup has the TC in the physical location of 'groups' of 7. Given the asymmetric configuration, I have 7 anodes and 1 single "reason" for each "group" - for a set of 8 wires out of each "group".
  • I need to connect on the order of 80-wire in both SCB-68. I try to minimize the number of threads that I have to deal with.
  • Omega does not sell single conductor wire anode and cathode for the N-type as they do for K-type. They sell only duplex son.
  • Omega is also not sell armored bundles of type N, as they do in K-type
  • If I use type N TC and I use the real N type extension wire, it will have to be duplex (because of two previous points) - it's something like 80 PAIRS of wiring, with one of the sons of the cathode on most of the wires not used (because of the asymmetrical configuration).

  It seems that I must consider the following compromise:

  Use the TC type desired N and treat approximately 80 pairs of duplex wire extension of type N OR less desired TC type K and purchase grouped, shielded wiring to minimize the mess of wiring GOLD copper use extension (WHAT?)...

  Yes! Why can't I use the copper wire extension to the fine N TC of the cable type and connect to the TC with a kind of nonmetallic connector (like screws nylon) or solder? The attraction here is that I could use the signal wire 8 drivers together, to each of my TC 'groups '. This would reduce and clean my wiring and not need to buy all type N connectors (TC would be wired, no connector involved).

  It seems to me that I could simply set up the cold welding (CSF) on board the SCB-68 fixed to work on N-type. Copper wire would result of the SCB-68 the TC type N. No metal connectors would participate. Thusly, being only one junctions P/OMEGA-copper and copper/OMEGA-N to deal with the CCM. This sounds like it would be exactly the same as a N-type wiring directly into the SCB-68, except that there may be error between the temperature reading to the CJCS and the junction of alloy copper/OMEGA real. This won't be a significant error because the two locations will be very close in temperature.

  If this "mistake" of temperature becomes a concern I can mount a TC that is unique to the copper/TC junction and make my own corrections (I think...)

  Here is a little schematic text (without taking into account all shunt connections in the CSR circuits...):

  Any circuit anode/channel: SCB-68 Terminal-> extension copper-> (direct connection via the non-metallic connector) OMEGA-P of the N type TC

  Common ground circuit/channel: SCB-68 Terminal-> extension copper-> (direct connection via the non-metallic connector) OMEGA-N to the N type TC

  This idea implies that the circuit board within the SCB-68 has copper conductors, such as the addition of copper extension wire would not create an additional junction.

  Anyone tried this? Can someone offer me some ideas?

  THANK YOU in advance!

  -Dan

  ddml wrote:

  Henrik-

  Thanks for the very useful reply. Yes, I forgot to mention that the lengths of wire extension will be the order of 1 m, then resistance extension must be low, even if common ground is used as part of an arrangement of asymmetrical circuit.

  ...

  Here's my last logic!

  • If my experience shows that the single-ended NRSE GRSE arrangement response or "match" the differential response conservative, I will choose asymmetric for more sampling points.
  • Since I know the extension wire / TC to the ASE will be nearly isothermal with the CBS itself, I would like to use the extensions of copper and accept (and possibly correct?) the error based on the temperature. I would like to use threads, as this I need 7 + and 1 ground by grouping of 7 TC to my DUT (Recalling)-> http://www.newark.com/jsp/content/printCatalog.jsp?cat=c127&page=1199&display=zoom
  • If during the examination of the previous point, I find that copper extensions are NOT practical and I need to use tank extensions of TC-metal all the way, then I choose a TC type K on an N-type. The reason is that there are many more options for tanks, bundled extension cable type K (N-type is apparently a sort of new and not very popular). However if copper extensions are possible, then I'll use the TC type N, motivated by their superior high temperature oxidizing atmosphere stability and the fact that I can get them in a configuration welded end to end to 0.003 "caliber!

  If none of this logic seems faulty or unrealistic, I would appreciate it really more input! I don't know that it will be a lot of work!

  Thank you once again,

  -Dan

  Dan,

  I've marked the important phrase what you're actually doing is moving the CCM of the CBS for the TC/copper connection. Any difference in temperature will directly add to the error.

  However, don't try to save the copper with your approach to 7 + 1, ask IT for another 12 m Ethernetcable guys more and go with 7 * 2 + 1 pair of reserve and make the summary at or near the CBS. IF you need a differntial measument system later, you need to rebuild all connections. (And not just add a new cable for all conical fittings, it is the twisted pair that makes the magic Yes, same vor 1 m!) Remember that you are dealing with µV! And since you want to quick reads without filter a lot of way, do not try to save $10 to about 12 m of cable. Somehow I have the feeling that you try you anyway

• MOD (JVC's Everio camcorder file extension) files will not play on windows media player and will not be imported on windows movie maker (on windows Vista Home Basic)

  Hi I have a JVC's Everio camcorder. This unit uses a strange video file extension (is MOD). I try to play these video files on windows media player, but it won't play. I also tried to import these files into windows movie maker, but he won't.
  Please give me a solution. I would be grateful for any ideas.

  Hello, thekissfan

  Please use the Forum for answers!

  I'm moving your message to the sounds and the media.

  Rename the extension .mpg video and see if you are able to view them.

  If this is not the case, check with JVC for instructions on how to edit video files.

  I hope this helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If a post has solved your problem, be sure to mark it as a response and if there is a useful message, don't forget to vote as useful for helping others find easier solutions.

  ======================================
  Yes, rename the files MOD xxx.mpg worth trying...

  If this does not work... you need to convert a compatible
  format like .wmv. The following links would be useful
  at a glance:

  Movie Maker 2 - importing files MOD
  http://www.Papajohn.org/mm2-importing-video-mod.html

  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/mm2-importing-video-MPEG2.html

  Movie Maker 2 - video import from drives
  http://www.Papajohn.org/mm2-importing-video-discs.html

  How to edit JVC. MOD files in a few easy steps
  http://www.YouTube.com/watch?v=ZY-cKaCEUJ4
  John Inzer - MS - MVP - digital media experience