OCR for documents with multiple languages

Similar Questions

• How to export to pdf 1 sheet in a document with multiple sheets

  As the title says, my numbers document has several sheets.  I need to export one of these sheets as a pdf document, but instead it exports all sheets in a single PDF with multiple pages (1 page per sheet).

  Grateful for your help!

  Hi Michele,

  Instead of export, go to the sheet you want and use the Menu > file > print.

  In the Print Setup Panel, choose this sheet.

  Click on print... to see the print dialog.

  At the bottom left, click on the PDF pop up.

  You can open a PDF in preview (and print it from there), or print in PDF format.

  Click done to return to your document.

  Kind regards

  Ian.

• Language settings - work with multiple languages

  Dreamweaver Developer Toolbox, in the Control Panel, have a tab to define the site language, for bugs, errors, check the form, etc.

  I m working in a Web site with two languages, English and Spanish: How do I view messages in the appropriate language?
  

  

  I look at the tutorial to create a site multilingual, the user select a language and that create a session variable, which is a suffix to the folder "resources." This could be a solution, but isn´t exactly what I need.

  Have been thinking about it again:

  1. This tutorial introduces a custom Session Variable named 'language '.

  2 that tutorial explains how to make the user to choose his preferred language of uninstall in a drop down menu - but the corresponding "code language" can of course be derived from a column value that s been stored in your "login" MEASURING table

  Now, imagine you´d be...

  1. offer your site visitors (by adding an extra 'language' menu from your login form and storing the language code in which column of the table "login"...) the ability to define its language on this occasion, and...

  2. Add the 'global' correspondent uninstall Session variable, say «language», in the control panel

  In my view, this has a huge advantage over the approach described in this tutorial, because once the 'language' has become defined as THE Session variables, the corresponding value will be available on each dynamic list and a dynamic form without further delay.

  See you soon,.

  Günter

• El Capitan permissions bad for lib with multiple users

  On my Mac with multiple users and running El Capitan, I encountered a problem with an application (GoGlobal) failed to start with "errno = 13", which is a problem of permissions with usr/local/lib /.

  I determined that on Yosemite, usr/local/lib was owned by root and permissions: drwxr-xr-x. However, on El Capitan, usr/local/usr / local / lib lib is owned by one of the nicks (random?) and has permissions drwx-, which is the source of the errno = 13.

  I got around the problem by chmod 755 to lib /, but I fear that a future update will reset these permissions impassable previous values. Please correct these settings in install and update routines.

  GoGlobal isn't a request to Apple. You can send your message to the developer, who develops not only the Application itself, but the installation script that puts in place of its components.

• AutoFill no longer works for sites with multiple login accounts

  A few days before, (I think after the update of FireFox 31), I noticed websites where I have multiple accounts login, I cannot select the username I want autofilled.
  for example: Say Gmail (or yahoo mail), I have multiple user accounts. Clicking in the user name field, correctly lists the accounts that I have on this site. However, by clicking on one of these ID does not being filled with auto name. I have to type in the entire code.
  Sites where I only have 1 ID continue to work properly.
  On a 'Utilities' Bill-pay site, where I used to have an old inactive ID, in addition to an asset, also wouldn't let me pick/auto-fill the active code. However, when I deleted the inactive ID in the drop-down list, the rest of the ID of 1 gets filled with auto.
  Once the ID is filled in, the password gets filled with auto.

  Any idea?

  You can check if this problem is caused by an extension.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• scanning documents with multiple pages on 2542 all-in-one

  Therer is a way to scan multiple pages into a single pdf file on an HP 2542 all-in-one printer/scanner

  Hello

  Since your computer open the HP Deskjet 2540 software anc lcik on scan a document or photo.

  Select PDF and make sure the option Show Scan preview is checked.

  Ensure that the scanning resolution is 300 dpi or lower.

  Click Scan in the scan preview, click the button add page, under the overview of digitization, once you have finished click on save or finish to compete with the analytical work.

  Shlomi

• Search for documents with attachments

  Is their way to update a search query to return only documents HTML attachments?

  I think that using the dRendition1 parameter you would get content items according to your requirement for specific attachments.

  For example: to list all content items with attachments that have been added to the option "Add attachments" contained actions, use the following query:

  QueryText = dRendition1 'Z '.

  T - gives a list of all the jpg thumbnails

  G - would give the list of all gif thumbnails

  P - would give the list of all thumbnails of png

  X would give attach list XML all elements (those who have threads)

  So, by changing the value of rendition1 parameter, you can get the search to return only elements that have some form of attachments.

  For example: http://hostname/ReportServer: port/cs/idcplg? IdcService = GET_SEARCH_RESULTS & QueryText = dRendition1 'Z' & SortField = dInDate & SortOrder = Desc & ResultCount = 100

  I hope this helps.

  Thank you

  Srinath

• Increase throughput for iSCSI with multiple NICs

  I'm implementing a new host ESXi 6 using a Synology NAS as an iSCSI target. I have 4 nic of the Synology stuck in 1 connection, so it has 4 GB of throughput. So far, over my hosting provider, I have two nic I dedicated to iSCSI traffic. So far, I put vSwitch under 1 two NICs and I was playing with patterns. I put two 1 vmkernel network cards and set as active adapters. However when I watch the iSCSI network traffic I only see traffic on a network adapter. This of course caps my speed to 1 GB. I would like to be able to bind several network cards so I can get a flow more. I tried changing the selection of the path for the warehouses of data in Round Robin are therefore at least two active nic. But which always leaves me with two individual connections of 1 GB instead of 2 GB connection. Is it possible for me to get there or I'm better off just having several 1 GB NIC load balanced?

  I'm not familiar with the Synology. However, what is generally - in the case where the storage system supports - is to set up several uplinks on the side of the target of storage/as well as on the initiator/ESXi side, each with their own IP address. Once configured, you can use multiple paths to access the target. According to the capabilities of the target, Round-Robin (if supported) will send traffic through all the links, i.e. using the bandwidth of all the links.

  André

• Documents with both languages - to remove a possible with XI player pages?

  I have a document that has two languages alternating pages and I've read the document I have to scroll the page the 2nd language. Is there a way to delete / hidden specific pages of a document to display with player XI?

  No, no, unless the file has been specifically put in place to allow that. With Acrobat, you could extract the pages as a new file, but it is not possible with the player.

• How can I create a 'master' document with multiple variations?

  I designed a card that will be displayed to the few dozen intersections with a symbol 'you are here '.  Everyone will be identical except for this symbol.  I don't know if there is a way to do everything while preserving a 'master' card which can be changed at a time.  For example, maybe I need to change the location of the paths, and it would be a real time saver if I didn't have to edit files 20 + (each with an arrow in another spot but otherwise the same) separately.  Also, I'll send the file by e-mail to a professional printer, so I am very uncertain about what would be a standard way to format something like that and don't really want to clog their e-mail.

  I was not able to determine an easy way to do it.  I wonder if it involves the use of several work plans, a feature that I'm not very familiar with, or if it is easiest to have a layer for each location of the symbol and just save twenty records (phew) and send to the printer in the form of separate documents - which seems super awkward.

  I tried to copy the plan of work several times.  It was my best attempt of editing at the same time: I created what I needed on a workplan, dragged to the symbols Panel, then cut, then went to edit > paste on all work plans.  However, this does not simply play with a trace or an object that already exists and I can't understand how I would delete the same object of all work plans.

  If anyone has some ideas, I'm pretty novice, so please keep in simple terms. Also, I'm in a bit of a lack of time, so quick responses are much appreciated!  Thank you!

  If you save a PDF file, you can include layers (just check the box in the second save dialog box) that can be turned on or off allowing a single file in order to have all the data. You are going to have these printed in a professional manner?

• Please I need advice for deployment with multiple screen resolutions

  Hello

  Sorry for my English

  I am developing a project in labview with a PC (screen resolution 1920 * 1080) and I need to deploy to run on a PC with (screen resolution 1024 * 768 10 "), I use several spliters for this so I need some advice to make sure my exe not working

  very well in this PC target so I need to know how to configure my principal vi; size of the window in the execution; etc... in my PC all work fine I can reduce window and blow it up when the project is running and all the objects have been scaling very

  well I don't know what will happen in this target pc.

  advice and assistance please

  Hey Broutchoux,.

  Here are some links of the knowledge base that relate to this issue.

  http://digital.NI.com/public.nsf/allkb/7567EF257B9CFDF986256F630073228F?OpenDocument

  http://digital.NI.com/public.nsf/allkb/4C03BE7BFD1D00948625670B0061CB6A?OpenDocument

  I hope this helps!

• SearchIndex.FindByIP () for VM with multiple NICs for

  If a virtual machine has multiple vNIC and each vNic has its own IP address, the SearchIndex.FindByIp () can support

  VM search based on any of the IP address of the interface of the virtual machine, or the API only supports

  VM look after the IP corresponding host name of the virtual machine?

  Hypothesis: VMware Tools is running on the virtual machine (which is not the case in my lab environment, where)

  I can't test out easily).

  Thank you.

  Hello - I have tested in my lab - SearchIndex.FindByIP () is able to find another IP VM - not just a primary address-based

  The virtual machine tools has been installed on the guest operating system

  HTH

• Id6/dps takes bookmarks for navigation with multiple pages?

  Someone could successfully creates a link via an .indd file Favorites to another indd file intended for the use of the iPad?  I tried to use the button set to destination, but I do not get the desired result.  Example is when the user clicks on a button in doc1.indd I need the link to land on doc2.indd on page 2.

  For each page of doc2.indd, I created separate bookmarks for each page.

  Bookmarks are not supported in DPS. You'll want to use the navto: / / format to create button links. See the following article:

  http://helpx.Adobe.com/content/help/en/digital-publishing-suite/help/hyperlink-overlays.ht ml

• How do scan you a document with several pages using Lexmark printer/scanner

  I have problems I scan a document with multiple pages. I want to scan to open in a single document and not having to open each page.
  Thank you

  You will need to consult the documentation for the printer.

• Mail merge for names with titles cover letter and without

  This is a merger and mailing which suffers from a disease. It's a cover letter, then it starts with "Dear," as Express.ypH below.

  

  As you can see the expensive of course is static and the title, L_name are all variables. Now, there must be a space between the expensive and the title as well as between each of the other data field which brings me to my problem. If the recipients name does start with a title, I find myself with two spaces after dear instead of one. Is there a way to make the spaces after each conditional field data in weather service field is empty or not?

  Thank you!

  Generate the given letters merged, InDesign will put them all in a new document with multiple pages.

  Use find/change with GREP.

  There is a predefined query "Multiple space space" single It will remove the unwanted spaces.

  Fenja